Where the batch id changed in ECC 6.0

Hi
we had ecc4.6c and now upgraded it to ECC 6.0. but due to the change in
system batch id generates 50 digit number which is more then standard
48 digits. Can anyone help me out that how to resolve the problem? It
affects many important reports.

hi,MIchael
   ---one error
        there is E:j2ee/dbname changes not permitted below the parameter of j2ee/dbname.
        solution:
                  the value of j2ee/dbname was BS2.   just now, i deleted the value of j2ee/dbname.
                 the error message does not come out,now.
   ---three warns
       j2ee/scs/host
       j2ee/scs/system
      j2ee/ms/port
    solution:
              there is not the scs in the system. but there is the ms in system.
              why they are specified , i dont konw.
              if those parameter doesn't exist, would i be going to delete those parameter.
    thanks and regards.
    chu

Similar Messages

Relinking where the filename has changed but tape name is the same, can it be done?

Should it be possible to relink to media based on matching tape name?
So i have X files in a folder, each has a unique tape name. Then some of those files are regenerated with different filenames but the tape name remains the same. I was naively assuming that the relocate dialogue, if you had tape name checked and nothing else would then match the files name for name and find them automatically.
That doesn't seem to be the case.
So am i wrong? Or is there a way of relinking several hundred files where the filename may change - how can i get premiere to relink to a file other than exact filename match?
thanks
Paul

Hi Fuzzy!
I did look at that but it's a large extra step that wouldn't be ideal. The idea is that i need a timeline just changing as files are updated in the background, i don't want to have an extra workflow step in there. I can probably arrange it so the filenames don't change (not ideal) but the key is that the linking dialogue appears to suggest that i should be able to relink using tape name but it just doesn't appear to work.
If i relink one of the files then i'd expect PPro to go off any find any other missing ones based on the tape name, but nope...
thanks anyway
cheers
Paul

How to reflect the Master data changes from ECC to MDM

Hi Experts,
We need to reflect the master data changes of company code and cost center groups from ECC to MDM.
what methods available and which would be best in performance.
kindly let me know if you need further information for better undrstanding.
Thanks in anticipation
looking forward to hear from you all,
with regards,
Chandhan.S

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

Find terminal from where the record is changed

Dear Experts,
One of the user has increased the Purchae Order value and payment has been made to the party. Now our client wants to find out the terminal from where value has been changed.
The problem is that security audit log(SM19, SM20) has not been configured here and this user id was used by 4 user.
The value has been changed on 26 of august.
Please help me in this regard because it is very critical thing
Rupesh Kumar singh
Basis consultant

Hi Rupesh,
Try accessing these tables via SE16 - enter the document number.
CDHDR
and
CDPOS
This wont give you the terminal number but it will certainly point out the user id used to make the changes at that particular time.
I did try to link the tables by the tables used by STAD but then gave it up in between. If any one could carry it further, that would be a great help.
Regards,
Pranay

Alert in crm when the order is changed in ecc

HI All,
When an ECC order is changed/cancelled then an alert should be generated in the alert inbox of the crm user. Please suggest if such a scenario is possible. We dont have XI in place.
In such scenarios can we have the alert category defined in the ECC system and the alert triggered from CRM system by pointing the rfc connection in SALRT1 to crm system.
Please suggest.

Hey
Please open this question in ECC forum since this is not part of XI.
To answer your question,you should be able to achieve this by configuring CCMS on ECC or on Solution manager.
Thanks
Aamir

Batch date change corrupts the dates

I need some help with the batch name change in iPhoto. I recently tried to change some dates of an entire event to 12/25/2008. Once the batch change was done, the dates all appear as a corrupted year of 12/09/-2007 with the line in them. They then disappear completely from the event and can only be found on the photo section.
I have tried the adjust date and time and I have tried rebuilding the library and transferring photos to new libraries, but get the same error.
thanks,

Close iPhoto, delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and see if that helps.
Happy New Year
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Finding out the Batch which is present during creation of delivery

Dear All,
I need to keep track of changes in batch during delivery. I can find out the change using change documents ( tables CDHDR and CDPOS ). The problem is it keeps track of batches only after the document is saved . If during creation the batch is changed , we are not able to see the initial batch , all the other changes can be tracked using change documents. How can we find out the batches during creation of delivery ( Is there any table which stores the batch no during delivery.
Regards
D. Mallick

This does not looks possible...Changes can only be tracked once they are saved.

