Where should i direct this question about dashboard and widgets?

i have a question about the dashboard and widgets, but i have no clue where to ask?
thanks.

Hi,
I advise you to use http://discussions.apple.com/forum.jspa?forumID=751 which is the area for dashboard
volker

Similar Messages

  • Where should I post a question about BusinessObjects CMC?

    I have a question about Business objects users administration in the CMC (Cental Management Console).  In which category or forum should I post this question?

    Hi Gurus,
    I am trying to add the dotted line relationship.
    I have gone through the post and learnt that by ading Reationship type 088 in T778V will solve my problem.
    But how do i create this relationship. I believe this is provided by ECC 6.0 version, is there some thing i need to Activate or should i create one.
    Let me know.

  • Help! Where should I post this question, so I can get it answer?

    I'm with the greastest Apple communuty on earth, but know ones responds to my question, except once. Is it worded incorrectly or difficult to understand. I been at for 4-5 months. Any help is well appreciated.
    see below for my past adventures:
    Can you help? I have pot this problem on the discussion board times 3 with no response except this time. See below.
    down;oading podcast
    Posted: Jun 23, 2007 8:04 AM
    
    Reply
    
    Email
    Can Itune get too full whereas it will stop downloading podcast automatically or manually? I just exported my 2006 " bibleonradio" podcast to a folder on my harddrive. Immediately itune started downloading podast from that site. But for the last 4-5 months it would hit and miss with downloading and the last 2 weeks it quit altogether.I would go to the site and download the podcast to a selected itune folder as a mp3 for listening.
    Do I need to do some type of maintenance to prevent this from occurring? The site is simple reading of bible scriptures. Could itunes get confuse with 2006 podcasts, thinking I already have the podcast, even though the release date for the new podast are mark 2007?
    imacG5 , super drive   Mac OS X (10.4.7)  
    
    Diane Wordsmith
    
    
    Posts: 266
    From: Nashville
    Registered: Feb 20, 2007
    Re: down;oading podcast
    Posted: Jun 24, 2007 9:23 AM    in response to: Austin Smith2
    
    Reply
    
    Email
    Look at the Podcasts in your iTunes Library. Do you see a little exclamation point to the left of the listing? If so, click on that.
    iBook G4 (& an iMac running OS 9)   Mac OS X (10.3.9)   iPod Video
    
    Austin Smith2
    
    Posts: 114
    Registered: Oct 31, 2001
    Re: down;oading podcast
    Posted: Jun 25, 2007 3:35 PM    in response to: Diane Wordsmith
    
    Reply
    
    Email
    Thank you for your reply:
    I have that symbol on some of my other podacst sites, but not this one because I listen to it daily, sometimes 2-3 times a day. Could the exclamation symbol for the othe sites, which goes away if I start listening to them again affect this podcast? but these site with the exclamation also hit and miss when itunes downloads, as much as 2-3 weeks once I start it back up.
    imacG5 , super drive   Mac OS X (10.4.7)  
    
    Diane Wordsmith
    
    
    Posts: 266
    From: Nashville
    Registered: Feb 20, 2007
    Re: down;oading podcast
    Posted: Jun 25, 2007 3:49 PM    in response to: Austin Smith2
    
    Reply
    
    Email
    What's happened to me is that some Podcasts I subscribe to I might get lazy about listening to. Several of the Podcasts will pile up, and after a while iTunes will stop updating if you haven't listened to them. When I click on that little exclamation point in a circle, it will tell me that iTunes hasn't been updating that podcast because I haven't listened to it in a while. I think it asks if you want to continue (or maybe you have to click on subscribe again to get them started back).
    If you are listening to this particular podcast every day, that shouldn't be a problem. And not listening to the other ones shouldn't affect this one. Sorry I can't be of more help, but I'm not sure what is causing it.
    You might go to iTunes> Preferences and click on the tab for Podcasts and see what your settings are there.
    Diane Wordsmith
    iBook G4 (& an iMac running OS 9)   Mac OS X (10.3.9)   iPod Video
    
