Where should I put my extended unit test assemblies for Visual Studio 2013?

Hi, I have a question about M/S Unit test extension.
1. My purpose
I'm trying to extend Visual Studio Unit Test.
The points where I extends unit test is to output detail logs.
My development environment is as follows.
OS: Windows 8.1Pro (64bit version)
IDE: Microsoft Visual Studio Professional 2013
(Version 12.0.30723.00 Update 3)
2. Things which I'd like to know
To enable my test extension, it is required to put my test extension assemblies into designated sub folder under Visual Studio's installed folder.
The source of this information is MS developers blog below.
（http://blogs.msdn.com/b/vstsqualitytools/archive/2009/09/04/extending-the-visual-studio-unit-test-type-part-1.aspx）
Q1. It's required to put the assemblies bellow.
C:\Program Files\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies
Howerver, the guidance in the blog is for Visual Studio 2010.
In Visual Studio2013, above "PrivateAssemblies" could not be found under "\Microsoft Visual Studio 12.0\Common7\IDE" folder.
Where should I put my assemblies for my 2013. Is there any substitution for "\PrivateAssembly" folder?
Q2. Another requirement is to set Assembly information entry into the registry below.
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\EnterpriseTools\QualityTools\TestTypes\{13cdc9d9-ddb5-4fa4-a97d-d965ccfc6d4b}\TestTypeExtensions
For Visual Studio 2013, I could find almost the same node hierarchy, but
could not find the last "TestTypeExtention" node. Instead,
I could find "Extensions" node.
Should I write registry entry here? Or, should I make a new "TestTypeExtension" node and write the entry there?
Q3.Last question is more basic question.
Is there any way to kick extended test program in Visual Studio 2013's Test Explore
without registering my assemblies in the way recommended above.
I think it's much tender for developer's in debugging phase. For example,
it is very much helpful, if I could kick a unit test which uses my extended test class in the unit test extension solution.
That's all. Any information concerning this topics will be appreciated.

Hi TrailRunner-MF,
One possible reason is that you didn't view the correct folder, for example, in my windows 8.1 64 bit, it is in the path: "C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE", not the "C:\Program Files\Microsoft Visual Studio
12.0\Common7\IDE " folder.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Cannot install Selenium Components for Cross Browser Testing extension from Visual Studio 2013

Hello,
I am having some issues with installing Selenium Components for Cross Browser testing. I keep getting this error everytime. Yes, Visual Studio 2013 has been registered with a product key. However, I cannot seem to bypass this error. I tried to install
from http://visualstudiogallery.msdn.microsoft.com/11cfc881-f8c9-4f96-b303-a2780156628d and from Tools->Extensions and Updates from Visual Studio 2013. It just does not work. I have a copy of Visual Studio 2013. Yes, I already have Visual Studio
2012 Ultimate and Visual Studio 2013 Ultimate installed on my machine. What am I missing?

Hi Antwan,
Please uninstall the VS, then reinstall it.
On the other hand, this issue is in the extension, I suggest that you should post it in
Selenium components for Coded UI Cross Browser Testing site for efficient response. (Q AND A)
Thanks
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unit Testing with Microsoft Sharepoint Emulators and Fakes with Visual Studio 2013

Hi All,
I have created Test Project and now creating Test cases for Sharepoint. I found a link on MSDN which suggests using Fakes framework but it supports VS2012 and I am using Visual Studio 2013.
So how can I use it with VS2013 or is there any other way with which I can implement the Test cases with VS2013.
Please suggest.
Thanks in advance.
Himanshu Nigam

Hi HimanshuNigam,
According to your descrition, my understanding is that you want to use Fakes framework to create test case for SharePoint project in Visual Studio 2013.
If you want to test using Fakes Framework, you can use the codeplex extension to achieve it. It supports Visual Studio 2013.
Here is a detailed article for your reference:
Better Unit Testing with Microsoft Fakes
About how to include the Nuget package, you can use the package with the link below:
NuGet Package Manager for Visual Studio 2013
Installing NuGet
If you still have question about this issue, I suggest you can create a post in Visual Studio, more experts will help you and you can get more detailed information from there:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Best Regards
Zhengyu Guo
TechNet Community Support

Where Should I put the time capsule?

Where Should I put the time capsule?
I'm using a wireless modem/router provided by the internet company, and both (the TC and the router) are located next to the pc, in the living room . Using this way, I don't have signal in my bedroom. Should I get a signal amplifier?
Thanks!

It would be better to use EOP adapters (homeplug is another name) or ethernet to locate the TC closer to your room.. you can use another apple router to extend the wireless if you need to.

