Where should I to start ??

Dear all,
Where should I to start learn about SOA ? I found many terms here such as ESB, BPEL, and much more. Those technologies offer different approaches and I found no basic knowledge about this or I miss something ?
May someone give me more basic about these ?
Thanks in advance,
Hery

Hi Rakes,
You can see my blog for all the fusion related links. You can go under the heading New to SOA.
Blog URL:-
http://abhishek-soablog.blogspot.com
Cheers,
Abhi...

Similar Messages

Where should I change the adapter? It doesn't work from the start.

where should I change the adapter? It doesn't work from the start. But there is no apple store in our city.

The phone does not charge when linking with adaptor. But it is OK when linking PC using USB instead. I do not know why, but I am just sure there is something wrong with the adaptor.

I want to learn editing in photoshop, from where should I start?

I want to learn editing in photoshop, from where should I start?

Jon has sent you to the right place, but I prefer a slight change to the location
http://tv.adobe.com/show/learn-photoshop-cc/
Perhaps start with Jon's page because it focuses on novice users, but the list in my link will let you chose things specific to your requirements. I always think it is good to learn the things you will use over and over, because Photoshop is definitely a Use it or Lose it kind of application.
Good luck and have fun.

Illustrator Cs5 will not open. Recently upgraded hard Drive and upgraded to Maverick OS 10.9.3. Where should I start troubleshooting?

Illustrator Cs5 will not open. Recently upgraded hard drive and upgraded to Maverick OS 10.9.3. Where should I start troubleshooting?

gj,
Unless it has worked since the upgrading, I believe you should uninstall, run the Cleaner Tool, and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

Me too!!! It says check your Downloads, but unable to find Downloads...

Where should I start learning

Hello!
I am very new to appdev. I am keen to develop in this field.
Where should I
begin!!! Please advice some beginners guide or pointer.
Reg
Dhananjey

Start with a solid foundation in HTML and CSS.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dhananjey Singh" <[email protected]> wrote in
message
news:f21re3$jhb$[email protected]..
> Hello!
>
> I am very new to appdev. I am keen to develop in this
field. Where should
> I begin!!! Please advice some beginners guide or
pointer.
> Reg
> Dhananjey
>

I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ? YoursdisillusionedbyLogic

I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogic

Hi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT

For WebLogic 5.1, where should I put my class files for my JavaBeans?

With JBuilder4, I have built an application with JSP and a few Java Beans (Those JavaBeans are instantiated in those JSP files). There are no EJBs. The package name is called 'onlinetrade'. I have tested the application on JBuilder's web server, it works pretty well.
Now I am moving this application to WegLogic 5.1. I have encountered a problem with WebLogic 5.1
and do not know where I should place my JavaBean class files --
Originally, the JSP files for my application are in package path-- ..onlinetrade\jsp
and the class files for my beans are in the package path -- ..onlinetrade\jsp\bean\*.class
Now, with WebLogic 5.1,
1) I have put my JSP files in
C:\weblogic\myserver\public_html\onlinetrade\jsp
2) I have created subdirectory and put my bean class files in
C:\weblogic\myserver\classfiles\onlinetrade\jsp\bean
When I started weblogic and the first page - login.jsp page can be up and accessed. But when I login and forward to another JSP page called 'controller.jsp', where a bean is instantiated, I got the following error
Compilation of 'C:\weblogic\myserver\classfiles\jsp_servlet\_onlinetrade\_jsp\__controller.java' failed:
C:\weblogic\myserver\classfiles\jsp_servlet\_onlinetrade\_jsp\__controller.java:210: cannot access jsp_servlet._onlinetrade._jsp.registerBean
probably occurred due to an error in /onlinetrade/jsp/controller.jsp line 53:
registerBean registerBeanInstance = new registerBean();
I know the javac is working, and a java file is created upon the JSP page, but the problem is -- the bean class files cannot be found!!!
Where should I create the package path and put my bean class file so that my JSP pages can pick them up?
Any help is greatly appreciated!
Thanks.
--Tim

I have mine in WEB-INF/classes

Can i use microsoft office on my macbook pro and from where should i download it?

can i use microsoft office on my macbook pro and from where should i download it?

