Where's the like to go bck to v4 from v5? Several Addons aren't compatable with v5.

Today,, 6/21/11, I upgraded to version 5 from version 4. Serveral addons (FireGestures & TweakTube) aren't compatable and there are no udates for the addons. I want to go back to version 4 but can't find a download link. Where can I get the required v4 file/link?

I regularly export scaled down JPEG's for uploading to the web, and all my masters are 10 MP Nikon D80 RAW files with various adjustments. I batch apply exposure recovery, enhanced saturation, definition, and vibrancy, and sharpening to all photos, regardless of any other adjustments. I try to use shadows/highlights sparingly, since I know that can double the export time, but this isn't the root of the question.
Most of what you're asking for is right there. The values of each particular adjustment don't change the underlying issue, that something other than the CPU is the limiting factor. I timed an export of 20 images with the above settings (no shadows/highlights) and it averaged 2.7 seconds per image for a 1024x1024 max JPEG. Full size took 3.1 seconds, and the results for 8-bit TIFF's were the same as the equivalent pixel size as in JPEG. Add highlight/shadow and levels adjustments, and the times go up to 5.6 seconds for the 1024x1024 and 5.9 seconds for full size.
That doesn't sound like a lot of time, but most events I shoot end up having around 500 pictures to upload, which translates to 23-47 minutes of chugging, depending on the number of images that use highlight/shadows. While it's theoretically possible to keep working while exporting, Aperture just gets too unresponsive to make it worthwhile.
All that said, I don't really want speculation. I want to hear examples of hardware upgrades or other system changes that caused a corresponding improvement in Aperture performance. There's got to be some folks out there who added more RAM and then noticed "hey look, now all my cores are maxed out". Or perhaps someone did that and it had no effect, but changing video cards affected it. Or maybe there's something else I haven't thought of, but I can't imagine I'm the only one who's wondered "if Aperture can use all 2/4/8 cores, why can't it max them out too?"

Similar Messages

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
        Mockery context = new Mockery();
        final MessageListener messageListener = context.mock(MessageListener.class);
        final Latch latch = new LatchImpl();
        final String prefix = "test" + System.currentTimeMillis();
        context.checking(new Expectations() {
                oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                will(new CustomAction("release latch") {
                    @Override
                    public Object invoke(Invocation invocation) throws Throwable {
                        latch.unlatch();
                        return null;
        final Connection connection = createConnection(null, null);
        Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection.start();
        Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
        Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
        final MessageConsumer consumer = session.createConsumer(wildcardTopic);
        consumer.setMessageListener(messageListener);
        MessageProducer producer = session.createProducer(null);
        producer.send(destination, session.createTextMessage("MSG1"));
        latch.await(5000);
        connection.close();
        Thread.sleep(5);
        context.assertIsSatisfied();

Check where your MDB sends the [response] messages to.

How do I figure where is the data in a materialized view coming from

Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
TIA
Ravi

SQL> select * from dict where table_name like 'ALL%MVIEW%'
TABLE_NAME                     COMMENTS
ALL_BASE_TABLE_MVIEWS          All materialized views with log(s) in the database that the user can s
                               ee
ALL_MVIEWS                     All materialized views in the database
ALL_MVIEW_AGGREGATES           Description of the materialized view aggregates accessible to the user
ALL_MVIEW_ANALYSIS             Description of the materialized views accessible to the user
ALL_MVIEW_COMMENTS             Comments on materialized views accessible to the user
ALL_MVIEW_DETAIL_PARTITION     Freshness information of all PCT materialized views in the database
ALL_MVIEW_DETAIL_RELATIONS     Description of the materialized view detail tables accessible to the u
                               ser
ALL_MVIEW_DETAIL_SUBPARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_JOINS                Description of a join between two columns in the
                               WHERE clause of a materialized view accessible to the user
ALL_MVIEW_KEYS                 Description of the columns that appear in the GROUP BY
                               list of a materialized view accessible to the user
ALL_MVIEW_LOGS                 All materialized view logs in the database that the user can see
ALL_MVIEW_REFRESH_TIMES        Materialized views and their last refresh times for each master table
                                that the user can look at
ALL_REGISTERED_MVIEWS          Remote materialized views of local tables that the user can see
13 rows selected.

