Where to buy more cinematic musics for Final cut's SoundTrack???

I love the cinematic musics included in garageband and soundtrack like
there's this piano song called "Newborn"
Others are like
-Broadcast News Long
-Celestial Body Long
-Investigation Long
-Medal Ceremony Long
-Piano Ballad
In Garageband these are in the Jingles section and in SoundTrack they are also somewhere in there
I'm not exactly sure where they c ame from but i bought 2 jampacks for garageband way back, so they may be from there or where already in garageband. Anyways, these are the kind i want. I want lots, of course i'm willing to buy them online. But is there a site that sellls those kinds of cinematic short music compositions?
I have Final Cut and SoundTrack 1.5

hey there jonsondonson,
you can use Acid loops in GB & ST/STP, they have samples from their CD collections for listening to on-line, but i don't know if they're downloadable.
see this link: http://www.sonycreativesoftware.com/loop_libraries/?keycode=7777-4701
good luck.

Similar Messages

  • Where can buy a new keyboard for my netbook?

    I have Nokia Booklet with water damaged keyboard... where can buy a new keyboard for my netbook?

    Sorry to hear your bad experience with Nokia Care Point in your region. Are you able to go to the retailer you purchsed the netbook from and ask if they could provide you with that part?
    Also, you may want to try call Nokia Care Line and they may have more recommendation as to where you can get a replacement. For now I would suggest you to plug in a external keyboard until you manage to track down a retailer which will replace your keyboard.
    Hope this gets sorted out for you soon.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014
    Digital camera RAW formats supported by OS X Lion:
    http://support.apple.com/kb/HT4757?viewlocale=en_US
    Digital camera RAW formats supported by OS X Snow Leopard:
    http://support.apple.com/kb/HT3825?viewlocale=en_US

  • Where can I find a good, free effect for Final Cut Pro of electrocution?

    Where can I find a good, free effect for Final Cut Pro of electrocution?  I'm using it for a taser sequence.
    Thanks!
    Matthew

    Open Motion, look for lightningin the generators. From there, it's a question of figuring out how it works and what you need to do to make it work for your sequence. That's about as free as it gets and it will ony be as good--even if someone else did the work for you--as the amount of time you're willing to invest.
    bogiesan

  • Where can I get replacement media or download for final cut 3?

    where can I get replacement media or download for final cut 3?

    There is no download for any install of Final Cut Pro before version X.
    For physical media, try contacting Apple Care support. Otherwise, ebay or alternative resellers is your only recourse for acquiring install discs.
    x
    edit: If you want Final Cut Pro 3, you'll need a PowerPC computer that can run OS9. If you mean Final Cut Studio 3 (aka FCS 2009) you'll have better luck finding something out there that will run on contemporary machinery.

  • Where can I find a full manual for final cut pro 6?

    I'm trying to learn final cut because I haver an amature film making contest I'd like to enter and that would give me quite an edge, considering most of the intries will be using movie Could someone help me find a full manual or something that would assist in this indevor? I do only have final cut 6 because I am using my schools imac and that is ther vertion they have. so, can anyone help?

    You should ask your question in the Final Cut Studio forum.
    This forum is for Final Cut Pro X.

  • Where I can find a free plugins for final cut pro or Motion

    I will like to know if is a web site that we can donwload free plugins for final cut pro. I found some web sites but they jave some samples but when you loud these to final cut pro it will have the name of the company that sell it or is will say Exanple or Trila versiona a cross the screen.

    go to proapptips.com (Dave Slater's FINE site) scroll down the page and look on the left site for links and follow through to plug in vendors. There are a bunch of freebies on various sites, all compiled by Dave, just for you.
    Some of these freebies ask for a small donation. Worth it if you use them!

  • MacBook Pro 13" or MacBook Air 13" for Final Cut Pro?

    I am looking at buying either a MacBook Pro 13 inch with 8Gb of RAM, 750 GB, and a 2.8 Ghz i7 Processor or a MacBook Air 13 inch with the 4gb of RAM and a 1.8 Ghz i7 processor. Which is better for Final Cut Pro X? I would rather have the Air, but if the Pro is better (which is what I currently have) that's what I will get.