I don't use Office myself so can't really offer advice. I don't recall seeing your issue before. Maybe someone who uses Office will be able to help.
As this thread is marked as solved it won't get the attention your query warrants. It would be a good idea to start your own thread discussing the problem - I'm sure someone here will offer the right advice/help.
Make sure you note what Mac your have and what version of OS X you are running.

Where should I put WHENEVER SQLERROR CONTINUE clause?

Hi all,
this is my situation:
I have 2 compiled packages and one compiled procedure which uses the 2 packages. I want to start the procedure with sql*plus.
To do this, I wrote a script and start the script from sql*plus:
SQL> @start_proc.sqlThe start_proc.sql script looks like this:
SET SERVEROUTPUT ON
SET ECHO OFF
SET TERMOUT OFF
WHENEVER SQLERROR CONTINUE
SPOOL /home/scott/proc_out.txt
BEGIN
SCHEMA1.TEST_PR;
COMMIT;
END;
SPOOL OFFThe question is, where should i put the statement WHENEVER SQLERROR CONTINUE ?
In the current position, the procedure does not start at all. If I remove the statement completely, then I get error on the first record and the procedure does not go on with the rest of the records...

Thanks for your follow-up, Frank.
The bigger picture (imo, hence the "-ism") is still:
When it comes down to error-handling, the world suddenly gets very complicated and turns into all shades of grey, for many years.
(But actually it should be simple: quit when unexpected things happen)
The Developer has done his/her best, based on inputs
The DBA has done his/her best, based on inputs
The Architect/Designer has done his/her best, based on inputs
The Manager has done his/her best, based on inputs
The Client/CST has done his/her best, based on being client/CST
Funny thing is: whenever I mail/call CST asking for additional input, usually things make sense...
I dare say: when things go wrong, let them go wrong.
Propagate the message to another human, who probably didn't think of that/expected it to happen.

Where should I put the sevlet

I just started to work with Tomcat and I compiled the helloWorld sevlet.
It's said from a book that the sevlet should be placed in serlver_root/webapps/ROOT/WEB-INF/classes, however there isn't a "classes" folder in my WEB-INF folder. So I put the helloWorld sevlet in the WEB-INF folder.
Then I type http://localhost:8080/servlet/helloworld in my browser, I get a message from the sever said "The requested resource (/servlet/HelloWorld) is not available".
Could anybody tell me how can solve this prolbem, where should I put the sevelt?

have ones more a look to your book - especially to information about the configuration file "web.xml" which also should be placed in the WEB-INF folder. This file defines which servlets should be found by the server and which request-URL should be mapped to this servlet.
for examples concerning the web.xml file see those already defined in your server. copy one and edit it for your needs. if you really want to understand what else might be configured using web.xml see the DTD for this file - it's pretty good documented!
hope it helps :)

Where should I store objects in my design

Hello guys,
I have a system that needs to store various kinds of information such as users, publications, meetings etc. I have various objects describing that sort of information but I am having a hard time choosing where to store the objects inside the design.
Quick overview of the system: I have a SystemAdmin who registers users. I have a RegisteredUser who makes publications and meetings. I have Publications and Meetings.
Where should I store the objects created by all these classes? Where should I store the "RegisteredUser" or the "Publication"? Should I use a "super" class with a bunch of collection objects or is it a bad design?
I would like to avoid using a DBMS, but if you think it would get messy otherwise, I can give it a go. Thanks

If you want to do this right, you should definitely be starting your design using a DBMS. Once that's done, you can look at EJB 3 or Spring as a persistance layer to your exterprise java app.
In today's world, it is smart to decouple your data, storage, and application layers. The buzz word being DECOUPLE

HELP! Where should I put my codecs and plug-ins!?

I do a bit of amateur editing, and I have a bunch of codecs and plug-ins. And a few months ago, I realized I MIGHT have been putting them in the wrong folder!
Macintosh HD / Library / Quicktime
So... I "copied all" and I pasted into the OTHER folder that seemed to have some codecs and plug-ins:
Macintosh HD / System / Library / Quicktime
Then, I "copied all" from THAT folder into the other folder, not overwriting duplicates.
I DO remember that there were some in BOTH folders before I started adding...
HELP! Where should they all go?
tia,
e

Um, mpeg2, Divx, etc... flip and perian are fine, but don't come anywhere NEAR allowing you to play the totality of formats out there.
However, I guess my question should have been, which ones are "Apples" and which ones aren't... I'd love to NOT have duplicates in both folders.
Is there anywhere that lists the "default" Apple Quicktime Pro codecs and plug-ins that should be in that "apple only" folder?
e

Where should I place my preloaders?