Where does the second page of PREVIEW CONTRACT come from?

I am using 11.5.10.2, and I would like to know where the second page of PDF output comes from when I select PREVIEW CONTRACT from the VIEW CONRACT TERMS window. It does not appear to be part of the layout template named "PO Terms and Conditions". It does not appear to come from the XML SCHEMA file defined for the "Contract Terms Data Definition".
This page appears to be very much like a purchase order. I have tailored the XML template for printing purchase orders, and I need to be able to tailor the look of this doument as well.
Thanks

Well, I eventually figured this one out!!! There is a template (or more correctly an XSL stylesheet) that is delivered with Oracle. You can find it by using XML Publisher Administrator -> Templates, and looking for "Standard Purchase Order Stylesheet". This template is locked, meaning we can't update or replace it. It is also the format which you see (or saw) when you choose "Preview Contract". You can select 'preview' from the XML ADMIN template screen and you'll see what it looks like.
I also learned that there is a matching between "document type" and "Document Template" and also between "document type" and "Contract Template". And that the document type of 'PO' with document subtype of 'STANDARD' was associated with the "Standard Purchase Order Stylesheet".
I also found that
NM PO ADMINISTRATOR -> SETUP -> PURCHASING -> DOCUMENT TYPE
allows you to select a document type (like PURCHASE ORDER ... STANDARD). This displays a screen which has fields called "Document Type Layout" and
"Contract Terms Layout". This is where you can specify your own template (instead of the default one).

Where is the button called "tools" that Firefox keeps refering to when I ask for help with something?

In order follow their directions for some help, I am told to use a button called "tools". Where is the darn thing?

OH! There it is!! I knew it was a simple quest. Just can't get my head around everything this century requires in order to function effectively. whew. Thanks again, woof,
Susan

Where Should the JavaScript Go if I'm Calling from the Page HTML Header?

In the Application Express User's Guide under "Calling the JavaScript File from the HTML Header Attribute" point 4 says:In HTML Header, call the JavaScript file using the following syntax:
<script src="/my_images/custom.js" type="text/javascript"></script>However, it doesn't say where my_images is located.
Where should the .js file be stored?
Thanks,
Gregory

naviagte to shared component in the application edit screen and upload your .js file to static files.
now you can ref. this file as
In HTML Header, call the JavaScript file using the following syntax:
<script src="#WORKSPACE_IMAGES#custom.js" type="text/javascript"></script>
{?code}

Where do the UCS blades get their system time from?

Hello,
I'm curious how the system clock gets set on UCS blades?
I have NTP setup in UCSM and expected the blades to set their time based on that during first boot at the very least.
I recently associated a new service profile to a blade and installed ESXi5. The VMware 60 grace license period showed the correct expiry date (04/07/2012) but as soon as I would connect with the vSphere client it would say grace period ended. After digging a bit the blade had a date set for someday in 2010? Anyone know why this would be the case and how I can set the blade system clock?
-Brian

Found a bug to track this issue CSCtj19497. There's no commit date yet, but I'm going to get some pressure put on this one.
I encourage you to open a quick TAC case and simply request to have this bug attached to your SR. This will give more ammunition to get this resolved faster.
Regards,
Robert

Where has the black background box behind attachments come from?

Suddenly I have a black box behind any attachments. It is like a text box. It has not been there before!
If I choose to print to a pdf attachment in an eMail the attachment id superimposed on a black text box with an 'X' in the corner, click the 'x' the lot disappears. But if you turn the attachment into an icon and highlight it then erase it, left behind is a black text box into which any new typed message appears.
How do I get rid of this, any suggestions well received.
Thanks,
David

I get this when sending invoices from Market Circle's Billings.
One workaround I have found that works is once the file and a new message is open in mail, create a new message then drag and drop the attachment over then create your message in the new mail.
I agree though - need a permanent fix soon.

Where is the option to deselect a debit card from the payment options menu?

