Where should i found the executed automation test cases result in TestResult folder?

we are using VS2013, i have automated some coded ui test cases and executed from test explorer. once completed i am able to view the test result in the Test explorer window. But I am unable to view in the 'TestResult' folder under project location. (In The
Test result folder created IN & Out sub folder ) I think it should be create .trx file under TestResult folder. is there any configuration required.
Please guide me.
Thanks in Advance.

Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know that when we automated coded ui test cases from VS IDE, it is default that there have no the .trx file be created in the TestResult folder. However, there have a replace workaround that we can automate coded ui test cases using MSTest.exe
in command line. And then we can get the .trx file be created in the TestResult folder.
So you can execute the /resultsfile command to get the .trx file using mstest.exe in command line.
Reference:
https://msdn.microsoft.com/en-us/library/ms182489.aspx?f=255&MSPPError=-2147217396
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Where should I put the sevlet

I just started to work with Tomcat and I compiled the helloWorld sevlet.
It's said from a book that the sevlet should be placed in serlver_root/webapps/ROOT/WEB-INF/classes, however there isn't a "classes" folder in my WEB-INF folder. So I put the helloWorld sevlet in the WEB-INF folder.
Then I type http://localhost:8080/servlet/helloworld in my browser, I get a message from the sever said "The requested resource (/servlet/HelloWorld) is not available".
Could anybody tell me how can solve this prolbem, where should I put the sevelt?

have ones more a look to your book - especially to information about the configuration file "web.xml" which also should be placed in the WEB-INF folder. This file defines which servlets should be found by the server and which request-URL should be mapped to this servlet.
for examples concerning the web.xml file see those already defined in your server. copy one and edit it for your needs. if you really want to understand what else might be configured using web.xml see the DTD for this file - it's pretty good documented!
hope it helps :)

How to execute Coded UI automated test case remotely without installing Visual studio?

We are using visual studio 2013 premium. my object is to run the Coded ui automated test case remotely without installing visual studio. can you guide me how to approach it successfully ?
Thanks in Advance..

Hi Divakar,
According to your description,
as far as I know that if we want to run the automation test remotely without vs using mstest, we will need to install and configure the test controller and the test agent machine.
Please refer to the following steps configure the test controller on locally machine and install a test agent on the remotely machine.
Note: If you an
automation test on locally machine, we must make sure the test agent be installed on remotely
machine.
Step1: you can try to
configure test controller and agent, for more information:
http://msdn.microsoft.com/en-us/library/hh546459.aspx
Step2: you will need to
assign roles to a Test Controller and Test Agent for Automated Testing in Visual Studio, please see:
http://msdn.microsoft.com/en-us/library/ff469838.aspx
Note: you will need to add a testsetting file before you assign roles to a Test Controller and Test Agent for Automated
Testing in Visual Studio.
Reference:
http://msdn.microsoft.com/en-us/library/ee256991.aspx
Step3: After you configure and install the test controller and test agent successfully, we can
executed coded UI test remotely using mstest.exe on test agent machine, we would call the testsetting file in command line.
Reference:
How
to use MSTest.exe command-line options
In addition, I find an article about
Running tests in mstest without installing the VS IDE, please see:
http://blogs.msdn.com/b/anutthara/archive/2009/12/16/running-tests-in-mstest-without-installing-the-vs-ide.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Where can i found the download software of oracle identity manager 9.1.0.

where can i found the download software of oracle identity manager 9.1.0.1 Remote Manager
. can any one help me.
Edited by: user10545341 on Jul 29, 2011 8:19 AM

And follow the steps to complete your task:
Agents in Active Directory 9.1.0.2
hope this helps,
Thiago L Guimaraes

Where Should I Set the Layer Break Marker?

I am burning to a Memorex DVD+R DL media------
I received this error message when burning:
"Formatting was not successful. Layer 0 exceeds the
maximum layer size allowed. Please choose a suitable
marker location that will support this condition."
I placed one approx halfway through my main sequence, which
is a total of 4.6 GB, but I am still receiving this message.
Where should I place the marker so I can successfully output?
My total project is about 6.2 GB.

So you are telling me that I could delete the DNS from each machine and set it in either the new modem or Time Capsule router.
That is correct!
I guess what I'm confused at is what device is doing what.
Let's look at a few examples, hopefully to help understand where all these protocols/services (PPPoE, DNS, & DHCP) come into play:
Scenario 1: Modem > Computer
In this scenario, your ISP provides the DNS server IP address information to your computer via DHCP. DHCP also provides the other important IP address information: IPv4 address, subnet mask, & router IP to your computer in order to communicate on the Internet.
Since your DSL ISP requires that you are authorized to access their Internet service, they utilize PPPoE to pass your account credentials (username & password) from your computer to their authorization server. Once verified, you are granted access.
Scenario 2: Modem > Router (Actiontec) > Computer
In this scenario, your Actiontec router provides your account credential (via PPPoE) to the ISP and also acts as a DHCP server. As a DHCP server, it provides your computer with the required IP addresses and passes on the ISP's DNS IP addresses as well. You do have an option with this router to enter a different set of DNS IP addresses ... like those for Google DNS or OpenDNS if you do NOT want to use the ISP's DNS servers. In this case, the Actiontec, uses its DHCP server to provide those addresses to your computer.
Scenario 3: Modem > Upstream Router (Actiontec) > Downstream Router (TC) > Computer
Since you have the TC configured as a bridge, it is basically a "pass-through" device. That is, the Actiontec will continue to provide the IP addresses just like in Scenario 2 "through" the TC so that wired or wireless clients connected to the TC get the addresses. Also, like in Scenario 2, you can assign DNS IP addresses on the TC ... and these would be provided to clients connected to it.

