Where the Report info is stored.
Can anyone tell me where the reports logs are stored. I am asking for those which are displayed in showjobs comand.
I am not talking about those which are stored in log folder.
Hello,
The information displayed by the showjobs command is stored in memory and in the "persist file"
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1007034
Regards
Similar Messages
-
Table where the Delivery date is stored in Confirmation tab on Me23n
Hello ABAB Gurus,
Can anyone give me the table name where the Delivery date is stored in Confirmation tab in Item in ME23n.
If anyone is aware of it then please let me know .
SagarHi,
Check the table EKES and field name is EINDT..
Thanks,
Naren -
Changing where the sent messages are stored
Hi, I was wondering is there any way you can change where the sent messages are stored. I have switched from a few programs.. and there is a 'sent' folder and ' sent messages' folder on my folder list in addition to that of what mail is putting them in. I just want one folder.
Sounds like you are accessing an IMAP type account.
If so, is this the only email account and account type you are accessing with the Mail.app? -
How to find where the screen field is stored in table
Hi all,
How to find where the screen field is stored in the table .
for some transactions if i press F1 on the field and after checking for the technical help.
I can only find the struture for the screen field, but whereas i need table name for it.
Can anybody help me how to find the table name where the field is stored.
Regards,
MadhaviHi,
Just hitting a F1 on screen field and getting structure name will not help in getting table name.
First you need to know the flow of data in the reqd module, which will help you know all the tables in that module with there most of the fields with the data flow, now you need to work on your own to figure out that in which actual tables that value is stored.
Hope this helps you.
Regards,
Tarun -
Tables where the XI Data is stored
Dear all,
Can you let me know all the tables in XI in which the data is stored.
Like where the asyncronous messages are stored(which table and what is the abap program name which gets executed to store the message id's etc in the table).
Pl list out all the tables,programs related to XI.
Also pls let me know where IDOC,Proxy,RFC related tables programs.
my mailid is srinivas5780@gmailcomHi,
Please go through the below weblog:
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
For IDOC:
tables are EDIDC control record table and EDIDD-data record table.
Thnx
Chirag -
Where the session id is stored in server/JVM in java
hi all,
please tell me where the session id is stored in server or JVM in java.
regards
Mohan kumarWhich session ID are your taking about?
Are you doing J2EE development?
-Alexis -
Anybody know where the default templates are stored?
I'd like to access the location where the default templates are stored. I've checked in: "Macintosh HD/Library/Application Support/Logic" but did not find anything.
I see that user templates are in: "Macintosh HD/Users/PROFILE/Library/Application Support/Logic/Project Templates"
Thanks in advance!
Rydahalienimplant wrote:
The assigned solution to this problem is false. The answer is that they are stored here:
/Users/[username]/Music/Audio Music Apps/Project Templates
That is not correct.
User Project templates are stored in the location you stated but the Default Project templates, which is what the OP asked about, are stored within the app as Blueberry stated....
Note the path I highlighted...... -
Where the Forum informations are stored?
Hi all,
i need to know, where the forum contents are stored in the KM?
regards,
Kathiresan RHi,
Did you press the Advanced mode when you are under repository manager?
If the forums repository is not present, then you did not install Forums Application.
Check this:
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9ca6594e903ef4e10000000a1553f7/frameset.htm
Regards,
Praveen Gudapati -
Where the posted threads are stored
Hi All,
Where the posted threads are stored. In which repository i is storing.
Regards
Krishnamurthy KHi,
You can read the documentation about [Content Management Configuration|http://help.sap.com/saphelp_nw70/helpdata/EN/69/d96b7aa84611d5993600508b6b8b11/frameset.htm] , where you can find a lot of information about [Repository Managers |http://help.sap.com/saphelp_nw70/helpdata/EN/69/d96b7da84611d5993600508b6b8b11/frameset.htm] .
Repositories are used for storing and/or retrieving content and metadata.
The KM standard configuration uses several internal repositories that are controlled by CM. They are used for storing and staging various content and metadata and for navigating in this data. These repositories are preconfigured and preactivated in the KM standard configuration. You do not normally need to modify their configuration.
In addition to the aforementioned internal repositories, you can integrate additional external repositories into CM, such as a WebDAV or file system repository. You can establish a connection to these repositories by configuring appropriate repository managers.
Regards,
Lubi
*Hope it will be helpful for you. -
Table where the VAT value is stored
Hello!
Could any one tell me where the VAT value is stored for the particular matnr. I am searching the table KONH- KSCHL where the value is stored at JVAT. but there was 40% of the matnr only having JVAT value.I am taking the price from KONH.So from where i have to take the VAT value.
-M.SubaFor excise details you will have to use J_1iexchdr, J_1iexcdtl,
For Tax related data use KONV
Thanks & Regards
JP -
In an IPI system, I have several IPs connected their interrupt output with AXI interrupt controller. In the software part, I can create several interrupt callback functions for different interrupts. I wonder Where the interrupt routine vectors stored in if I disable the AXI interrupt controller fast interrupt option? Are they stored inside the specific IP?
