Where's input select for electric guitar patch

Trying to record with full band.Drums and bass are under Real Instruments.Want to use Electric Guitar patch with the effects but when I use it my interface won't bring up the input screen.is there a way around this. Thanks.

I"m extremely thankful.This sight is a Godsend.Kudos to all !

Similar Messages

Macbook Pro May 2010 Input Line for electric guitar

Hi, i've bought a new macbook a few days ago, it's my first mac and i saw that i can connect my electric guitar to my macbook, but the question is how do i do that? I've seen over the internet possible solutions but what i can't understand is how to configure the "line in" jack on the mac...is it possible to connect the guitar over the USB or Firewire?

It is possible to connect the guitar via USB or FireWire, through any of the USB and FireWire audio interfaces that are offered by third-party manufacturers. That's probably a better option than connecting an analog cable with a mini phone plug directly from the guitar to the audio-in port on the MBP. You'd be able to match the input level to the MBP much more effectively by using an external interface.
I'm not a musician and can't suggest any particular interface.

From where can I select for the apps store according to my own country?

From where can I select for the apps store according to my own country? I am from Malaysia, just now the message pop out and ask me want to switch to USA store and I choose ok!

The Complete Guide to Using the iTunes Store | iLounge Article
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
You can change the country / region on your iPod > iOS: Changing the signed-in iTunes Store Apple ID account

Cheap i/o device for electric guitar?

hi. i've recorded on an analog four track for years but now want to make the switch to digital recording with my mac. what is a cheap but decent external i/o device i could use to record my electric guitar on my mac without an amp? thanks in advance.

There are lots to choose from, but this might fit your needs, and is inexpensive:
http://www.presonus.com/inspire1394.html
It's also somewhat expandable (you can hook up more than one) and it gives you mic preamps as well as Hi-Z inputs.
For something even more basic, check out Griffin Technology - they have cables and adapters.

Recommendations for Electric Guitar to USB interface?

I'm interested in purchasing a guitar-to-USB interface for my MacBook Pro. This Spring '11 model does not have an audio input jack, so a 1/4" to 1/8" converter is not an option. Can anyone recommend a relatively inexpensive interface that works well with the amps offered in GarageBand (v.6.0.4)? Thanks!

isteveus wrote:
Csound1 wrote:
isteveus wrote:
All Macbook Pros have audio input. It probably shares the same jack as the headphone.
Both the gain and the impedance are wrong for an electric guitar pickup, not a good idea.
Why not a good idea. It's cheep, it works and thousands of people do this every day.
Of course a audio interface is the way to go but if you just want to mess around with with garageband or do the guitar lessons there is no problem using the audio input.
Some single coil pickups may not have enough gain to get a good signal.
Read up on Ohms law

I need the Pink Floyd sound effect for electric guitar

Can anyone please tell me how to setup the electric guitar effects to sound like David Gilmour's from Pink Floyd. Thank in advance.

Maybe I have what you are looking for. I created a set of presets for Guitar Rig 3. Visit My Site and Learn:
http://www.audivide.com.br/dg-stage-toque-pink-floyd-com-presets-especialmente-c riados-para-o-guitar-rig-4-native-instruments/
Tks!

IMic adequate for electric guitar recording?

Hello there,
Just like the message subject indicates ... any experience/feedback as to how well the iMic (Griffin Technologies) performs (e.g., sound quality, static, etc.)? Many thanks for any input you may provide.
Jacobo
PS - for potential use in new iBook

Hi Jerry,
D.I means direct injection. This is box used on stage to connect your instrument or microphone directly in the PA (that means you don´t need an amp). You can lift the signal from ground to cancel the hum or noises catch by your input or your computer.
2 sorts of DI boxes: Active DI (direct) boxes especially designed to suit musical instruments with piezo pickups.
Have a look on: http://www.leonaudio.com.au/active.htm
or passive: for the other types of pickups, please look at: http://www.leonaudio.com.au/passive.htm for further explanations.
The box should cost between 50 and 100 /$.

Input selection for PO in Mass

pls tell me how we block po in mass t.code?
in which field it will ask for PO no?
here we put objet type or variant name...
n when we runing it then system showing msg.. variant not found
Regards
Rekha

As I expected, the message has nothing to do with the mass transaction. Make the message a warning, then you can do what you want. but it is on your own risk:
More detail from the message long text:
If Funds Management (FM) is active, purchase order items cannot be deleted if goods receipts (GR) and/or invoice receipts (IR) exist.
The deletion of purchase order items should not be allowed except when the follow-on documents have been reversed in both MM and FI.
You can only delete a purchase order item when the corresponding follow-on documents (IR and/or GR) have been reversed.
In the current case, the GR balance is and the IR balance is (both in the transaction currency ).
The message severity of this error message is variable. The default value is 'E' (error). This can be changed to 'W' (warning) or 'I' (information), or the message can be surpressed.
Note that balancing problems between MM, FI, FM, the budgetary ledger, and SPL documents (if active) could occur if the deletion of purchase order items is allowed.
When archiving object MM_EKKO, FM is not updated and the message FICUSTOM 201 is not regarded. Only the MM data is updated, so the Customizing for this message does not affect the setting of the deletion indicator using archiving program RM06EW30.
If you want, you can implement user exit EXIT_SAOLFMOI_009 to skip the deletion of the purchase order without regarding the user ID.

TS or TRS for electric guitar to amp

Quick question... when i'm running a cable from my fender strat to my vox valvetronix amp, do i want to use a TS or TRS cable?
Thanks!

TS

How to put Dynamic Query description based on the Input selections?

