Where to check the "SAP Notes" -- Is it in search only or some where ?

Hi All
   I am having doubt : where to search the SAP NOTES ?
Is it in :go to -
> sdn.sap.com
               In search -
> Enter the given code number ( Ex: 801868)
It is again giving so many links based on this but i am not getting the exact
answer   ...!!!!1
Help me on : " how to search the Exact SAP Note number "
thanks
kiran LVS

check in <a href="http://service.sap.com">http://service.sap.com</a> or check directly in <a href="https://websmp101.sap-ag.de/notes">https://websmp101.sap-ag.de/notes</a>
Ps: Award points to helpful replies.
Message was edited by:
Prabhu S

Similar Messages

From where to read the SAP note

Hi,
Many times it advise from some ref. to read SAP Note xxxxxxxx, but from where to read this note if we know the note number.
regards,
zafar

Dear,
You have to create Suser ID to view the SAP notes.
Ask your company to provide Suser ID..
You can see the same in the website https://websmp106.sap-ag.de/support
Regards
Utsav

Is the SAP note (old, 2001 year) valid?

Hi!
I am trying to create source system in BW to connect from BW-system to SAP source system. I can connect to SAP system but when I click on use (RFC connection) I get message "Error during insert in port table". I found SAP note with number 110849 but it is was released in 2001 year. I work with Netweaver 7.0. Can I use this note to correct error?
Thanks,
Olga

Olga,
There is another alternative solution here which does not require transaction SNOTE usage - go to SAP Service Marketplace, open the required SAP Note and check section "Affected Releases", where you will be able to find out information on software components' release versions which are affected. Just find out if the one which you use is in the list - if not, then the SAP Note is not applicable for your system. The second step in case the first one is passed and you found your release version in the list of affected releases is to verify Support Package level: ensure that Support Package which delivers the correction for this software component hasn't yet been implemented in your system (if it or higher Support Packages are implemented, then you should already have the correction applied in your system).
My regards,
Vadim

Issue in implementing the sap note 1401975

Hi All,
I am trying to implement the sap note 1401975 in the 4.7 version( SAP_APPL 470, Patch level 26). to implement this note i have to create a Function Module with export parameter of TYPE SEPA_STR_DATA_MANDATE_DATA. the problem here is the structure SEPA_STR_DATA_MANDATE_DATA not available in my system and no instructions are given in the note to create this structure. i have also implemented the prerequisite notes 1305012, 1360908.
your Quick response will be highly appreciated.

Reason and Prerequisites
As a prerequisite, you require Noter 1090321 for SEPA Direct Debit and the two SEPA credit transfer Notes 1305012 and 1360908. Check whether these notes have already been implemented (search in the ABAP Dictionary (transaction SE11) for the structures FPAYHX_MDT and FPM_SEPA and check in transaction SE37 whether the function DMEE_EXIT_SEPA_21 already exists) and implement them if necessary.
To be able to use the B2B (Business to Business) function, you also require enhancements in the SEPA third-party management (SAP Basis) that are delivered in a separate note.
Check this prerequisite notes 1090321, 1305012 and 1360908 and its corrections present in your system
Edited by: praveen reddy on Feb 1, 2011 2:47 PM

In iphoto how to get the gold you delete a photo warning message when you check the box not ask

in iphoto how to get the gold you delete a photo warning message when you check the box not ask

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Despite checking the "Do not import suspected duplicates" box, my Lr4 still did re-import hundreds of photos. Anyone know how to avoid that?

Despite checking the "Do not import suspected duplicates"box, Lr4 still did re-import hundreds of photos from the same exact card they were imported from originally. Anyone know what I should do differently next time?