Where should I put trustedprincipal.conf in

Hi experts,
We have BOE XI 3.1 in our server.
We configured trusted authentication in CMC of our server machine, and created a trustedprincipal.conf in D:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 of my client machine. I created a jsp file to access bo reports.
I can not approach http://bfphp:8080/OpenDocument/opendoc/openDocument.jsp, just get alert after running the jsp file.
However, we put trustedprincipal.conf in our server machine and remove the file from my client machine, I can approach openDocument.jsp after accessing the jsp file.
Official document says trustedprincipal.conf should be put in client, but we tried it, logon fails. When I put it in server, logon succeeds.
My question is, if trustedprincipal.conf is put in server, can anyone who knows a user of BO system access to bo system via the jsp file. So how can I control authentication of client who access to BO system, and where should I put trustedprincipal.conf in?

HI,
this sounds like a general BusinessObjects Enterprise configuration topic. this forum here is for the Integration Kit for SAP.
Ingo

Where should i put the DEFAULT&SMARTBAR

Hello,
where should i put the DEFAULT&SMARTBAR ? and the main Menu ?
in order to be shown in each form..
in using Forms 6i.
Regards,
Abdetu..

Hello Gerd,
Thanks for reply..
put such things into *a reference form* what is meant by a reference form do u mean the main form?
Create a property class (PC) for your FORM-MODULE-properties,
put this PC into the reference form.
Create there an object group (OG), put the PC into the OG and the inherit the OG to your local form.
Automatically you have then the PC inherited too.i did all what u mentioned..
Bbut the problem is that the DEFAULT&SMARTBAR
can't be seen in allllllllllll my forms in the main menu inspite of i put it into the form module property ->in the intial menu property.
Regards,
Abdetu..

Where should I put WHENEVER SQLERROR CONTINUE clause?

Hi all,
this is my situation:
I have 2 compiled packages and one compiled procedure which uses the 2 packages. I want to start the procedure with sql*plus.
To do this, I wrote a script and start the script from sql*plus:
SQL> @start_proc.sqlThe start_proc.sql script looks like this:
SET SERVEROUTPUT ON
SET ECHO OFF
SET TERMOUT OFF
WHENEVER SQLERROR CONTINUE
SPOOL /home/scott/proc_out.txt
BEGIN
SCHEMA1.TEST_PR;
COMMIT;
END;
SPOOL OFFThe question is, where should i put the statement WHENEVER SQLERROR CONTINUE ?
In the current position, the procedure does not start at all. If I remove the statement completely, then I get error on the first record and the procedure does not go on with the rest of the records...

Thanks for your follow-up, Frank.
The bigger picture (imo, hence the "-ism") is still:
When it comes down to error-handling, the world suddenly gets very complicated and turns into all shades of grey, for many years.
(But actually it should be simple: quit when unexpected things happen)
The Developer has done his/her best, based on inputs
The DBA has done his/her best, based on inputs
The Architect/Designer has done his/her best, based on inputs
The Manager has done his/her best, based on inputs
The Client/CST has done his/her best, based on being client/CST
Funny thing is: whenever I mail/call CST asking for additional input, usually things make sense...
I dare say: when things go wrong, let them go wrong.
Propagate the message to another human, who probably didn't think of that/expected it to happen.

Where should i put oracle logo in my resume ...

hie everyone ...
i just received OCA certification ( 10g DBA ) and SQL Certified Expert ... now where should i put those logos in my resume ... someone mentioned that i can put them in HEADER of my resume ...
any other advice ??
thanks in advance for replying this really dumb question ...

At least you recognize it is a dumb question. That's half the battle. The other half is recognizing that no one really cares about your certifications. Congratulations. You now have the same "certification" that brain dump/cheat sheet users paid for.

Where should I put Java Servlet Spec

Dear all,
I'm in the process of installing Oracle Application Express Listener where it needs Java Servlet Spec 2.3. I got the Spec downloaded, but I don't know where should I put it. How come it's hard to find documentation about this? Please help....
Currently I'm using Linux 64.
Best regards,
Val

Oh,
haha.. I just realized that....
About System Requirements
Oracle Application Express Listener system and space requirements are as follows:
      Oracle Database (Enterprise Edition, Standard Edition or Standard Edition One) release 10.2.0.3 or higher, or Oracle Database 10g Release 2 Express Edition or higher.
      Java 6 Update 20 JDK or higher.
      Java Servlet Specification 2.3 or higher.
      Web browser requirements:
          o
            Microsoft Internet Explorer 8.0 or higher.
          o
            Mozilla Firefox 3.0 or higher.
          o
            Google Chrome 2.0 or higher.

