Where shoudl I save my images? (Was: images)

where should i save my images on my computer/ which directory so its an easy transition? should i just be naming them like image.jpg?

>where should i save my images on my computer
>/ which directory so its an easy transition?
Transition from what? Images can be stored anywhere within your defined site. It's up to you to decide how to organize. If the site is small, it might make sense to have a single "images" directory off the root. If it's bigger, you can make an image directory for each page, or organize by topic/category
>should i just be naming them like image.jpg?
They should have meaningful names so that you can easily recognize them.

Similar Messages

  • How do you save an image that was downloaded from an email into pages to my album?

    I had a friend email me a word document with images in it. The document was downloaded onto my iPad and opened in the pages app. I would now like to save the images from this document into my album so I can use them in other applications. I know how to save from the internet but cant get those save image options when I click on the image in pages. Also had a friend send a powerpoint that downloaded in pages. Would like to use images from that file as well. Help please!

    I am taking a guess here. The photo does not actually reside on the iPad or in the document itself, so you can't save it to the camera roll. You are just seeing the image on the screen. It may even print, but the photo itself is not on the device, so you can't save it.
    Ask him to email the photo itself.

  • Error message - image exceeds size save for web was designed for

    When I try to Save to Web in Illustrator CS3, I get the following error message: "the image exceeds the size save for web was designed for". Even when I click that I want to go ahead and save it, it sends another error that reads "could not complete this operation. the rasterized image exceeded the maximum bounds for Save for Web".
    Earlier in the day yesterday, I saved for web with no issue. NOw, it doesn't matter how small my design is, it is giving this error.
    Please advise.

    > So in CS3 Save for Web grabs the Artboard, neither the artwork nor the Crop Area/Marks area?
    Creating a new document using "Basic RGB Document" and then "Save for Web & Devices" crops either to the artboard or to the artwork as selected from the "image size" tab in the save-for-web window.
    If your artwork extends beyond the artboard, selecting "clip to artboard" will obviously eliminate everything outside the artboard. Unchecking it will crop the image to the artwork in the file (and thankfully not any artwork that is hidden).
    If you make crop marks in the file, you can choose to either clip to the artboard or not. Not will clip to the crop marks, acting as kind of a secondary artboard.
    ETA:
    You can choose which type of on-screen file type you want your output to be. From GIF, JPG, PNG-8, PNG-24, SWF, SVG, and WBMP. And whether or not you want transparency in those formats that support it.

  • Where does mail save images?

    When you hover over a picture a popup asks if you want to save the image...but where is it saved? I checked camera and photos, no go.

    If you tap the Save Image button then it should be saved in the Saved Photos/Camera Roll album in the Photos app. If they are not appearing then try closing the Photos app completely and then re-open to see if they appear : from the home screen (i.e.not with the Photos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Photos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You may have to re-try saving the photos.

  • I am done editing in Develop; how do I save edited images for web?

    I get the import and development options in Lightroom but I was told by a LR representative when I called for assistance that LR does not retain any data.  So, if I import photos from my camera (NEF files) and edit in Develop; where do I save the edited photos and how can I adjust them for optimum quality on the web?  It seems that there are instructions on how to import and save photos from your camera, etc. but once you modify the photo using Develop, is the original then modified as well?
    Sorry for the question, but I have modified several photos using the Develop Option and hate to lose all my work.  I am lost as what to do now in order to save my edits.  Ugh!
    Thank you to anyone who can help!  I am a MC Windows user if that helps.

    Editing in develop is totally non-destructive. All your develop settings are saved automatically in the LR database (catalog)
    For web usage select thumbnail(s) of your images in the Library and click Export. Choose jpeg, size, quality and resolution of 72 and set color space to sRGB. Add sharpening if desired. Choose a folder, sub-folder or desktop and export. Your jpeg copies will be ready to upload from your chosen folder when the export completes.

  • When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

    When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
    == This happened ==
    Every time Firefox opened
    == I updated to one of the firefox versions (Not sure which one it was)

    Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

  • Is there a way to save an image file as a jpeg and add -web or -print to the file name?

    I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name.  This way I can easily see which files are lower resolution for web posting or high resolution for printing.

    Jason,
    I helped somebody do a very similar thing about a week ago.
    The trick is to use the Batch command's ability to construct a file name.
    Tell the batch to append, e.g. "-x" without quotes, to the name of each saved file.
    The batch runs an Action which does a save as JPEG, resize image, add logo, save as JPEG, then close document.
    The output is "<document name>-x.jpg" and "<document name>-x-x.jpeg".
    Then use Windows Explorer to rename "*-x-x.jpg" to "*-print.jpg".
    Then rename "*-x.jpg" to "*-web.jpg".
    See http://forums.adobe.com/thread/1038992?start=32
    The name construction that I used there was just an "x" appended to the document name. Use whatever you like. Also juliew subsequently referred to the method as a "double-batch" run, although it is not. One run of the batch will output two JPEGs for each input document.
    I hope the disagreements in that thread don't cause too much disruption.
    If you want, the Batch command itself can be recorded in another Action which would store the parameters of the batch, then you could run that Action anytime without having to set up the details of the batch each time. It would always output to one specific folder, though.

