Where's my other site?

I see other posts that seem relevant, but I can't understand why I can find the actual indexes and folders with my first stie but when I created a new site, none of the specific pages show up. I do not use .mac because it is way too expensive for what you get. I want to be able to work with files. WHere the heck are the files. for my second site? It makes no sense that the file sfor site 1 are where I can work with them but not site 2. Having to use different logins for each sit., as one user suggested, is sort of stupid if you ask me.
I am still using 2006 because I cannot get 08 because I am not in the U.S. and Apple does not offer a download of O8. You have to get the box. I'm in COlombia and Apple's footprint in Colombia is miniscule.
Anyone out there able to help.

Are both of your sites shown in the site organizer over at the left inside the iWeb app? If not, one may have been deleted from iWeb's data ( the Domain file). In that case you will have to recreate the site (unless you have a backup somewhere).
http://homepage.mac.com/thgewecke/iwebdata.html
Or did you intend to create separate Domain files for your sites but that didn't happen or it did happen and now you can't find one?
In any case, when you publish to a folder on your local drive, all the files for whatever sites are published are sitting in that folder. If you have mulitiple sites, there will be multiple site folders inside that, plus one index.html which points to whichever site is topmost inside the iWeb app.
If you are talking about stuff being missing on your server, that's a completely different issue.
Perhaps if you provide more detail about exactly what you are doing to create and publish and upload sites someone can offer better help.
Using different logins is just one way to ensure you get separate Domain files for separate sites, but there are other ways to do the same thing by manually manipulating Domain files, etc. Also I don't think O8 offers any advantages for the procedure you are using.

Similar Messages

  • YIKES!!! Using Site Separation - Where Has My Other Site Gone????

    I have two sites I've been working on in iWeb with each site destined to go to different servers. I worked through the Site Seperation system and feel pretty sure that I followed it step by step. BUT, when I went to work on the folder of my second site, it was deleted and the first site is the only one appearing in the folder for each of the sites.
    Is the second site lurking somewhere and I just can't find it? Is it in some area of the trash where it can be reclaimed? It's even missing from my master backup file that held both sites.
    Was I supposed to delete the pages of the other site from somewhere other than the main edit command in iWeb?
    Any help in reducing my current state of panic would be appreciated.
    various   Mac OS X (10.3.9)  

    iWebsites is an application that works quite well at handling multiple sites. Here is a thread, among many.
    http://discussions.apple.com/thread.jspa?messageID=4418192&#4418192
    Pay attention to just about anything Varkgirl says concerning iWeb. She is amazing.
    http://discussions.apple.com/profile.jspa?userID=538675

  • How do I erase a "dropdown" suggestion where i sign in to hotmail? I don't want to disable this feature from other sites

    I accidentally typed a wrong email address one time, and now it shows up every time I go to sign in. I don't want it showing ever, but don't want to necessarily disable (erase) this ability on all other sites.

    Use these steps to remove saved (form) data from a drop-down list:
    #click the (empty) input field on the web page to open the drop-down list
    #highlight an entry in the drop-down list with the mouse or cursor Down key<br>do not click the mouse or press the Enter key
    #press the Delete key (on Mac: Shift+Delete) to delete the highlighted entry
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    You can inspect and manage saved user name and passwords in the Password Manager.
    *Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"

  • Downloading Apps from other sites help please.(sideloading apps)

    I have been trying to download Apps for my playbook from the Good E Readers site and have installed the DDPB installer but i am having problems with it.
    When i try to install the App from pc to playbook using the installer it gets as far as half way then a little box comes up saying Done and the App is then showing on my playbook.
    but when i click on the App on playbook a message comes up saying loading please wait but thats it.
    so why is it only getting as far as half way when downloading from pc to playbook?
    i have contacted them and they are not much help.
    is there any other sites that i can download more Apps?

