Where's the "use pressure" and "tilt" option?

Hi,
There's suppose to have "Use pressure" and "use tilt" options
in the "Brush tool" options.
They are not in my Flash 8 pro. Why?!?
How can I add them?!??! (windows xp)
Thank you,
Patrick

Patrick,
they are sub selections of the Brush tool in the toolbox. You
must have a Wacom tablet installed for
them to be an option.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Laval_PQ wrote:
> Hi,
>
> There's suppose to have "Use pressure" and "use tilt"
options in the "Brush
> tool" options.
>
> They are not in my Flash 8 pro. Why?!?
>
> How can I add them?!??! (windows xp)
>
> Thank you,
>
> Patrick
>

Similar Messages

Where is the attachment panel and page option in Designer?

In the document properties (in Acrobat), initial view tab and Navigation tab option you can select Attachments Panels and Page.
Can this be done is Designer can not seem to find a similar option.
Regards, John.

I found the answer myself. Looks like this new version does not support these features anymore: http://www.adobe.com/ro/products/flash-builder/buying-guide.html.
Strange...
The question rising here is what happens with this feature?
Will be available with a future update?
Will no longer be availalble in FlashBuilder, but in another Adobe Project?
Will never be available?
I belive this features are not important for advanced users... but I'm just learning this. I'm used to work in Flash. I write ActionScript, but I'm not familliar with the objects availlable in Flex, so the Component Panel and Design Mode is quite handy on this stage.
Plus, there is a real concern about the future of this technology, now beeing available HTML5. So, there is a question of oportunity investing time in learning things no longer supported. The most frustrating thing is not having an answer to this question. Even a "No" is better than "We don't know yet" <- the answer I received from online support.

I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..

I'm trying to use Dictation. Where does the text go, and how can I retrieve it? Thank you.

I'm trying to use Dictation. Where does the text go, and how can I retrieve it? Thank you.

You dictate after you open a blank page in any text editor. The text goes on the page.
You can use Text Edit for example (in your applications folder).
With the blank page open, go to the Edit menu and select Start Dictation. When you are finished, you save the file as you would any other document. You can retrieve it, edit it or anything else you want, because it is a file like any other you create with that text editor.

I have mac os x 10.6.8. I am trying to back up my information via time machine and it's not letting me click on the "use for back up" option.

I have mac os x 10.6.8. I am trying to back up my information via time machine and it's not letting me click on the "use for back up" option.

Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

My iPhone 4S shows I have over 6 GB of memory used for mail yet the mailboxes are more or less empty. Where is the memory going and how can I reduce it?

My iPhone 4S shows I have over 6 GB of memory used for mail yet the mailboxes are more or less empty. Where is the memory going and how can I reduce it?

I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

What is mean by Referential Integrity? Where do we use it and Why..?

Hi All,
Can anybody tell me, What is mean by Referential Integrity? Where do we use it and Why..?
Regards,
Kiran Telkar

Dear Kiran Telkar ,
you might be knowing that generally refrential integrity is concerned with nothing but primary key and foriegn key relationship. Generally we use to check uniqueness of records.
In sap we use it during flexible updation...to check the data records of transaction data and master data.
In other words, to check before loading of data, that whether loading will be properly or not.
we will check(tick) the option in the maintainance of the
<b>infosource--> communication structure</b>
it will be better if you clearly mention your problem, if further help is needed.
hope this will help you.
Regards
vinay
<i>please assign points to all who will help you.</i>

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click o

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?

Margaret
Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
1. The usual Premiere Elements 8 drill.
a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
Apple - QuickTime - Download
2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
a. Is computer opitimized, defragmented, etc.
CCleaner - PC Optimization and Cleaning - Free Download
b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
3. Project Specifics
For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
Video
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
Photos
Pixel dimensions and how many photos?
Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
ATR

How can I Hide(not Disable) the Save As and Exit options in the File menu of Excel Documents in SharePoint 2013?

