Where ti find gateway host and gateway service of PO system?

Hi,
I am using a single-stack PO 7.4 system? I want to know how can I know the gateway host and gateway service of the system? basis team was not able to help so choosing this forum for this.
Regards,
Vikas

Hi Vikas,
you can find the default setting in below blogs or documents
Sending and receiving IDOCs using a single stack SAP PO system
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5050119d-9c47-3110-eab0-d90ebd211e69?QuickLink=index&…
Configuration of inboundRA in the Java IDoc_AAE Adapter - Process Integration - SCN Wiki
Connect multiple SAP ECC clients from Java IDOC Sender Adapter by Resource Adapter Cloning
regards,
Harish

Similar Messages

What does virtual host and port mean in a system in ESB console

Hi !
When you click on a system in ESB console you can see and change 'cluster name' , 'Virtual host' and 'Port' .
What does this mean ?
As default the port is 8888 even though the installation uses port 80.
If I change the port, I see no difference.
Could someone please explain ?

It is used to generate the endpoint urls in the wsdl's for the services you have deployed. It needs to be set to the esb server and port number where the services are installed. So if your esb installation uses port 80 you need to change 8888 to 80. Try the wsdl and look at the url of the endpoint.
Kind Regards,
Andre

Where to find after "Archive and Install"

Hi everyone. I recently installed Leopard onto my Macbook. During the process, I used the archive and install feature to save all of my old data and files. Right now everything is located in the "Previous System" folder on my hard drive. I am trying to find my iCal information, but don't know where it's located. Does anyone know?
I didn't backup any of my calendars. I didn't think I would have to since all the information should already be saved.

aimili,
If you actually accomplished an Archive and Install, you should be able to open iCal and the previous calendar information will populate your upgraded iCal. What calendar information is displayed in iCal when you open the application?
If your old calendars are not displayed you should be able to find your previous information in folders named something like 4A1DC586-14EC-4D42-B659-BEBA31968385.calendar in the Users/yourusername/Library/Application Support/iCal/Sources Folder of your previous system folder. There will be as many of these folders as you had calendars on the previous system, but they will have different alpha numeric names on your computer than the example which I just gave you.
Open these oddly named folders and you will find the corestorage.ics files containing your former calendars.
Use iCal to import the corestorage files by using the iCal>File>Import... menu command to navigate to and import the appropriate corestorage.ics file for each of your calendars.
Did you ever use .Mac? If so, you may also have calendar information that can be retrieved from that service.
;~)

Where to find the olb and pll directory

hello, im trying to implement something i need to past two files in olb directory and pll directory, im using oracle10g
where can i find those directories.. where are those folders?
please reply asap

Hello,
There is no PLL directories or OLB directories. Just copy these files in one of the folder defined in the FORMS_PATH variable.
Francois

Where to find Devices tab and enter the printer's claim code????????

Just finished setting up the printer. Hooray it was easier than I thought. But now I have a print out that said I need to create an account. I already have an account so I signed in. But I cannot find the Devices tab or where to enter the printer's claim code. Could someone from HP or another user assist me. I would greatly appreciate the assistance and I wish to thank you in advance.

Hi,
If you already have an account (HP Connected account). When you sign in, the Devices tab is the one at the right end of 4 tabs. Otherwise please Sign Up from the following link:
https://www.hpconnected.com/us/en???localeDetected=true
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MVC: Where to find the model and the table select in standard BSP apps?

Hello!
We are going to use MSS with the appraisal-application
which is written in BSP and 'e-recruiting'. Both applications use the MVC-design pattern. We are going to do some modifications, but are struggling a bit since MVC is a new topic for us. How is the best way to get an overview of the controllers and views and call sequences in an existing application? We have done this by debugging, but are there other ways to find the 'starting controller', etc. ?
Where can we find the model-code which reads the table-values into the internal table?
We have read a lot about how nice MVC is - how the design gives you a better overview of the application. But without any docuemtation of the design we are quite lost. What are others experiences on this?
regards Tine

