Where's The Last Of US?

I bought The Last Of Us for the PS3 when first released. Since my original purchase I've deleted it and downloaded it again a few times. I wanted to play it again so popped on to the store to download once more and now PSN wants to charge me £24.99 for the priviledge as it's now listed as the Game Of The Year Edition. I've looked through my download historyand can see TLOU round about June 2013 but there's no link to download again.I phoned PSN for supoprt and the girl I spoke to (who had never heard of TLOU!) rasied an incident no. but said I had to contact Naughty Dog to get them to Trouble Shoot first as she had no record of me buying TLOU although she could see it in my download list too. *****? I've emailed Naughty Dog 2 days ago but no reply. I'm of the opinion that this is PSN fault and nothing to do with Naughty Dog. Who should I complain to?

Yep. Looking at it right now. 16/06/2013 £47.98. £39.99 for the new game and £7.99 for the network pass. I can see it in my download list too for the same date (just no button to download).

Similar Messages

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

Your welcome.
If you don't see it on the map now when you go to icloud.com and check Find My iPhone, if it is shown on the device list you can click on the device, then check the box next to "Notify me when found" (see image below) and you will receive an email when it goes back online, if ever. The email is sent to the email address associated with your iCloud ID.
There's nothing else you can do. I don't believe iCloud support can tell you it's last location either once it's cleared from the map.

Where is the 'last' command in systemd?

So, the question is simple: where is the last command with systemd?
As I see sysvinit provides but can't install because of conflicts with systemd-sysvcompat.

Terminator wrote:
thisoldman wrote:Both commands are included in 'core/sysvinit'.
The OP is clearly aware of that. He/she mentioned that sysvinit cannot be installed because of a conflict with systemd-sysvcompat .
I'm a man, so he

HT4061 I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.

I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.
Is there any way that I can find the last location that I left it,eventhough I called in lost and stolen and reactivated my # to a different device.

If you didn't set up Find My iPhone or it otherwise does not appear in icloud.com, then there's no way to trace it. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards.

Where is the "Last Modified Date"?

I'm in Report Builder trying to create an Incident report that includes the "Last Modified Date" value. However, I can't seem to find it in any of the views using the Report Builder wizard.
Can someone point me to the right source for that value?
Thanks,
Chuck
Chuck Roy, Pennsylvania Turnpike Commission

Chris,
For reports, I would want to use the same data that SCSM uses in Views and Templates. When creating a View for Incidents you can select based on the Last Modified Date. When you create an email Template for Incidents, you can select the Last
Modified date to be inserted into the template.
In order for our report to display the exact same Incidents as a View that selects based on Last Modified Date, the report needs to use the Microsoft definition of Last Modified Date.
Generally, I agree with your definition. However, an easier definition may be that Last Modified Date equals the most recent History log date on the History tab.
Either way, as I mentioned above, it needs to be the same as is used in Views and Templates, recognizing that there are timing differences between the data base and data warehouse.
Chuck
Chuck Roy, Pennsylvania Turnpike Commission

Where are the last posters listed under the other tabs?

Title says it all. Restore the last poster (and the originator) to the listings under content and discussions. It's important to know who's created or responded to a post.

And the location of the OP.....
I added this to another thread earlier today and one of the hosts acknowledged it with "good feedback", so we may get it back.

How to remove item header on the last page

Hi,
We have an adobe form where, on the last page a BIG footer gets displayed.
Now if the number of line items are not enough, they wont go till the last page, but the last would still be printed with no line items, just to accomodate the huge footer that we want to be displayed only on the last page.
Now in doing this, we want that if there are no line items on the last page, the item header should not be displayed. We are not sure how do we do this.
The same is accomplished in SAP Script, and there they are using WRITE_FORM with type DELETE. So anything that prints after that even on a new page, the item header wont get printed.
Please suggest how do we do this in Adobe Forms.
Thanks,
Tirth

Hi Mate,
there is a contradiction then.
in table header rows definition, we specify show header in subsequent pages, then the header appears only if there are items displayed on that page. in your case the table header shouldn't be displayed then please check why its comming out there...?
well in any case if you want the script it would be like below on layout ready event of the header row.
// run the below script in last page
if(xfa.layout.page(this) == xfa.layout.pageCount()){
var pageSFList = xfa.layout.pageContent(xfa.layout.page(this) - 1, "subform", false);
var pageTotal = 0;
// for each subform named <Item>, which is the data row of the table
for (var i = 0; i < pageSFList.length; i++)
     var sf = pageSFList.item(i);
        if(sf.name == "headerrow"){ // if header row is found then chec is data row is visible and set its presence accordingly
           if(sf.parent.item.presence == "hidden"){
               sf.presence = "hidden";
     if (sf.name == "Item") // if data row itself is found set its presence accordingly
       sf.parent.headerrow.presence = "visible";
you might need to tweak the code according to your element names.
hope this helps,
Cheers,
Sai

Suppress printing the last two pages

I have created a form that has the last two pages of the form screen only visible. Saved the form and printed it but the last two pages print blank. Is there any way to suppress printing the last two blank pages. If I was the only person using the form I just wouldn't print the last two pages but this is going into a production environment where seeing the last two pages is important but printing the last two pages isn't.
Thanks.

