Where to ask about an OLDER iMac?

Hi guys, looks like this board is largely about the newer iMacs; where on here could I ask about the capabilities/potential of an older iMac??
I just had to ask because my parents have one of the older 1999 or so era blue iMacs, format Mac OS Ext., 320 MB RAM built in memory, OS 9.2.2, w/ a 6.29 GB drive that has 3.29 GB. I want to try to upgrade the OS for them over the holiday to make it just a LITTLE more internet-compatible (since whenever I come home it's practically impossible to check out a lot of sites; I don't even think they've been able to get onto their Netflix account lately that I gave them). Obviously I can understand why anyone would question why you'd bother upgrading such an older model; I'm hoping to give them my newer model G4 as soon as I myself upgrade to a newer computer in a few months, but I just was hoping to give them a temporary upgrade for the time being.
(As a side note, I have an External drive that's formatted to my G4--still running Tiger--that I was hoping to use to backup any important files from their boot drive prior to the installation--and in turn copy any upgrades they may need from--and wanted to know if you'd think the iMac could read it).
Anyone know??? Thanks so much.

Just look a little further down and you will see the iMac CRT discussion area. That is where your parent's iMac would be discussed.
For iMac G4 questions go to the "iMac (Flat Panel)" discussion area.
For iMac G3 questions go to the "iMac (CRT)" discussion area.

Similar Messages

  • Where to ask about XSLT?

    Hi,
    i cant figure out on how to code a parameter in XSLT. i've
      <xsl:param name="MESTYP" select="MT_XI_STAT"/>
    but MESTYP is never substituted. I cant figure out if i have to put a $ in front of the parameter or do i have to enclose it in brackets and if yes, in which one?
    Is there a special forum dealing with XML/XSLT here? Especially when it comes in combination with ABAP? Outside of SDN there are some really good forums, usenet is good, too, but most of them do not have a glue about ABAP and how to connect an XSLT to an ABAP report.
    Any help is appreciated.

    Thanks for the reply. In my special case i have to retrieve the value of the parameter via
    <xsl:value-of select="$MESTYP" />

  • Older iMac named (Lamp, Light)

    About my older iMac (Lampe).
    I would new format my HD.
    I've start my Mac by Program CD anf found DH support.
    I made a mistake and removed this HD-Volume.
    If I start my Mac new, it will not find any HD-Volume an I got a bad smile.
    how can I make a new HD-Volme new Installation?
    tanks for informations about this problems.
    Peter from Zuerichsee

    If I start my Mac new, it will not find any HD-Volume an I got a bad smile.
    Actually, this means that the mac could not find a valid os on a bootable os on a device or partition.
    Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    How to eject a cd from the internal cd drive:
    eject cd
    List of devices:
    devalias
    List of variables:
    printenv

  • I have an older iMac running on 10.5.8 and need to update to mountain lion how do i go about it?

    I have an older iMac running 10.5.8 and need to update to mountain lion, how do I go about it?

    Welcome to the Apple Support Communities
    Check if your computer is compatible with Snow Leopard > http://support.apple.com/kb/sp575 If it's supported, cal Apple to buy Snow Leopard > http://support.apple.com/kb/HE57 Then, make a backup, insert the DVD and upgrade. Finally, open Apple menu > Software Update and install the latest version.
    Check if your Mac is supported > http://www.apple.com/osx/specs If it's supported, open App Store and purchase OS X. Check if your programs are compatible > http://www.roaringapps.com

  • Hi, I asked about my WiFi modem? Sorry but I don't understand any of the suggestions given to me. We don't have an Apple Store where I live, the rest of it's over my head. I also don't own a PC. Any other suggestions? What's IPS?

    What I want to know is why did my WiFi modem work just fine for a whole week, now it doesn't. I can't get any Internet access if it's connected, if it's not I can't download apps from AppStore,as I have no Internet access. I'm tech literate, I don't understand what an IPS is, I don't know about ports and numbers, and there is no Apple store where I live. So now what am I supposed to do? My mum bought me the **** thing, it cost her $150, and it's worked for a week, and then excuse my French, **** itself! Can someone please help me, and in English please? I've only had an iPad since Christmas, I don't have a PC and wouldn't know how to do any of that stuff if I did. Very Frusterating!

    You asked about IPS. I believe you mean ISP, or your Internet Service Provider.
    Since you don't have a computer, you won't be able to change the router settings.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

    How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

    In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

  • I m login in th my iphone in the itune ti download something after entering cc details its asking about something itune gift card secure code...i am not getting this..where can i get this code in order to dowanload frm itune...

    i m login in th my iphone in the itune ti download something after entering cc details its asking about something itune gift card secure code...i am not getting this..where can i get this code in order to dowanload frm itune...

    Meen0902 wrote:
    ... after entering cc details its asking about something itune gift card secure code...i
    Try the 3 or 4 digit code on the back of your Credit Card....

  • I would like to ask about an offer regards to iPhone 5 where I can get an iPhone 5 if I bring back my old iPhone 4  200 US $ . Is that true ?