    Another way that works with WiFi on Windows, Intel Macs and Linux.
    You install Chrome browser on your computer that you are using to download and sideload apps to Playbook.
    Then you add the extension 'Playbook App Manager' from Chrome's Spanner, then Settings, Extensions, then Get More Extensions (or Gallery if you have none yet)
    Download the required .bar file from Goodereader.com (Playbook Apps) to your PC downloads folder.
    Have both computer and Playbook connected by wifi to your router. (No usb cable!)
    Ensure File Sharing and wifi sharing are enabled in Playbook (Settings, Storage and Sharing)
    Put the Playbook in Development Mode (Settings, Security, Development Mode) and add a password, preferably your normal Playbook password.
    Look at the IP address of the playbook by tapping the Development Mode icon when you top corner swipe.
    It will begin 192.168. when using wifi.
    Go to Chrome in the computer and go Spanner, Settings, Extensions, then select “Options” in Playbook App Manager.
    Type the IP address you noted in Device Hostnames/IP
    Click Save
    Click on the IP address where it says ‘manage your devices’.
    Ignore the big red warning and click “Proceed Anyway”
    Enter your password you added in dev mode and click Log In.
    A list of all playbook apps will appear.
    Click on the Install button
    Go to the folder where you downloded the .bar file from goodereader.com and click on open.
    The app will be sideloaded.

  • When I click on a link I get sent to a bunch of other sites and the problem doesn't occur when I use windows internet browser.

    When I click on a link, whether e-mail, yahoo or other search engines, E-bay, Amazon, etc. I get sent to another site. If I click back and then re-click on the original site I get sent to where I wanted to be. While I am browsing on a web page of any of the above, or other sites, I sometimes get a voice ad or possibly a video, but I can't locate it or turn it off. This does not happen when I use windows internet, or it's Google chrome internet, only with Firefox. I have used Ad aware, and Mal-bytes anti-virus but they come up blank.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Where did the Secure Site Icon go ?

    I know the status bar was removed and an and on bar replaces it but
    Where did the Secure Site Icon go ? Will not use FF without it !
    I cant find anything about it. ( FF 40b7 ) How do I get it back ?
    Not so little things like this will hurt FF. And YES I understand this is beta but come on guys/gals this is IMPORTANT !
    I probably just missed something stupid but I could use some help please.

    Every financial institution (bank, credit union,...), every news outlet (print/TV/Radio/blog) reaches out to millions of elderdly folks and other non-geeks and tells them to run away as soon as they dont see a Key or Lock on a secured page (or maybe so-called secured page from what I get you are trying to push through).
    This is a major Change Management disaster waiting to happen... Not just for Firefox but for every web site using secure transactions. Countless organisations are going to get calls from users telling them, "Your site is not secured, Oprah and CNN told me so".
    Go for color scheme or other visual indicator to warn of security level, but absolutely dont lose the icon !
    Regards,
    Stephane

  • Can't access a web/mail server, but all other sites show up fine

    Going nuts here. Not sure if this is a network issue, Safari issue, OS issue....
    I have an Aiport Extreme going into a cable modem. I have one hard wired iMac and several WiFi devices, including a MacBook Pro and an iPad running off the wireless network. Everything's been fine until...
    As of last night, I am unable to pull up my professional web site or check my e-mail. Either the iMac directly connected to the APE (AirPort Extreme) can access it nor can my wireless devices on the wireless network. Every other site I draw up comes up just fine and I can access e-mail on other services (MobileMe for example). I have tried using Safari and FireFox on the Macs to test it also. Connection times out.
    I have asked other people to pull up my web site and it comes up for them just fine every time. If I use my iPhone and turn off the wireless netowrk and just go over the 3G, my site and e-mail come in just fine.
    I went into the APE and changed a few settings with no change. I then changed the mode from Shared Access to Bridge Mode and success, I was able to access my web site and e-mail again. However, this disables the network and any Internet sharing. Not viable. When I turn on the sharing again, the same problem happens. Right back where I was.
    I have tried ordering the router to renew the lease...no joy. I'm at a loss. When I PING my web site address, I get " Request timeout for icmp_seq # ". Any idea what to do?
    Thanks.

    Just had a thought....was trying to rememberif anything changed last night. I think I installed a mac OS X Security update. That's about the time the trouble started. Any ideas? Thanks.

  • I can't access hotmail or gmail. I get the message "unable to connect to the server". However I can access both msn and google main page and not problems with other sites. Any ideas of what to do?

    Cannot access hotmail or gmail, although no problems with the actual msn home page or other sites. I get the message: Firefox can't establish a connection to the server at .....
    == URL of affected sites ==
    http://login.live.com; http://www.google.com

    Hi thanks for reply.
    No, not that I'm aware. How/Where can I check this?
    The only think I've done recently is install a different antivirus program and uninstall the old one which had expired. Not sure if this is linked to the problem...?