How BBPUPDVD determines vendor master change in ECC?

Hi Experts,
How is the vendor master change in ECC captured and what is the strategy/check that the BBPUPDVD transaction OR vendor update report uses/does in ECC to pick up the updated vendor with qualified fields for transmission?
Qualified fields -> Purchasing block, curr change, comm method change, etc.
For e.g, if a vendor is blocked for a P.Org today and if we either execute BBPUPDVD OR vendor update job, so how does it determine the change in vendor master in ECC?
Thanks!
Regards,
Karthik

Hello Karthik,
just to complete what wrote Konstantin, those change documents are determined in ECC using CHANGEDOCUMENT_READ function modul inside BBP_SCAN_VD function modul which is called by RFC from SRM (report BBP_VENDOR_SYNC).
Regards.
Laurent.

Batch title change in photo version 1

The new "Photo" has changed the user interface completely. Is there a way to to the "batch title change" for a group of photos? There are instructions for how to do for one, but I'm hoping that this has not been lost. I'm using version 1.
Is there any way to remove the conformation that is now required each and every time you want to delete a photo or group of photos?
Thanks,
DMW

Batch changing is not yet supported in Photos for Mac.
You could try to do it using AppleScript and Automator.
I posted a few scripts on the Photos User Tips page:
See: Photos for Mac
Batch Changes in Photos for Mac: Change the titles to a Given String
Photos for Mac: Batch Change the Date and Time to a Fixed Date
Photos for Mac: Batch Change the Descriptions

Batch no change

hi all,
During transfer posting in which all the cases does the Batch Number change .
thanks

The batch number will remain the same for trnsafer postings as you are moving a btach from one positon to the other.
Unless you are using any user exit for the batch numbers based on the location/ plant
Thanks & Regards
Kishore

How to update a large (over 4 million item) List(Of Byte) quickly by altering indexes contained in a Dictionary(Of Integer, Byte) where the Dictionaries keys are the indexes in the List(Of Byte) that need to be changed to the values for those indexes?