    I would like to ask about an offer regards to iPhone 5 where I can get an iPhone 5 if I bring back my old iPhone 4 +200 US $ . Is that true ?

    Since you don't provide any useful information, like who is making this offer, where, etc. we can't say.
    My gut, though says that the answer is either: No.
    Or.
    You have misunderstood something, since in the US, you can get an iPhone 5 for $200 (or less) by signing a 2 year contract with one of the major carriers here. The price is subsidised by the carrier in exchange for contracting for service with them.

  • Cheap monitor for my older imac

    Just looking for a cheap monitor to use as a display for my older imac (g5 ppc) which has recently gone dark. I believe the display went bad but it's possibly a graphics card issue. Just would like to find a cheap temporary solution to be able to load up my iPads and iPhones with music and movies and basic computer functions until I can afford a new Imac or possibly MacBook. Is there anything that I need to know about compatibility issues or is it just as simple as hooking it up via the USB ports on the back of the Imac?

    I connect my MacBook Pro at work to various different external monitors, and my daughter uses a Samsung external monitor sometimes with her MacBook Air. With our laptops, the default has been that the external monitor shows up "mirrored," which is what you want, since that means the external monitor shows the same thing that is on the built in monitor. Not so good would be to come up in the extended desktop mode since that might not give you access to various menus, the dock etc. on the external display (those things would be on the built in monitor, which isn't working for you.
    I can't promise you which it will be for you, but my experience has been that mirrored is the default (which is what you need), and to get extended desktop you need to go into the Displays Preference Pane and explicitly set that up.
    If you really are going to try an external monitor, I'd get one at Best Buy or Amazon or somewhere like that who offers a no questions asked return policy in the first 14 or 30 days. So if you are stuck with your Mac in a mode that doesn't allow you to use the external monitor, you can return your purchase.
    I also have a G5 iMac, and frankly, if the monitor went out, I'd simply replace the computer. The other parts inside are probably wearing out also. The February 2013 issue of Macworld discusses the latest Mac Mini's, which cost only $599 or $799 and are extremely fast and capable machines. These are Apple's "low end," and they are really superb machines. And if you get an external monitor, you can use it also with the Mini. By the way, if you buy an external monitor, I recommend staying away from the cheap loss leader units that are often advertised and instead spend a little more to get a quality Samsung or other good brand name monitor, possibly an LED one. The quality of the screen and images and resolution do make a big difference in the use experience. I got my daughter a low-cost ACER monitor first, and she is a photographer and demands high quality images on her screen, eventually we traded it back in at Best Buy (Best Buy has a nice trade in policy where you get a credit) and replaced it with a high quality (costlier) Samsung LED monitor.
    The G5 iMac is so limited, both in its hardware and software, that I'd say if you can afford it, look at the latest Mac Mini or iMacs. Even the low-end ones are probably x10-x20 times faster and more capable than the iMac G5 and you can do all the latest things with them.

  • Can I move the Photoshop Elements 6.0 from an older iMac to a new one?  The new iMac has no drive?

    Can I move the Photoshop Elements 6.0 from an older iMac to a new one?  The new iMac has no drive?
    Jerryt

    I share this person's pain.  And was just now about to ask the same question.  So, in effect we're screwed.  I have the disc but without a drive I think E12 and this computer is going to have a very short life in my life.  And for the life of me, why is so darn hard to get questions answered by Adobe?  Good grief...I have 2 books and have saty through enough video "tutorials" to last me for some time!
    1deu

  • Update/upgrade older iMac

    I'm a computer novice. My older iMac is no longer able properly to use many current websites and I get messages saying update to safari of firefox; but to get current versions of safari or firefox I need something beyond Mac OS X v 10.1.5, my current configuration. I've searched the Mac website, but it presuppose a starting point of at least version 2.0. How do I get where I can begin to go farther? Thanks in advance for any help!

    Welcome To  Discussions schuler!
    Here is a recap, of some of the info, in the previously posted replies, and also additional info.
    Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
    Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.10 (Pending), can be downloaded for free.
    Jaguar, Panther, and Tiger 10.4.x, are no longer available directly from the Apple Online Store, as Leopard 10.5.x, will be the most up to date OS, when it is released, on 10/26/07.
    But, if you know what to look for, the Jaguar Full Retail CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can be purchased less expensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, etc.
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Jaguar and Panther are only on CDs, not DVDs.
    The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    Caveat Emptor! Examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
    Jaguar On eBay
    Panther On eBay
    Tiger On eBay
    Before upgrading to any OS X version, check to see if your Mac needs a Firmware Update.
    If one is required, you must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
    Also check to see if your Mac model, is listed in this KB Article OS X Must Be Installed On First -8GB Partition.
    Once Jaguar 10.2.x is installed, you can use the 10.2.8 Combo Update,
    or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version of either OS.
    If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.10 Combo Update, to upgrade to the current version.
    Jaguar System Requirements
    -Power Mac G3 or G4, iMac, eMac, PowerBook G3 or G4, or iBook computer
    -128MB of physical RAM
    -Supports all video cards shipped by Apple on Mac OS X-compatible systems. Quartz Extreme functionality is supported by the following video cards: NVIDIA GeForce2 MX, GeForce3, GeForce4 MX, or GeForce4 Ti; Any AGP-based ATI RADEON card. A minimum of 16MB VRAM is required.
    -QuickTime Pro functionality requires a QuickTime 6 Pro key. The QuickTime 5 Pro key will not work after this software is installed.
    -DVD Player requires a DVD-ROM equipped Macintosh with built-in FireWire.
    Review these Apple documents for Panther System Requirements
    Additional Panther System Requirements.
    Additionally, Tiger 10.4.x ships on a DVD, so if your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
    Info here Installing Tiger Without A DVD Drive,
    and here Installing Tiger Using Firewire Target Disk Mode.
    The Tiger Media Exchange Program, referred to in that article, is no longer available.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    ali b