  • 2013 Workflow Service - Enabled for Other Site Collections

    I have setup the 2013 workflow service with our SharePoint environment. This works fine with the site collection originally used to register the workflow service.
    The other site collections (in the same web application - we are using host named site collections) cannot see this, and SharePoint designer gives the error: "The option for the SharePoint 2013 Workflow platform is not available because the workflow
    service is not configured on the server".
    Now as the other site collections are in the same web application, the have the service connection to the "Workflow Service Application Proxy".
    I have also seen posts about running a "Enable-SPFeature" command on the other site collections to enable WorkflowService or WorkflowServiceStore but this only returned an error (essentially) saying the futures were already enabled.
    Where else can I look to try and diagnose what is wrong or what can I do to allow the other site collections to get access to the 2013 workflow service?
    Thanks,
    Richard

    Hi,
    According to your post, my understanding is that the SharePoint 2013 workflow platform not worked in other site collection.
    Did you enable the workflow service application proxy? You can enable it as below, then check whether it works.
    Whenever a new workflow service application proxy is created in SP2013, by default it will not be associated(service connection) with any web application.
    You can go to Central admin site->Manage web applications page -> Select the web app which was registered earlier during configuration and check " workflow service application proxy" and click OK.
    Did the workflow platform work in other web application?
    If they all not work, I recommend you reconfigure the workflow manager, you can also check the steps with the following articles.
    http://ranaictiu-technicalblog.blogspot.com/2013/02/sharepoint-2013-workflow-manager.html
    http://technet.microsoft.com/en-us/library/jj658588.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Where to find which site profile assign to which site any t.code or path

    Hi experts
    where to find which site profile assign to which site any t.code or path
    regards

    hi friends
    just i find this
    go to WB02 OR WB03 ITS CHAGE SITE
    enter
    then go to extra tab then go to additional tab (ctr 9)
    or blue colour icon u can find on left side of screen its additional information tab click on it
    you will see which site profile u assign for that site
    Regards

  • How do I get icons for my yahoo email, Face Book, You Tube, and other sites that I use a lot?

    In the past I had icons on my toolbar for my Yahoo email, You Tube, Face Book, and a lot of other sites that I use a lot, but I can't find where to get them to add to my firefox tool bar.
    Also I have a lot of plug ins that I'm not sure I need, is there any way you can tell me what I need or don't need to keep?

    I disabled acceleration in the flash player by linking to http://kb.mozillazine.org/Flash#Troubleshooting and scrolling to the line that specifically outlined my problem - split horizontal screen with green line - clicked on the flash link then right clicked the flash icon and ticked disable acceleration.
    I also uninstalled and reinstalled more programs then I probably need to.
    We will see how long it lasts* site explains it may not be permanent

  • Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

    Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

    Download iOS 5.1
    iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
    iPad 1
    iPad 2 Wi-Fi
    iPad 2 GSM (AT&T)
    iPad 2 CDMA (Verizon)
    iPad 2,4
    iPhone 3GS
    iPhone 4 GSM (AT&T)
    iPhone 4 CDMA (Verizon)
    iPhone 4S
    iPod touch 3G
    iPod touch 4G
    iPad 3 Wi-Fi
    iPad 3 GSM
    iPad 3 CDMA
    Apple TV 2 (9B179b1)
    Apple TV 3 (9B179b1)
    Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

  • Crystal export to pdf  windows app: logon fails  -- works at other sites

    There must be hundreds of these errors each seems different. 
    I have a program installed on 4 different networks running vb.2008 windows app with the bundled CR.     It works on Vista 64 and windows xp machines.  Uses sql express 2008   The following works on all of them but one  (all installed with same setup disk):  crystal viewer opens with a report. A button is pressed and the report is automatically exported to a folder.  However in this one case all machines at one site fail (vista & xp)  As I mentioned, this  export functionality works on 3 other sites including development site and the reports all come up on all sites.  It is just the export to pdf on all machines on one site. Plus all reports work fine at all sites.  It is just the export to pdf at the one site.   Hee is the error.
    Crystaldecisions.crystalreports.engine.logonexception: logon failed.
    details: mscorlib: could not find file 'c:\windows\temp\inv.xsd'
    error in file c:\document.......
    unable to connect: incorrect log on parameters---> system.runtiem.interopservices.comexception(0x8004100DF) Logon failed.
    Unable to connect: incorrect log on parameters.
    at crystaldecisions.reportappserver.controllers.reportsourceclass.export(exportoptions pexportoptions,requestcontext prequest context)
    at crystaldecisions.reportsource.EromReportSourceBase.exporttostream(exportrequestcontext reqcontext)
    -end of inner exception stack trace
    at crystaldecisions.reportappserver.convertdotnettoerom.throwdotnetexception(exception e)
    at crystaldecisions.reportsource.eromreportsourcebase.exporttostream(exportrequestcontext reqcontext)
    at crystaldecisions.reportsource.eromreportsourcebase.export(exportrequestcontext reqcontext)
    at crystal.crystalreports.engine.formatengine.export()
    at crystaldecisions.crystalreports.engine.reportdocument.export()
    at fioes.frmcrmenulaserreport.exportcompletion()
    The same person set up all 4 networks for whats thats worth.