Hi All,
I have a requirement wherien there will be 4 input selections for a report namely A, B, C & D alongwith Fiscal year period. wherin Fiscal Year period will be mandatory field
Now, the output of the report should show the description of the report as follows:
For E.g: if Fiscal year Period = 011/2011
When User Enters input value for 'A', then report nameshould be displayed as A 011/2011
When User Enters input value for 'B', then report nameshould be displayed as B 011/2011
When User Enters input value for 'C', then report nameshould be displayed as C 011/2011
When User Enters input value for 'D', then report nameshould be displayed as D 011/2011
Please advice if this requirement is possible and if yes, please guide me how?
Thanks& Regards
Sneha Santhanakrishnan

change the code as below and see
WHEN 'ZREP_DESC'.
data: wa_data TYPE rrrangesid.
      CLEAR : wa_var_range.
      READ TABLE i_t_var_range INTO wa_var_range WITH KEY vnam = 'ZVALUE'.   "ZVALUE is variable for A,B,C,D field
      l_no = wa_var_range-low.
      CLEAR wa_var_range.
      READ TABLE i_t_var_range INTO wa_var_range WITH KEY vnam = 'ZFISCPER' iobjnm = '0FISCPER'.
      IF wa_var_range-low IS NOT INITIAL.
        gv_var = wa_var_range-low.
concatenate l_no gv_var into wa_data-low
      ENDIF.
      wa_data-sign = 'I'.
      wa_data-opt = 'BT'.
      APPEND wa_data TO e_t_range.
ENDCASE.

How to change audio port output to input port on mac os x 10.9.2 to connect electric guitar on macbook pro for garageband

How to change audio port from output to input port so that i can connect my electric guitar to play along with garageband. I couldn't the option to change it in my system preferences of sound as my mac os x is 10.9.2. So please help me!!!!!!!!!!!! I want to play electric guitar with my garageband so badly!!! :O
Mac os x 10.9.2. ; Garageband 10.0.2

There is no audio line input on your Mac, get a USB interface, get one that is specified for guitars.

I'm using my electric guitar with GarageBand. With the input/output jack being full of my guitar cord, does anyone know if I can rig a BlueTooth speaker for output? Thanks in advance for any response.

I'm using my electric guitar with GarageBand. With the input/output jack being full of my guitar cord, does anyone know if I can rig a BlueTooth™ speaker for output? Thanks in advance for any response.

yes this will work
you can also get a splitter cable that goes in to your in/out port so you can have 2 (or more) separate ports

I am trying to run my electric guitar in garageband 11 but there is no options to modify the inputs/outputs to built

There is no option to modify the sound input/output to built-in input or built-in output. I'm guessing the electric guitar is not being registered. I am using a 1/8" mono -1/4" mono cable to go directly from the output jack on my electric to the headphone jack on a macbook pro. How can I get this to work?

When you use an external device for input, GB often automatically selects that same device for output. It's an ease-of-use feature for most external devices. If your device doesn't give you the option to output to speakers/headphones, you don't want GB to do that.
Within GB, go to GB>Preferences, Select the Audio/Midi tab. In the Drop-down under output, choose "Built-in Output" and connect your external speakers/headphones to the Mac's headphone port (Alternately, you could use system preferences to direct your Mac's audio-output to your speakers and select "System Setting" in GB Prefs. The Mac's own speakers aren't going to be nearly as much fun as running it to your big speakers/headphones).
Hope that makes sense...

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces?

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....

Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled.

Good audio device for my electric guitar (fasttrack-ish)

Hi All
My M-Studio fast track died yesterday (the headphone connector is sending back just one or the other channel, and the guitar input works randomly); so i have decided to get a new one.
Before buying another fasttrack, i was wondering if there is anything else that can be used on a mac pro 1.1 (either firewire or usb does not matter; all that i need is a decent device to play my electric guitar that does not cost an arm and a leg)
Basically what i want to do is to connect my device to my mac, plug the guitar in and play; and get the sound out of it instead than getting it from my mac.
The mic connector is not essential at the moment, but is a nice plus in case i decide to record mic too; the extra output also is not really essential, since i would record directly on my computer, so i do not need outputs other than one for the headphones (or for a pair of speakers on my desk).
The input that i need are basically the jack for the guitar, and would be nice to have a couple of RCA in, so i can plug my xbox 360 output, instead of plugging it into my line-in on my mac pro; the keyboard is plugged via midi or via usb, so midi ports could be useful.
I've seen various reviews of devices like the fasttrack and the mobile pre; and know for sure that they work on mac with snow leopard; then i checked the tascam but many people are still in uproar for the fact that the drivers on SL are not working as they should, so i would pass on that unless someone can confirm me that everything works fine 100% of the times (this is not windows with the driver ****, right ? :P)
There are many other options, but they work on PC and i do not want to buy something that is not 100% working for my mac pro; I use guitar rig 4, logic and garageband, plus the device gotta work as sound card, so i can route all the audio trough it and avoid to plug my headphones to the mac front port.
I am sure that many of you went trough the process already, so you have tried already various devices....i am acquainted with Windows so i do not really know what does work on a mac.
Thanks!!!

The best sounding I/F under $300 ($249) is the Apogee One. It is the "little brother" of the Duet.
You will NEVER need an upgrade from the sound this device produces. And you can use a Mic (both dynamic and condenser) with it.
Here is a link to device info:
<http://www.apogeedigital.com/products/one.php>
Here is a link to where you can buy it with some reviews:
< <a class="jive-link-external-small" href="http://">http://www.sweetwater.com/store/detail/One/>
Best of luck.

Where's input select for electric guitar patch

Similar Messages

Maybe you are looking for