Where to buy new drives for Xserve RAID

I have been looking all over to buy NEW drives for my RAID. Can anyone direct me where to go to buy new drives with the slot attachment? 500GB or 750GB
Forgive my lack of specific/correct terminology - I am a newbie when it comes to the RAID.
Thanks in advance!
Brian

I think the fine print says DVD Player support requires 10.3 or higher. But you can still play DVDs in the original drive you have, and are looking to add a drive in the empty bay, right?
Also, Patchburn is available for 10.2 to add native burning support, or you can maybe find an old version of Toast (5 ?) for 10.2 that should allow you to burn to the drive.
http://patchburn.de/download.html
I agree with the suggestion to upgrade to 10.3 or 10.4, if you can, but you should be able to make this drive work in 10.2 (and still use the original for OS 9 and DVD Player) and decide to do the other upgrades later on if you want.
http://eshop.macsales.com/item/Pioneer/DVR112/

Similar Messages

Re: Satellite A210-16F: Where to get newer driver for graphic card??

Hi!
I have a Satellite A210-16F laptop with a Ati Mobility Radeon HD 2600 graphic card...
After checking my device manager i found out that my graphic drivers are from 2007 which can't be good :S but for the life of me i can't find the right drivers anywhere... if you check out the screenshot, you will see that the drivers are from 2007 and after i click on "update driver" and then "search automatically for updated driver software" it never finds anything and tells me that my drivers are up-to-date :SS Any help would be greatly appreciated!!!
Oh, also, my OS is Vista Home Premium (32-bit)
Thank you!
http://img269.imageshack.us/img269/3407/61265269.jpg

One solution for your problem is, that if you upgraded your OS to Windows 7, there's a new driver for Mobility Radeon 2000 Series (Catalyst 9.6) on the ATI/AMD driver page(that one with the OS selector etc..). It's states however, that these drivers are for 7's beta releases only, but if you install them even on regular Win7 system, they're working fine and after a while an update for them appears in Windows update(It should update to Catalyst 9.7). I run them almost a week without a problem and it even resolved my Mass Effect 2 crashing issue.
One problem remains though that the driver is only for Win7(when you select Vista, it's really annoying: "Please contact your device driver manufacturer..." for you.).
It's truly more annoying than sad, that Toshiba, although in the Win7 supported laptop models list states that P200/A200 series are supported, the only thing supported after all seems to be a bluetooth module(since only that one got a new driver). So far there was no problem with an old display driver for 2600, but recently the new Mass Effect 2 crashes almost randomly during loading stages(with error log in computer management stating that the faulting module is ATI(anything here), and I only expect more such errors/problems with new games to come, because almost 2 years old drivers! So I think guys in Toshiba software engineering should really wake up.

Where to add new drives for best speed

I've got a G4 here, and I want to add a 300GB drive for video scratch data - obviously I'd like everything to be as fast as possible.
My question is, the front drive bay has ATA buses labeled ATA33 and ATA66, which I'm assuming mean it uses the lower speed ATA. On the other hand, the higher speed bus (ATA100) already has the main system drive plugged into it. Which location for my new drive will get me the best performance, on the same cable with the other drive, (ATA100) or on a second cable (ATA66)?

Not everyone realizes that the MDD has native large (48-bit) support on both the ATA-4 and ATA-6 buses.
What you may want, though, is an ATA or SATA controller if you want to create a scratch RAID.
the ATA-4 (ATA/66) bus is about 4% slower than ATA/100. I'm not sure if you will see the 65MB/sec that your new drive is capable of. But that has nothing to do with being ATA/100/133 or ATA-6 or ATA-7.
You could use the 300GB drive as boot + scratch drive, using the ATA/100 bus, and keep /Users/account on ATA/66 drive bus. Otherwise, if you already keep OS/Apps only on startup drive, and have data and media files on another drive/bus, you might want to look into (S)ATA controller.
There is an article (sticky) on MacNN Forum, under PowerMac, that lists what Macs have native support for 48-bit etc., very useful. The QS/2002 was the first PMac to support >137GB drives too.

Repair Utility for xServe RAID?

We have an xServe with an attached RAID consisting of four 350 GB drives. The drives are set up as a RAID. Due to storms/hot weather (air conditioning failed) the server restarted and the RAID powered down. The xServe is fine but the RAID is not functioning. From RAID Admin the drives all show up and are OK but the array is not showing up. Is there any disk repair utility that would be useful on a RAID?
xServe RAID Mac OS X (10.4.6)
xServe RAID Mac OS X (10.4.6)

The fact that it's showing up as spares is a significant problem. The host won't recognize it until the RAID recognizes the array. There is no separate utility to help you with this, other than RAID Admin.
What firmware version is on the array? If it's 1.5, there's a "recognize array" option that you should try. If it's an older version, I'd tell you it would be nice if you could have gone back in time and upgraded the firmware. Since that's not possible, you should call AppleCare (assuming you have got APS&S for Xserve RAID, or the machine is < 1 year old) and inquire about your options.

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

Where is the new update for N95 US Versions?

Where is the new update for N95-3 and N95-4? i have this two phones and i fell disappoint and mad becuz i bought this expensive cellphone and we have no support from Nokia.. this is no fair we are consumers like any other in the world. And the european model of N95 has a lot of updates and we r exent of the updates and support.. thats no fair my cellphone cost a lot of money and no support? only one update for year?.. my cellphone N95-4 compared to the European model is a garbage. Because the European added many things with update.. like autorotate and improve speed.. im about not to buy another Nokia because we have no support !! Nokia set aside the American market.
THATS NO FAIR !!

