Where should I install the content from FCS2

Hi
Just re-installing FCS2 and was wondering whether it would be good practice to install the content on a disk other than the system disk. Any pros and cons would be greatly appreciated.
Many thanks
Mark

P.S. I'm assuming you're talking about the "additional content", and not the apps themselves, which must remain in your Apps folder on your system disk.

Similar Messages

Where should I install the application itself as well as my library (SSD vs. HDD)?

I have a seperate OS 100GB Sata III SSD drive along with another a 240GB Sata III SSD and then a RAID 0 configuration of two 500GB 7200 regular HDD totalling about 950GB of space. I want to install Lightroom, Photoshop and Premiere. Where shoud I put everything for best performance? The applications could go on the RAID 0 HDD drives and then put my video and picture library on the 240GB Sata III SSD drive. Wouldn't this allow for faster access to pictures and video since the application itself, once loaded, doesn't need to be accessed as often? It's been a while since I've used both of these programs. Isn't there also a "scratch" or "cache" directory as well? Where should I put that for best peformance?

Yes, the programs use their own cache/ swap files. Doesn't realyl matter where you put them. All your drivces are fast enough for any single one of them.
Mylenium

Where should I change the adapter? It doesn't work from the start.

where should I change the adapter? It doesn't work from the start. But there is no apple store in our city.

The phone does not charge when linking with adaptor. But it is OK when linking PC using USB instead. I do not know why, but I am just sure there is something wrong with the adaptor.

I installed the program from Creative Cloud but I can't find it in my computer...what should I do?

I installed the program from Creative Cloud but I can't find it in my computer...what should I do?

I have the same problem
OS windows 7 32bit

I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ? YoursdisillusionedbyLogic

I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogic

Hi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT

I'm from israel and i need to use my iphone Warranty Where should I send the device?

hi,
i'm from israel and i need to use my iphone Warranty Where should I send the device to fix some problem?

Depends on where the device was purchased.
If it was purchased in Israel, take it to an authorized service center in Israel.
If it was purchased elsewhere, you'll need to take it back to the country it was purchased in for support.

How to Retrive the content from Archive folder ???

Hi,
1. I was working on the archiving of the documents and was able to archive the docs into a local archive folder.
Then I had to test a scenario where when the user wants to search for a document with a specific ContentId, if the ContentId was not present in the content repository, then the content manager has to search for the same in the archived documents. Is this achievable?
While testing the above, the UCM server had stopped indexing and started giving a Interrupted exception for indexing. While we do a normal checkin also the documents are in DONE status and are not getting published. Tried restarting the indexer also but in vain. How can we restart the indexing so as to publish the docs?
2. indexing not working even for normal checkin the content.its showing error "indexing aborted" ? content never gets released after checkedin the content ? its struch in done status ?
while importing the content to ucm serverl, i have deleted "testarchive " (which was exported from contentserver) from Archive folder in UCM install directory.. then many contents were in done status at contentmanagement-> workin progress. Errors showing in content server ...
Indexing aborted. Error: Directory 'C:/UCM/archives/testacrchive' does not exist. Directory 'C:/UCM/archives/testacrchive' does not exist. [ Details ]
An error has occurred. The stack trace below shows more information.
!csIndexerAbortedMsg!syGeneralError!syFileUtilsDirNotFound,C:/UCM/archives/testacrchive!syFileUtilsDirNotFound,C:/UCM/archives/testacrchive
intradoc.common.ServiceException: !syGeneralError
     at intradoc.common.FileUtils.testFileSystem(FileUtils.java:452)
     at intradoc.server.archive.ArchiveUtils.readFileEx(ArchiveUtils.java:215)
     at intradoc.server.archive.ArchiveUtils.readFile(ArchiveUtils.java:193)
     at intradoc.server.archive.ArchiveUtils.readArchiveFile(ArchiveUtils.java:158)
     at intradoc.server.IndexerReplication.readArchiveProperties(IndexerReplication.java:279)
     at intradoc.server.IndexerReplication.doReplication(IndexerReplication.java:156)
     at intradoc.server.IndexerReplication.doWork(IndexerReplication.java:92)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:431)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:340)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
Caused by: intradoc.common.ServiceException: !syFileUtilsDirNotFound,C:/UCM/archives/testacrchive!syFileUtilsDirNotFound,C:/UCM/archives/testacrchive
     at intradoc.common.FileUtils.validatePath(FileUtils.java:801)
     at intradoc.common.FileUtils.validateDirectory(FileUtils.java:781)
     at intradoc.common.FileUtils.testFileSystem(FileUtils.java:437)
     ... 10 more
Error showing in Archive logs
Instance idc with archive testAcrchive is no longer being exported. Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!csReplicationInstanceRemoved,idc,testAcrchive!syExceptionType,java.lang.Throwable
java.lang.Throwable
     at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:81)
     at intradoc.common.Log.addMessage(Log.java:268)
     at intradoc.common.Log.errorEx2(Log.java:216)
     at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:97)
     at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:462)
     at intradoc.common.SystemUtils.errEx(SystemUtils.java:547)
     at intradoc.server.IndexerReplication.doExport(IndexerReplication.java:196)
     at intradoc.server.IndexerReplication.doReplication(IndexerReplication.java:169)
     at intradoc.server.IndexerReplication.doWork(IndexerReplication.java:92)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:431)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:340)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
Please resove the above issues,
Please helpme out... this is pretty urgent as i am strucked at my work ? how to get relase the content ?
thanks inadvance.
Thanks,
yt
Edited by: 792821 on Oct 28, 2010 12:17 PM

