Where's the iPhone4s in THAILAND had essembled?
As a result of ip4s in Thailand has released in 20,900 THB. I want to know where's the whole had been produced or imported from?
Furthermore, does the price is included VAT or not? Thank You.
I regularly export scaled down JPEG's for uploading to the web, and all my masters are 10 MP Nikon D80 RAW files with various adjustments. I batch apply exposure recovery, enhanced saturation, definition, and vibrancy, and sharpening to all photos, regardless of any other adjustments. I try to use shadows/highlights sparingly, since I know that can double the export time, but this isn't the root of the question.
Most of what you're asking for is right there. The values of each particular adjustment don't change the underlying issue, that something other than the CPU is the limiting factor. I timed an export of 20 images with the above settings (no shadows/highlights) and it averaged 2.7 seconds per image for a 1024x1024 max JPEG. Full size took 3.1 seconds, and the results for 8-bit TIFF's were the same as the equivalent pixel size as in JPEG. Add highlight/shadow and levels adjustments, and the times go up to 5.6 seconds for the 1024x1024 and 5.9 seconds for full size.
That doesn't sound like a lot of time, but most events I shoot end up having around 500 pictures to upload, which translates to 23-47 minutes of chugging, depending on the number of images that use highlight/shadows. While it's theoretically possible to keep working while exporting, Aperture just gets too unresponsive to make it worthwhile.
All that said, I don't really want speculation. I want to hear examples of hardware upgrades or other system changes that caused a corresponding improvement in Aperture performance. There's got to be some folks out there who added more RAM and then noticed "hey look, now all my cores are maxed out". Or perhaps someone did that and it had no effect, but changing video cards affected it. Or maybe there's something else I haven't thought of, but I can't imagine I'm the only one who's wondered "if Aperture can use all 2/4/8 cores, why can't it max them out too?"
Similar Messages
-
Where is the shopping button I had on the last version
I have just downloaded the new version....where is the shopping button I had on the previous version ?
How can I go back to the previous version ??Firefox has never had a shopping button, that was likely added by an extension. As the button has gone the extension may not be compatible with Firefox 4 and have been disabled.
-
guys, I need help, im trying to the the new software IOS 7.0 and it requires 3.7 GB free space. im using the IPhone4 and it has 6.4 GB capacity. i've deleted so much and it still says I only have 1.4 GB, I dont understand where the 5GB are being used.
has any one experienced that? I cancelled my icloud account coz i tot the 5GB where there. im so confused. please help.
DeeFirst thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
I used the Migration utilitie from Lion and eventhough I know the folders are there (with a quick search I find images etc) the proper order is not displayed.
Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518 -
As stated. I have the iPhone4, I've had it personally for a year now. It's a hand-me-down phone from my uncle who had for for at least two years. For an old phone it worked perfectly. The ocassional hang up on the caller when I try to lock it, but overall it worked perfectly.
Now, it started to glitch out a lot. From not letting me unlock my phone for the few minutes, to now shutting off on on regardless of where it's at. I started noticing that my phone would shut itself off, even at 40% when I'm at work. To fix it I would have to find a charger, plug it in for a few moments and it would turn back on. I would be cautious not to put it upsidedown otherwise it'd shut off again.
As of last night, ((9/18/13 )) My phone turned off. I've already gone through the charade numerous times. So I put it on my charger but this time when my phone turned on I didn' have service and it didnt get wifi. Even the red buttons/notifications on my phone were there but didn't read any numbers. Obvioulsy I couldn't make calls or even send a text messages. Sometimes when it turns on I can't even use my apps. Even when fully charged, the moment the chargers is slightly out my phone shuts off as if it died
Now, my phone even on the charger shuts on and off. I'm unable to use apps. I get no service or wifi.
Is this fixable? Or has my phone had it's last Hoorah?it sure sounds like the battery is defect
-
Where has the iCloud icon gone in the menu bar
When iCloud where in the trial stage they had a little cloud icon top right side in the menu bar to drag and drop files to. I recentlywanted to upload docs to iCloud and noticed it had gone. I never log into iCloud from the Internet, after reading the threads, it seems this is the only way to save files to the cloud now, am I wrong?
