Where to assign the relation type PRDBP in customizing.

Hi,
I am working in CIC0. In Accounts,I am searching an object with serial number .I will get a list of product ID's as search result. When I select one product ,In the Partner field i am getting a text as Partner not bound.
When I debugged the program,I found that system is checking the database table comm_il_prdbp for relationship type PRDBP.Since entry is not there in this table,this text is shown.Can anyone help me out by providing details of where to assign this relationship of partner and product in customizing.
Thanks in advance,
Gincy.

This relationship is assigned at the the category level in comm_heirarchy transaction..

Similar Messages

  • Where we assign Exchange rate type at company code level,

    Dear All,
    Where we assign Exchange rate type at company code level, In 0BA7 we assign by Document type wise and OB22 will assign by controlling area wise , but we are not maintain Controlling area, exactly where we assign , and how it will pick at the time of PO creation ,
    Thanks in advance
    Vijay

    Hi,
    In OB22 we assign Exchange rate type against company code and not against controlling area .
    Regards,
    Shayam

  • How to assign the trip type to a particular employee.

    Hi,
    In HR - Module - Travel Management.
    I am trying to create a travel request for an employee.
    i am getting the error message :
    Statutory trip type does not exist in the system (T702G)
    how to assign the trip type to a particular employee.
    regards
    Giri
    *Points will be assigned for all the valid answers.

    If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
    there in the tri provision variant you need to enter the variant you have created.
    Under that select the travel planning trip schema PL.
    on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

  • Assigned the output type with AR also,It is printing in ENGLISH Only.

    Hi,
    I have written a Z Smartforms and Z print program.
    I have used ZRV56TD00(Copied from standard program RV56TD00),Inside it I have submitted the program(Z print Program) for the shipment number for the transaction code VT03N.
    It is now printing the form in english well and good.
    Now I want the same to work for the ARABIC.
    I had done the arabic translation in SE63 and If I run the program It is printing only in English.
    When the assigned the output type with AR also,It is printing in ENGLISH Only.
    Suitable answers will be rewarded.
    Regards
    Manohar S
    Edited by: Manoj on Jun 17, 2008 4:13 PM
    Edited by: Manoj on Jun 17, 2008 4:14 PM
    Edited by: Manoj on Jun 17, 2008 4:15 PM

    Hi Manoj,
    Goto transaction NACE and check wether you have mentioned the language in Mail title and texts for the particular message type.
    let me know if you require in more detail.
    Regards,
    Sharath

  • Assigning the output  type to the shipment number

    hello,
    can any one tell me how to assign the output type to the shipment number.
    Ex: ALTR to all my shipment numbers. By default, its taking other output types.
    Thanks in advance.

    Hello!
    Please check which output-types for shipment have been maintained in transaction code VV7x (Output-Condition Records).
    Menu path: Logistics -> Sales and Distribution -> Master Data -> Output -> Shipment
      - VV71 - Create
      - VV72 - Change
      - VV73 - Display
    Or go to customizing (TCode: SPRO) to verify how they have been maintained:
    Menu path: IMG -> Logistics Execution -> Transportation -> Basic Transportation Functions -> Output Control -> Maintain Output Determination for Shipments
    Regards.

  • How to assign the trip type to a particular employee. - Urgent

    Hi,
    In HR - Module - Travel Management.
    I am trying to create a travel request for an employee.
    i am getting the error message :
    Statutory trip type  does not exist in the system (T702G)
    how to assign the trip type to a particular employee.
    regards
    Giri
    *Points will be assigned for all the valid answers.

    Hi Fred,
    If you open any activities or opportunities, you can see the description if you select new button and click on the process type. It will be display Activities and below that New: Activity. Instead of always displaying the same description I want to override the description according to the process type. For me the application is not activity but Incident. Hope I am clear with the question.
    Thanks,
    Anu

  • Assign the quality type =01 at material type level

    Hi,
    I am working with quality Management , Here Client want to all Raw material is check at time of receiving .So We want to Assign the quality type =01 at material type level .
    How we can do that??
    Individual Material assignment is not possible because here more the 1lac material.
    Pl guide me for resolution of this problem

    Hii Mr.Tiwari
    I am hoping that you have created the QM view for the subjected materials. If you have created then you would have to give value in Inspection Plan setup. That is something insertion of values rather than updating / changing the data.
    Please clear if I am wrong.
    kapil

  • What is the movement type to post customer return stock to qaulity inspec

    Hi All
    What is the movement type to post customer return stock to qaulity inspection stock
    i am doing retuns process when ever i do post goods reciept in the return delivery return stock should automatically go to the quality inspection stock.
    pls give advises
    thnx

    Hi
    In your return order schedule line category DN (DN is the schedule line category of the return order in standard ) you need assign movement type 655
    If you assign movement type 655 when you do PGR for the return delivery, stocks will sit in Quality inspection directly
    653 will move stocks directly to unrestricted (Strictly not advisable)
    651 will move stocks to blocked customer returns (recommended by SAP)
    Regards
    Raja

