Where to apply XSS patch for ESS?

Hi experts,
We are implementing ESS BP 60.2 in our firm.
For this purpose , we need to apply XSS patches as per SAP note 761266.
But I couldnt make out where exactly the patch should be applied.
Should I apply the patch on the ERP side? or EP ?
I guess it should be on the ERP side itself.
But can any one confirm it??
Thanks alot
Shobin

Hi sharadha,
Thanks alot for your reply.
Here, we have j2ee server installations both for our ERP and EP.But ERP runs on ABAP stack.
So which is the exact place to apply these patches?
EP side or the ERP side?
Thanks alot
Shobin

Similar Messages

Exact XSS Patch for ESS/MSS in EP 6.0 SP 16

Hi experts,
We are planning to implement ESS and MSS in our firm.
Our current system configuration is as follows :
NW 2004 EP 6.0 SP 16
WAS 6.40
ECC 5.0
I went through a nice blog which has a step by step procedure to do this.
I went through SAP Note 761266 also.
But this note is a bit vague. I couldnt find out the exact support package to be installed for my purpose.
Also, how can i find out the support level of my ECC 5.0?
Our SAP BASIS Support level is 15. Both are the same here ?
Can any one help me on this?
Thanks alot
Shobin

Can any one help me on this??
Thanks Alot
Shobin

XSS download for ESS installation?

Hi,
I just installed the NetWeaver Sneak Preview and now I like to add ESS to it. I have access to mySAP ERP 2004 and 2005 backend systems.
In the forum I read that I need a XSS (is this cross side scripting?) installation package and the ESS Business Package.
I was able to download the ESS Business Package but where can I get the XSS? And what is XSS exactly?
I would also need some detailed installation/configuration guides. I just searched Forum/SDN/Marketplace but was not able to find a step-by-step guide.
You can also send me emails: [email protected]
Thanks a lot.
Best Regards,
Henning

Dear Mr Michelson,
the XSS stands for (ESS & MSS) they have compined (M+S=X) so thats why you saw the XSS.
http://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
the documentation is helpfull ..
http://service.sap.com/swdc
also in your Portal you can check the standard i-views, under Portal content > Contebt provided by SAP > end user contebt > com.sap.pct.ess.employee > then roles, worksets, pages and i-views.
kind regards and good luck
Abdulrahman

Refer to Doc ID 825030 which talks about applying of patch for correction of date format in web adi. Is this patch can be applied on R12.1.3 instance as this patch released date is very old. Please suggest if there is another patch which be applied to cor

Refer to Doc ID 825030 which talks about applying of patch for correction of date format in web adi. Is this patch can be applied on R12.1.3 instance as this patch released date is very old. Please suggest if there is another patch which be applied to correct the date format in web adi. currently the date is coming in number format.

Hello,
This document is for 11i Date Format Changes When Loaded Into Webadi (Doc ID 825030.1)
use this document instead for R12 : Incorrect Date Format in Excel Sheet Generated Via WebADI (Doc ID 828253.1)
<Moderator Edit - deleted MOS Doc content - pl do NOT post such content>
Best Regards,
Eric.

From where can i download patches for sapb1 2005b

hi
from where can i download patches for sapb1 2005b

Hi,
[SAP Channel Partner Portal|http://service.sap.com/smb]
you need a SUser with access to the Partner Portal.
click at top "Solutions" / "SAP Business One"
after this you have at right
One Click Resources
there click
Installations & Updates
regards
David