   I'm having some difficulty with transferring images from a UDP Client to a UDP Server. The issue is receiving the bytes necessary to update an original image sent from the Client to the Server and updating the Servers List(Of Byte) with the
new bytes replacing bytes in that list. This is a simplex connection where the Sever receives and the Client sends to utilize the least amount of bandwidth for a "Remote Desktop" style application where the Server side needs image updates of whatever
occurs on the Client desktop.
   So far I can tranfer images with no issue. The images can be be any image type (.Bmp, .Gif, .JPeg, .Png, etc). I was working with sending .JPeg's as they appear to be the smallest size image when a Bitmap is saved to a memory stream as type
.JPeg. And then I am using GZip to compress that byte array again so it is much smaller. However on a loopback on my NIC the speed for sending a full size screen capture is not very fast as the Server updates fairly slowly unless the Clients screen capture
Bitmap is reduced in size to about 1/3'd of the original size. Then about 12000 bytes or less are sent for each update.
   Due to .JPeg compression I suppose there is no way to get the difference in bytes between two .JPegs and only send those when something occurs on the desktop that alters the desktop screen capture image. Therefore I went to using .Bmp's as each
.Bmp contains the same number of bytes in its array regardless of the image alterations on the desktop. So I suppose the difference in bytes from a second screen capture and an inital screen capture are what is different in the second image from the initial
image.
   What I have done so far is save an initial Bitmap of a screen capture using a memory stream and saving as type .Bmp which takes less than 93 milliseconds for 4196406 bytes. Compressing that takes less than 118 milliseconds to 197325 bytes for
the current windows on the desktop. When that is done PictureBox1 is updated from nothing to the captured image as the PictureBox's background image with image layout zoom and the PictureBox sized at 1/2 my screens width and 1/2 my screens height.
   Then I save a new Bitmap the same way which now contains different image information as the PictureBox is now displaying an image so its back color is no longer displayed (solid color Aqua) and the cursor has moved to a different location. The
second Bitmap is also 4196406 in bytes and compressed it was 315473 bytes in size.
   I also just found code from this link Converting a Bitmap to a Byte Array (and Byte Array to Bitmap) which gets a byte array
directly from a Bitmap and the size of that is 3148800 for whatever is full screen captured on my laptop. So I should be able to work with smaller byte arrays at some point.
   The issue I'm having is that once the Client sends an image of the desktop to the Server I only want to update the server with any differences occuring on the Clients desktop. So what I have done is compare the first screen captures bytes (stored
in a List(Of Byte)) to the second screen captures bytes (stored in a List(Of Byte)) by using a For/Next for 0 to 4196405 where if a byte in the first screen captures List is not equal to a byte in the second screen captures List I add the index and byte of
the second screen captures list to a Dictionary(Of Integer, Byte). The Dictionary then only contains the indexes and bytes that are different between the first screen capture and second screen capture. This takes about 125 milliseconds which I think is pretty
fast for 4196406 byte comparison using a For/Next and adding all the different bytes and indexes for each byte to a Dictionary.
    The difference in Bytes between the inital screen capture and the second screen capture is 242587 as an example which changes of course. For that amount of bytes the Dictionary contains 242587 integers as indexes and 242587 bytes as different
bytes totaling 485174 bytes for both arrays (keys, values). Compressed the indexes go from 242587 to 43489 bytes and the values go from 242587 to 34982 bytes. Which means I will have to send 78, 481 bytes from the Client to the Server to update the display
on the server. Quite smaller than the original 4196406 bytes of the second Bitmap saved to type .Bmp or the compressed size of that array which was 315473 bytes. Plus a few bytes I add as overhead so the server knows when an image array ends and how many packets
were sent for the array so it can discard complete arrays if necessary since UDP is lossfull although probably not so much in current networks like it may originally have been when the internet started.
    In reality the data from the Client to the Server will mostly be the cursor as it moves and updating the Server image with only a few hundred bytes I would imagine at a time. Or when the cursor selects a Button for example and the Buttons
color changes causing those differences in the original screen capture.
   But the problem is if I send the Dictionaries Indexes and Bytes to the Server then I need to update the original Bitmap List(Of Byte) on the server by removing the Bytes in the received informations Index locations array from the Servers Bitmap
List(Of Byte) and replacing those Bytes with the Bytes in the received informations Byte array. This takes so long using a For/Next for however many indexes are in the received informations Index array to update the Bitmap List(Of Byte) on the server using
"Bmp1Bytes.RemoveAt(Index As Integer)" followed by "Bmp1Bytes.Insert(Index As Integer, Item As Byte)" in the For/Next.
    I've tried various For/Next statements including using a new List(Of Byte) with If statements so If the the integer for the For/Next ='s the Key in a Dictionary(Of Integer, Byte) using a Counter to provide the Dictionaries Key value then
the Dictionaries byte value will be added to the List(Of Byte) and the counter will increas by one Else the List(Of Byte) adds the original "Bmp1Bytes" byte at that index to the new List(Of Byte). This takes forever also.
   I also tried the same For/Next adding to a new Dictionary(Of Integer, Byte) but that takes forever too.
   I think I could use RemoveRange and AddRange to speed things up. But I don't know how to retrieve a contiguous range of indexes in the received indexes that need to be updated in the servers "Bmp1Bytes" List(Of Byte) from the received
array of indexes and bytes which are in a Dictionary(Of Integer, Byte). But I believe this would even be slower than some realistic method for replacing all Bytes in a List(Of Byte) when I have the indexes that need to be replaced and the bytes to replace
them with.
   Even if I just used AddRange on a new List(Of Byte) to add ranges of bytes from the original "Bmp1Bytes" and the changes from the Dictionary(Of Integer, Byte) I think this would be rather slow. Although I don't know how to do that
by getting contiguous ranges of indexes from the Dictionaries keys.
   So I was wondering if there is some method perhaps using Linq or IEnumerable which I've been unable to figure anything out which could do this.
   I do have some copy and pasted code which I don't understand how it works that I am using which I would guess could be altered for doing something like this but I can't find information that provides how the code works. Or even if I did
maybe I can't understand it. Like the code below which is extremely fast.
   Dim strArray() As String = Array.ConvertAll(Of Integer, String)(BmpComparisonDict.Keys.ToArray, Function(x) x.ToString())
La vida loca

