Where's the Logout link gone?

All my application pages used to have a Logout link on the top right hand side. Somehow I've managed to delete this.
Any ideas how to get it back?

Hello,
Go to Shared Components, Navigation Bar Entries. If 'Logout' is not there anymore, someone deleted it.
Create a new Entry:
Logout, Target= URL, URL Target = &LOGOUT_URL. (with the . at the end) and you're done.
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

Similar Messages

  • Where has the download link gone on My Products page?

    My old computer is starting to have issues so now I have a new laptop running Windows 8.1.  When I went to My Products, the software is all there but the links to download them are missing.  Do i have to uninstall thesoftware from the old computer first?

    No, downloading is not depenedent on installation/activation.  If you downloaded them originally then there might be links in your account to download them again.  If not, you can probably download the application(s) from the site linked below, though you have to carefully follow the instructions for the links to work properly.  It also depends on which applications you are looking for.
    http://prodesigntools.com/tag/ddl

  • Where is the activity function gone? in version 6 Safari

    Where is the activity function gone? in version 6 Safari. I may have updated from a previous version around the beginning of August 2012.
    I came to use this function only to find it missing??

    Safari 6
    Apple removed Activity Window in Safari 6.
    Best.

  • Acrobat 8 - Where is the new link?

    I have to reinstall Acrobat 8 that was preinstalled on my laptop. It was reformatted due to malware and I have to reinstall everything. I have the disk and hte serial number but my laptop does not have a CD drive.  The link that was previous listed did not work.  Where is the new link?

    ProDesignTools has Acrobat 8 Pro for download here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Note: Very Important Instructions
    You need to have a free Adobe account and be logged into it to use the links below, as Adobe sets a session cookie on your browser that allows you to access the direct download links.  Otherwise, you will receive an “access denied” or “resume your download” message preventing the connection.  So please follow these instructions carefully or the links will not work!
    Adobe recommends temporarily turning off any surfing restrictions you might have running, like site or cookie blocking, filtering, firewalls or antivirus software.
    Click «HERE» to visit this page and then select the “Download Now” button at the bottom.
    If asked, then sign in with your Adobe ID or take a minute to create one for yourself.
    Now close or cancel any windows that may pop up or any downloads that started.
    OK! Now you’re logged in at Adobe with the trials cookie set, so you can instantly download any of the software below.  Just make sure you have enough disk space.
    Download the files either by clicking directly on the DDL links, or by right-clicking and choosing “Save Link As…” on the popup menu – and save all files to the same place.
    Then follow the product installation instructions here.

  • Where has the "recordings" options gone in imovie for the iphone? It used to be listed under the audio tab in the import icon.

    Where has the "recordings" options gone in imovie for the iphone? It used to be listed under the audio tab in the import icon. At one point you could add audio to a project from the Voice Memo app.

    there is NO "reload" button under "customize"!
    how do I get my toolbars set back to pre-firefox4?

  • ITunes 11.0.1 Where has the radio option gone from my source list on the left side of iTunes ? How can I restore it?

    Where has the radio option gone from the source list on the left hand side of my itunes? How can I restore it

    If you have it turned on it is now under the music section on the top where you have Songs, Albums etc. It is on the far right next to Match.
    If you cannot see it then Preferences and Tick Radio Option
    If it is still npt there the Preferences, Parental and untick Disable Radio

  • HT5315 Where is the download link?

    Where is the download link for Server Admin Tool 10.7.5?
    It is NOT in Downloads (maybe yet)...

    Well hidden. You have to type in just the right phrase to get it to show up in a search of the downloads. I actually finally found it via Google.
    http://support.apple.com/kb/DL1596

  • Where is the download link for photoshop extended cs5 for mac?

    where is the download link for photoshop extended cs5 for mac?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Where is the download link for adobe 9 standard

    where is the download link for adobe 9 standard?@

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Where has the preview panel gone is Bridge CS5?

