Where to change encoding setting?

Here are my custom encoding settings for video: 03.06.2015-17.27.37 - HOLLY_HOUSE's library
I wish to change bitrate encoding from VBR1 to VBR2. I'm sure it's possible but I can't find where to do that. Can you direct me there?
thanks in advance!

BillyDBrown
This is a duplicate question which has already been answered in your other thread.
how to access editing of a publishing preset
What you were seeking was the Bitrate Settings/VBR, 2 pass in Premiere Elements 12/12.1 for
Publish+Share/Computer/AVCHD with what appears to be Presets = MP4 - H.264 1920 x 1080p30.
That setting was found under the Advanced Button/Video Tab of the preset.
In Premiere Elements 13/13.1, Bitrate Settings/VBR, 2 pass is not offered.
ATR

Similar Messages

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Trying to put two video onto 1 disc, change encoder setting problems

Video tape two differ events, trying to put them on same disc. First project in imovie on my MacBook Pro. was short (1min. 27sec.) the
Second project was long 184.31 (med) Dimensions 640x360 size 2.3 GB (This is what it display for the long movie) These video wasn't done in HD.
When trying to put them on same disc (standard Disc 4.7 GB) I get this message: Your project exceeds the max. content duration. To burn your DVD, change the encoder setting in the Project Infro window. I try to put the long one by it self onto a disc still get the same message. Heip please

Update: I just made sure that the AP's go through the main router (AEBS) and do not talk to each other directly (which is what they were trying to). I managed to restrict access to them so that only that AEBS (and the other computers through the AEBS, not directly) talks to them. After this everything was smooth sailing.

Unicode Supports, change encoding setting

hello
I want to know how can I use Unicode supports. when I type activities as local language (farsi) after scheduling i can't see the original characters. i see unknown characters (????? ???? ??? ????????).
I added URIEncoding="UTF-8" parameter in connector setting and i change font in Primavera web access. but i didn't see any improvement.

BillyDBrown
This is a duplicate question which has already been answered in your other thread.
how to access editing of a publishing preset
What you were seeking was the Bitrate Settings/VBR, 2 pass in Premiere Elements 12/12.1 for
Publish+Share/Computer/AVCHD with what appears to be Presets = MP4 - H.264 1920 x 1080p30.
That setting was found under the Advanced Button/Video Tab of the preset.
In Premiere Elements 13/13.1, Bitrate Settings/VBR, 2 pass is not offered.
ATR

I inadvertedly changed a setting where the top of my screen no longer shows the apple logo in the top left or the clock and wifi status and strength on the top of the screen, how can I get it to show both of these things again like it used to?

I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen. When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again. So I was wondering how can I get it to revert back to the way it used to be? I hope this isnt confusing.

I tried the zoom thing but it still didnt resolve my issue Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar. Anyone else have any ideas of what I did to mess this up?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Links no longer clickable in emails can't find where to change setting

I changed a Firefox setting several months ago that no longer allows me to click and open the link in on that tab. I now have to right click and open link in a new tab. I cannot find anywhere to change the setting back. I find no settings for links. Where can I change the setting back so that I can click and open links without going to another tab?

Update:the "use hardware acceleration when available" line was NOT checked when I looked at that. I switched to the default theme. When I'm looking at the Extensions under ad ons mgr tab, the only ad ons I have are- Adblock Plus 2.0.3 and Adblock Plus Pop-Up 0.3. I looked at each of those and nothing pertaining to links there. REMINDER: Links became unclickable in their original window only after I choose that option somewhere (I wish I could remember). Is it possible that that option was provided in my AVG settings and not Firefox? Disabling both Adblock Plus and Adblock Plus PopUp allowed links to open in original window. Enabling Adblock Plus disallowed links to open in original window. Disabled Adblock Plus and enabled Adblock Plus PopUp and links open in original windows again. I don't see any settings pertaining to links when I look at the page that comes up for more info on Adblock Plus nor are there any updates. I see no place else to check for settings for Adblock Plus. Is there anywhere to check for all settings for Adblock Plus or what is my next step?

I just got a retro clock from brookstone and in setting it up it asked if I want to use current location which is incorrectly "Buffalo" but I do not know how to change it. Can anyone help me find where to change location?

I just got a retro clock from brookstone and in setting it up it asked if I want to use current location which is incorrectly "Buffalo" but I do not know how to change it. Can anyone help me find where to change location?

As I understand it, Apple gets your location from the wi-fi router to which your iPod is connected. Location Services identifies the router and then checks for its location in Apple's database. If the router has been recently relocated or if there is a glitch in Apple's database, you will get an incorrect location. I don't think that there is anything you can do about it. You could send Apple a message about the error, but I doubt if they would do anything about it.

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Hi Sara,
The problem is every time I try to copy a page from a website or attachment sent to me or anything that I don't create, the dialog box says I have to save it before I can print -- there are no other options on the dialog box. Very frustrating -- one of the girls in my office is having the same problem and we can't find a way around it.
Hope you can help
Thanks
Carol Laskos
"Sara.Forsberg" <[email protected]> wrote:
Sara.Forsberg created the discussion
"Where do I find the printer dialog box to change the setting that asks me to save a file before printing"
To view the discussion, visit: https://forums.adobe.com/message/7070517#7070517
>

I changed a setting and now my nano only plays one song at a time over and over again. What and Where to I need to change

I must have changed a setting because the nano will only play one song and then repeat the one song. How do I change it back so it will play all the songs on the list?