Hi all,
Would like to seek advice on where should I place the
preloaders.
I have a banner swf, menu swf, main content swf, and intro
swf. where should i load the preloader? on the main MC that will be
calling these swf? or each swf have their own preloader? that would
look rather weird.
Of should I just merged banner, menu, main content and intro
altogether? How do i do that? I am lost as to should I separate
them out or put all eggs in 1 nest. My main content will have
transitions between each sections.
since my menu is separate from the main content, how do I
point them to get the main content to change section whenever user
click on 1 sections?
I am so lost. Please advise. Thanks

Hey X, sorry I haven't responded of late, working elsewhere.
Let me address some of the questions you've had above.
1) I'm very sorry, I see that I missed that assignment when I
typed this out, within the loadFile function the correct call
should be: mcl.loadClip(src, clip);
2)the code is AS2, and yes it is legal coding. first, we're
setting up parameters for our function here, and then we pass them
this information when we call the method that we've set up, so that
we can 'feed' information to the function that then uses it to
perform it's job. the variable declarations in this case here are
called 'strict typing' (ie. src:String, file:String, ...) and it's
just a way to define variables of a particular 'type', it isn't
necessary to follow the variable names with the type declaration,
but I thought that I would include it here so that it made sense to
you and so that you could see what type of variables need to be
passed to the function. the varaibles MUST be passed to the
function in the order that they are listed.
3) yes you've got this all right :) The onLoadInit handler
fires when the loaded clip becomes instantiated on the timeline
(eg. available), previous to this point you could NOT say something
like 'clip.gotoAndPlay(10);' because the loading clip was not yet
available for the call, and it would fail. So you can use this
handler to tell the loaded clip to 'do something' if you need this
type of functionality, like say for instance that you need the
loaded swf to go to a certain 'page' depending on what button the
user pressed, this handler would be a way for you to pass that
informtion along, and tell the loaded clip to goto the correct
position, handy ;)
As to the last question in 3, I touched on that above, my bad
4) I was just talking about the name of the swf file being
called 'dummy'.
5) No, put everything in frame one, but on a different
layers. Place your preloader on the top layer, and the 'blank' MCs
(to load into) on layers below.
OK, on to your last post.
Yes, the way it's set up here the preload bar would run to
100% for each load and then start again for the next one, it also
has a text instance that tells the use what is being loaded each
time. This could all be changed, and you can certainly use you own
preloader instance, however you will need to reconstruct the method
that is handling the progress. See if you wanted ALL of the
instance your loading to equal 100% of your loader bars progress
(for the first load anyway) you can't calculate the total bytes of
all files previous to initiating the load, so you have a problem
here. One method might be to 'break up' the load and apportion the
progress indicator evenly for each item needed in the intital site
loading. what I mean by that is, if you have 4 items that are
needed to load, then each item would 'move' the progress bar by
25%, so that when 100% of the first item is loaded, the progress
bar is revealed by 25%, then the second load reveals 50%, and so
on. It will just take a little math to change the code to handle
the progressions. Now I would suggest that you NOT animate the
masking rectangle by frames, I would do this with code adjusting
the _x position of the mask by an amount that has been calculated
with the loading code. also this method will have to accomidate,
both multi-loads and singlular loads so you'll need to use another
parameter to define how the preload indicator progress is 'broken'
and into how many parts. This would end up in the math that defines
the system that controls the indicator.
OK this should be enough for you to think about for now
:)

Where should I add path of librearys before working on forms

Hi Group,
I gone through link given by you,
Thanks for your replay,
I feel happy If you give that path which starts with regedit\HKEY_LOCAL\SOFTWER----------------- Some thing I dont Know exactly.
regards,
Narendra,
[email protected]

Duplicate thread ..
Where Should I add the path of Down loaded librearys before working on form
Where Should I add the path of Down loaded librearys before working on form

Where should I to start ??

Similar Messages

Maybe you are looking for