  • Problem in creation of FSV regarding where to assign the specific GL acct

    Dear All,
    Currently i am working on creation of Financial Statement Version, and have some doubt regarding some of GL account as to where it will get assigned.
    1.Consumption of RM or SFG
    2. Cost of Production of FG
    3. Cost of Good Sold.
    Kindly also tell the relation between the above GL and how it will effect the Balance sheet. and why this is used for.
    Example is below
    1. At the time of issue of RM material to Production order
    Consumption of RM  100
      To Inventay of RM          100
    2.*At the time of Confirmation of FG *
    Inventory of FG                           120               
      To Cost of Production of FG              120
    3. At the time of PGI
    Cost of Good Sold     120
      To Inv of FG                      120
    Thanks in advance
    Regards
    Shayam
    Edited by: Shayam_210 on Aug 9, 2010 9:33 AM

    hi,
    These are all P&L GL accounts and need to be allocated under profit and loss accounts node.
    Under that profit and loss node, there may be diff sub items also.
    Sub item has to be decide d by you depending upon the FSV structure in your org.
    Regards,
    Srinu

  • Where we assign tax out type

    Hi expert ,
    could you plz tell me where we assign tax out condition type in sap SD ?
    regards,
    Bhaskar.k

    Hi
    Use the Transaction NACE , In that select V3 - Billing.
    Then press Output type option in the top, there you can define your output type for Excise .
    A standard output type J1I0 is available for Excise, you can use also use that.
    or else if you want you can create your own, and include that in the output type procedure to use it further.
    Finally you can maintian your condition record for the same using Transction-VV31
    Hopefully this will help you.
    Thanks.....................RB

  • How do we assign the Order Type PD(Planning & development) to a planttt

    Hi,
      I am creating a new plant. My ref. plant has order type PD(Planning & development).
      Order category - personnel order.
      How do we assign it to our plant. In Tcode KOAI. it s not showing only the order type PD for my plant. Can anyone help.

    Hi ,
      Can u Tell me how can we assign it , in case if i am not copying the existing plant.
    It is not populating in OKZ3 for my new plant.
    Edited by: Dhilipan Nair on Apr 19, 2011 10:32 AM

  • Problem in  assign the delivery type to the existing output type

    Hi
    There is a problem in assinging the existing Output type to the delivery type.
    In, NACE i have maintained the output type for the procedure and also through VV21 i have created the condition type with the combination of shipping point/delivery type.
    But system automatically not determining the output type when we create the outbound delivery. This output type is to trigger the EDI in terns..
    Can any one guide me what are the setting to be done for the same?
    Edited by: V. Mariappan on Jul 5, 2009 12:40 PM

    Hi,
    Check whether you have maintained the condition records for output for the above combination & also the Print device in the Communication tab & Print immediately settings.
    If you haven't maintained the above, do the same & check.
    Thanks & Regards,

  • Having trouble assigning the Data Type to Shared Variables

    I have some type definitions that I need to use as shared variables.  When making the shared variable, I create it and then name it.  I then select "From Custom Control..." in the Data Type field and select the applicable type definition.  The problem is that it displays some other type definition.  Am I doing something wrong?  I am using LV v.8.6. I don't recall having this problem with v.8.5.1.

    Hi Hunter,
    All the custom controls are set to Type Def.  Since sending my question, I noticed that the system uses the first similarly used custom control and it's name.  For example, I have several clusters that each have four numeric controls in them.  When creating a shared variable for each of the various clusters, it uses the first custom control that was set up as a shared variable.  I hope this makes sense to you.  I have not had a chance to see if the shared variables are working because I have other issues to deal with first. 
    What troubles me is that I don't recall seeing this with v.8.5.1.
    I suppose I could and perhaps should use a common type def for all similarly used shared variables.
    Dave

  • Hide a field inherited by the content type in a custom list definition

    The requirement is to create new content type that inherits from a Parent content type. I also created custom document library definition that uses the newly created content type.
    There are some fields that are inherited from the parent type that I would like "NOT TO" show in the edit/display form in the libraries created based on the new list definition.
    How can I achieve this? In the list definition, I added ShowInEditForm="FALSE" and ShowInDisplayForm="FALSE" ShowInViewForm="FALSE".
    But these fields won't hide and it still shows up when a new document is uploaded. Any help would be appreciated.
    Thanks!

    Hey,
    Have
    this link for your reference. It will help you.
    Thanks. Please mark it as an answer if it helps.

  • Where to assign the G/L Account to Material Group in SPRO

    Hi,
    Can someone tell the node in SPRO, where G/L Account is assigned to the Material Group in case of PO being created withourt Material Master?
    Regards.

    Hi,
    You can not link G/L Account to the Material Group directly.
    Use T.code:OMQW and assign Materil Group with Valuation Class and  then use account determination process,where you can assign G/L to   Valuation Class .
    Regards,
    Biju K

Maybe you are looking for