Where keeps N8 a contact image cache ?

I have one or two contacts that does not display the associated contact image either in incoming call, or when calling via quick dial. However, the contact image is displayed ok when calling normally via Contacts. The image is also ok in Nokia Suite and Windows Contacts (as all these are in sync).
The image is usually very small, 95x95.  I changed the image, I tried with both .png and .jpg. I completely deleted the contact from phone and recreated from scratch, no difference. Any contact, new or existing, that happens to have a certain phone number, will not show the contact image in incoming call or quick dial. If I change the number (changing one digit) and call this modified one via quick dial, then the image shows ok.
I suspect that at one point in time there were some duplicates, or something like that, so that in the past the phone was not sure whom image to display. This is no longer the case, but it seems to me that the conflict remained somewhere in some cache.
Any idea where this cache might be ?
Cristi

I noticed that when I connect the phone as a mass storage device all things that access the e: & f: are denied by the phone until it is disconnected. That said, all the contact images are still present. Which means they are on the c: drive. I am curious how much space reach image takes up? Because I an running low on space with only about 60 megs free.
White 808 Pureview NAM
Black N8 NAM
Silver N95-3 NAM

Similar Messages

  • Web template image cache

    goodmorning everybody,
    does anybody know where I can clear the image cache when running a web template.. It keeps displaying the old image even though I replaced the image with a new one in the mime repository...

    hi Joris,
    try
    - WAD menu tools -> setting -> delete cache -> delete cache
    - delete browser cache (Internet Explorer or other)
    and
    - SMICM->go to->HTTP server cache->invalidate->golbal in system
    or transaction rsrt -> cache monitor -> delete
    - transaction RSRCACHE
    oss note 456068
    Mime Repository Icons
    How to clear Cache in SAP BW
    hope this helps.

  • I have created a folder and album where I've renamed the images, yet when I export them, the default to their original numbering. How can I block that so I can keep the newly renamed images as I've renamed them?

    I have created a folder and album where I've renamed the images, yet when I export them, the default to their original numbering. How can I block that so I can keep the newly renamed images as I've renamed them?

    As TD pointed out:
    OT

  • Messages Opening Image Cache Folder when Sending Files

    Messages / iChat seems to be opening my image cache folder every time I send an image to my contacts the image cache folder opens in Finder and stays open with the copied image. Is there a way to get rid of this? It's really annoying. It started happening after I updated to Mavericks.
    Thanks!

    Hi,
    I don't have an answer for this one.
    Are you finding those items are zipped before Sending ?
    Where are they from?
    I get them zipped when sending a pic dragged from a Browser or from iPhoto but not from the Desktop or a Finder window.
    10:44 pm      Tuesday; November 5, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Where do I find the enable cache option in CS5?

    Where do I find the enable cache option in CS5?

    First, define the site.  Go to Site > Manage Sites.  Enter the Local site folder where you want to keep your files. 
    Under servers, add the  FTP log-in details for your remote site as provided to you by your web host.
    Root directory is where your hosting provider told you to upload the publicly accessible files.  Commonly used root folders include public_html, www or htdocs but this varies by host.  If unsure, contact your hosting provider for details.
    When you're done defining your site, hit TEST to verify connection and then SAVE your settings.
    In the DW Files Panel (F8) click on Remote Server and hit the green Down Arrow to GET files from remote site to your local site folder.
    Nancy O.

  • How do I get my contact images to appear in the message plus app?

    My contact images will not appear in the message plus app where the avatar is.

    Press and hold on the body in vz msgs then press and hold on face. Press and hold on face again then choose picture and save

  • How to disable image cache in Mail 7

    I urgently need to disable the image cache in Mail 7. How can I do that?
    Reason: I regularly get mails with image files that are essential parts of customer orders. The image content is different in each mail, but the filename is the same.
    Mail 7 displays the same image in every mail until I restart it, it obviously displays a cached file instead of the original image.
    Where is the Mail-cache-file? Can I writeprotect it?

    I think Private Browsing might be what you are looking for,
    have a look here for more info
    [https://support.mozilla.com/en-US/kb/Private%20Browsing]
    also not sure how much access you have on a company workstaion to change settings in Firefox
    Hope this helps :-)

  • Problem with saving Contact Images?