  • Save the image in SAP R/3 which is dispalyed in the portal.

    Hi all,
    I am have developed the picture upload using the BSP i am getting image displayed in the portal but with a check box. I would like to save this image in the SAP system with BP id .
    So could you please help me out to do it.
    here the code I have used.
        data: entity         type ref to if_http_entity,
              file           type xstring,
              content_type   type string,
          content_length        type string,
              num_multiparts type i,
              i              type i value 1,
              doEcho         type string,
              value          type string.
      find multipart containing file
        num_multiparts = request->num_multiparts( ).
        while i <= num_multiparts.
          entity = request->get_multipart( i ).
          value = entity->get_header_field( '~content_filename' ).
          if not value is initial.
          found a file!
            navigation->set_parameter( name  = 'content_filename'
                                       value = value ).
            content_type = entity->get_header_field( 'Content-Type' ).
            navigation->set_parameter( name  = 'content_type'
                value = content_type ).
          get file content
            file = entity->get_data( ).
          get file size
            content_length = xstrlen( file ).
            navigation->set_parameter( name  = 'content_length'
                value = content_length ).
          echo/download the same file again?
            doEcho = request->get_form_field( 'doEcho' ).
        if doEcho is not initial.
            set response data to be the file content
              runtime->server->response->set_data( file ).
            set the mime-type and file size in the response
              runtime->server->response->set_header_field(
                name  = 'Content-Type'
                value = content_type ).
              runtime->server->response->set_header_field(
                name  = 'Content-Length'
                value = content_length ).
              runtime->server->response->delete_header_field(
                name = 'Cache-Control' ).
              runtime->server->response->delete_header_field(
                name = 'Expires' ).
        endif.
            exit.
        endif.
          i = i + 1.
        endwhile.
        if doEcho is not initial.
          signal to the BSP runtime that the response data is
          complete and no onLayout method should be called to
          create the response
            navigation->response_complete( ).
        else.
          navigation->goto_page('Hs Munich dear3.JPG').
        endif.
    With best regards,
    Suneetha

    Khaled,
    Purchase Document Item Data Source fullfills the requirement of the PO activity, i mean PO created which has PO date and PO amount.
    Let me tell you my situation in detail:
    The requirement is like this:
    The report should contain all the procurement activities and report should display the three different scenarios of Procurement cycle:
    1) Only PO done
    2) Only PO and GR done.
    3) PO,GR and Invoice all done.
    and all scenario should be in one report i.e., if PO only done, then the  GR and Invoice should show blank and similarly for others.
    So I tried the following things in DEV.
    1) Custom DSO which gets loaded from 2LIS_02_ITM( for PO Information - PO date,PO Number , PO Amount) and 2LIS_02_SGR( for GR information - GR Number, GR date)
    2) 0LIV_DS01 (BI content) loaded from Invoice verifcation datasource 2LIV_06_INV.
    Then Created Infoset(Custom DSO Left Outer Join 0LIV_DS01 ) and then checked the report but it doesnt fullfill all the scenario's of the Reporting as mentioned above..i.e., the report only shows the data only when Invoice done for the particular PO.
    So was trying to Build 3 Custom DSO's ( As similar to the SAP Business One Standard BI content DSO's  0SBO_O0,0SBO_O1,0SBO_O2) and then load it to the Cube and check whether it meets the requirement and so wanted to go for Generic Datasource..
    So, Can you please give your some valuable time to help me out in this situation and Correct me if have approached any long way ....and suggest to how to proceed?

  • Save an image from interactive form to R/3 system table

    Hi to all,
    my scenario is this: Web AS 7.0 (probably patched to the last available patch), NWDS 7.0 and, at the moment, a 4.6c R/3 backend system (within some months we will upgrade to ECC 6.0). I have an online interactive form with some input fields and a user, logged in, fills these fields and pressing the "Submit to SAP" button will save the datas to a custom table on 4.6c backend. All this is simple and is working, but my problem is that one of these fields is an image. The purpose is that the user click on the image field and load an image from local PC and then, pressing submit to SAP button, will save the image on the custom table.
    How can I make this? Which kind of context I have to bind to the image field? I have to add a java script/form calc code to image field? And to backend side, how can I do?
    Thank you very much in advance,
    Enrico

    Hi,
    In your forms you got the image or a link to the image ? If it's the image the field is define as an XSTRING is supposed. If yes you can add it easily in a database table.
    If it's a link, your SAP system ( 4.6 C ) need to the the repository where the image is and then you can add it in the database.If you SAP system doesn't see the repository it's impossible to do so.
    Hope this help you.
    Best regards