Hi Tine,
let's see if I can answer your questions (at least partially).
The main controller is the one you normally call directly in your browser (or after some introduction pages like login etc.). It's typically called start.do or main.do (but can differ). So if you call in the browser:
http://myhost.domain:4711/sap/bc/bsp/sap/myappl/start.do,
just call se80, choose the application myappl and double-click on start.do. There you can get the name of the controller class (just double-click on the class name).
The standard model class is called CL_BSP_MODEL. The model classes from the application inherit from this class.
For a complete documentation please have a look at the online docu:
http://aiokeh.wdf.sap.corp:1080/SAPIKS2/contentShow.sap?_SCLASS=IWB_STRUCT&_SLOIO=EDBB153AAB4A0C0EE10000000A114084&TMP_IWB_TASK=PREVIEW2&RELEASE=640&LANGUAGE=DE&_SEQNUM=106&_LOIO=0FAB3A3C9CA75402E10000000A114084&_CLASS=IWB_EXTHLP
There are also some weblogs written by Craig Cmehil where you can get examples.
Hoping this helps a little bit.
Regards,
Rainer

(Urgent) Where can find the code and documentations for ATG mobile ?

Hi there,
We have a customer (Gome) which is implementing ATG products and ATG solution needs to support iPhone app as well. Due to the tight schedule, we are looking to have some reference modules to jump start our mobile module development and help us staying on the course of ATG best practices.
Before we can find some open source ATG mobile code available on community.atg.com site as part of ATG program. However they can not find it now because community.atg.com was closed.
Can anyone help on this ?
J.K Liu

The iPhone, Android, and mobile web solutions were previously provided via the ATG Catalyst program. As of the acquisition by Oracle a year ago, those offerings were withdrawn and are no longer available. Oracle has not provided any guidance as to whether they might be made available again, and if so, when and under what licensing guidelines.
I'm afraid that you're on your own. Sorry!

IPhone: Where to find good Documentation and Samples for Auto-Rotate?

So I'm starting to get into the auto rotation features for my iPhone apps. I've spent a couple hours looking for some apple documentation and searching online, but I'm not finding any "definitive" guide to discuss the process. Any recommendations would be great!
Specifically, I'm trying to learn about the following:
- I have already implemented auto-rotation, but how do I setup my view so when rotated, it adjust the UI to take advantage of landscape mode. (i.e. I want to add extra features, and re-position some things)
- I also would like to the option within a couple views, that when rotated, goes to an entirely new view.
Thanks in advance!

I generally find that vector drawing programs are better for drawing toolbar icons and the like, as vector drawings are easier to tweak and adjust later. I've had great success with VectorDesigner in my own apps; it has a shallow learning curve and a solid basic feature set, although it can be quirky at times. (It also doesn't play all that well with certain development tools: don't try to add VectorDesigner files to Xcode projects, and make sure you zip them before you add them to a Subversion or CVS repository. VectorDesigner files are packages--like application bundles--and those tools don't play well with packages.)
If you want to go a little higher end, Illustrator is the Photoshop of vector drawing, but like Photoshop you'll probably find it very difficult to start out with.
You'll also need a raster graphics editor to tweak exported images. I use Pixelmator for this, but Photoshop will work just as well.

Where to find Portal WebService from Portal Service

Hello,
I've managed to create a portal service. i would now like to use it as a web service.
I've found document describing the process, however when try to create a portal object I'm proposed with the choice for portal service, Portal Componant and KM Componant , but not the needed "Web Service from portal Service" .
Does anyone know what you have to get/add/activate to have this option ?
i'm on NWDS version 7.0.14
regards
Guillaume PATRY

Hi Guillame,
To expose your Portal Service as a Web Service, follow the steps :
1). Select the project containing the Portal Service you wish to expose as a web service.Generate Portal Web Service with PDK Wizard by choosing Portal Web Service From Portal Service.
2). Select the interface by clicking the browse button.You can only expose the interface that are defined in your Portal Service Project.
3). Select the method you want to expose to the web service.WSDL files will be generated.
4). The portalapp.xml will be automatically updated with the WSDL entries.
5). Deploy the Portal Service on Portal.
6). View the Web Service on Portal in the following path :
System Administration --> Support --> Portal Runtime --> SOAP Admin --> Web Services
7). The generated WSDL can be viewed with the URL :
http://<server>/irj/servlet/prt/soap/com.sap.portal.prt.soap.<servicename>.
Hope this does solves your problem.
Do award points if found helpful.
Thanks & Regards
Gourav.