Monkeyboy,
That was quite a bit to read, but still a bit unclear. Could you put a specific list of goals/questions, asked in the smallest possible form?
It seems like either you're making a program that monitors activity on your computer, or you're writing some kind of remote pc app.
When you do get your bytes from using lockbits, keep in mind all the files header info would be lost. I think retaining the header info is worth the extra bytes.
The other, thing: I'm not sure if you're taking 32bpp screen shots, but also keep in mind that the "whole desktop" is the final destination for blended graphics, if that makes sense. What I mean is that there is no need to capture an "alpha"
channel for a desktop screenshot, as alpha would always be 255, this could save you 1 byte per pixel captured... Theres nothing "behind" the desktop, therefore no alpha, and every window shown above the desktop is already blended. I suggest using
24Bpp for a full screen capture.
Your X,Y information for the mouse could be stored as UINT16, this would save you a measly 2 bytes per location update/save.
When you update your byte arrays, maybe you can turn the array into a stream and write to whatever index, however many bytes, that should prevent a "Shift" of bytes, and instead overwrite any bytes that "get in the way".
ex
Dim example As String = "This is an example."
Dim insertString As String = "was"
Dim insertBytes As Byte() = System.Text.Encoding.ASCII.GetBytes(insertString)
Dim bytes As Byte() = System.Text.Encoding.ASCII.GetBytes(example)
Dim modifiedBytes As Byte() = {}
Using ms As New System.IO.MemoryStream(bytes)
ms.Position = 5
ms.Write(insertBytes, 0, 3)
modifiedBytes = ms.ToArray
End Using
Dim newString As String = System.Text.Encoding.ASCII.GetString(modifiedBytes)
'Notice how below there isn't the word "is" anymore, and that there isn't a
'space.
'This demonstrates that you overwrite existing data, versus shifting everything to
'the right.
'Returns: This wasan example.
MsgBox(newString)
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.
Well it's too much to read. I was really tired when I wrote it. Even the below is too much to read but perhaps gets the point across of what I would like to do which I think
Joel Engineer may have answered but I'm not sure. As I'm still too tired to understand that yet and research what he said in order to figure it out yet.
But maybe the code below can provide the concept of the operation with the comments in it. But seeing as how I'm still tired it may be confused.
Option Strict On
Imports System.Windows.Forms
Imports System.IO
Imports System.IO.Compression
Imports System.Drawing.Imaging
Imports System.Runtime.InteropServices
Public Class Form1
Dim Bmp1Bytes As New List(Of Byte)
Dim Bmp1BytesCompressed As New List(Of Byte)
Dim Bmp2Bytes As New List(Of Byte)
Dim BmpComparisonDict As New Dictionary(Of Integer, Byte)
Dim BmpDifferenceIndexesCompressed As New List(Of Byte)
Dim BmpDifferenceBytesCompressed As New List(Of Byte)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
SomeSub()
End Sub
Private Sub SomeSub()
' Pretend this code is in UDP Client app. A screen capture is performed of the desktop. Takes about 90 milliseconds.
Bmp1Bytes.Clear()
Using BMP1 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP1)
g1.CopyFromScreen(0, 0, 0, 0, BMP1.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP1.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp1Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
Bmp1BytesCompressed.AddRange(Compress(Bmp1Bytes.ToArray))
' UDP Client app sends Bmp1BytesCompressed.ToArray to UDP Server which is the entire image of the desktop that the UDP
' Client is on. This image takes awhile to send since compressed it is about 177000 bytes from over 4000000 bytes.
' I will be using different code just to get the bytes from the actual Bitmap in the future. That is not important for now.
' Pretend the UDP Server has received the bytes, decompressed the array received into a List(Of Byte) and is displaying
' the image of the UDP Clients desktop in a PictureBox.