Errors on applying PSU patches for GI (Grid Infrastructure) 11.2.0.3

Need help!
This is all in the version of 11.2.0.3.   We created a single node GI with ASM by the user grid.   Grid home is /grid/product/11.2/grid/   And oracle home created by user oracle at /oracle/product/11g.    I have downloaded the GI PSU patch 16742216 for GI and Oracle DB PSU patch 16619892.   I just want to apply the patch to GI home, then Oracle home with different PSU.   Here is what I did after unzip the patch for GI:
1.   Stopped ASM instance and stopped listener (these are owned by grid)
2. Created a ocm response file at grid home by grid user:   $ORACLE_HOME/OPatch/ocm/bin/emocmrsp   -no_banner
3. Use the root to run grid profile to setup grid GI environment
4. Use the root to run as (as described in Oracle instruction): opatch auto /home/grid/patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp
But got this error.   For some reason it looks for Oracle home, not grid home, although I do not have any oracle home environment setup in root user:
===================================================================================================
lsildb10p|+ASM|/home/grid/patches $ opatch auto /home/grid/patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp
Executing /grid/product/11.2/grid/perl/bin/perl /grid/product/11.2/grid/OPatch/crs/patch11203.pl -patchdir /home/grid -patchn patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp -paramfile /grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/s_crsconfig_defs
This is the main log file: /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-10_09-17-36.log
This file will show your detected configuration and all the steps that opatchauto attempted to do on your system: /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-10_09-17-36.report.log
2013-08-10 09:17:36: Starting Oracle Restart Patch Setup
Using configuration parameter file: /grid/product/11.2/grid/crs/install/crsconfig_params
The opatch minimum version check for patch /home/grid/patches/16619898/custom/server/16619898 failed for /oracle/product/11g
The opatch minimum version check for patch /home/grid/patches/16619892 failed for /oracle/product/11g
Opatch version check failed for oracle home /oracle/product/11g
Opatch version check failed
update the opatch version for the failed homes and retry
======================================================================================================
Where I did wrong?   Thanks for advice!

Thanks for the update. I have tried with chmod -R a+rwx on the patch location.   But got the error (different error). Here is long detail message in /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-13_06-35-35.log
=====================================
Log file location : /grid/product/11.2/grid/cfgtoollogs/opatch/opatch2013-08-13_05-35-37AM_1.log
Invoking utility "saveconfigurationsnapshot"
UtilSession failed: UtilSession failed to generate configuration xml file [ PRKH-1001 : HASContext Internal Error
PRKH-3013 : An improper buffer argument was supplied to Cluster Synchronization Services ]
====================================
When I run the command as root, the ORACLE_HOME is set to /grid/product/11.2.3/grid/   which is the home for GI.
Then check in the log file: /grid/product/11.2/grid/cfgtoollogs/opatch/opatch2013-08-13_05-35-37AM_1.log
[Aug 13, 2013 5:35:38 AM]
OPatch was not able to create .patch_storage directory
Unable to get Environent variables for Stand Alone home

Error importing with impdp after applying a patch for oracle 11g

Hello guys,
I recently unistalled all the oracle software with my database in order to start all fresh. I then installed the database and applied a patch from the version 11.1.0.6.0 to 11.1.0.7. I used the DBUA to do such a thing and it worked wonderfully.
I'm now trying to do a full import but it seems there's something wrong with the connection. Below is the syntax and am using Windows 7 BTW.
C:\>impdp \"sys/2learn@practicante as sysdba\" full=y DIRECTORY=export DUMPFILE=expdp.sgtc.01052012.dmp logfile=impdpPRACTICANTE.log
Import: Release 11.1.0.7.0 - Production on Lunes, 07 Mayo, 2012 15:20:55
Copyright (c) 2003, 2007, Oracle. All rights reserved.
UDI-12154: la operaci¾n ha generado un error ORACLE 12154
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
C:\>
Thanks!