    Austin Smith2
    
    Posts: 114
    Registered: Oct 31, 2001
    Re: down;oading podcast
    Posted: Jun 25, 2007 8:07 PM    in response to: Diane Wordsmith
    
    Reply
    
    Email
    Thank you again for your reply.
    My settings in preference for podcast are::
    check for new episodes-every hour
    when new episodes are available-download all
    keep-all episodes
    does anyone else have this problem or any idea how to fix it?
    2nd post
    
    Converting
    Posted: Jun 13, 2007 8:49 AM
    
    Reply
    
    Email
    Trying to come up with an alternative to incomplete podcasts downloads from a website. What I'm trying to do is convert some the missing podcasts file from a website that itune don't download-reason unknown. I'm able to download a mp3 file of the podcast from the web site to my desktop, but I would like to add this to my podcast library under the same name of the podcast that I subscribed, then add to my playlist for continuous playing. Is this possible?
    Thank for any Help,
    Austin
    3rd post
    
    automatic podcast downloads incomplete
    Posted: Jun 9, 2007 10:54 AM
    
    Reply
    
    Email
    I was on the wrong forum. Hope someone might have an answer.
    Austin Smith2
    Posts: 102
    Registered: Oct 31, 2001
    automatic downloads incomplete
    Posted: Jun 4, 2007 7:54 AM
    Reply Email
    Some Podcasts have many episodes and when I subscribe, I get them all at once. But with some podcasts ( http://www.bibleonradio.com/ ), only a few episodes download, and I know there are many others available either because I can see them listed by going directly to the site or because they are numbered and some are clearly missing. I have tried setting my preferences both to download the latest edition of a podcast when I update or to download ALL editions. No difference either way.
    Strangely enough, if I am patience , sometimes the gaps will fill themselves in or all at once when I choose to click update. Anyone have any ideas why this might be happening? Any help would be greatly appreciated. I email the web administrator and they said they were able to go to the itune store and download all the recent episodes. Below is my email conversation.
    Thanks,
    Austin
    imacG5 , super drive Mac OS X (10.4.7) Report this post
    Austin Smith2
    Posts: 102
    Registered: Oct 31, 2001
    Re: automatic downloads incomplete
    Posted: Jun 7, 2007 4:07 PM in response to: Austin Smith2
    Reply Email
    Oops, I left off the dialog. Hope someone can Help.
    Austin
    From: Austin Smith [mailto:[email protected]]
    Sent: Monday, February 19, 2007 7:16 AM
    To: [email protected]
    Subject: podcast
    no podcast downloading after feb 17th. Can you help?
    On Feb 19, 2007, at 8:45 AM, MasterMedia wrote:
    Austin,
    If you mean podcasting of the One Year Audio Bible, then whenever the podcasting is behind you can always go out to the website and download from there. That’s usually been updated even when the podcast has not. Sorry for the inconvenience but the podcast should be brought up to date soon.
    MasterMedia
    From: Austin Smith [mailto:[email protected]]
    Sent: Tuesday, February 20, 2007 7:21 AM
    To: MasterMedia
    Subject: Re: podcast
    Thank you for your quick reply.
    I was able to get itunes to download all the updates except,
    Feb 18 New testament,
    Feb 20 New Testament,
    Feb 22 Old and New Testament.
    Is this a problem on my end?
    You wrote, "If you mean podcasting of the One Year Audio Bible, then whenever the podcasting is behind you can always go out to the website and download from there."
    If I manually download the mp3 from your website, can I put them into the postcast library?
    From: [email protected]
    Subject: RE: podcast
    Date: February 20, 2007 9:14:44 AM CST
    To: [email protected]
    Austin,
    I just went out to the iTunes store and tried to download those dates you had a problem with and I was able to download them without any problem. Maybe you should try again. And yes, you can manually download them from our website and store them into your podcast library. I’ve done that before and it works too.
    MasterMedia
    imacG5 , super drive Mac OS X (10.4.7) Report this post
    StarDeb55
    Posts: 6,134
    From: Chandler,Az.
    Registered: Jan 8, 2005
    Re: automatic downloads incomplete
    Posted: Jun 7, 2007 4:12 PM in response to: Austin Smith2
    Reply Email
    Just a suggestion, since this is a podcast issue, you might find more help in the podcast section of the Mac forum.
    iMac G5 2.0 Mac OS X (10.4.9) 60GB 5G iPod, 2G iPod shuffle, iTunes 7.2 Report this post
    Austin Smith2
    Posts: 102
    Registered: Oct 31, 2001
    Re: automatic downloads incomplete
    Posted: Jun 9, 2007 10:50 AM in response to: StarDeb55
    Reply Email
    Thanks.
    imacG5 , super drive Mac OS X (10.4.7)
    imacG5 , super drive   Mac OS X (10.4.7)  
    Report this post
    Austin Smith2
    
