Where the certification or a course will be defined

Hi all,
Can any one tell where the classes (or) Courses and certifications will be defined. whether the course or certification is restiricted to one operating unit.
where we can define a course or certification.
Please help me,
Thank you.

Hi
You define the Courses, Offerings and Classes for certifications in the OLM catalogue just like any others. Once they have been defined, you can then define the cerrification. Part of the certification process is to choose the course or courses that make up the components of the certification.
If you cannot see the courses you want, it may be because the Course does not have any valid Offerings or Classes
The view that OLM uses to show courses available to the certification includes looking for 'valid' courses so there must be some classes defined which are possible to enrol in.
Hope that helps explain it.
Regards
Tim

Similar Messages

HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

I have a macpro tower 1,1 which I want to give to a friend in France where the current is 220. Will this US purchases computer work on 220?

I have a macpro tower 1,1 which I want to give to a friend in France where the current is 220. Will it work on 200?

Right idea, but wrong name for it.
Older power supplies took the raw AC as it came out of the wall and ran that through a transformer -- but the transformer had to be really big and heavy. Then pull Voltages off that and rectify and filter them for the various output Volatges.
A switching power supply is one that uses a very high power transistor to "chop up" or "switch" the input power into a lower Voltage AC wave inside, then steps that up or down through a more modest transformer and rectify and filter it to provide the outputs. It weighs quite a bit less, and is more efficient as well.

Where the create or replace packagebody will be stored?

Friends,
can anybody clear this doubt pls?...
writing create or replace packagebody in the sql*plus will be stored in the database.
but if i write the same create or replace packagebody in the forms where it will be stored?
will it store in the database or in temp memory?
thanks

Like Francois said...
When you create a program unit in forms, it will be stored in the form module.
It's not available on the database.
When you call a package in forms, it will first look in the form.
If the package doesn't exist, it will check the libraries attached to the form.
If the package doesn't exist in a library, it will check the database.
I hope this helps...

Where the requirement routinte 362 in TAXINN is defined?

In column, Alternative Base Value formula of TAXINN procedure, 362 requirement routine is given?
What is its use? and where it is defined?

hi
Go to transaction code VOFM.
In the menu bar, go to requirements - pricing.
Here you create a routine number and define a routine according to your requirement.
The same routine number is assiged back in the pricing procedure. The same principle works whether it be requirement or calculation type or alternative condition base value.
http://www.saptechsolutions.com/pdf/VOFMFormulaRoutines.pdf
http://www.saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
Regards

I have a website where the masthead and other title fonts are defined in the CSS but Firefox shows the font as Times Roman. The website is correctly displayed in IE9, IE8, chrome and opera.

The fonts, which have been described in the CSS file as:
#content h1{background-color:transparent;border:0px;font-family:"Copperplate Gothic bold";font-size:1.75em;font-weight:normal;margin:0px 0px 10px 0px;padding:0px;}
Display as Times Roman (I think).
If i substitute a single word font name instead of : "Copperplate Gothic bold" such as: "Arial" it works ok.

Do you see that font listed as one of the default fonts?
* Tools > Options > Content : Fonts & Colors : Default font
Do you see that font if you select it as the default?
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Tables where the survey questionnaire and response information gets stored

Dear experts,
Could you please help me with the information on the tables where the survey and survey responses will get stored in the system?
Thanks and regards,
Ranjan

Hi,
These are all talbes in SRM relates to Survey.
ROST_LANG_QSTN        Language Selection for Question
ROST_PCAT_QSTN        Assign Product Category and Questionnaire to Lan
ROST_SEL_PRODCAT    Product Categories for Regis
ROST_WS_QSTN            Web Survey Questionnaire
ROS_BP_PC_SURVEY    Assign Vendor, Product Category, Survey
CRMD_IC_SCRATTR        Script/Survey attributes (Interactive Script Editor)
ROST_WS_QSTN            Web Survey Questionnaire
ROS_BP_PC_SURVEY    Assign Vendor, Product Category, Survey
TUWS_SURVEY              Survey
TUWS_SURVEY_LOG     Survey Log
TUWS_SURVEY_PUB      Survey Publishing
TUWS_TAROBJ               Survey: Recipients
TUWS_TAROBJ_ATTR    Survey: Recipient Attributes
Regards,
yaniVy
reward if helps