Thanks for the reply!
You may be right about not using the sysdba to logon but just changed it...am still having the same issue though.
SQL> ALTER USER scott IDENTIFIED BY tiger ACCOUNT UNLOCK;
Usuario modificado.
SQL> GRANT READ, WRITE ON DIRECTORY export TO scott;
Concesión terminada correctamente.
SQL> connect scott;
Introduzca la contraseña:
Conectado.
C:\>impdp scott/tiger@practicante full=y DIRECTORY=export DUMPFILE=expdp.sgtc.01052012.dmp logfile=impdpPRACTICANTE.log
Import: Release 11.1.0.7.0 - Production on Lunes, 07 Mayo, 2012 16:05:23
Copyright (c) 2003, 2007, Oracle. All rights reserved.
UDI-12154: la operación ha generado un error ORACLE 12154
ORA-12154: TNS:no se ha podido resolver el identificador de conexi¾n especificado
C:\>type D:\Oracle2practice\NETWORK\ADMIN\tnsnames.ora
# tnsnames.ora Network Configuration File: D:\Oracle2practice\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
PRACTICA.cre.com.bo =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = GGTPRACTICANTE.cre.com.bo)(PORT = 15
21))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = practicante)
C:\>sqlplus scott/tiger@practicante
SQL*Plus: Release 11.1.0.7.0 - Production on Lun May 7 16:57:30 2012
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:no se ha podido resolver el identificador de conexi¾n
especificado
C:\>tnsping fubar
TNS Ping Utility for 32-bit Windows: Version 11.1.0.7.0 - Production on 07-MAY-2012 17:00:16
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Archivos de parßmetros utilizados:
D:\Oracle2practice\network\admin\sqlnet.ora
TNS-03505: Fallo al resolver el nombre
C:\>sqlplus scott/P@ssW0rde@practicante
SQL*Plus: Release 11.1.0.7.0 - Production on Lun May 7 17:14:49 2012
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:no se ha podido resolver el identificador de conexi¾n especificado
I tried to fix the error but it is still there...any other way that could help or is there anything wrong with what I have done so far?

Where to apply credential file for ADS Licens in VA?

Hi,
I got a credential file for ADS License to use it in EP.Can any body guide me where to apply this file in Visual Administration and go further in ADS Configuration.
with regards
Pradeep.B

Its not correct producure but u can try these
Extract the zip file
Goto -- tools -- internet options -- content -- Certificates -- import -- next --browse ur file -- give password -- now u can see expiry date here
delete file after checking
regards
Krishna.

Where to download the patch for Oracle Installer

Is there someone who knows where I can find the patch for older versions of Oracle Installer, which has Y2K problems. Thanks!

Hi again,
I forgot you can also download the compliant installer from this site if you go to Support page for Developer 6 ( http://technet.oracle.com/products/developer/)
regards
Warren

Error, After applying the patch for 10.1.0.2ERROR: OPatch failed because of

Download this patch from oracle metalink
This Bug for Linux x86 for oracle server 10.1.0.2
Bugs Fixed by this patch:
# 3520157 : CREATE INDEX USES EXISTING INDEX (IDX FAST FULL SCAN) AND RUNS SLOWER THAN TABLE
steps followed
for oracle_home
$export ORACLE_HOME=/home/APP/ORACLE/product/10.1.0/db_1
$/home/APP/ORACLE/product/10.1.0/db_1/OPatch/opatch apply
PERL5LIB=/home/APP/ORACLE/product/10.1.0/db_1/perl/lib/5.6.1:/home
/APP/ORACLE/product/10.1.0/db_1/OPatch/perl_modules; export PERL5LIB
/home/APP/ORACLE/product/10.1.0/db_1/perl/bin/perl /home/APP/ORACL
E/product/10.1.0/db_1/OPatch/opatch.pl apply
OPatch Version 1.0.0.0.47
Perl Version 5.006001
Oracle Home = /home/APP/ORACLE/product/10.1.0/db_1
Location of Oracle Inventory = /home/APP/ORACLE/product/10.1.0/db_1/inven tory
Oracle Universal Installer shared library = /home/mandar/APP/ORACLE/product/10.1 .0/db_1/oui/lib/linux/liboraInstaller.so
Path to Java = /home/APP/ORACLE/product/10.1.0/db_1/jdk/jre/bin/java
Location of Oracle Inventory Pointer = /etc/oraInst.loc
Location of Oracle Universal Installer components = /home/APP/ORACLE/prod uct/10.1.0/db_1/oui
Required Jar File under Oracle Universal Installer = jlib/OraInstaller.jar
/home/APP/ORACLE/product/10.1.0/db_1/OPatch/opatch.pl version: 1.0.0.0.47
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
Cannot set up OUI inventory session
ERROR: OPatch failed because of Inventory problem.
$

The error is due to the fact that, contrary what written in the documentation, the services shouldn't be restarted until the update process is completed

Applying a patch for calc manager

This patch is said to be applied on the HFM web server.
Then the first step is to stop the Internet Information Server and Calculation Manager Web Server.
So I went to the server manager on the HFM web server, found the IIS manager and stopped it. Is that right?
For the Calculation Manager Web Server, I'm not quite sure what to do. Any help would be appreciated. I"m usually a functional application person but I got no internal help from application support now. Thanks!