Where to Find iWeb Info and Tips

This page contains links to sources of basic info plus a number of tips for using the iWeb program included in iLife 06:
http://web.mac.com/thgewecke

JDBC is the same for any database.Hmmm...what about the URL?
What about blobs in Oracle 12 drivers?
What about stored procs in Firebird?
What about the return value of executeUpdate()?
What about making changes via MS Access and then doing a query?

Where to find predined smartforms and corresponding output types?

he send it urgent pls?

Please have a look at below link. It will give you some details.
http://help.sap.com/bp_autov1470/Auto_DE/HTML/PreconfSmartForms_EN_DE.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Where to find email body text saved in SAP tenant system?

Hi
i wants to change email body text, in my tenant sap system we have one mail format like body as below:
Hi customer,
Thank you for your order.
Yours sincerely,
xyz
now i wants to add some extra text in the above body text. for now i am editing it for every order. i want it to setup once.
below step i am using:
https://my____.sapbydesign.com
first login to your tenant system and go to sales order workcenter-->select one sales order id-->view all(in the right most corner)-->now click on you can also button-->edit output settings.
one window will get open here i am editing the body text.Can anybody suggest me where i can find this saved email body text so that i can append some text in this.

Hi Douglas,
Thanks for reply.
Your given link dosent opens "server not found" error. And Last time i had raised an incident to SAP and got the below reply(Some part of reply).
"Email body text field feature will be available in FP 1302 system the BO: /DOC/OM_DOCUMENT_OUT_REQ -> ROOT->ITEM->EMAIL_BODY_TEXT field is PSM write access is enabled."
"standard email
template can further be modified by making the field
“EMAIL_BODY_TEXT” PSM enabled.
The hierarchy is ROOT->ITEM->EMAIL_BODY_TEXT.
This feature can only be available in FP 1302 and above systems".
Can you help where and how i can use this.

Find portal oracle database host and port

HI ,
We have EP 7.0 sp15 with oracle database,
Is there a way to find the host and port of oracle database programatically

Hello namit,
I'm the same problem, do you solved it ?
Tks,
best regards.

Find portal database host and port programatically

HI ,
We have EP 7.0 sp15 with oracle database,
Is there a way to find the host and port of oracle database

Hello namit,
I'm the same problem, do you solved it ?
Tks,
best regards.

SAP Fiori - Transports Dev to QA/Prod issues (Activate and Maintain Service)

Hi All,
We have configured and activated Fiori - PO and PR scenarios in development environment using Central Hub Architecture (Gateway-Backend system). It is working great. However, we are facing an issue while transporting the configuration between the environments. We configured the entries (System Alias, Activate and Maintain Service and Scenario) for QA/Prod Environment in Development environment and transporting those (as it lets us to create TR's and as any SAP Configuration or technical Object). The transports are imported successfully, however the service is not activated or seen in "Activate and Maintain Services" in QA/Production Environment. But, scenario definition for PO and PR are imported successfully and visible
Steps and Transports:
1. System alias configured for QA/Production (Central hub) entries in Development box and transported - Successfully imported and entries are seen
2. Activate and Maintain Service entries are configured (workbench request- Loads Oauth and Metadata along with the System Alias assigned) - Transport import successfully, However not seen in "Activate and Maintain Services" (tried even creating a customization TR's)
3. Scenario Definition (PO and PR) - These are successfully imported as well as we are able to see the entries in SPRO
Solution Options:
1. Configure the entries and import (No success yet)
2. Manually re-configure or Activate and Maintain Service in each system [QA/Prod] (Again, SAP let us transport for this step - So, my understanding option 1 should work).
Any recommendation or suggestions ? Or is the Option 2 the only way to go!
Thanks in advance
Cheers,
Sri

Hi Sri,
I think the Support Package for Gateway is old.
1922510 - Activated Gateway Services are transported only incompletely
Regards, Masa
SAP Customer Experience Group - CEG

Where ti find gateway host and gateway service of PO system?

Similar Messages

Maybe you are looking for