    In the process of creating a new contact, I took a photo of someone I probably won't see for awhile instead of choosing an existing photo. But when I look for under "camera roll"... I don't see it there. But it still happens to be under the contact. I know you can extract the photos from my computer, but when I tried looking for it in the 100apple folder, it wasn't there.
    My question, do you know where I can find the image I took after choosing "take image" under the contact menu? Especially if I don't use Outlook for sync my contacts... Thanks!

    docs44 wrote:
    I think you misunderstood what the person was saying. looking in the 100App folder doesn't mean it is jailbroken. Mine's not and I can access that. When connect your iPhone to the computer you get the message asking if you want to view the files. Or when it's connected you can go to "my computer" on a PC and access the photos that way too. If you choose to then you can access those files which have photos. The same photos as the camera roll.
    Thank you for the clarification.
    But yes, since he took the photo from the Contacts App and assigned directly from there as opposed to taking a pic with the Photo app and then assigning with an existing photo, the photo doesn't go to the camera roll but just to the contacts database (which is off limits to users). The best he can do is sync and get it from his Address book (though much smaller).

  • Can't change contact images in Address Book

    I am trying to update contact images in Address Book. Everytime I add a new image, it blinks for a moment, then goes back to being black. In my email, the images flit between being available, being old images, and being blank. I've been trying for two hours so it's not a "sync" or "just wait" issue. It keeps telling me that I am a different person, assigning a different contact card to myself, flitting back and forth between contact cards declaring that they are "me," and randomly allowing or not allowing pictures to be updated. What's going on?

    hives wrote:
    Problem solved. Finder > Library > Preferences. There were three files: com.apple.something or another and address book.something.. (I can't remember).
    Please realize that is only slightly more helpful than it started with a letter in the alphabet and ends in plist. Almost everything in that folder starts with com.apple. That is the default naming convention. It is a reverse domain name system (think reverse web address). So all Apple's preferences start with com.apple.
    For anyone trying to fix a similar problem, please don't randomly delete plist files. While most will cause no harm and will get rebuilt automatically, deleting some will cause a little shock and awe. com.apple.mail.plist being the most shocking. If you delete it, you will not see your email in Mail until you recreate your accounts exactly as you had them before you deleted the plist. The email is still there, it is just that Mail doesn't know how to find them.

  • Dynamically loaded images cached?

    We have an xml feed that is refreshed every hour. According
    to the xml file, we dynamically load an image into an html text
    field each time someone hits our page. All of the images have been
    recently updated, but the old ones are still appearing? We use the
    swf?nocache=randomnumber convention to make sure the swf file
    itself isn't cached, but is there anything we can do to clear out
    the cache of dynamically loaded images? If there isn't anything we
    can do, will these all eventually refresh themselves? This is how
    the html is generated where "twcImage[0]" is the image in question.
    Thanks!

    Do the same random number for the images.
    twcImage[0] + randomnumber
    Dan Smith > adobe community expert
    Flash Helps >
    http://www.smithmediafusion.com/blog/?cat=11
    http://www.dsmith.tv
    "Wolli World" <[email protected]> wrote in
    message
    news:fvvcrc$k9o$[email protected]..
    > We have an xml feed that is refreshed every hour.
    According to the xml
    > file,
    > we dynamically load an image into an html text field
    each time someone
    > hits our
    > page. All of the images have been recently updated, but
    the old ones are
    > still
    > appearing? We use the swf?nocache=randomnumber
    convention to make sure
    > the swf
    > file itself isn't cached, but is there anything we can
    do to clear out the
    > cache of dynamically loaded images? If there isn't
    anything we can do,
    > will
    > these all eventually refresh themselves? This is how the
    html is
    > generated
    > where "twcImage[0]" is the image in question. Thanks!
    >
    > twcTarget.text = "<img align='left' hspace='5'
    vspace='0' src='
    http://" +
    > _root.server + "/rss/weather/images/" +
    > twcImage[0] + "'>" + "<condition>" + ... and so
    on
    >

  • Google Contacts Images (It's driving me nuts!)

    Hey everyone! I have been a long standing Blackberry user, and for the past year I've been using Android and one of the best features of Android is how closely my device was tied to Google (Calendar, Mail, Contacts, etc). 
    I'm back to Blackberry! I love the 9900! It's a fantastic device! (maybe not the camera, but everything else yes!). 
    BIS offers Google contacts syncing, but no contact images. Google has the GSync tool, which doesn't offer syncing of images either while it does offer Google Calendar syncing of multiple calendars on my account which is just fantastic.
    I've tried multiple ways of getting my contact images onto my computer then sycning via outlook to, but it gave me a lot of problems, while it did give me contact images.
    Please, can anyone offer any way to get images for my contacts? I have over 1,100 contacts (for work) and keeping an image helps a lot and this seems like something SO Basic!
    Does Blackberry Protect offer image backup, too? I could sync ONCE to OUtlook then to my BB, then just use Blackberry Protect. Or does anyone have any ideas!? 
    Thanks a lot! 