Take a look at the script produced by the "Print Button".
xfa.host.print(1, "0", (xfa.host.numPages -1).toString(), 0, 0, 0, 0, 0);
The doc for print is available at http://livedocs.adobe.com/livecycle/8.2/acrobat_designer/001735.html
Steve

Using WhatSize - where's the rest of the space?

Running WhatSize it tells me my hard drive has about 60Gb on it. However, my MacBook Pro tells me it has about 90Gb out of its 93Gb capacity. Where's the last 30Gb?

> Where's the last 30Gb?
Use Disk Inventory X to see a map of all files.

Want to single out the last character of a string

There is a field where there are many strings of varying length. E.g.: AB001XUV, AB003XUK, DJ8933FXUV etc.
From these strings I need to create a virtual column where only the last character is shown. So it shall be V, K, V for values from the above example.
Can anyone please suggest me how to achieve this.
Regards
Hawker

SQL> with t as (
2 select 'AB001XUV' col from dual
3 union
4 select 'AB003XUK' col from dual
5 union
6 select 'DJ8933FXUV' col from dual
7 )
8 select substr(col,-1,1) from t
9 /
S
V
K
V
SQL> create table temp(id number,
                  col varchar2(10),
                  VIRTUAL_COL VARCHAR2(1)   GENERATED ALWAYS AS (substr(col,-1,1)) VIRTUAL
SQL> insert into temp(id,col) values(1, 'AB001XUV') ;
SQL> select * from temp ;
        ID COL        V
         1 AB001XUV   V
SQL> Edited by: Azhar Husain on Aug 16, 2011 1:17 PM

HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
https://discussions.apple.com/message/19134562#19134562
Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

How to calculate the last selected item in a tree node where we can customize the list to the node.

Hi,
I'm new to the Flex field. I got a task where i have a tree (TREE is the id) with X and Y as nodes. In X i have got a list of pages(dataprovider is array collection) added dynamically(means User can configure the pages).On selecting last item(last page) in the list of X node, the view will be presented with a component say Xlast on the right side which is in view stack. In that component , there is button called NEXT which has to be greyed out for the last page. I tried by calling the below code on viewChange event
if(viewstack.selectedchild == XlastpageId)
Nextbtn.enabled = false;
but this will work only when we know XlastpageId is the lastpage for the tree. but how to implement this when we dont know which is the last page of the X node in a Tree.
I also tried by calculating the children of the tree on tree click event which is
if (Tree.selectedItem == TREE.numChildren - 1)
Nextbtn.enabled = false;
i know this is wrong because we have 2 children for the tree( X and Y) so it is showing 2-1 and the button is greyed out for the first click.
Please help me out.
Thanks in Advance,
Sw

Hi,
According to your post, my understanding is that you want to monitor the last login user’s details.
There is no out of the box way to achieve it in SharePoint.
We can use cookie to be a flag for checking whether there is an user just log in. After the page loaded, if the cookie is null, it suggests that there is an user just log in our site, then we
can get this user’s information using JavaScript Object Model and add the information into a custom list. With this list, we can monitor user’s login details.
Refer to the following link:
https://social.technet.microsoft.com/Forums/en-US/0cd4d531-cb61-4d90-aa70-413267f4a735/how-to-know-login-and-logout-details-of-a-user-in-sharepoint-online-2013?forum=sharepointdevelopment
Besides, here are two similar posts for your reference:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/1a35283e-0f2a-49b8-b330-801a3cfcd890/programatically-get-all-current-logged-in-users-list-for-a-sharepoint-site?forum=sharepointdevelopmentprevious
https://social.technet.microsoft.com/Forums/en-US/10953be3-cb1c-40c7-9454-545c8338b551/how-to-know-login-users-count-and-their-details-in-sharepoint-2010-web-application?forum=sharepointgeneralprevious
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

I saturated all the available iPad (3rd. generation) screen space (home screens or desktop space) with apps, and the apps that got bumped out of the last screen, mysteriously disappeared? Where are those missing quick lauch app icons?

Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?

Christopher Doryan wrote:
Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
Wow, kind of a snotty response to someone who was taking their own time to offer help. Whether you thought it was helpful or not, didn't deserve such an unkind retort. Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
Just sayin.......
Oh and Meg offered the right answer. Put your Apps in Folders, which will create extra space for the apps which have disappeared.

I have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help be4 i throw the computer out the window!

i have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help before i throw the computer out the window!

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Where's The Last Of US?

Similar Messages

Maybe you are looking for