Where should I put the sevlet

I just started to work with Tomcat and I compiled the helloWorld sevlet.
It's said from a book that the sevlet should be placed in serlver_root/webapps/ROOT/WEB-INF/classes, however there isn't a "classes" folder in my WEB-INF folder. So I put the helloWorld sevlet in the WEB-INF folder.
Then I type http://localhost:8080/servlet/helloworld in my browser, I get a message from the sever said "The requested resource (/servlet/HelloWorld) is not available".
Could anybody tell me how can solve this prolbem, where should I put the sevelt?

have ones more a look to your book - especially to information about the configuration file "web.xml" which also should be placed in the WEB-INF folder. This file defines which servlets should be found by the server and which request-URL should be mapped to this servlet.
for examples concerning the web.xml file see those already defined in your server. copy one and edit it for your needs. if you really want to understand what else might be configured using web.xml see the DTD for this file - it's pretty good documented!
hope it helps :)

Where should I put my code?

Where should I put my code, on the buttons and other items in question, or in a separate Layer, referencing the items I need...?
Background :
I'm REALLY new to Flash with Adobe. I've used SwishMax a little in the past, but nothing of recent.
At work there's a project where I'm getting to use FlashPro CS6 and I've run into an odd issue with code to move forwards, backwards, and back to the beggining on 3 different buttons.
It's in a layer called Actions, and on frame 1 - And remember... uber newbie here folks, so forgive any glaring issues in my code that most people would see quickly...
//NEXT BUTTON
NEXT_BUT.addEventListener(MouseEvent.MOUSE_DOWN, nb_mouseDownHandler);
function nb_mouseDownHandler(event:MouseEvent):void
          this.nextFrame();
//MAIN MENU BUTTON
MAINMEN.addEventListener(MouseEvent.MOUSE_DOWN, mm_mouseDownHandler);
function mm_mouseDownHandler(event:MouseEvent):void
          gotoAndStop(1, "Scene 1");
//BACK BUTTON
BACK_BUT.addEventListener(MouseEvent.MOUSE_DOWN, bb_mouseDownHandler);
function bb_mouseDownHandler(event:MouseEvent):void
     this.prevFrame();
The code for the first two work's exactly as I need, the code for the back button, initially it only appeared on from the second frame onwards, but during debugging I've popped it on all pages. On the first frame, it takes you back to a black page with nothing on it, on all others it does absolutely nothing...
Another question as I've written above, should my code be in a separate layer regerencing the items it needs to affect, or... as a colleague told me in a ridiculously over the top brimming with distaste, create layers for each item, or groups of items and place the code in there... which to me, see's odd...
Thanks once again in advance, and I'm sorry to post such a newbie question, but the internet gives mixed anwers, not specific to my situation.
Tim.

In AS3 you cannot put code on buttons and other items like you could with AS1 and AS2. Beyond that, your choices are to place code in the timeline frame(s) or in separate actionscript files. While there are a number of recommended best practices, what usually works best is whatever you are able to understand and work with at the time. While there are benefits to having all code located in one place (a frame or a file) since it makes finding it much easier, when you are creating a timeline-based design, that is not always a possible/practical approach.
Over time you will gain experience with the different approaches and can make the choice based on that experience.

Where should I put JDBC driver for MySQL

I am trying to connect MySQL with JDBC 2.0 API. I have downloaded the driver file mm.mysql-2.0.4-bin. Where should I put this driver to make it run ?
According to mysql.org, it says "Put mysql.jar in your classpath". I am confuse by classpath. Is it same as the path ? or is another system variable.
thanks for clear my doubt. ^_^

it is a different variable, but also in the same file (autoexec.bat) as path;
set CLASSPATH=%classpath%;C:\JDK1.3.0_02\bin;c:\path\mm.mysql-2.0.4-bin
Jamie

[svn:osmf:] 12425: Extending unit tests, and fixing a bug.

Revision: 12425
Revision: 12425
Author:   [email protected]
Date:     2009-12-03 04:22:59 -0800 (Thu, 03 Dec 2009)
Log Message:
Extending unit tests, and fixing a bug.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/metadata/CompositeMetadata.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestCompositeMetadata.as

[svn:osmf:] 15751: Extending unit tests.

Revision: 15751
Revision: 15751
Author:   [email protected]
Date:     2010-04-27 05:05:35 -0700 (Tue, 27 Apr 2010)
Log Message:
Extending unit tests.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/CompositeDVRTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/DynamicMediaElement.as
Added Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestParallelElementWithDVRTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestSerialElementWithDVRTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/DynamicDVRTrait.as

[svn:osmf:] 15759: Extending unit tests.

Revision: 15759
Revision: 15759
Author:   [email protected]
Date:     2010-04-27 07:46:27 -0700 (Tue, 27 Apr 2010)
Log Message:
Extending unit tests.
Modified Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/containers/TestHTMLMediaContainer.as

Where should I put my extended unit test assemblies for Visual Studio 2013?

Similar Messages

Maybe you are looking for