hi,
We wanted to achieve the following.
1) Data which is older more than 2 months should be sent and stored in a different storage device[ example: SAN storage / oracle storage etc ].
2) When user requests for the contentId and if its older more than 2 months, the request has to search / retrieve the secondary storage system and get the documents.
As of now, we need not required archival things, we just need retrive documents from out side devices. it can be SAS or any other storage device/unit.
i just need to retrive the content based on metadata from other storage device.
lets say one example , we have large amount data which is stored in one device or hard disc
it can be SAS or any storge unit, using UCM, i need to retrive to the content from storage device/unit.
how to retrive document from out side device ? how i need to configure for other storge unit ? is it possible through provider for providing other system information in UCM server ? is there any other alternate way ???
how it be achived ? how to config to other storage device using ucm ?
this requirement is very very urgent and we need proper soluation, so could please let me know soluation with a in detail description.
thanks in advance

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Where Should I Set the Layer Break Marker?

I am burning to a Memorex DVD+R DL media------
I received this error message when burning:
"Formatting was not successful. Layer 0 exceeds the
maximum layer size allowed. Please choose a suitable
marker location that will support this condition."
I placed one approx halfway through my main sequence, which
is a total of 4.6 GB, but I am still receiving this message.
Where should I place the marker so I can successfully output?
My total project is about 6.2 GB.

So you are telling me that I could delete the DNS from each machine and set it in either the new modem or Time Capsule router.
That is correct!
I guess what I'm confused at is what device is doing what.
Let's look at a few examples, hopefully to help understand where all these protocols/services (PPPoE, DNS, & DHCP) come into play:
Scenario 1: Modem > Computer
In this scenario, your ISP provides the DNS server IP address information to your computer via DHCP. DHCP also provides the other important IP address information: IPv4 address, subnet mask, & router IP to your computer in order to communicate on the Internet.
Since your DSL ISP requires that you are authorized to access their Internet service, they utilize PPPoE to pass your account credentials (username & password) from your computer to their authorization server. Once verified, you are granted access.
Scenario 2: Modem > Router (Actiontec) > Computer
In this scenario, your Actiontec router provides your account credential (via PPPoE) to the ISP and also acts as a DHCP server. As a DHCP server, it provides your computer with the required IP addresses and passes on the ISP's DNS IP addresses as well. You do have an option with this router to enter a different set of DNS IP addresses ... like those for Google DNS or OpenDNS if you do NOT want to use the ISP's DNS servers. In this case, the Actiontec, uses its DHCP server to provide those addresses to your computer.
Scenario 3: Modem > Upstream Router (Actiontec) > Downstream Router (TC) > Computer
Since you have the TC configured as a bridge, it is basically a "pass-through" device. That is, the Actiontec will continue to provide the IP addresses just like in Scenario 2 "through" the TC so that wired or wireless clients connected to the TC get the addresses. Also, like in Scenario 2, you can assign DNS IP addresses on the TC ... and these would be provided to clients connected to it.

How do I install the Content DVD in CS4 Web Premium?

I can't find anything about this on the forum. Sorry if it has been asked before (I know it's a very basic question), but can anyone tell me how I install the Content DVD in CS4 Web Premium, please? This is the DVD that contains the PDF manuals, Fonts and samples / tutorials for Fireworks and Photoshop.
The first two DVDs (Application 1 and 2) installed automatically, and then went straight to the Registration page without prompting me to insert any further DVDs. All of the software from the first two DVDs seems to have installed correctly.
However, when I insert the third DVD (Content), it will not auto-run. I see ut contains an "autorun.inf" file that references a program called "autoplay.exe", but the latter isn't present on the DVD. Could this be the problem?
I would be grateful for any suggestions.

