Where's the sensor?

Has anyone here seen where the kt3 ultra2 gets its data for system temp?

riskybzniz1 wrote:
built into the motherboard?
4sns/1/40000000:TB1T-128.000 faulty sensor on the logic board, the board has to be replaced.
take in for repair:
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

Similar Messages

Where is the sensor that locks the Iphone 4s when you tilt it up on a call

Where is the sensor that locks the Iphone 4s when you tilt it up on phone calls so your face does not touch it.

The proximity sensor is at the top front center above the earpiece. If you look at a White iPhone 4S or a picture of a White iPhone 4S, you can see the small dark band above the earpiece, the proximity sensor lies just beneath this port on both the black and white iPhone 4S.

Where is the sensor that turns off screen holding to ear on calls/brightnes

I bought a cheap molded rubber case that covers the back of iPhone and the upper and lower parts on the front. It affects the light sensor and the phone screen doesnt go dark when I hold to my face and it doesnt allow the brightness sensor to work properly. I want to get a different case that doesnt mess with the sensor, do you know where its at exactly?
TIA

Rubber case that covers the light sensors? Solution: Xacto knife and very careful cutting skills.
If you can't see these two sensors behind the glass above the earpiece, get a very bright flashlight and shine directly above the earpiece, trying different angles. You should see a very small dot just above the center of the earpiece, with an elongated sensor just to the right of that. It's behind the glass which appears to be smoked in that area.
Wonder if the various case manufacturers didn't have access to this tibdit of information prior to the launch of the iPhone. It certainly seems like an important detail to note when designing a case.
For the record, I am using only an Incase belt clip holster - and keep the phone "naked" for regular use. Easier to use in the dock that way, and a couple quick swipes on my jeans every so often keeps the glass clean enough.
As someone noted elsewhere in this forum, the light sensor checks the ambient light to set the proper brightness only after the the phone is unlocked each time. However, if you go to the Voicemail screen, it appears that the sensors become fully active at that point, and you don't need to be on a call to see the effect of covering those sensors or shining a bright flashlight at them. Give it a try.

Where is the light sensor of the iPhone 5 Black model?

Where is the light sensor of the iPhone 5 Black model?

In the same location as on the white model, just to the left of the front facing camera.

Where are the K7N2 Delta temps sensors located?

Where are the K7N2 Delta temps sensors located?
Okay I know one reads from the diode... altough the reading still seems to be low compared to other diode readers (like the 8K3A+ which gives you readins in the 50's).
Where is the other one located?

MSI Tech... how about it?

Where is the light sensor on the iPad mini with retina display?

Recently I purchased an iPad mini with retina display. I purchased a third party case and the brightness doesn't seem to change with the case on which leads me to believe that the case is covering a sensor. Please can someone tell me where the sensor is?

I haven't been able to find out with a Google search, so the best thing you can do is to take it out of the case and cover any holes you see in the body of the device to see which one it is.

Where is the motion sensor?

I know in all MacBooks, there is a sudden motion sensor, which stops the hard drive in case you drop it. I'm just wondering if it's in the hard drive or on the logic board or something because I'm thinking of upgrading my 160GB hard drive to a 320GB hard drive from macsales.com and I still want the sensor.

Logicboard. If it were in the hard drive, then it would be gone when you put in a new hard drive.

Where to find sensor values in Enterprise Manager

Hi,
I followed the instruction from (http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_sensors.htm) to add sensors to my BPEL process. Where do I navigate to find the sensor values in Enterprise Manager?
I also notice in SOA Composite screen (Farm_soa_domain > SOA > soa_infra (soa_server1) > default > My_Composite), when clicking on instance ID link nothing happen, a bug?
I'm running on:
Oracle Enterprise Manager 11g
Oracle SOA Suite 11g (11.1.1.3)
Thank you,
Scott.

Found the issue, Chrome browser is not fully compatible with Oracle Enterprise Manager, use Firefox instead.

The first time you use nike + do u have to wake up the sensor?

the first time you use nike + do u have to wake up the sensor?

There is no need to charge it before you first use it. You cannot run the battery too low as the system will shut the device off before that happens to protect the battery.
Generally speaking, your Lithium battery will have the longest useable life if you avoid deep cycles. Since you can plug and unplug it as you wish, the best thing to do is just charge it up (however much) whenever it is convenient to do so (whether it is 10% discharged, or 20% or 50% - basically don't pay any attention to the battery level, just plug it in when it is convenient to do so to keep the battery topped up). And try to avoid frequent deep cycles where you run it all the way or very near to the point it auto-shuts off.