    Is it a very noticable difference? Will I REALLY notice it? I know that the Pros are more powerful but I just wanted to factor in the SSD in the Air.

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • Storage for final cut pro

    i have a mac book pro and im looking into getting final cut pro so im thinking some additional storage is necessary... i've been looking at the WD 1tb mybook for mac, and im wondering if this will be enough room or will even work for final cut pro

    If it was me, and this advice is by no means definitive, I'd buy an eSATA express card and a good eSATA enclosure. It's what keeps us from getting new 15" MacBook Pros (the lack of the express card slot.)
    We have two Macbook Pros with eSATA express cards that are used on location for data wrangling or even editing. Each eSATA port can support up to 5 drives using port-multiplication (more actually, but one can't find enclosures with more very easily). Also two disk software-raid arrays work very well with the express card setups.
    But that's just, like, my opinion, man.
    Update: fellow posted above beat me to it! So, uh... +1?

  • What are the system requirements for Final Cut Pro 7?

    I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
    I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
    Is there anyway I can find out the system requirements.

    Thanks
    I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

  • Rough Cut Editor for Final Cut Server

    Hi everyone,
    we are working on a Rough Cut Editor for Final Cut Server.
    I'd like to know what you think about it and put a short video about its usage on my site at
    http://www.andre-aulich.de/en/perm/consol-rough-cut-editor-video
    Any feedback would be very much appreciated!
    Regards,
    André

    Hi guys,
    in addition to getting in touch with you personally, I'd like to answer some questions in public:
    LAN vs WAN
    ==========
    The RCE in its current form is primarily built to be used in a LAN.
    This is because you need both the Final Cut Server client as well
    as the RCE client to connect to a central server using the ports
    3000, 80, 8821, and 8891.
    In addition, we currently suppose the Edit Proxy folder to be an
    edit-in-place device, so you need to open port 548 if you use AFP
    for that. We might change that, but you still need the FCSvr client
    to connect to your server.
    That said, we currently consider the RCE to be run in a local network.
    FEATURES
    ======
    We are not planning to build a server ingest app, as there are other guys
    building these kinds of apps.
    A standalone version of the RCE without Final Cut Server connectivity would
    be easy to write, yet, we like to use FCSvr's proxies for preview, as this way
    low bandwidth (meaning non-Fibre Channel) to the viewing stations is
    sufficient.
    So today there's the RCE in its current form...
    AVAILABILITY
    ===========
    We are doing our final testing and hope to release the app within
    the next two weeks.
    As we need to install some tools on a server and have a look at its
    environment, we would currently install the RCE ourselves, usually
    through a remote connection.
    Yet, we already consider having selected partners to implement the
    RCE as well.
    Currently there's no beta program being planned, as we do our
    testing at a customer site, where we hope to evaluate the app
    quite comprehensively.
    I hope that answers some questions.
    For more questions, please feel free to get in touch with me.
    André

  • What other programs are for Finale Cut Pro

    What other programs are for Finale Cut Pro?
    Like added transisions and such.

    Start out here where you'll find tons of top quality FREE plugins made by some very creative folks.
    http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
    The only "must-have" plugins I'd recommd are "Slice X" by CoreMelt, and "Nattress Levels & Curves" from Noise Industries (FX Factory).
    Everything else is just eye candy.
    I advise my students to not buy plugin until you actually need them for a paying job, and have that work pay for it.

  • Small Office Network Solution for Final Cut Server - Proxy Storage Etc.

    Hi,
    I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
    My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
    Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
    I hope this is a decent description of my situation, and would love some advice.
    Thanks Very Much,
    MacNomad

    Hi,
    I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
    My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
    Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
    I hope this is a decent description of my situation, and would love some advice.
    Thanks Very Much,
    MacNomad

  • WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

    Hello folks,
    I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
    When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
    Thanks for any suggestions,
    Kootenay

    Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
    So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
    Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

Maybe you are looking for