Cutomer support on this issue is attrocious.
Here is what I asked them:
"Can you please tell me how to install the Content DVD in CS4 Web Premium? This is the DVD that contains the PDF manuals, Fonts and s
amples / tutorials for Fireworks and Photoshop.
The first two DVDs (Application 1 and 2) installed automatically, and then went straight to the Registration page without prompting
me to insert any further DVDs. All of the software from the Application 1 and 2 DVDs seems to have installed correctly.
However, when I insert the third DVD (Content), it will not auto-run. Browsing the DVD, I see that it contains an "autorun.inf" file
that references a program called "autoplay.exe", but the latter isn't present on the DVD. Could this be the problem?
I would be grateful for any suggestions."
This is their reply:
"Hello ????????
Thanks for contacting Adobe's Support, My name is ??????? and I am
responding to you in reference to your Web Request posted on 09/03/2009,
regarding you want to know install the Creative Suite Premium and its
related softwares . I am really thankful to you for showing interests in
our products.
I wants to inform you that you need to install the first disk then you
can install the second disk as per issue i wants to indorm you that if
you dont have the adobe reader then you cannot view the pdf file from
this .For that first af all you need to install the Creative Suite
Premium.If you have any confusions regarding this i would request you
please call to the techical support for this as it is supported by us on
phone as well.
Warm Regards
Adobe Support"
All very polite, but totally useless. They clearly haven't understood a word I said.

Installing the Content CD?

I'm reinstalling CS3 (I know it's an old one) after a crash. It's been a while and I'm trying to install the Content CD. It doesn't seem to install or automatically run. How do I install this? Should it be in the Bridge? Thanks!

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

How can I add the content from a iPod Nano to a new iTunes account

how can I add the content from a iPod Nano to a new iTunes account

On the computer in iTunes log into her Apple ID and then see if recent purchases are shown by clicking on her name in iTunes, entering her password and then selecting the option. If there is nothing there then she bought that music with a different Apple ID.
You can use TouchCopy to move all the songs on the iPod to the computer. Then try to play one of the purchase songs and it should show the account used to purchase it and ask for the password.

Where should I have the create table

I am making an application which it has a customer, an order and a food objects.
I know that I can do it in one class (which will have main inside) but I am trying to make it as object oriented..
so.. I have to make a class for a customer, a class for food, and I will handle all this in another class which will have main method..
am I right up to here??
if yes I was now wondering where should I have the sql statment about creating the table.. my thought is to have it at the constructor so when I will make a customer object the table will be created..
then I will have an add_data(d1,d2,d3,d4....) method where I will insert the data to my database for each customer.. actually only one time I will make a customer object from main and then through this I will call add_data() method to add customers to my database..
Am i thinking right or I am too far away from what I must do...?
Thx

Doesn't particularily matter given that the application is small.
However in larger applications the database is created outside of the application usually using a SQL script.

Where should I put the sevlet

I just started to work with Tomcat and I compiled the helloWorld sevlet.
It's said from a book that the sevlet should be placed in serlver_root/webapps/ROOT/WEB-INF/classes, however there isn't a "classes" folder in my WEB-INF folder. So I put the helloWorld sevlet in the WEB-INF folder.
Then I type http://localhost:8080/servlet/helloworld in my browser, I get a message from the sever said "The requested resource (/servlet/HelloWorld) is not available".
Could anybody tell me how can solve this prolbem, where should I put the sevelt?

have ones more a look to your book - especially to information about the configuration file "web.xml" which also should be placed in the WEB-INF folder. This file defines which servlets should be found by the server and which request-URL should be mapped to this servlet.
for examples concerning the web.xml file see those already defined in your server. copy one and edit it for your needs. if you really want to understand what else might be configured using web.xml see the DTD for this file - it's pretty good documented!
hope it helps :)

Get the content from the PDF file IN WD ABAP View

Hi all,
I have a offline interactive form with data filled in that and save in my desktop. I want to upload the PDF content ( data ) into Web dynpro view.
Currently i have the view designed with all the input box bound with the respective fields in the context and these fields are same as Adobe form fields.
I have a UI element to browse and pick the file from the desktop. I have the upload button to upload the data into it.
When i click the upload button it goes for dump. " No Enough Information for processing or Output"
*Get the content from the file
WD_CONTEXT->GET_ATTRIBUTE( EXPORTING NAME = 'PDFSOURCE' IMPORTING VALUE = CONTENT ).
In the above statement CONTENT is initial. Hence dump. I have take this source from SDN Blog.
Kindly help me where i went wrong.
Thanks in advance.I

Hi,
try my solution (reading dunamic table, but you can read any data from pdf xml) described here:
Dynamic Table data cannot be Read.
Regards Jiri

Where should I install the content from FCS2

Similar Messages

Maybe you are looking for