Where on my HD can I check which RAW compatibility files are installed?
I know from the Apple Support page which cameras are supported but I have not been updating RAW compatibility files via Software Updates.
Will installing the latest 5.01 Update automatically update to install the whole list of cameras? Or will it only install the few latest cameras listed as 5.01, please?
Many Thanks, sberman
I see that 2 of the cameras I am about to purchase are already on the Supported by Mavericks list and so I don't need to install the 5.01 Update which lists cameras I don't have or use.
The SSD built-in on my iMac is filling up (OS and Applications only) and so I try not to install software which I don't need, hence my question.
In any event, when I have bought my cameras, shot RAW, and uploaded the images I expect I would be seeing an OS notice if their compatibility wasn't present.
Similar Messages
-
How can I tell which Apple Security Updates are installed?
While troubleshooting a printer issue, I installed some 'Extra' printer profiles from my OS 10.6 Install DVD. After which, I got a dialog box from the Installer saying that I may have replaced some newer items with older ones, and it suggested I run the latest OS "Combo" installer. Which I did, even tho Software Update said I was up-to-date.
But apparently, when I ran the "Mac OS X 10.6.8 Update Combo v1.1" -- it downgraded some of my Apple software to older versions. For example, I know for sure Safari was at 5.1.2 before I ran the Combo, and it's now at 5.0.5. Yet Software Update is not telling me about v.5.1.2, which it shows as already being installed (at a date prior to me running the Combo updater).
So my question is:
What other software might have been downgraded by the 10.6.8 Combo v1.1 -- and if Software Update thinks I running the current versions, how am I going to find out for sure?
Obviously, I can check version numbers of my installed Apple software like iTunes and Aperture against the latest updates available at Apple Downloads, but I don't know how to check on background files like Security Updates, Java, etc.
I am particularly concerned that I am running the latest Security Updates.
Thanking you in advance,
- gwsteve626 said:
"... There you will be able to see if a more recent version of Safari, etc. was replaced with an older version."
Not exactly. That screen shows my most recent Safari update was 5.1.2 on 12/16/11 -- then it shows the Mac OS X Update Combined was installed on 1/2/12. That's when my Safari got downgraded to 5.0.5, but that detail is missing from the Installed Updates preference pane.
It looks like once an update gets installed, Software Update remembers that -- but does not take the newer update off the list if an older version replaces it???
So, even though I see Security Update 2011-006 was installed on 10/21/11, I'm not sure if the OS Combo Update replaced any security items with older bits. Is there anything specific to security updates that I might be able to check?
-gw -
Help! How can I check whether the developer tools are installed on my iMac?
Hi, I'm new to macs and would like some help with finding out whether or not the Developer Tools are installed on my iMac.I don't remember having any sort of installation CD/DVD.
ThanksWelcome
http://developer.apple.com/search/index.php?q=xcode
Apple Developer Technologies Overview - Apple Developer -
How can I check which documents are stored on iCloud?
How can I check which documents are stored on iCloud?
Welcome to the Apple Community.
You can see in a number of ways, the easiest is probably by logging into your account at ...
iCloud.com
on your computer. -
how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris
If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
Or are you asking how to check it at runtime?
If you want to see externally what is actually loaded by an app you can use process explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
If you want to check it in the app itself:
http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
Hope it helps,
Greg -
How can i know which version of Smartview is installed on my system ?
Hi All,
How can i know which version of Smartview is installed on my system ?Do you know what version of Essbase you are running? that could help. You can find that in EAS. Right click on the server name and select edit ptoperties, then look on the environment tab. As a final measure, find the smartview.exe on yout machine right click and select properties. in one of the tabs there might be a version number
-
Which Illustrator CS3 files are editable in Microsoft Word?
Dear all
I need to design something using InDesign and Illustrator CS3 (or just one of these depending on the responses I get).
Is is possible to save a particular file type out of either Illustrator or InDesign which can then be opened & edited in Microsoft Word (on a PC)? It would mainly just be text which would need to be edited in Word afterwards.
Thanks in advance,
Adam>Which Illustrator CS3 files are editable in Microsoft Word?
None of them.
>Is is possible to save a particular file type out of either Illustrator or InDesign which can then be opened & edited in Microsoft Word (on a PC)?
You can export text from InDesign and open/edit that text file in Word, but you will not get layout, page size, columns, margins, or graphics. You can export art from Illustrator as EMF or PNG (I much prefer PNG) them import those graphics normally and position as you want.
Making your Illustrator or InDesign file into an editable Word file means doing a lot of it over again in a much worst interface. -
How can I keep my RAW photo files from converting to JPEG???
How can I keep my RAW photo files from converting to JPEG???
Hello briggiebunny
If iTunes can read the movie files, then you will need to create an iPad version by going to the drop down menu File > Create New Version > Create iPad or Apple TV Version and then syncing that newly created file.