E.g.: if I have an VDMA and setup its callback function for general and error, then the callback function starting addresses are stored inside VDMA registers?
Thank you.>> The address of the ISR is stored in this table", so is the table stored inside the interrupt controller on inside ARM cpu? But when I used microblaze, it seems there is no interrupt controller inside the microblaze
No, that table is in a memory which implements the processor's address space. If you use MB, you can add an interrupt controller to it but that's not relevant. Interrupt controllers cause processors to jump to a fixed location in their address space. At this point in time there are two main options: either some program has registered to respond to this interrupt or not. In the latter case, the OS, bare-metal app etc takes a decision on what to do: ignore the interrupt, crash, just turn off that interrupt and return etc. If an interrupt has been registered to respond to that interrupt, the address of the interrupt service routine is in table belonging to the OS, bare-metal app etc so the code at the fixed offset jumps to the address inside that table ie it jumps to the ISR. -
Get the aforementioned error. I have modified my Data Source many times trying different settings. I created a SQL Login called RS_Subscriber, local machine acct the same name, added the same as a user for our database and the ReportServer database. Tried
with and without the Use as Windows credentials when connecting to the data source checked. I Test the connection okay but keep getting the #$^^$& error message.
Does anyone have explicit instructions on what type of account, where to create the account, what rights the account needs in order for the stored data source credentials to work?
MichiganMikeHi, This is because SSRS requires a Login to connect to the datasource to process the report when subscription will be occuring at its scheduled time. I would recommend you to store the credential securily into report server.
GoTo: Report>Properties> Click on the Data Sources tab and you will see following options:
a)A shared data source
b)A custom data source
Use option b) and click on option Credentials stored securely in the report server
and provide credential information and further you can use options: Windows credentials and Impersonate the authenticated User if you require. Click on apply button.
*You can use any option of them provided in first option(a) also using the shared data source which is having credential saved into report server.
Once you have done with above you will be able to create subscription.
Cheers Sunil Gure -
Exact table where the repository objects are stored
Hi,
In which table the repository objects(Program,FM,Data Element,...) are stored exactly.
I checked in TADIR table, but it's a directory for the repository objects.
Also checked TRDIR.
Say, If I delete a transport request which contains a report thru a 'Z_delete_request' prgm, I can still see the report in SE38.Ofcourse I have deleted in TADIR also.
But presents in repository.
Kindly suggest the exact table name.
Regards,
SivaHi,
Use seach option in SDN.
[System table in abap where all the programs/FMs created are stored !]
Regards
Sandipan
Edited by: Sandipan Ghosh on Jan 6, 2009 10:51 AM -
Where the word document is stored.
Hi Friends,
Using web dynpro they stored word document in SAP. where/how is it stored sap. and how is it retrive via SAP.
Thanks & Regards,
Vallamuthu.MIf you use ST05 to implement at trace on your userid, and then save a document through the web dynpro, you should be able to see where in the database the document is being stored.
If you drill down to the underlying source, you should be able to find the area of code performing the save. -
Where the AAA cache is stored??
Hi,
I'd like to know where the DB for the AAA caching is stored. because i made a caching for my users and it works well. but at reboot, the cache is empty and we need to reauthenticate to populate the DB.
Is it possible to store that DB in NVRAM or another location ? where can i see this DB file?
Thanks for replyHi Amjad,
we use authentication via a RADIUS server hosted on a windows server 2008, we autenticate users to grant access to the network devices like switchs and routers Cisco. we match on an active directory user and give differents level privileges.
everythings is good, works fine, we use this as a fail-over for access to the devices. but we have some mobiles equipments, and we like to grant an access even if the mobile device is not connected to our network. but the problem is, when we shut down the devices, the cache is cleaned, and after reboot, the cache is empty.
I'd like to know if it's possible to store the AAA cache in a location who can stay populated like in NVram for example. is it possible? where can i see the cache file? can i see it?
thanks
Maybe you are looking for
-
im on firefox 4 ,recently ,i tried new addon for firefox 4 called start up faster, i removed it, just as comparison to see boot up times , and then when i tried to install again i get the message create service failed, the icon stays on my desktop, w
-
With 4.0.1 I can no longer click on Google's drop down menu
Since I got my upgrade, when I try to click on the dropdown menu in the Google toolbar to return to a previous search, nothing happens. This is very annoying and like a previous questioner I would like to go back to my earlier version of Firefox - I
-
How do I determine the correct part number for a replacement topecase with keyboard?
What is the correct replacement part number for a Macbook 13" Core 2 Duo (Identifier 4,1) s/n W88*****0P0 ? <Edited by Host>
-
hi, can some one tell me the data source we should use for extracting data from ECMCT table? the potential data source we identified is 3EC_CS1A but there is no documentation available on this data source. could you documentation provide us the s
-
Is it possible to replace dots composing a line with, for instance, triangles or squares?