Where the roles are displayed in Visual Administrator

I have created the roles through user admin i.e using
http://<server-name>:50000/useradmin/ . In Visual Administrator where I could see those roles.

hi
Visit the Cluster --> Server --> Services --> Security Provider -->User Management Tab
You may search for your users there and assign/re-assign the roles to them.
Regards
Ak.
Message was edited by: Arunkumar Ravi

Similar Messages

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced.

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced. Any suggestions?

I'll guess you've already discovered the answer to this, but just in case:
Reminders works with Outlook tasks by syncing with iCloud, or through Exchange. You can't sync iOS Reminders with Outlook Tasks via USB/iTunes (like you can do with Notes, Calendar, Contacts).
So the marketing material on Reminders is a little misleading in that it's not specific enough -- there is no syncing without one of those intermediary systems mentioned above.
On a side note, syncing Tasks/Reminders via iCloud is not very good in my opinion:
Requires that you sync to the cloud, even if you have no other use for storing personal data in the cloud.
Requires that the iCloud Control Panel be installed on your PC (not sure about Mac).
After syncing, you'll find new Calendar and Task groups called "iCloud" have been created in Outlook. The calendar groups appear to be created even if you're only syncing Tasks/Remminders (not sure why).
Reminders are stored in the new group (noted above) called "iCloud" rather than in your default Tasks group. This seems to me to be a sort of "parallel" sync, rather than a true sync with Outlook. There are oter implications of your synced tasks being in the new group that I won't go into here, but you can search the interwebs to learn more.
In my own case, I tried iCloud syncing, decided that I didn't like it for the reasons stated above, and then uninstalled (Control Panel and new Outlook groups) with no apparent ill effects.
Though I don't guarantee you'll have the same results, it might be worth a try to see if it suits your purposes.

I was watching a episode of OCC and they showed the office where the production company does editing and administration

I was watching a episode of OCC and they showed the office where the production company does editing and administration.
I noticed that they were using software that allow them to use Date/Time stamp from the recording to edit multiple tracks of video. Not only that, but it seemed as though each track was being view in separate monitors.
OK... I know I'm pushing this one; but, does PE7 have any of these capabilities(IE. date/time stamp)?
I was seeking a quicker way to sync multiple tracks. The use of the audio on timeline is good, but there's got to be a better way.
Or does Adobe product another product that will do it all(IE, CS3)?
I really don't have it in budget to purchase another $1500 software package.

There is a 3rd party program, DVDate, that might be able to extract that data and display it.
Both PrPro and AfterEffects can add the runtime counter, but that is not quite the same as the date/time stamp.
As for multiple Source Monitors for multi-cam Projects, PrPro has that feature. The display on multiple "physical" monitors depends on one's video card, and also on video feeds via FireWire to a TV, but the feed to a TV will be only the Program Monitor Panel, not the multiple Source Monitors.
There are probably more people, who want to find a way to remove date/time stamps, that have been turned on in the camera. Nowadays, it's not quite like the old character-generator data, that appeared on many VHS camcorders, and also still cameras.
Good luck, and depending on your camera's metadata, DVDate might do part of what you want.
Good luck,
Hunt

HT4796 I did all of the above and the migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don'

Migration Assit , PC to MAC - The migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don't have. What must I do to access my files?
My experience is with MS PC's I'm new with the MAC Book Pro.

Then, see if this works:
Mac OS X 10.6 Help- If you forget your administrator password
If you are running Lion or Mountain Lion you may need to do the following to access the same utility:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

Please help me to find the table for fields where the descriptions are give

please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator

You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.

Where can I find MessageTransformBean in Visual Administrator

Hi to all,
Where I can find MessageTransformBean in Visual Administrator?
Thanks!
Message was edited by:
Gabriele Morgante

Hi,
added to the sridhars forum..
http://help.sap.com/saphelp_nw04s/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/84/2e3842cd38f83ae10000000a1550b0/frameset.htm
vasanth.

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
To edit the list, tap edit as shown below.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

How to find where the segments are get filled.

Hi friends,
I want to know, where the segments are getting filled for an IDoc. Actually i have failed IDoc's, in that IDoc the segment E1EDS01 the Qualifier is 009 its having 2 fields one is SUMMID its having value of 009 and another one is SUMME its having the value of 4.124.
The requirement is this SUMME value is wrong for selected Idocs. How i debug this? I know the partner profile name, basic type and message type. How i will get the proper include name?
Its an outbound interface.
Pls anyone advice are help.
Mohana

Hi Mohana,
If you have partner profile, then goto transaction WE20 and search for your message type in Outbound paramters of that partner and double click on it. Then click on the "_Message Control_" tab.
Process code will be defined there it will direct you to Outbound processing Function module. Then you can find your segment inside include of that Function module. (It could be user-exit also)
If you cannot find process code there, then look for corresponding EDI Output type which triggers the outbound Idoc and get the program name through transaction NACE.
Hope this will help you
Regards
Saravanan

While drilling up/down the report, the results are displayed after delay

We have a WebI Report whose hierarchy is based on the time Year -> Quarter -> Month -> Day -> Hour -> 30 mins.
While drilling up/down the report, the results are displayed after much delay and most of the time, all / some of the values are displayed as "#REFRESH" or '##########'. However, if i refresh it, all the values are displayed.
What could be the cause for this issue? and how to troubleshoot it?
Thanks In Advance!!!

hi,
This error appears in cells due to smart measures when the value returned by the smart measure is not available. This occurs when the grouping set containing the value is not available with the data provider.
Remove the error by refreshing the data.
Regards,
Vamsee

Customer invoice : where the account are maintained ?

Hi,
when we post a customer invoice, the system generate an FI doc automatically : where it finds the appropriate accounts related to each material ?
please where the settings are done ?
i hope your help
Regards.

Hi,
Generally Accounting takes effect from Posting Key and Document Type. Posting key control the debit and credit entry in Accounting and Document type control and defined the nature of acconting.
all the setting comed from tcode VKOA. As far as your case is concerned, when you make the customer invoice, Customer will be debited and sales will be credited. Customer Gl will take effect direct from its master data maintained. i.e Reconciliation Account and posting key will be 01. and for sales, posting key will be 50.
Regards,
Jigar
Edited by: Jigar Thakkar on Aug 1, 2008 4:19 PM

I am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

Backing up, updating, and restoring iPad, iPod touch, and iPhone software
more detailed information about backing up

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twic

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twice but they have not been able to fix the problem.

I went through the activation process yesterday and shut down my PC when I went to bed last evening. When I got up this morning and turned my PC on and then started Lightrom 6 (I upgraded from version 5) it started to launch but then just hung and became "not responsive". I I then uninstalled and then reinstalled the product today but the same thing happened. What is weird is that when I install from the standalone file I downloaded when I purchased the upgrade it looks like it's downloading the software again over the Internet? I have been having these problems for the last four or five days. I have contacted the chat support folks twice and they were able to get it working but whatever they did did not last as the problem reappeared again once the PC was shut down and then started up again.

Where the roles are displayed in Visual Administrator

Similar Messages

Maybe you are looking for