    Today when I opened up Bridge, the preview panel on the right hand side has disappeared. It shows as being selected when I go to the Window Menu but it isn't there. The scroll bar is also missing so I can't view all of the thumbnails. Does anyone have any ideas about why this has happened and how I can return it to it's normal format? Thanks, Michelle.

    Fantastic. Thank you, much appreciated
    Date: Mon, 16 May 2011 02:22:18 -0600
    From: [email protected]
    To: [email protected]
    Subject: Where has the preview panel gone is Bridge CS5?
    No, but you can choose Reset Workspace from the workspace menu to get it back to normal.
    >

  • Hi where is the database link previously under windows menu?

    Hi where is the database link previously under windows menu

    Removed feature: Server Behavior, Bindings and Components Panels and Database feature
    There is a single extension to restore these features. Extension is available at:* Vista/Windows 7: C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Configuration\DisabledFeatures* Mac OS X: /Applications/Adobe Dreamweaver CC/Configuration/DisabledFeatures
    As seen on http://blogs.adobe.com/dreamweaver/2013/06/a-look-at-the-modernized-dreamweaver-cc.html
    Video instructions on how to install these back available here: http://www.youtube.com/watch?v=cB2vmNfcq7A

  • Where is the download link for SCEP Client Offline installer for x86 & x64 altest greatest version (4.6.305 as of today)

    Where is the download link for SCEP Client Offline installer for x86 & x64 latest greatest version (4.6.305 as of today)?
    The answer IS NOT IT AND NEVER WILL BE "DOES NOT EXIST"!!!!!! MUST NEVER NEED TO RUN UPDATES TO GET IT!!!!!!!!! THE ONLY ACCEPTABLE ANSWER IS THE LINK!!!!! DUH GET YOUR ACT IN GEAR MS!!!!!!!!!!
    Ralph

    Thanks to all for the information. I work in higher ed. We have SCCM latest version, fully licensed. Unfortunately the individual who manages the SC does not have a clue as to where to find the SCEP installer. I sent him links from MS that shows him where
    it is supposed to be. The version he say's is on our SC Management server is 4.3. I, in the past, was able to get 4.5 independent of him and it has been working well for me but it is time to use the latest greatest version instead. I should just as easily
    be able to get 4.6. As far as licensing goes, if the product was correctly designed it should just work itself out just like it does for the 4.5 version I was able to easily find and download.
    As for the link given by KevinMJohnston, thanks by the way, its the closest I have come to getting what I need but all I get is a spinning wheel in Firefox, the only browser one should ever need. In IE I get prompted for an email address, which it should
    NEVER EVER DO!!!!!!!!!! I did give them my address, but alas, after waiting over 30 mins. I still don't have a link to the update or the CU4 Config MGR update mentioned. (Another reason I am not very nice to MS, along with, see below...) Please send me the
    link that they are suppose to send me in the email.
    As for the intensity of the request it comes from not being able to find the update on my own. (Amongst a million other complaints as MS makes my job harder and harder, just think of all the lost productivity and extra repair efforts needed because MS stopped
    allowing you to do upgrade/repair installs from the install discs. You have to have a working OS to do it, or you will lose your settings etc and will have to re-install all of your software etc. How STUPID IS THAT! Can't use it to fix a blown driver or BSOD
    problem like you could in XP.  There is no excuse for that, I know better. So you can see why I have nothing good to say about MS etc etc.) There is no excuse for that! If the MS updater has it available then IT MUST BE MADE AVAILABLE FOR STANDALONE DOWNLOAD
    PERIOD. That goes for ALL updates PERIOD.  I use these updates and many others etc so that once I seal an image for a PC it has the latest greatest version of everything. It is quicker to get it stand alone in advance and installing than waiting for MS
    updates to do so. Also I prefer to config my images so that the Av installs after first boot. These are cloned PCs. Many of these PC are used in labs and are frozen. Here, the settings for the SCEP AV being pushed from above can cause major problems for the
    users i.e. the scheduled scan feature. If it is on when students are taking tests and they take more than 5 or 10 mins on question MS is stupid enough to start scanning causing the system to become unresponsive. This has caused students to breakdown in tears
    thinking the system is hosed and they just lost their tests. I have to do some creative reg hack, setting owner as "Guest", a disabled account, etc. to keep these settings from being changed. (Our SC managers push policies that work for the faculty
    but break the lab systems which are frozen, so I have to out hack them, should not be, but it is, we are trying to get that fixed, but bureaucracy and people afraid to share power etc makes it hard.)  These settings unfortunately will prevent the AV from
    installing so I need to be able to manually do it after I have set the reg to allow it.  And I could go on. Who knows when or why someone may need to do a manual update of something. I just had 3 systems fail 12 updates, yet when I manually downloaded
    them and installed them they ALL installed without failure. I did NOTHING in between the auto update and the manual, yet it was the manual way that worked. Maybe if MS could fix those kind of issues then no one would need to get stand alone update files.)
    That is not for MS to worry about. It is, however, their responsibility to make it so that I can choose what will work best for my environment, which only I could know. DUH. I have had issues in the past with MS AV and other brands being installed before "sealing"
    the images. etc. etc. etc.
    As you can see, there is not enough space on the world wide web to list all thousands of legitimate reasons to give Microsoft a hard time so I will do so on a case by case bases knowing I am probably spitting in to the wind, but hey somebody has to have
    the guts to do it. MS MUST NEVER BE ALLOWED TO SIMPLY GET AWAY WITH IT! They Must be called to the proverbial carpet.
    Maybe if people who are MVPs would not be afraid to join the choruses they would be embarrassed, (though it should be done out of moral obligation not embarrassment), enough to fix these obviously fixable problems etc. etc. etc. I have over 30 years in the
    IT business, the IBM XT did not exist until my senior year in college. You are not going to be able to convince me that there is a legitimate reason, copy protection IS NOT IT, to prevent me from fixing blown OS via re-install using install disc when OS will
    not boot. Nor are you going to be able to find legitimate reason for the SCEP 4.6.305 update to be so hard to get.
    Thanks again for the help, still waiting for email from MS, NOT COOL MS! NO EXCUSE!!!!!
    Ralph