Okay, so i had made a purchase wiht my Visa Debit Gift Card about a month ago. I knew my balance was low on my card (about $0.91). With that in mind and knowing the exact balance i had gone a made a purchase. Now, however, the itunes on my comupter said i had $0.51 left in my account. My ippod itunes store app said i had $0.88 left in my account. I had made the purchase on my ipod note. In seeing that amount (the $0.88) i mad my purchase. everything went thru with no errors, until later in the month. I go to update a few of my apps from the itunes computer version. when i tried to update, it said i had to confirm my payment method. So, thinking i would just choose "none" i clicked okay. Come to find out, my debit card is still attached to my account and i cannot undo this and im also in debt $1.29. Apple, you suck first off. And second, i've been reading that adding an itunes gift card will not undo this debt...furthermore i must continue to say Apple, you suck. Why can i not undo this?

Just found an alternative that I thought was possible but wanted to confirm.
Set yourself up a Nokia account on www.ovi.com and set up an OVI Sync account. Sync the phone to the online account to start with.
Then, using the online interface to OVI Sync you can create an event that can be repeated weekly among other things. Re-sync the phone and that repeating event will be entered into your calendar.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Where is the account: for conect to engine oltp from ssis

hi
For conect to sqlserver I use account and password windows:
but its not work: its said: user o passord invalid, i want to know what should be this user and password
my setup...

If you want to use Windows Authentication choose probably the option before last one Seguridad integrade de Windows
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Where has the back arrow gone? No help from suggested change to tab preferences

I also have lost the back arrow in Safari 6.0 running under Mountain Lion. Change of tab in preferences does not seem to help.

James, as always, go up to "View" then click on "Customize Toolbar, and drag the forward&back arrows on to the top of your toolbar.

Where does the Ipod Maps App get its location from?

Mine thinks it is in Queensland but it is in Victoria

Location on the iPOd is determined by the location of a nearby wifi router that is in Apple's database of routers and their location. The iPod does not have to be connected to the router, just within rage. As of yet, nobody seems to know how to add to or correct Apple's database.

Where is the double powerconnection on Mp+8800gt come from

http://picasaweb.google.com/feelitmon/UnboxingTheFruit/photo#5164349678821673442
anybody knows if thats going to be a problem
placing the 8800gt on my 3.0 early 2008 mp????

I can confirm that our 2007 and 2008 Mac Pros have two 6 pin power connectors on the motherboard near the PCIe bay inlet fan.
We're still waiting for our GeForce 8800 GT kit to arrive. I know the Quadro FX 5600 needs two power feeds but does the GeForce 8800 GT require two feeds? I understood it only needed one and that you can put two GeForce 8800 GTs in the 2008 Mac Pro (as long as there are no other PCIe cards present) without exceeding the 300 watt PCIe bus limit. I was planning to do that and use one power cord for each.
BTW, we had a PC version of the GeForce 8800 GTX "lying around" so we tried it. Of course, it won't work with OS X, but it booted up fine with our Boot Camp partition with Vista 64. It has two power receptacles. We happened to have two PCIe power cables designed for the Quadro FX 4500, GeForce 7800 GT, and Radeon X1900 XT, so that wasn't a problem. We get "killer" frame rates with Prey and other PC 3D games!

Waiting for Activation i have an iphone 3g. iphone is from my old contract and i have given it to my girlfriend. she then went to the O2 store and they gave her a new sim card which is compatable with iphone 3g. O2 have told me the phone is not blocked.

" fault code,,,,,waiting for activation, this may take some time,,,,," O2 gave my gf the contract and the new sim card to go into my old iphone 3g which was with O2 previous, O2 have assured us that the phone's imei number is not blocked, they have also said the sim is activated and there is no reason why the phone should not work. the phone is out of date warranty. the sim card does work in other handsets, also my sim from my iphone 3gs does not work in the iphone 3g. i have spent hours litterally on the phone to O2 and now to apple, but because i am out of warranty apple want £25 just to even listen to me over the phone. someone please help me. i am getting very frustrated for hopefully what might be an easy fix for someone. i have done all the resets that are possibly humainly possible, i have done all the resores you can do, have sync'd on many occasions all to come up with the same fault. i am still getting O2 in the top left corner but with no bars and when trying to call it fails imediately. wifi is fine, it works as an ipod.

ONLY AT&T can legally/legitimately unlock it. No one else at all.

When i text with my new 4s the person receiving my text receives it from my email address, when i text with my new 4s the person receiving my text receives it from my email address

when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?

when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?

Where's the like to go bck to v4 from v5? Several Addons aren't compatable with v5.

Similar Messages

Maybe you are looking for