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
http://support.apple.com/kb/ts1497
Regards,
-Norm G. -
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting? -
ITunes can not run because some required files are missing.
I got a message that said something like "iTunes can not run because some required files are missing. reinstall itunes." I tried to reinstall iTunes but I kept getting that message. So, i uninstalled it, and tried to install it again. this did not work. I think that Quicktime is actually what is broken, because iTunes installs fine, but the Quicktime installation failed. When the installation failed, i got a message that said, "Installation failed: error code: -3"
I then tried installing Quicktime with the standalone installer. The installation got further, but it then failed as well, giving the error code -1603.
What can I do to get this reinstalled, and if you can't answer that, how can I contact Apple from Iraq? Thank you.hmmm...that happened to me at one point to, and I'm trying to think back, I believe I was able to uninstall it by using the standalone installer.....
Try these steps and see if anything helps, and then in the troubleshooting section, look up the specific error number you are receiving...
http://docs.info.apple.com/article.html?artnum=93976 -
What Raw camera files are supported by Aperture Ver 3.6. I have tried to file a list of compatible camera models, but as yet can't find one. My OS is OS X Yosemite 10.10.1. I have recently bought a Canon 7D MkII and have found Adobe Lightroom does not as yet support the 7D MkII. So I though Aperture may support the 7D MkII because Yosemite 10.10.1 now does.
Hi Folk,
I just found the answer to my question. Yes it is supported with OS X Yosemite 10.10.1. See the link below and the ***** Note at the bottom of the list.
http://www.apple.com/aperture/specs/raw.html -
I just purchased lots of music yesterday from itunes and amazon but now can't load onto ipod because files are not found.
elkelawdog wrote:
I think I had an old itunes id.
Either you did or did not. Do you not remember?
elkelawdog wrote:
But it never let me burn them to anything other than my Ipod.
Media is not burned to iDevices. Burning an iDevice would destroy it.
Why will iTunes not allow you to sync media to the iDevice? What happens when trying to sync media to an iDevice?
elkelawdog wrote:
I changed my password so now when I pull up my account there is no music.
Changed password to what?
Pull up what account?
What does this have to do with iTunes?
One does not pull up an account to access their media, they simply launch iTunes.
Changing a password has nothing to do with accessing the media on the computer when one launches iTunes.
What is the actual issue that is occurring?
elkelawdog wrote:
Can anyone tell me how to find my old account and then copy that music to my HTC One.?
iTunes has nothing to do with putting media on a non-Apple device. -
i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on
Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.
-
HT4757 Can the digital camera RAW compatibility update 3.13 work for iPad?
Trying to transfer photos from my Nikon 3200 to iPad using the camera kit. Can the digital camera RAW compatibility 3.13 update work for iPad? Attempts to download it directly to iPad sends it to Evernote and then message comes up that synchronization failed. Not a tech geek by any means so if you can help, please explain as simply as possible. Thanks much.
45 views and no replies? Isn't there anyone that can answer if I need this update or not or is my question not clear? Does anyone else have a similar question relating to the Digital Camera Raw compatibility update 3.11?
-
I conceive iCloud as a virtual HD from which my devices can access data and, more, which will share same info. between all registered devices. I use MacBook Pro, Iphone 4s and iPad and they are not the same. What do I do? Where can I check wich devices, and what applications are supposed to be shared? Thank you in advance.
Be sure you devices are sign into the same iCloud account, then turn the data you would like to sync with iCloud to On. These settings on your iPhone and iPad are in Settings>iCloud. On your Mac, they are in System Preferences>iCloud. This guide explains how to set this up: http://www.apple.com/icloud/setup/.
Also, if all your devices are signed into the same iCloud account, any data they sync with the account (such as contacts and calendars) will be merged with the data from other devices using the account and the merged data will appear on all connected devices.
Maybe you are looking for
-
Mod_jk load error with Apache on OS X
Hello - I have been running CF9 on OS X with a MacPorts install of Apache 2.2.21 with no issues as a "standalone" server installation. To get ready for CF10 I have ben trying to get CF10 configured with Apache. The specefic error I am getting when la
-
when i try to install itunes i get an error that says to verify that i have sufficient privilege to start system sevices. I am the system administrator.
-
To post write up in the current fiscal year
Hi, I am trying to post write up in the current fiscal. However, the system is not allowed to post me. I know that the write-up needs to be posted from the next fiscal year. However, due to the requirement, we need to post in this current and switch
-
How do I outline an object with a dash line in Photoshop CS6?
How do I outline an object (silhouette figure) with a dash line in Photoshop CS6? ... never was this difficult.
-
Strange red light in back of the system.
Hello everyone, I just received today my new-like condition G5 Quad today and I have a question regarding the red light in the back. Where I see the digital audio ports I noticed a red light on. Is this call for concern, or is this normal? Also, the