Actually, it's the American market that set Nokia aside.
Nokia initially refused to allow network operators to customize their phones' firmware. Consequently, American network operators all but stopped buying Nokia phones. Nokia has since relented and does carry out a certain amount of trade in America now, but they're nowhere near as popular over there as they are elsewhere in the world.
Add their lower popularity in America to the fact that you all use different frequency bands from the rest of the world, which means a different set of hardware, and you begin to understand why the American market is a bit of a bugbear and why Americanised products are low priority. If American networks followed the same standards as elsewhere in the world you'd all benefit from the same updates.
Note that this is just personal speculation and not necessarily Nokia's official standpoint. I am not a Nokia employee.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Where can i download driver for my hp 15-r002ne?

where can i download driver for my hp 15-r002ne? support.hp.com shows "We were unable to find any drivers for your product. Drivers may be in development so please check back at a later date or visit the product homepage. "

Hi: Unfortunately, the support pages are not working for most of the newer HP PC's. It has been that way for about a day now. Since I am not employed by nor do I represent HP, I am not sure when they will have the pages working again. Check back again some other time. I know the problem has been reported, but I don't know how long this is going to take to fix. With the Independence Day holiday weekend in the USA, I would not expect this to be taken care of immediately.

Can i buy new battery for my macBook pro in egypt ?

can i buy new battery for my macBook pro in egypt ?
and where i find it ? and how much

Here are the International Apple support telephone numbers:
http://support.apple.com/kb/he57
I note Egypt is not listed.
Purchasing a battery from a third party vendor is a high risk proposition. Many such batteries have been found to be substandard.
I suggest that you try and contact Apple and see if you can have one shipped to you.
Ciao.

Where to buy touch screen for Sony xperia z1

where to buy touch screen for Sony xperia z1
Hello Help me!
Faced with the problem of maintenance.
I busted my phone touch screen. And I do it or who can not be repaired.
Tell me where to order and buy (delivered to Krasnoyarsk in Russia) touch screen on the Sony Xperia Z1????

We do not sell the individual components of our handsets to prevent unauthorised repairs of our handsets as this could lead to further damage of the device, voiding of warranty and even personal injury if the handset is not repaired correctly. With this being the case I would advise you to contact your local Xperia Care team to have this arranged for repair by an authorised repair agent.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

http://www.nvidia.com/object/7seriestechspecs.html
Pls visit above nVIDIA web page.
based on NVIDIA web pages, 7900GTX supports MAC OS X.
but .....seems not so far.

How can i buy new battery for my macBook pro in France

Hello,
Please, someone can tell me how to find and buy new battery for my 2008 macBook pro in France ?
This one is very old, i already changed this battery one time, i think Apple store of town won't be ok to make the work cause i have made it myself one time before (it has fallen several times, almost broken, means impossible to shut the battery place but still working on). So i bought a battery to a third provider, wich doesn't work of course, try to ask to online assistance but i have to pay 30 € just to ask my question and i doesn't want...
SO WHAT IS THE SOLUTION TO CHANGE MY BATTERY ??? HELP !!!
I bought it in 2008. I don't know exactly the serie. Just know it's a 2,4 GHZ Intel Core 2 Duo.
The reference of battery is A1281 10,8V 50 Wh. Can't find it on the store. The only one i found was on a website who didn't tell it's was a fake...
Lost 85 €

Here are the International Apple support telephone numbers:
http://support.apple.com/kb/he57
I note Egypt is not listed.
Purchasing a battery from a third party vendor is a high risk proposition. Many such batteries have been found to be substandard.
I suggest that you try and contact Apple and see if you can have one shipped to you.
Ciao.

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.

Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HT1338 Why doesn't "Software Update" show me the new driver for the Epson 50C20D (Artisan 800) while It is on the list of available new driver?

Since I upgraded to mountain lion, my Artisan printer stopped working. After talking to Epson and trying all kind of things, it was determined its definitely a driver problem. The PC ping the printer well but won;t print to it as it think its not connected (when it is as priven by the ping).
The new driver for Epson 50C20D are on the list of update available drivers on the OS X wen site yet trigering "Software Update" does does detect I need it... Why is that? Thanks

Thanks Mende1. The printer is there and installed allright. Even shows as "idle" until I try to print to it. The driver version shows 6.36 and I ned to update to 9 which is only avail from the App store... However, the app store don't detect I need it..

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
Name : Seagate Backup+ BL Media
          Type :           Disk
          Partition Map Scheme :           Master Boot Record
          Disk Identifier :           disk1
          Media Name :           Seagate Backup+ BL Media
          Media Type :           Generic
          Connection Bus :           USB
          USB Serial Number :           NA5B83S2
          Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
          Writable :           Yes
          Ejectable :           Yes
          Location :           External
          Total Capacity :           1 TB (10,00,20,48,85,504 Bytes)
          Disk Number :           1
          Partition Number :           0
          S.M.A.R.T. Status :           Not Supported

Seagate website.
Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive.

Unable to install new driver for Quadro 4000

Hello
downloaded the new version 304.00.05f05 for quadro 4000. unable to install the new driver for NVIDIA Quadro 4000.
By clicking on the DMG I get a message "high-os-title high-os-message superimposed on the installer window
old NVIDIA driver already installed ; CUDA updated automatically to version 5.0.45
OS : Mountain lion
anywhere button activated in security window
Please help

Try downloading the update again. Perhaps the one you have got corrupted during the download process.
You can install updates in the Safe Mode and it should eliminate the possibility of other software interfering with the update process.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem.
Safe Mode
Safe Mode - About

Where to buy new drives for Xserve RAID

Similar Messages

Maybe you are looking for