HT1766 where can i found the back-up data in computer from Iphone?

Where Can I found the Back-Up data Computer (Iphone to Computer)? ty

If you mean your iPhone backup, you can't see any files in the backup, you can only restore it to your phone. You can confirm that you have one by going to Settings>iCloud>Storage & Backup>Manage Storage and seeing that your phone is listed at the top under Backups.

Where should i call the rfc function module? in xi or in r/3

where should i call the rfc function module?
for the synch scenario: file < -- > xi <---> rfc
i know the type of rfc is tcp/ip; but i'm not sure with the followings,
and with some trials i can not even see any message via rwb even all the setting
can be activated without errors.
where should i create the rfc destination? in r/3 or xi
where should i call the rfc via abap program? in r/3 or xi
i guess the calling program should belong to the different server with the rfc itself....
so confused....
Thanks for your reply!!
Jun

if i create the destination in xi point to r/3, then i call the rfc use the destination in r/3 right ?
The call doesnt use the destination in R3. XI has the RFC destination which is just used to connect to the R3 system
but where i need to create the fm via se37? in xi or r/3 ?
In R3
Regards,
Prateek

Where should i put the DEFAULT&SMARTBAR

Hello,
where should i put the DEFAULT&SMARTBAR ? and the main Menu ?
in order to be shown in each form..
in using Forms 6i.
Regards,
Abdetu..

Hello Gerd,
Thanks for reply..
put such things into *a reference form* what is meant by a reference form do u mean the main form?
Create a property class (PC) for your FORM-MODULE-properties,
put this PC into the reference form.
Create there an object group (OG), put the PC into the OG and the inherit the OG to your local form.
Automatically you have then the PC inherited too.i did all what u mentioned..
Bbut the problem is that the DEFAULT&SMARTBAR
can't be seen in allllllllllll my forms in the main menu inspite of i put it into the form module property ->in the intial menu property.
Regards,
Abdetu..

Where should I change the adapter? It doesn't work from the start.

where should I change the adapter? It doesn't work from the start. But there is no apple store in our city.

The phone does not charge when linking with adaptor. But it is OK when linking PC using USB instead. I do not know why, but I am just sure there is something wrong with the adaptor.

HT5824 where can i found the back up info that I have backed up from my iphone?

where can I found the back up info that I have backed up from my Iphone?

If you mean your iPhone backup, you can't see any files in the backup, you can only restore it to your phone. You can confirm that you have one by going to Settings>iCloud>Storage & Backup>Manage Storage and seeing that your phone is listed at the top under Backups.

Where should I have the create table

I am making an application which it has a customer, an order and a food objects.
I know that I can do it in one class (which will have main inside) but I am trying to make it as object oriented..
so.. I have to make a class for a customer, a class for food, and I will handle all this in another class which will have main method..
am I right up to here??
if yes I was now wondering where should I have the sql statment about creating the table.. my thought is to have it at the constructor so when I will make a customer object the table will be created..
then I will have an add_data(d1,d2,d3,d4....) method where I will insert the data to my database for each customer.. actually only one time I will make a customer object from main and then through this I will call add_data() method to add customers to my database..
Am i thinking right or I am too far away from what I must do...?
Thx

Doesn't particularily matter given that the application is small.
However in larger applications the database is created outside of the application usually using a SQL script.

Where Should I put the time capsule?

Where Should I put the time capsule?
I'm using a wireless modem/router provided by the internet company, and both (the TC and the router) are located next to the pc, in the living room . Using this way, I don't have signal in my bedroom. Should I get a signal amplifier?
Thanks!

It would be better to use EOP adapters (homeplug is another name) or ethernet to locate the TC closer to your room.. you can use another apple router to extend the wireless if you need to.

Where should I store the collatoral files that are associated with photos stored in lightroom?

Where should I store the collatoral files that are associated with photos stored in lightroom? Items such as pdf files, word documents, etc. How should I connect them to each other so I can find both the photo and the related data?

Lightroom itself will not help you with pdf, word, etc.
However, there is a plugin you can use called AnyFile which will allow you to manage these documents in Lightroom (by assigning keywords and other metadata) so that you can search for all documents (photos, pdf, word, music, powerpoint, etc.) with given metadata.
Because you do this via metadata, it doesn't matter where you put these files. Put them anywhere you want.

Where should I save the camera calibration profile for Lightroom 2?

I created some DNG Camera Profiles by DNG Profile Editor. For Camera Calibration in Camera Raw, I save those .dcp files in C:\ Administrator\ Documents and Settings\ Application Data\ Adobe\ Camera Raw \ CameraProfiles. However, I could't find such a subfolder in Lightroom folder, does any one know where should I save the dcp files for Lightroom 2? Thank you

It's the same install folder for both Camera Raw and Lightroom (i.e., a .dcp installed in the folder you described will be readable by both CR and LR).
Eric

HT201301 where should i save the files to, in order to acces them

where should i save the files to, in order to acces them

What files?
To access from where?
Please explain

Where should i found the executed automation test cases result in TestResult folder?

Similar Messages

Maybe you are looking for