Are you sure you aren't confusing iCloud with iWork.com? In any event, there's no menu icon. To upload iWork documents, go to http://icloud.com and go to the iWork page, pick the appropriate of the three programs, and drag the file in the Finder to the web page.
More details here:
http://help.apple.com/icloud/#mm9d2051b9 -
Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?
You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.
Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg -
My hard-drive crashed, I own Lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium
Hello Andrea,
did you try this: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=DT EML
What concerns your eMail you should talk to Adobe, please have a look there: http://helpx.adobe.com/de/contact.html by clicking throug their questions and if "open" please use chat, I had the best experiences.
Hans-Günter -
since I did the update to OS5 I can't update any apps on my iphone4 and also had to make a new account before it would do the update. now it won't let me sign in to my original itunes and tells me the password is wrong and I know it isn't.
I having same problem is there a solution ?
-
in the first itunes i had the option show dubbel parts but whit the newer one i cant find that option annymore, where is it?
palkia wrote:
in last 4 days, i been using the new ip4 to take important photos and creating new contact.my new ip4 never snyc to itunes
There's your problem right there... ^
Whatever you did prior to plugging it in and answering yes to start the restore is gone forever. -
i bought my iphone from faisalabad pakistan i dont know where is the original buyers of it now due to sm reason i had to make its software new and now its wanting id and password and i dnt knw that m v worried about it i paid 30000 rs to buy it ???
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it. -
where are the patches that are being discussed all over in the media??? i have an iphone and ipad and have had no APPLE updates for a long time.
Thank you... one would think that if Apple needed to push out something so important they would make it more obvious!!!
-
I updated my iMac to Mountain Lion and when I want to fit my screen view... in the last version I had to examples where I could choose wide after format but I miss that function now in Mountain Lion. Can anyone please help me???
I'm sorry for my bad english, my problem is that I want the program I open in a new window to be avilable in full screen mode. Before I uppdated my os to Montaine Lion I could choose wide under screen in settings. I'll take an ex for you. When I play poker online I want to see the tabel in full screen but I don't manage to fix that. Do you Sir have any idea???
-
Where are the email options like SendNow had?
My inbox is getting pick up notices from recipients who've accessed the links that I've sent them. I don't want or need these pick up notices filling by inbox. Where are the email options like SendNow had?
More importantly, why did Adobe get rid of a wonderful product... I'd pay more to get the old service back!!
Thx, JGHi jgriffenJTC,
You can disable notifications on a per-file basis. Please see View a file's tracking information in the Adobe Send Getting Started document.
Maybe you are looking for
-
Authorization Matrix for BI Sandbox
Hello, I would be thankful if anyone can help me by telling the minimum authorization required in a BI Sandbox for doing practice cofiguration of Infocube DSO and creating data source using FLAT FILE. Thanks and Regards Ranendra
-
Mail and safari won't work after installing lion.
After upgrading my computer to Snow Leopard then to Lion I am unable to open Safari and Mail. The computer says the versions I have are not compatible with Lion. I have checked to see if there are any available updates by selecting the apple at the
-
Why does font looks pixelated when exporting motion template to FCP?
I created a motion template for some text animations and I also tried with just a motion file and when I added either one to FCP it just looks like crap (pixelated edges, really really bad edges) I noticed this happens if you don't have a drop shadow
-
ROI of implementing SAP Netweaver Mobile 7.1
How can we calculate ROI of NW mobile 7.1 implementation? In what areas can SAP Netweaver Mobile 7.1 ensure savings/ reduced expenditure? Some example areas are: 1. Paper work 2. Operational Cost (Eliminated Data Updation time)
-
How to get a window icon in Matisse
In Matisse (NetBeans 5.5) I have a GUI based on JFrame. I want to replace the java icon in the top-left corner of my application with one of my own. But the window frame does not seem to be available. How do I change the window icon?