This patch is said to be applied on the HFM web server.
Then the first step is to stop the Internet Information Server and Calculation Manager Web Server.
So I went to the server manager on the HFM web server, found the IIS manager and stopped it. Is that right?
For the Calculation Manager Web Server, I'm not quite sure what to do. Any help would be appreciated. I"m usually a functional application person but I got no internal help from application support now. Thanks!

Variable SERVERNAME is undefined in CFIDE after applying security patch for APSB09-12

We attempted to apply the hotfixes available for ColdFusion and JRun released August 17, 2009 on our ColdFusion v8.0.1 and now are not able to connect to the ColdFusion administrator page.
This is the link to the securty update:
http://www.adobe.com/support/security/bulletins/apsb09-12.html
We receive the login screen, enter our user/pass and are then presented with the following error message:
The web site you are accessing has experienced an unexpected error.
Please contact the website administrator.
The following information is meant for the website developer for debugging purposes.
Error Occurred While Processing Request
Variable SERVERNAME is undefined.
The error occurred in index.cfm: line 22
-1 : Unable to display error's location in a CFML template.
Resources: Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser
Mozilla/5.0 (Windows; U; Windows NT 5.2; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 (.NET CLR 3.5.30729)
Remote Address
127.0.0.1
Referrer
http://127.0.0.1/CFIDE/administrator/index.cfm
Date/Time
01-Sep-09 04:59 PM
Stack Trace
at cfindex2ecfm274406133.runPage(E:\cf8_final\cfusion\wwwroot\CFIDE\administrator\index.cfm: 22)
coldfusion.runtime.UndefinedVariableException: Variable SERVERNAME is undefined.
     at coldfusion.runtime.CfJspPage._get(CfJspPage.java:325)
     at coldfusion.runtime.CfJspPage._get(CfJspPage.java:287)
     at coldfusion.runtime.CfJspPage._autoscalarize(CfJspPage.java:1405)
     at cfindex2ecfm274406133.runPage(E:\cf8_final\cfusion\wwwroot\CFIDE\administrator\index.cfm:22)
     at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196)
     at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370)
     at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
     at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:288)
     at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48)
     at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)
     at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
     at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
     at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)
     at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28)
     at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
     at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
     at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
     at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
     at coldfusion.CfmServlet.service(CfmServlet.java:175)
     at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
     at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42)
     at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
     at jrun.servlet.FilterChain.service(FilterChain.java:101)
     at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
     at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
     at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
     at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
     at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
     at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
     at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

This was caused by the Adobe patch, we removed the patch and applied the newly provided hot fix 3 and that resolved the issue.

[Solved] Applying synaptic patch for eviocgbit issue

My computer has been freezing randomly and looking through the logs I've been getting the following error:
Nov 21 12:28:20 archlinux evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
So there is a patch available at the link: http://userweb.kernel.org/~dtor/synapti … gbit.patch, but I have no idea how to apply it.
Any help would be appriciated
I think I found the solution in post 546, in this thread: http://bbs.archlinux.org/viewtopic.php?pid=439406
I'll post again if it doesn't work
Thanks
Jeff
Last edited by klazsick (2008-11-22 19:19:54)

oh well, no takers
solved it meself by grabbing the latest abook dev source and modifying my abs PKGBUILD to use that instead
haven't tried vcard importing yet but this much is [SOLVED]

Where can I get Patch for upgrade SAP GUI 3.O to 3.5

Hi All,
Could you please let me know the patch to upgrade SAP GUI 3.O to 3.5.
Thanks in Advance.
Sridhar.