Hi,
I want to hide(not disable) the "Save As" and "Exit" options in the File Menu of Excel Documents in SharePoint 2013.When I make changes in the excelribbon.css file of xlviewer.aspx,all the options under File menu are getting hidden but
I want to hide only these two options while retaining the others.
Kindly suggest me a method to achieve this.
Looking forward to your reply at the earliest.
Thanks in advance.
Regards,
Sanjana

Hi Sanjana,
To hide the “Save As” and “Exit” options in xlviewer.aspx page in SharePoint, I recommend to use the code below(however it is not recommended):
<style>
div.cui-menusection li.cui-menusection-items:nth-child(2)
display:none !important;
div#m_excelWebRenderer_ewaCtl_menuJewelSaveAs{
display:none !important;
div#m_excelWebRenderer_ewaCtl_msJewelSecondary{
display:none !important;
</style>
As “:nth-child()” selector is supported in IE 9 and later versions, please use IE 9 or later versions’ IE browser.
http://www.w3schools.com/cssref/sel_nth-child.asp
Best regards.
Thanks
Victoria Xia
TechNet Community Support

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT GIVE DETAILS

Hi,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
Refer
Business Content (Versions)
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

Where are the division, multiplication and subtractions on mac keyboard?

trying to do an microsoft excel tutorial on mac - where are the divide, subtract and multiply figures on the keyboard?

Use the -, *, and / keystrokes.
(123043)

Photoshop CC camera raw 8.5 where is the fill light and recovery buttons

I have mac OS and I downloaded Photoshop CC and camera raw 8.5, I don't' see fill light and recovery button.

Photoshop CC camera raw 8.5 where is the fill light and recovery buttons
Hi Teresa, you may have worked this out already? but i just downloaded Photoshop CC and I too used the recovery and fill light buttons and couldnt see them in the raw processing window... HOWEVER!! i did some research and they are available!! YAY, you can toggle between the latest and the older layout... and the recovery and fill optoins ARE there... the link explains it... but when you open some raw files... on the right you should see a little camera - camera calibration button when you click on there the first drop down PROCESS - change to 2012 mode and then click back to the BASIC processing wheel and they will be there... cheers Danni

Need to undo the "use for new links" option...???

Hello- Probably an easy answer to this one- I'm just not seeing it.....My first link I made on the page I clicked "use this for new links". Now I don't want to use that format for new links anymore. Do I always have to remember which link was the first one I created and change that one? Do all of the link have to have the same effect? How do I undo the "use for new links" option?
Thanks!
Holly

That's how I thought it should work- there must be something wrong then because after I click "use for new" once, the options are greyed out for any link made after that. Only the original one lets me change it, then all the others follow suit with the changes made to the one. Didn't seem right. Think I should reload iLife?

HT4796 Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Hello. It looks like I recovered all my keywords attached to photos. What I did:
First I located all photos without keywords using a metadata search.
I found that it seemed to be certain groups of photos that had no keywords. I decided to at least get the main keyword on all of those in a particular group, like Canyonlands.
Once I added one of the keywords, the others all showed up magically! I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
Don't understand why this occurred or why it got fixed, since it was so random. But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
Thanks for the discussion and help.

Where is the "Only update checked songs" option in the iPod Preferences

Please can somebody help me.
Where exactly is iPod Prefences and where is the "Only update checked songs" option.
Am about to go on a road trip and want things right.
Thanks
signed technoflop

i have itunes 7.0.2 which i assume is the same thing as 7.0 and whenever i plug in my ipod, click on the ipod icon, and go to summary tab, the only options i get are "sync music: All songs or playlists" or "sync music: selected playlists." there's no option for "only sync checked items." it's very frusterating. could you please give me very direct instructions on how to get only checked music onto my ipod? thanksss.

Where's the "use pressure" and "tilt" option?

Similar Messages

Maybe you are looking for