Sounds like you turned on the repeat single song feature.
Go to now playing, then swipe right to left to get to the second screen. At this second screen you will see three icons. The one on the left looks like a loop and I am going to guess that there is a little "1" there on the loop. Hit that button until the 1 goes away. You will be able to find all this info in the online documentation for the Nano. That planb linked to above.
i

WHERE DO i CHANGE SECUTIRY SETTING FROM HIGH TO MEDIUM?

My banker said the security setting was too high and that was why Firefox said the site was not secure. How do I change the setting?

Are you getting an "Untrusted Connection" error when you try to go to your bank website? [[This connection is untrusted|This connection is untrusted]] shows you how to remove the warning, and what it means.

Viewing Chinese Characters / Encoding setting in SQL Developer

Hi all,
I am new to SQL Developer 1.1. I have just downloaded the tool yesterday.
I have a table where there "should" be chinese characters in a NVARCHAR2 column. But I see only inverted question marks when displaying that data in SQL Developer.
I know from a ressource on the web, that SQL Developer is able to display chinese characters ( see http://awads.net/wp/2006/07/06/sql-developer-and-utf8/ ).
The NLS_NCHAR_CHARACTERSET is set to AL16UTF16; the NLS_CHARACTER_SET is set to WE8ISO8859P1.
The encoding under Tools->Preferences->Environment is set to "Cp1252".
What is actually the influence of this Encoding setting and do I have to make changes to that to view the data?
In addition I have to admit, that we actually do not really know if the data entered the DB correctly, that is as chinese characters. Maybe there have occured conversion errors that were made in a application that writes the data into the database. Actually I want to verify that. So, if I have the right settings configured which should be fine to see chinese characters and then I see only inverted question marks I can conclude that the data actually entered the database corrupted and the error is not an display issue with SQL Developer but rather an error in the application that writes the data to the database.
Thanks to any answers in advance!
Regards,
Philipp Hinnah

Hi,
Am able to view chinese characters in VARCHAR2, FUNCTIONS & PROCEDURES.
My Settings are :
1. Developer encoding is X-ORACLE-AL32UTF8.
2. Control Panel :
   Regional& Language Options:
            Standard & Format = English (US)
            Location                 = US
            Under Advanced = China (PRC)
        System :
            Environmental Varaibles
              Variable Name = NLS_LANG
              Variable Value = SIMPLIFIED CHINESE_CHINA.ZHS16GBK 3. Windows Registry for oracle's NLS_LANG all using
SIMPLIFIED CHINESE_CHINA.ZHS16GBK.
4. Oracle database when creating using SIMPLIFIED CHINESE_CHINA.ZHS16GBK
and AL32UTF8.
HTH
Zack

Which encoder setting do i use to NOT encode any imported tracks?

I'd like to re-import my entire library, but i am worried that the encoder setting in preferences will re-encode everything to one file type, such as mp3 or aiff. How do i tell itunes to leave all of my file types alone?

The encoder settings only apply to audio CDs which you import - the assumption is that you don't want to take up disk space with the large files of a CD, but you can set it to AIFF (it looks as if audio CDs contain AIFF files when you open them but this is an illusion: the format is specific to CDs* so they still have to be converted if you want uncompressed AIFFs).
Any prexisting files which you drop into iTunes remain in the format they were in in the first place.
If you are re-importing your audio CDs I should do so as AIFF so that they are uncompressed: you can then change the import settings to MP3 or AAc or whatever, and then select the files and choose 'Create MP3 (or AAC) version' to make a copy in your desired format., and subsequently delete the originals.
(*Solomon-Reed cross-interleave if you really want to know - the data is jumbled up and has strong error correction so that it can survive scratches and other minor surface damage: the same is not true of data CDs containing for example MP3 files, where one scratch can bork the entire file.)

HT1918 I am unable to locate where to change the phone number that is associated with my itunes account.

I am unable to locate where to change the phone number that is associated with my itunes account. I have a new number and the old number is no longer accessible by me. I've logged into my iTunes acct and it seems I can only change my appleID itself, my billing address info, and password and things like that. I cannot find where to remove a number and add a new one. I've gone to my mobile devices (iphone, ipad) as well as my mac and I'm getting a bit frustrated with it. I'm sure there's a simple solution and I'm just missing it. Going to settings>messages>send&receive....there is the old number and no option to make a correction. I've unchecked it but why can't I add the new number? On my iphone the ONLY option that shows up is my current number but when I set up my new ipad I have the issue described here. I want this number completely removed from my account there has to be a way to get it out of the system.
Also when going to settings>facetime>you can be reached at: shows email addresses as well as the OLD phone number with no option to make the correction, remove the incorrect number, or add a new number. I figured this was tied in to my appleID since thats when it showed up (right when I signed in on my ipad). So I went to itunes on my mac and went to my account and there I find AppleID Summary, itunes in the cloud, purchase history, and settings. I've gone through each of those and am still unable to figure out where to change it. Somebody PLEASE tell me where to find this data so I can change it. I've seen multiple inquiries about this all over the internet but everyone's solution is to do exactly what I've already done. No resolution to the real issue.

Apple will have it, but if there is ever a question/problem, the store that you made the exchange at will have it on record.
But if you're worried about it call 800-APL-CARE and see if they have it.

Where to change encoding setting?

Similar Messages

Maybe you are looking for