  • Who do I ask about PS elements 8 becoming compatible with windows 8???

    do I have any hope at all??  I downloaded it again from here, as I lost the disc at somepoint in time, I removed it from old near dead computer and cant load it to new one...   I read it was only windows 7 or lower... but I tried anyway..  and have no idea what Im doing so even if it works I dont think I know how to make it work as it came out in zillions of files..  What can I do, or who can I ask about windows 8 becoming available????? 

    There will not be any changes made to older Adobe programs to make them compatible with newer operating systems if that is what you are wondering.  Creating new versions of software is where most any company focuses their attention.

  • How do I repair the internal disk drive on an older iMac?

    Running Snow Leopard OSX 10.6.8 on an older iMac.  I ran Disk Utility and it found a problem requiring the internal disk to be repaired.   The instructions said to boot the system using an installation CD.  The only CD I have is for OSX 10.4.4 ( Tiger).  I don't have one for Snow Leopard. I can access this CD and instructions on the CD, "About Apple Hardware Test" say to hold down the D key to boot into the diagnostics, or the hold down the "C" key to boot to the OS on the CD.  Neither of these options work.  It keep booting into Snow Leopard (OSX 10.6.8) and I cannot repair the internal disk drive without running on an OS started form the CD.
    I've spent a couple of hours trying to get it to boot to the Tiger installation CD.  Wish I had made an install CD for Snow Leopard.  Maybe that would work.  Is that what I need?  I really think it should boot to the Tiger CD.
    I've spent lots of time in these user forums and don't see anything that helps.  Any suggestions??  Having trouble with doing automatic Time Machine backups to an external disk drive and maybe it is because of the corrupted hard drive.  Although the error looks quite minor from the description in Disk Utility.  The system runs fine and I don't see any other problems.  Just struggling with Time Machine. 
    This is an older iMac, 4,1 with a 2.0 GHz Intel Core Duo with 2 GBytes of SDRAM.  20 inch screen.  I have a MBP sitting next to it and use them both, even though I can't update the iMac to Lion or above because of the Core Due processor.  It is still a good computer and very useful. 
    What do I have to do to get it to boot from a CD?
    Thanks for your help,
    veehb

    That is well worth $20.  I'll pick one up tomorrow.  Is there an easy way to make an installatoin CD that will also be a backup for my installation? 

  • How can i upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

    How can I upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

    With the above listed config that I have (iphoto 7.1.5 on an older iMac running OSX 10.6.8), how can I move my iPhoto library from this old iMac (2006) to my NEW iMac (2011) that is running iPhoto 9.5.1 ?
    To open an iPhoto 7.1.x version in iPhoto '11 you need to run the iPhoto Library Upgrader. See this Support document:
    iPhoto '11: About the Library Upgrade
    Download and install the upgrader,  then run it on your iPhoto 7.1.5 library. After that, iPhoto will be able to open your library and upgrade it to version 9.5.1. And you will be able to merge the libraries with if Library Manager.

Maybe you are looking for

  • USB Ultranav keyboard does not work with Windows 7

    Hi, I recently installed Windows 7 to my Dell Latitude XT tablet and was disappointed to learn that my USB Ultranav Keyboard only works as a keyboard and not a 'mouse'; that is, the ultranav devices (touchpad, buttons, and trackpoint) do not work.  I

  • TM drive doesn't always mount on iMac startup

    Hi, TM seems to work well most of the time. Once in a great while though, TM drive doesn't mount on iMac startup, and if I don't notice the missing icon on the desktop, backups don't happen. TM drive is a Seagate Free Agent USB 500G. It's connected d

  • 802.1x with EAP-TLS and dACLs

    Hi, i'm looking to enable 802.1x on the wired network using EAP-TLS. The radius server will be an ACS5.2 running on the appliance. We'd also need some authorization for different machines - we'd like to use dACLs for that so that machine A will get f

  • TS3274 Why won't I stay logged in on my favorite websites with latest software 7.0.2

    I updated to 7.0.2,   Now every time I open safari and go to my favorite websites, I don't stay logged in like I used to.     What am I doing wrong?   How can I fix this?

  • Titles and photo info

    Earlier versions of iPhoto allowed you to keep the information pane showing until you manually turned it off. In 9.2.3 it goes away when the program is closed and then restarted. Is there a setting that will simply keep it on the screen? More importa