  • How to save an image in different format

    i want to save an image in different format (as .jpg ,.gif, .tiff, .png, .bmp) using save dialog box , where format should come in drop box menu "Save as type" in save dialoge box.what to do.???????plz any one suggest me .........

    alok_raj wrote:
    i want to save an image in different format (as .jpg ,.gif, .tiff, .png, .bmp) using save dialog box , where format should come in drop box menu "Save as type" in save dialoge box.what to do.???????plz any one suggest me .........1) Spell words properly. That word is 'please'.
    2) Fix your sticky keyboard for the '?' and '.' keys. Only one of those characters is generally needed to denote a question or the end of a sentence. Two or more often denotes a dweeb.
    I might come back to your question later, assuming I can actually bare looking at that mess long enough to figure out what you want.

  • Apex charts - right click, save as image (not responding)

    Hi,
    Yesterday when our users attempted to right-click on an anychart produced by Apex, then save as image - they were able to identify a location to save to, however the infinity image labelled 'saving' was presented indefinitely.
    At the same time, I noticed Anychart.com was down. This morning when I attempted the same action, now that Anychart.com is up, the process worked - correlation = causation?
    A previous post seems to suggest it might be possible to localise whatever is converting the chart to images/pdf
    Save as pdf/image does not work. It runs and runs ... Getting no output
    Does anyone have any further details on this? I can't locate any existing references to anychart.com within my application, constructed source, /i/ folder etc.
    Cheers
    Scott

    Hi Scott,
    So, if i understand properly, making this change
    <settings><pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
    will avoid atleast PDF issue? And as i dont have privileges to install or deinstall anything on /i/ folder, still this will work and URL path will remain same for each installation?
    Adding another question, as you said "it sends base64 information when converting to PDF", does it mean i will not be able to convert to PDF, if i am using intranet and PC's not accessible to internet?
    Thanks
    Sunil Bhatia

  • When I save an image it doesn't save correctly?

    So I recently turned on photo stream on my IPad 2 and I then I turned it off. So today I went on my iPad and started saving images where you hold on the image and the save image option pops up. Then when I went to my photos, old photos that I had taken started to mix with the new images and when I click on it, the picture is black. How do I fix it? Thanks.

    You should reset your ipad or all of update your İOS. When I saw pictures black, update or reset my ipad2.
    After Everything's normal

  • How to save uploaded image file to Apache Web Server from Tomcat

    Hi guys,
    Perhaps this is not an appropriate topic to ask under this forum but I really don't know where should I post my question. Hope you understand.
    Ok, I need to know if my web application is running in Tomcat5 and user uploading some image file where I need to save these image files to the other server, which is running Apache Web Server. Should I ftp to there or other better method ?
    Anyone got a better idea on doing this kind of process pls advice. Many Thanks !
    regards,
    Mark

    if your Apache server is running in the same computer and if your servlet have write access to the folder in apache under which you want to save the file you can just write the file there but you will have to address concurrency issues.
    Otherwise you will have to do ftp but since apache does not have abuilt in frp server you will need a seperate FTP server for this

  • How to save an image as a PICT resource file?

    Can someone tell me how to save an image as a PICT resource file? I'd like to make ikons in Photoshop and save them in this format, but I 'm not finding any leads. Thanks!

    If you have Resorcerer from "ancient times" it of course can handle resource forks since that's was it's goal in life.
    There are lots of icon creation apps these days.  Do a search for "icon" on macupdate.com to see what's available.  For example that search finds:
    iconXprit
    Icon Builder X

  • Save the image in the application server directly

    Hi,
          I have developed a report which displays piechart as the output and saves the image on the presentation server. For that i have used the following code.
       when 'SAVE'.
    DATA : D TYPE GFW_EXP_DATA,
    R TYPE SYMSGNO.
    DATA: S TYPE STRING,
    N TYPE I.
    CALL METHOD GP_INST->IF_GRAPHIC_PROXY~EXPORT
    EXPORTING
    FORMAT =
    IF_GRAPHIC_PROXY=>co_format_bmp
    WIDTH = 50
    HEIGHT = 200
    name = 'C:\Documents and Settings.........'
    IMPORTING
    CONTENT_TYPE = S
    CONTENT_LENGTH = N
    CONTENT = D
    RETVAL = R
    I have a requirement where i have to save the output of the screen(piechart)  in the application server directly with out using the presentaion server.
    Is there any method to do so.
    Thanks and regards,
    Parvatha Reddy

    Hi parvatha ,
    your question is really good.
    Well i really haven't come across your scenario i many years . But my suggestion is to  can use java code to achieve the same .
    Or try to use hexadecimal type in your normal class to read the pie-chart and use transfer with same type .

Maybe you are looking for