    Posts: 114
    Registered: Oct 31, 2001
    
    Re: seeking wisdom-please help-automatic podcast downloads incomplete-
    Posted: Jun 13, 2007 7:29 AM    in response to: Austin Smith2
    
    Reply
    
    Email
    Guys am I asking the wrong question? I have posted this question 3 times, but I don;t get a reply. Am I in the wrong section? Am I the only one experiencing this problem?
    imacG5 , super drive   Mac OS X (10.4.7)  

    Hi I found the answer from another post. So far everything is working find. I been trying to fix this since march,
    from
    Mike N. (nahyun...
    Posts: 2,814
    From: New York, NY
    Registered: Oct 1, 2003
    Re: itune application and itune folder
    Posted: Jun 27, 2007 7:16 AM in response to: Austin Smith2
    Solved
    Reply Email
    Deleting the application rarely solves anything on Macs. A better starting point is normally to delete the preference file for the application (in Users/~/Library/Preferences/com.apple.itunes.plist) or see if you have the same problem in another user account on the computer.
    PM MDD(1.25GHz 1.25G-RAM 320G-HD) Mac OS X (10.4.10) 20"ACD USB2Connect MacBook (2.0 White)-2GB Report this post
    Austin Smith2
    Posts: 118
    Registered: Oct 31, 2001
    Re: itune application and itune folder
    Posted: Jun 27, 2007 12:51 PM in response to: Mike N. (nahyun...
    Reply Email
    Mike, deleting the preferences did the trick, but I don't know why. Itunes downloaded 5 days of podcast! Hurray!! Thank you!!!!!!!!!

  • Where should I post a question about VB6 applications? thanks

    Thanks for suggestion such that it won't be off topic.

    Hello,
    VB 6 is no longer supported by Microsoft. I’d suggest asking in one of the following third-party forums which support Visual Basic 6.
    VB forums
    VB City
    For further information, see:
    Where to post your VB 6 questions
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Hello , Anyone know how to resolve this question about "A" and "a" ?

    For example , i have one table test(name char(10)) . In this table ,there are two rows ,
    name
    A
    a
    For some reason , i want to get all these rows without using upper or lower functions. what should i do ?

    A thread about case/accent insensitive :
    Re: Case insensitive and accent insensitive queries
    Nicolas.

  • Where can I get my questions about JMX answered?

    Where can I get my questions about JMX answered?
    In the Jungle Mix of the World Wild Web, where are the dwellings of the JMX denizens?
    It recently came to my attention that the answer to that simple question may not be obvious...
    I hope the information provided there
    [ http://blogs.sun.com/roller/page/jmxetc#where_can_i_get_my ] will be helpful.
    Cheers,
    -- daniel

    See this page
    http://java.sun.com/products/JavaManagement/community/forum.html
    Bye for now
    CSJakharia

  • I'm getting this warning,but i dont know where is it located.please let me know,where should i rectify this? WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!Enab

    i'm getting this warning,but i dont know where is it located.please let me know,where should i rectify this?
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