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Why does my mrs phone keep getting my contacts from iCloud and more importantly how do i stop it!?

    Hey guys an gals sorry if this has been asked 100's times before but...
    Why does my mrs phone keep getting my contacts from iCloud and more importantly how do i stop it!?
    Thanks for your help :-)

    Thanks for you reply, she already has her own account and wants to back her own contacts up to the cloud, we have tried turning both contacts off in icloud settings, also deleting from phone when prompted, then, we also deleted all her icloud backups to start a fresh. However soon as she turns contacts back on.. Bam they re appear. We also have ipad in the mix so we did the same to that, turned off and deleted contacts on there also to no avail. Somehow they are linked to my acount just cant work out how or where?

  • MSN MESSENGER KEEPS READDING MY CONTACTS

    Hi guys
    Msn messenger keeps readding my contacts and driving me nuts. does anyone know how to solve this problem?
    Thanks

    Hi,
    Welcome to the    Discussions
    I can give an answer as if this were iChat and you may find it applies to the MSN app.
    In the iChat Preferences you can set an Account/Screen Name to Allow Multiple Logins.
    This allows you to Login from more than one App (using the same Computer) or from multiple Computers (like work and home).
    To Alter the Buddy List, specifically when trying to delete a Buddy you have to be only Logged in once.
    Otherwise the Other Login can override the deletion as it is reconfirming that person/Contact as a Buddy.
    9:40 PM Wednesday; November 24, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • I need to sync my iPhone to new user id on the same mac.  How do I keep my iPhone contacts and music library?  I tried to sync and iTunes wanted to erase both.

    I need to sync my iPhone to new user id on the same mac.  How do I keep my iPhone contacts and music library?  I tried to sync and iTunes wanted to erase both.

    When you say a new user ID, are you referring to your Apple ID that you use to make purchases in the iTunes Store, etc? Or are you talking about a new user account on the same Mac?
    iTunes alternatives
    http://www.wideanglesoftware.com/touchcopy/index.php
    http://www.ecamm.com/mac/phoneview/
    http://www.copytrans.net/

  • ICloud keeps duplicating my contacts, any of which I need to delete anyways.  Is there a way to delete multiple contacts at once? I  have been deleting them one at a time, but they keep reappearing.

    ICloud keeps duplicating my contacts, any of which I need to delete anyways.  Is there a way to delete multiple contacts at once? I  have been deleting them one at a time, but they keep reappearing.

    I have exactly the same problem!  I have Outlook 2010 and it does the same thing with my contacts, and calender enteries!! Really frustrating

Maybe you are looking for

  • How to create 3 levels of detail based on Wizard code

    I have 3 tables: Orders, Recipes, Ingredients. An Order can have several Recipes attached, and each Recipe has multiple ingredients. I want to create a data entry form for these 3 levels of detail. What I have in mind is a window which shows a form f

  • Hold on Frame until cuepoint = end

    Hi all, I am still struggling with a basic problem (yes I am a lingo newbie). Simply, I want to hold on a frame until a sound is finished. I am trying to write something that checks if the cuepoint "end" is reached, else it loops. If cuepoint "end" i

  • Flex Diff Algorithm

    A guy named Paul Butler made a diff algorithm for PHP.  It compares two strings, and shows you the differences between the strings.  The original PHP code is here: http://github.com/paulgb/simplediff/blob/5bfe1d2a8f967c7901ace50f04ac2d9308ed3169/simp

  • What am i supposed to do with this?

    I cannot believe how rapidly Apple has declined since Steve Jobs.   About a year age a bought a mini mac. what a great tool. Very fast, ran all my graphic programs and was able to burn projects to DVD.   So A few weeks ago bought a new mac mini and i

  • Ops Center EC upgrade error's with no DB table space

    Hi I am not a DBA so not sure what to do, all I know is the ASM disk group still has plenty of disk space, I am trying to upgrade EC from 12.1.1.2076 to 12.1.2.2161, but the installer is exiting with an error of no DB space. below if the db error log