' Now the image on the UDP Clients desktop changes due to the mouse cursor moving as an example. Therefore a new Bitmap
' is created from a screen capture. This takes about 90 milliseconds.
Bmp2Bytes.Clear()
Using BMP2 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP2)
g1.CopyFromScreen(0, 0, 0, 0, BMP2.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP2.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp2Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
' Now I have the original images bytes in Bmp1Bytes and the new images bytes in Bmp2Bytes on the UDP Client. But I don't
' want to send all of the bytes in Bmp2Bytes to the UDP Server. Just the indexes of and the bytes that are different in
' Bmp2Bytes from Bmp1Bytes.
' This takes less than 100 milliseconds for what I've tested so far where over 500000 bytes in Bmp2Bytes are different
' than the bytes in Bmp1Bytes. Usually that amount would be much less. But during testing I was displaying the image
' from Bmp1 bytes in a PictureBox so a large amount of data would change between the first screen shot, the PictureBox
' then displaying an image on the same PC and then the second screen shot.
BmpComparisonDict.Clear()
For i = 0 To Bmp1Bytes.Count - 1
If Bmp1Bytes(i) <> Bmp2Bytes(i) Then
BmpComparisonDict.Add(i, Bmp2Bytes(i))
End If
Next
' So now I have all the difference bytes and their indexes from Bmp2Bytes in the BmpComparisonDict. So I compress
' the indexes into on List and the Bytes into another List.
BmpDifferenceIndexesCompressed.Clear()
BmpDifferenceBytesCompressed.Clear()
BmpDifferenceIndexesCompressed.AddRange(Compress(BmpComparisonDict.Keys.SelectMany(Function(d) BitConverter.GetBytes(d)).ToArray()))
BmpDifferenceBytesCompressed.AddRange(Compress(BmpComparisonDict.Values.ToArray))
' Now pretend the UDP Client has sent both those arrays to the UDP Server which has added both decompressed arrays
' to a Dictionary(Of Integer, Byte). And the server has the original image decompressed bytes received in a List
' called Bmp1Bytes also.
' This is where I am stuck. The UDP Server has the Dictionary. That part was fast. However there is no
' fast method I have found for creating a new List(Of Byte) where bytes in the originally received List(Of Byte) that
' do not have to be altered are placed into a new List(Of Byte) except for the indexes listed in the
' Dictionary(Of Integer, Byte) that need to be placed into the appropriate index locations of the new List(Of Byte).
' The below example for doing so is exceptionally slow. Pretend UpdateDictionary has all of the decompressed indexes
' and bytes received by the UDP Server for the update contained within it.
Dim UpdateDictionary As New Dictionary(Of Integer, Byte)
Dim UpdatedBytes As New List(Of Byte)
Dim Counter As Integer = 0
For i = 0 To Bmp1Bytes.Count - 1
If i = UpdateDictionary.Keys(Counter) Then ' Provides the index contained in the Keys for the Dictionary
UpdatedBytes.Add(UpdateDictionary.Values(Counter))
Counter += 1
If Counter > UpdateDictionary.Count - 1 Then Counter = 0
Else
UpdatedBytes.Add(Bmp1Bytes(i))
End If
Next
' So what I'm trying to do is find an extremely fast method for performing something similar to what the
' above operation performs.
End Sub
Private Function Compress(BytesToCompress() As Byte) As List(Of Byte)
Dim BytesCompressed As New List(Of Byte)
Using compressedStream = New MemoryStream()
Using zipStream = New GZipStream(compressedStream, CompressionMode.Compress)
zipStream.Write(BytesToCompress, 0, BytesToCompress.Count)
zipStream.Close()
BytesCompressed.AddRange(compressedStream.ToArray)
End Using
End Using
Return BytesCompressed
End Function
Private Function Decompress(BytesToDecompress() As Byte) As List(Of Byte)
Dim BytesDecompressed As New List(Of Byte)
Using DecompressedStream = New MemoryStream()
Using zipStream = New GZipStream(DecompressedStream, CompressionMode.Decompress)
zipStream.Write(BytesToDecompress, 0, BytesToDecompress.Count)
zipStream.Close()
BytesDecompressed.AddRange(DecompressedStream.ToArray)
End Using
End Using
Return BytesDecompressed
End Function
End Class
La vida loca