    Hello,
    This seems not related to SQL Server but more related to Fusion or a missing DLL. The following resources may help you:
    http://blog.mediawhole.com/2010/08/enable-fusion-assembly-binding-logging.html
    http://jamesecampbell.blogspot.com/2011/11/how-to-enable-assembly-binding-logging.html
    http://www.codeproject.com/Tips/141281/WRN-Asssembly-binding-logging-is-turned-OFF
    http://stackoverflow.com/questions/5986930/assembly-binding-logging-is-turned-off
    Please verify if a missing DLL is specified before the "WRN: Assembly binding logging is turned OFF" message.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Management needs to address this question about Creative Cloud subscriptions

    Hopefully there is a satisfactory solution for this question.  Then and only then will I feel comfortable giving Creative Cloud a try.  I own Production Premium CS5.5 and Design Premium CS6. In addition I have stand alones of Photoshop CS5.1, Premiere Pro CS6, Acrobat Pro 9, Lightroom 4 (2 copies) and probably another package I'm not thinking about right now.  If I convert to Creative Cloud and two years from now when CS7 or possible CS8 is the current version and I decide end my subscription to Creative Cloud reverting back to the disk version ownership, I will be required to pay additional money because I didn't keep my disk ownership current.  I used to upgrade my Production Premium Suite every other version.  I owned CS4 in that suite and when CS5.5 was released, I was required to pay an additional $250 (if memory is correct) because I hadn't upgraded to Version CS5.  I think that subscribing to Creative Cloud should not open me up to my license being devalued because I chose the subscription (at essentially the same price for what I use) over buying the disk.  Adobe, will you comment on this situation and add it to management discussions to assure faithful customers we won't have our current licenses put into jeopardy? 

    akrafter wrote:
    I like the idea of Creative Cloud but subscribing to it for a mandatory 1-year is binding.
    Thare are two joining options: monthly (higher monthly fee) or 12 month contract, billed monthly(lower monthly fee)
    akrafter wrote:
    And after the one year, do you go on a month-to-month or do you have to sign on for another year?  I'm sure that's in the fine print someplace but I haven't noticed it.
    Auto-renewed unless you cancel.
    http://www.adobe.com/au/products/creativecloud/faq.html
    At the end of my annual membership, what do I need to do to renew it?
    If you would like to renew your annual membership for another year, you do not need to do anything. Your account is set to auto-renew so that you will not experience any interruption in access to your Creative Cloud products and services.
    How do I cancel my one-year membership?
    To cancel a one-year membership, you can either go online to the Account page on www.creativecloud.com or contact Adobe Customer Service. If you cancel your membership before meeting the 12-month commitment date, you will be charged 50% of the remaining amount left on your contract.
    akrafter wrote:
    I hope a lot more people ask the question and do as I'm doing, not buy into Creative Cloud until a satisfactory solution is arrived at.  I like the looks of the CC package and I think it has value but not at the loss of value for my Creative Suite.
    Not sure you'll get a definitive answer to that before CS7 arrives.
    And you'll need a CS6 perpetual license in order to upgrade to CS7.
    So I suspect a CS6 purchasing/upgrading decision (Cloud or traditional upgrade) will have to be made based on the info currently available.

  • Basic question about storage and safety in iMovie '11

    A very basic question about storage and safety:
    I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
    1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
    2. Duplicate that footage/clips.
    3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
    4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
    5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
    6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
    I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
    QUESTION:
    Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
    *Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
    In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
    This time around with iMovie '11 I don't to make such novice, ignorant errors.
    Thanks so much for any comments to this question.
    -L

    Yes I'm sure it will work great for you.
    The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
    iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
    iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
    Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

  • Question regarding Dashboard and column prompt

    My question regarding Dashboard and column prompt:
    1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
    2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