  • Where has the visualizer button gone?

    where has the visualizer button gone in the bottom right corner?
    bit of a pain as i used it quite often

    iTunes 7 is pretty smart overall, nevertheless I have a few serious gripes with the interface. Firstly the little 'snowflake' icon on the bottom right that switches on the visuals has been replaced by the browse and burn icons. Was there a problem with the previous layout? My wife and I use that button everytime we turn on the visuals on our Mac Mini sound system in the living room. It was super convenient because you could move in a single mouse sweep from selecting a playlist to switching on visuals. With iTunes 7 you have to either select from the pop-down menu or switch to the keyboard and press cmd+T. It might not seem such a big deal to some but it's definitely a backwards step, no matter how small.
    The album art selector/display is very cool and niftily programmed however I'll never use it. The reason? Because if you fill it with album artwork, all those images are displayed over the visualiser at the start of each tune, which I HATE. I don't want sleeve designs ruining the beauty of G-Force which I paid good money to see. It's bad enough having the track info show when I already know what's playing! iTunes 7 is simply not configurable enough if you ask me, and hey, you shouldn't have to start configuring Fkeys to make up for the fundemental lack of choice in the program preferences.
    I have a pal who loves the gapless playback in the new iTunes 7 because it's great for mix cds. Well maybe that's the best playback feature of iTunes 7 but I'm afraid it doesn't make up for the loss of the visualiser button, so there!
    G4 Twin 1.25 Mirror Door   Mac OS X (10.4.7)  

  • Where is the quick links section of the app store?

    where is the quick links section of the app store?

    I can't find it either, to download Lion to my old MacBook. I guess I'll have to go down to the Apple store. What a pain!

  • I want to trial captivate, but i cant download it as im in the uk?? where is the uk link?

    I want to trial captivate, but i cant download it as im in the uk??
    I have tried to change my region but makes no difference?
    where is the uk link?  I assume there is one?

    see if this works:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for