How can I add/change art work to albums where the art work isn't available at iTunes?

How can I add/change art work to albums where the art work isn't available at iTunes?

Go to google and search for the artwork. When you find it, save it to your computer. Right click the album and select get info. Drag the image you saved to the empty box for album art.

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

Is it possible to create a view where table in the From clause changes name

is it possible to create a view from a from a table like this
create view my_view as select id, col1, col2, result from <<my_latest_cacahe_table>>;
the table in the from clause changes the name .
I have another table which indicates the the latest name of my cache tables. Always there are two records there. The latest one and previous one.
select * from cache_table_def
table_name cache_table_name refresh_date
my_table cache_table245 1/23/2012
my_table cache_table235 1/22/2012
create table cache_table_def (table_name varchar2(25), cache_table_name varchar2(25), refresh_date date);
insert into cache_table_def values( 'my_table','cache_table245','23-jan-2012');
insert into cache_table_def values ( 'my_table','cache_table546','22-jan-2012');
create table cache_table245 (id number, col1 varchar2(50), col2 varchar2(20), result number);
insert into cache_table245 values(1, 'test123', 'test345',12.12);
insert into cache_table245 values (2, 'test223', 'test245',112.12);
create table cache_table235 (id number, col1 varchar2(50), col2 varchar2(20), result number);
insert into cache_table235 values (1, 'test123', 'test345',92.12);
insert into cache_table235 values (2, 'test223', 'test245',222.12);
what I need to do is find the latest cache_table name for my_table and use that in my view defintion
When user select from the the view it always reurns the data from the latest cache_table
is it possible to do something like this in oracle 11g?
I have no control on the cache tables names. that is why I need to use the latest name from the table.
Any ideas really appreciated.

I've worked up an example that does what you ask. It uses the SCOTT schema EMP table. Make two copies of the EMP table, EMP1 and EMP2. I deleted dept 20 from emp1 and deleted dept 30 from emp2 so I could see that the result set really came from a different table.
-- create a context to hold an environment variable - this will be the table name we want the view to query from
create or replace context VIEW_CTX using SET_VIEW_FLAG;
-- create the procedure specified for the context
- we will pass in the name of the table to query from
create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
as
begin
dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
end;
-- these are the three queries - one for each table - none of them will return data until you set the context variable.
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
-- this is how you set the context variable depending on the table you want the view to query
exec set_view_flag( p_table_name => 'EMP' );
exec set_view_flag( p_table_name => 'EMP1' );
exec set_view_flag( p_table_name => 'EMP2');
-- this will show you the current value of the context variable
SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
-- this is the view definition - it does a UNION ALL of the three queries but only one will actually return data
CREATE VIEW THREE_TABLE_EMP_VIEW AS
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
-- first time - no data since context variable hasn't been set yet
SELECT * FROM THREE_TABLE_EMP_VIEW
-- get data from the EMP table
exec set_view_flag( p_table_name => 'EMP' );
SELECT * FROM THREE_TABLE_EMP_VIEW
-- get data from the EMP2 table
exec set_view_flag( p_table_name => 'EMP2');
SELECT * FROM THREE_TABLE_EMP_VIEW
For your use case you just have to call the context procedure whenever you want to switch tables. You can union all as many queries as you want and can even put WHERE clause conditions based on other filtering criteria if you want. I have used this approach with report views so that one view can be used to roll up report data different ways or for different regions, report periods (weekly, quarterly, etc). I usually use this in a stored procedure that returns a REF CURSOR to the client. The client requests a weekly report and provides a date, the procedure calculates the START/END date based on the one date provided and sets context variables that the view uses in the WHERE clause for filtering.
For reporting it works great!

I inadvertedly changed a setting where the top of my screen no longer shows the apple logo in the top left or the clock and wifi status and strength on the top of the screen, how can I get it to show both of these things again like it used to?

I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen. When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again. So I was wondering how can I get it to revert back to the way it used to be? I hope this isnt confusing.

I tried the zoom thing but it still didnt resolve my issue Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar. Anyone else have any ideas of what I did to mess this up?

Where the batch id changed in ECC 6.0

Similar Messages

Maybe you are looking for