Where does the magnet go for the reed switch? (i found the magnet after . .

My hinges had broken on the display so I replaced the display.
After putting back the unit together I found a magnet ?
The unit was going to sleep with the screen open.
I assume this is for the reed switch, where does the magnet go?
in the computer?
I found reference to the 12" ibook G4 1.2ghz with the reed switch under "end" key and the magnet in the screen. However I found the sensor "reed switch" in my screen in the right upper side.

I found it.
Message was edited by: Patrick Bagdasarian

Where is the GPS receiver located? I see 3 dots where the infared is...

Where is the GPS receiver located on the new iPhone 3G? I see 3 dots where the infared sensor is by the handset speaker... Is there an actual receiver? Why can't I find any real tech specs on the subject?
Can anyone point me in the right direction to learn more?

neuroanatomist wrote:
Yes, there is a REAL GPS receiver that communicates with REAL satellites.
That answers 'most' of it I did want to know that the new iPhone 3G ACTUALLY gets info directly from satellites (not just relayed from towers).
I also wanted to know where it was located... But I'm thinking now that it is internal and can not be seen from the outside. Is this possible? does GPS info from satellites go through the shell of the phone to an internal receiver?
I did some tests myself to see what the small 'dots' did near the 'ear' speaker did. Here is a pic of what I came up with after using a flashlight while covering some up with electrical tape:
http://slowdemon.com/images/iphone/nogps.jpg
Now, here are pictures from the links above saying that the receiver is located near those sensors (not my pics.. i stole them from the links/websites above):
http://slowdemon.com/images/iphone/iphone3g_gps_antlocation.jpg
http://slowdemon.com/images/iphone/iphonegps_01sm.jpg
Can someone clarify weather or not the GPS antenna is internal and can NOT be seen from the outside of the iPhone 3G?

JUST BACK FROM THE REPAIR CENTER AND THE SENSOR IS...

This is ridiculas now.
My phone was just away for two weeks, and the problem is still there! the screen is black in a call and it will not come back!!
THIS IS A PROBLEM THEY MUST SOLVE, NOT JUST BLAME IT ON A SCREEN PROTECTOR.
My phone dosent even have a screen protector, and I know where the sensor is. its totally clean and unobstructed.
What do I do now?!

Tbh I think that nokia repair centres are useless.
My phone bricked itself, I took it to a repair centre on the 28th of December, and have just found out They cannot fix it, and are sending it back to the store. They also put a red nokia 920 in as a black 900
Absolutely pathetic service, especially when you add in that i didnt get a temp phone, so i was without a mobile for a week and half, till i got back to my trusty n8.

HP LaserJet Enterprise 500 551dn - where did the drivers go?

I go to the download page to download the drivers for this 551dn. I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server. I downloaded them from here..
<http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
when i get the file, lets say for windows 7/64bit, i choose...
HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
24 Sep 2014 21.3
I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run. the file extracts - then POOF, the installer is gone.
where did the files go? They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
I was never asked for a file save location.... ??? really? is this this basic stuff?
Where are the files? this $$$ printer is a brick until i get drivers!
Thanks!
Jason
UPDATE- I FOUND THE FILES!!
First of all, HP... i'm not impressed.
All the files for all the drivers are in a series of temp folders...
C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
really?
hope this helps someone.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Sometimes I can't get out of Day view in iCal. There is no where on the screen to select month view, even when I close it out and go back into iCal.

Sometimes I am locked in "day" view in iCal. There is no where on the screen to choose "month" view, even when I close it out and open again. Tapping anywhere on the screen or scrolling doesn't help.

Give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try full screen again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Where did the Stream 7 drivers go?

The support page for downloading drivers for the HP Stream 7 tablet (any model) has disappeared from the HP website.
Navigating to the HP Stream 7 support page, Selecting "Software and Drivers", then "Go directly to software and drivers page", Operating System "Windows", then Version "Windows 8.1" (the only choices), then clicking the Update button, gives a message "No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product homepage. " This happens using Firefox, IE 11, or Chrome.
These drivers have been missing for at least a few weeks, and multiple forum users have also had no luck finding them. Before that time the drivers seemed to come and go randomly, but they've stayed missing now for weeks. One dorum user has posted direct FTP links to the drivers, and they might be the latest version, but not really sure.
Where did the drivers go, HP?

This is for the 5701 as of a few days ago.
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69307.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70275.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70340.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70339.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70337.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69308.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69305.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69309.exe

Where's the sensor?

Similar Messages

Maybe you are looking for