    reports work fine on all the machines and never had an error. In fact, report is up in  CR viewer when user presses button to export. Error is  on the crrpt.export command
    by the way, actually what happens when the cr.export is executed?  Maybe that may help me.
    Edited by: suzanne haig on Jun 18, 2009 9:27 PM
    One issue that I noticed  is that when there are report parameters defined they need to be in the same   block as the export object setup.  I in fact do have parameters that are given their value from  a dataset.  This is done in the form that shows the crystal viewer, but they are not  in the same procedure  as the export creation and the dataset for the parameters  is not declared on the form level.  However, the report object is declared on the form level as is the datset with the report data, so any property added to it, should be visible throuout the form including where the export occurs.
    However, this would not explain why the same situation works in another location and not just on the developer machine.  I also notice that the error message says it cannot find the xsd file, but it is in the proper location (other wise the report would not be viewable or printable)
    How does the export work, does it create an entire new instance of the report?   perhaps knowing what goes on behind the scenes would help me figure out what to do.
    Edited by: suzanne haig on Jun 18, 2009 11:17 PM

  • Facebook won't load properly. Takes forever and then I get a script page with log-in and then that takes forever and gives me further script that won't let me access anything. Other sites load and work OK!

    Started after last auto update several days ago. A few other sites are slow to load while many are good but Facebook just won't present it's usual mix of pre-programmed scripts and links but comes up eventually as part HTML script with a log-in box and when you log-in it then takes forever again and just gives HTML type script for "Friends" "messages" etc. but if you click these it goes nowhere!
    Also it won't let me clear history at all despite many tries. I removed and reloaded the program last night but no positive effect.

    I still haven't resolved this problem. Here is some more information...
    youtube is the only website that has started working, but it sometimes stops working again.
    There are many other sites that don't work, cnn.com, washingtonpost.com (sometimes), and a lot of others.
    I have contacted our internet service provider and they said that they had nothing to do with the problem.
    Some websites will not work at all. Safari tells me that it can't find the server. Some that do this are ups.com, computerworld.com, and others.
    I think that the problem is that, for some reason, our mac computers can't access certain servers where we are. (We are at a small ski resort (on the mountain) in Canada.) I think this because when a site doesn't load properly there are several errors and they are all "can't find host" errors from a couple of the same sites (ex. example.something.something).
    *Also, I ran a test on speedtest.net on the laptop and one of our iMacs and the results were way faster than anything actually loads/downloads or than the activity monitor shows, even when checking the activity monitor at the same time as running the test.

  • Module_data where clause using globals.site.dateNow

    I'm trying (and failing) to get a list of blog posts that are excluding the not yet released posts, here is what I have:
    {module_data resource="blogposts" version="v3" fields="id,siteId,blogId,postTitle,createBy,releaseDate,createDate,lastUpdateDate,enabled ,deleted,disableComments,slug,postUrl,metaBlogPostTitle,metaBlogPostDescription" skip="0" limit="10" where="\{'blog.releaseDate':\{'$lt':'{{globals.site.dateNow}}'\}\}" order="-id" collection="myData"}
    The "query" works but it ignores the globals.site.dateNow and displays everything (including posts greater than today).
    If I do a greater than (in testing), it doesn't display anything, it should have only displayed the unreleased blog posts.
    Bug? User error? Formatting incorrect? Any tips would be great.

    Hi Rich,
    In your 'where' filter above, you are using, 'blog.releaseDate', if you want to filter the data based on the blog posts' release date then use 'releaseDate' only. Like this -
    where="\{'releaseDate':\{'$lt':'{{globals.site.dateNow}}'\}\}"
    Let me know if you need more clarification on this.
    - Abhishek Maurya

Maybe you are looking for