Hello Sridhar,
I think you should get the latest SAP GUI Version which is 6.40 from ftp://ftp.sap.com/pub/sapgui/.
Regards
Gregor

Error applying patch for bug 4554072 (APEX 2.2.1 requirement)

All,
I am installing APEX 2.2.1 and is trying to apply the patch for bug 4554072. I have checked the OWA version:
SQL> select owa_util.get_version from dual;
GET_VERSION
10.1.2.0.0
And When I am trying to execute the privht8.sql script I get the following errors:
SQL> @904x_1012x/privht8.sql
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY HTF:
LINE/COL ERROR
19/10 PLS-00323: subprogram or cursor 'TITLE' is declared in a package
specification and must be defined in the package body
21/10 PLS-00323: subprogram or cursor 'HTITLE' is declared in a package
specification and must be defined in the package body
35/7 PL/SQL: Statement ignored
35/15 PLS-00307: too many declarations of 'TITLE' match this call
205/7 PL/SQL: Statement ignored
205/15 PLS-00307: too many declarations of 'ANCHOR' match this call
433/7 PL/SQL: Statement ignored
LINE/COL ERROR
433/14 PLS-00307: too many declarations of 'EM' match this call
443/7 PL/SQL: Statement ignored
443/14 PLS-00307: too many declarations of 'KBD' match this call
829/7 PL/SQL: Statement ignored
829/14 PLS-00307: too many declarations of 'TABLEDATA' match this call
834/7 PL/SQL: Statement ignored
834/14 PLS-00307: too many declarations of 'TABLEDATA' match this call
836/7 PL/SQL: Statement ignored
836/14 PLS-00307: too many declarations of 'TABLEDATA' match this call
840/8 PL/SQL: Statement ignored
840/15 PLS-00307: too many declarations of 'TABLEDATA' match this call
LINE/COL ERROR
914/9 PL/SQL: Statement ignored
914/24 PLS-00307: too many declarations of 'ESCAPE_SC' match this call
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY HTP:
LINE/COL ERROR
14/11 PLS-00323: subprogram or cursor 'TITLE' is declared in a package
specification and must be defined in the package body
15/11 PLS-00323: subprogram or cursor 'HTITLE' is declared in a package
specification and must be defined in the package body
1691/7 PL/SQL: Statement ignored
1691/7 PLS-00307: too many declarations of 'PRINT' match this call
1694/7 PL/SQL: Statement ignored
1694/7 PLS-00307: too many declarations of 'PRINT' match this call
1697/7 PL/SQL: Statement ignored
LINE/COL ERROR
1697/7 PLS-00307: too many declarations of 'PRN' match this call
1700/7 PL/SQL: Statement ignored
1700/7 PLS-00307: too many declarations of 'PRN' match this call
1703/7 PL/SQL: Statement ignored
1703/7 PLS-00307: too many declarations of 'PRINT' match this call
1706/7 PL/SQL: Statement ignored
1706/7 PLS-00307: too many declarations of 'PRINT' match this call
1709/7 PL/SQL: Statement ignored
1709/7 PLS-00307: too many declarations of 'P' match this call
1712/7 PL/SQL: Statement ignored
1712/7 PLS-00307: too many declarations of 'P' match this call
LINE/COL ERROR
1715/7 PL/SQL: Statement ignored
1715/7 PLS-00307: too many declarations of 'P' match this call
SQL>
Any ideas? I am hoping that I am just tired and is doing something really stooopid ;-)
Cheers,
Andy

Andy,
From the README.txt included with that patch:
- If the PL/SQL Web Toolkit version is either 9.0.4 series or 10.1.2 series and
the database version is higher than 8.1.7.4
SQL> @904x_1012x/privht.sql
SQL> exit
I’m assuming your database version is higher than 8.1.7.4. If so, then you need to run privht.sql and not privht8.sql.
Joel

Where to apply XSS patch for ESS?

Similar Messages

Maybe you are looking for