    Hi Toony,...
    I think there was another way of doing this...
    In the dashboard prompt go to Show option > select SQL Results from dropdown.
    There you need to write your Logical SQL like...
    SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
    Here.. Periods.Year is the column which is already exists in repository's presentation layer..
    and difference of date functionality is the code or formula of column which you want to show in drop-down...
    Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
    I think it helps you in doing this..
    Just check and inform me if it works...
    Thanks & Regards
    Kishore Guggilla
    Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

  • A question about grub and USB

    Hi All
    I have a quick question about grub and USB that I can't quite find the answer to by searching.   Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this.  I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife).  I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR.  So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick?  My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive. 
    Thanks
    Kev

    i cant say for hp's
    havent worked on any in a while
    recent machines have been coupleof dell's , vaio & emachine
    which dells do offer it at least the ones i tried , my laptop does(dell)
    all home pc's are built by me which do offer to boot individual drives
    what hp you getting it may tell in specs
    are both discs sata? if so it might not offer this option with 2 drives of same interface
    check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
    & will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
    i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
    i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
    if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
    i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
    for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
    i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
    you may want to consider this in your next venture for pc

  • A few questions about MacBooks and Parallels Desktop.

    I have a few questions about MacBooks and Parallels Desktop.
    1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
    2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
    3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
    Thanks
    Keith

    1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
    2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
    Remember to leave at least 2 or 3 Gb for virtual memory usage.
    3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
    Good Luck

  • One question about Pricing and Conditions puzzle me for a long time!

    One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
    1-First,my sale order use pricing procedure RVAA01.
    2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
    3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
    4-Next,the Access Sequences PR00 have some Condition tables,such as:
         table 118 : "Empties" Prices (Material-Dependent)
         table 5 : Customer/Material
         table 6 : Price List Type/Currency/Material
         table 4 : Material
    5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
    A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
    B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
    Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can  explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

    Hi,
    You said that you are using the T.codes VK31 or VK32.
    These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
    Pl check using T.code VK11 OR VK12 (change mode)
    Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
    After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
    You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
    You can give all the required values and save the conditon record.
    Hope this is clear.
    REWARD IF HELPFUL.
    Regards,
    praveen

  • 2 question about GPU and Lens correction ,cs5

    Hi
    i have 2 questions about Gpu and lens correction in Cs5
    1)Filter->lens correction->search online
    i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
    is it normal?
    2) question is about Gpu
    it run faster , but talking about ajustament layer
    like saturation or vibrance for example
    i found with the gpu on , a light slow refresh compared with gpu off
    i have set cache  levels 6 ,history 20
    i guess are the defaul
    well i add a saturation layer and move the saturation slide ,increase o decrease saturation
    with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
    with Gpu On it takes a few(very few) time more
    again is normal ?
    don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
    thanks

    For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay.  Second click turns up results immediately.  This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions.  Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
    I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key.  Strange.
    Windows 7 x64.
    -Noel

  • Three questions about Java and Ftp

    Hello, i've the following questions about Java and Ftp:
    1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");
    2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
    3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
    Thanks in advanced!!!
    Kike

    1- .netrc file is in $HOME directory but i can't
    access to this directory from java code. The
    following line producesan Exception (directory
    doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
    think you can use it as part of a legal path.
    Instead, use System.getProperty("user.home");
    Ok, thanks
    2- .netrc file must have the followingpermissions:
    -rw- --- --- but when i create the .netrc file the
    following permissions are on default: -rw- r--r--,
    how can i change this permissions? (In java code,i
    can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
    I need to use estrictly the .netrc with -rw- --- --- permissions
    Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
    3- Are there any way to pass parameters to a.netrc
    file? If i get to do this i needn't change the
    permissions because i can't modify orcreate/destroy
    this file.I don't think so. Why do you need the .netrc file in
    Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
    - modify .netrc (for me is the complex option)
    - destroy and create a new .netrc (is easier but i have permissions problem)
    - use .netrc with parameters but i haven't found any help about it
    Thanks for your prompt reply!!!!
    Kike

Maybe you are looking for