Installing AC10.0 plug-in where the AC5.3 RTA exist

Hi All,
Installing AC10.0 plug-in where the AC5.3 RTA exist will not work anymore.
Is this still the case with SP04? or has SP04 resolved this?
Thanks

Hi Odwa,
SP4 is planned to fix that, but the AC5.3 System needs to be on SP15 to keep working.
Best,
Frank

I-phone 4 camera roll will not save pictures sent to me via text messages, it just gives me a message stating it is updating my library, then takes me back to the camera roll where the picture is no where to be found (other than in my original text messag

I-phone 4 camera roll will not save pictures sent to me via text messages, it just gives me a message stating it is updating my library, then takes me back to the camera roll where the picture is no where to be found (other than in my original text message).

RESOLVED!!! I logged on to my Straight Talk online account, and did a Tech Chat. They immediately gave me a direct phone number and a Reference PIN number and asked me to contact their iPhone specialty support. I called (of course the gentleman's accent was very difficult for me to understand, but managed with asking continually for clarity). He walked me through several tests, setting changes and had me get on my wifi to obtain the latest APN settings. None of his efforts worked ad it was obviously NOT my Straight Talk iPhone 5, 64GB CDMA (no SIM) - it was something with their setting on their end on my account. I was placed on hold a few times and he would come back on to have me try to get on Safari and even Google... after the 3rd on-hold, he returned and asked me to try to use my data again without the wifi turned on and BINGO it worked... I still do not have my wifi turned on and I'm still receiving texts from YESTERDAY too while I was away from wifi service. IF you come across this issue - please call Straight Talk and/or log on to your Straight Talk online account and talk to an online customer service representative and get their direct line phone number for iPhone support and have your Reference PIN number available. Good Luck

I am unable to install the latest version of Muse 2014. When I open Muse it comes up with a 'new version is available' and when I click on 'install now' it takes me to the adobe muse website where I click on the 'Download' button. It will then come up wit

When I open Muse it comes up with a 'new version is available' and when I click on 'install now' it takes me to the adobe muse website where I click on the 'Download' button. It will then come up with 'Muse is downloading now'. It will then take me back to the Muse app again with the same 'install now' message. The new version has not installed, could some one please let me know the reason why it isn't installing.

Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

Hi all
I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
Stay Hungry, Stay Foolish
Solved!
Go to Solution.

Steve Chandler wrote:
I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
Kudos for being sneaky.
I like these creative work-arounds!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where i am not a network administrator. All helps for this issue instruct turning off the router/other stuff that i cant access.Suggestions?

Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where I am not a network administrator and do not have privliges to reset passwords and turn the routers on and off. Any other suggestions for re-connecting? I have never had a problem before and can still connect to other networks i am a part of...

Try Resetting your iPad: Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.

I have just shifted to India where the voltage is 220V vs 110V used in US. will the apple tv work directly or do i need a step down convertor to use it?- tks sahil

have just shifted to India where the voltage is 220V vs 110V used in US. will the apple tv work directly or do i need a step down convertor to use it?- tks sahil

You only need a plug adaptor as long as the voltage is between 100 and 240 volts.
(123957)

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

If a server supports resuming downloads then the download should continue where it left off.<br />
You can test that by simple starting a large download and wait a minute or so before pausing it.<br />
Then you can close and restart Firefox and see if resuming works.
You can set the pref browser.download.manager.quitBehavior to 2 on the about:config page.<br />
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior

So, I got an iPod from a friend because the screen was broken, he tried to fix it and he bent one of the prongs on where the LCD for the screen goes on the front of the mother board. I can still click it in, will it still work if I buy a new screen?

Well, my friend gave me his iPod 4G Because the screens LCD was broken and there was a black dot in the screen and it didn't work, he didn't want it anymore because he thinks he broke it because where the LCD connects to the front of the motherboard one of the prongs is bent but I can still click the LCD in if I get a new screen will it still work?

Maybe.

Where the certification or a course will be defined

Similar Messages

Maybe you are looking for