The problem with duplicate detection is that, as far as I can tell, Lightroom is using details it discovers about the file being imported (examining EXIF data and file stats) and what is already in the catalog. Unless it finds an exact match for all parameters, the file is not considered a duplicate. From my own experience, if Lightroom decides a file is a duplicate it is nearly always correct. However, when it misses, it really misses. I have not read anywhere that Lightroom is building and storing a hash count which would make the process more accurate. I also suspect that the search for duplicates is when you are importing a set of photos from one location (a memory card for example) and storing them into the same folder all the time. So, if you take a memory card and import all the photos into Folder_X and then later try and import the same photos into Folder_X again, Lightroom will catch that they are duplicates. But, if you were to import that same group of photos into Folder_Y, Lightroom will not catch it indicating the comparison is not catalog wide. I am not sure how to influence this behavior and it is not anything you did wrong or failed to do. It just is the way it is...

I'm trying to execute the file sqlplus /nolog @statistics.txt sapuser as per the sap note 0001020260 ihow can i find the sapuser

i'm trying to execute the file sqlplus /nolog @statistics.txt <sapuser> as per the sap note 0001020260 ihow can i find the sapuser

KANNAN VENKATACHALAM wrote:
brconnect -u / -c -f stats -t all -- what it will do exactly ?
Would you mind to read the BR*Tools documentation?
it is located on the oracle community (same place as this forum) it is quite a big document.
AFTER you have read it, if you have any problem understanding what that command does exactly you are welcome to ask again

Let me know link to JDI ESS Cookbook from the SAP-Note: 872892

Hi,
Can anyone plz let me know to download the JDI ESS Cookbook from the SAP-Note: 872892 from market place. Its urgent.
Thanks in advance.
Raj.

Hi Lohitha,
Can u give plz provide me any step by step document or assistance is customizing Web Dynpro ESS in DTR perspective. Previoulsy I haven't worked on customizing the ESS package.
Right now, I am working on EP7 sandbox.
Appreciate, if u can explain or provide any doc on working in DTR perspective.

Installing the update to InDesign CC 2014 it only gets to where it says "Finishing," hung up at this point for a week or more. What now?

Installing the update to InDesign CC 2014 it only gets to where it says "Finishing," hung up at this point for a week or more. What now? In the CC Activity Stream it is not listed as a program I have updated, so I am sure it did not finish. If it is stable as is I do not have to upgrade at this point -- just started an important project and stability is my biggest concern. But I do want to know how to complete installing this upgrade.
Thanks,
Jackie

Nobody can tell you anything without proper system info or other technical details.
Mylenium

How to check the OSS note in SAP Client system ?

Hi all
I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
Please let me know..
Thanks
Mallikarjun

Hi
1) One way is checking the version and support pack applied.I.e,
On the main SAP screen > Systems > Status > Check details of the "Component version".
2) STMS > Double click on the system you need to check > Check the status of your request.
Nadini

Where Clause in the block not executed

I have this in the where clause in my block, I want to exclude managers. I have added a flag column IS_MGR to prs_employee_profile and I added this line to query(where IS_MGR <> 2) “ value 2 for true” and but it doesn’t work. prs_amp_profile is the emp table and this block is based on atn_emp_week , emp_id is a foreign key. all the conditions are working except for the one i added and it is still bring the records for the managers. Any body can tell me why the condition is not being forced.
Original Where Clause
1=1 AND (emp_id in (select id from prs_employee_profile where
dpt_id in (select dept_id from prs_user_dept_priv where user_id = :global.usr)
and emp_id = decode(:global.emp_user_flag, 1, id, :global.emp_id)
and emp_sts_id in (select id from prs_employment_status where active_flag <> 0))
OR :GLOBAL.GRP='ATN_ADM')
After adding
1=1 AND (emp_id in (select id from prs_employee_profile where IS_MGR <>2
And dpt_id in (select dept_id from prs_user_dept_priv where user_id = :global.usr)
and emp_id = decode(:global.emp_user_flag, 1, id, :global.emp_id)
and emp_sts_id in (select id from prs_employment_status where active_flag <> 0))
OR :GLOBAL.GRP='ATN_ADM')

     1=1
AND (    emp_id in (select id
                      from prs_employee_profile
                     where IS_MGR!=2
                       And dpt_id in (select dept_id
                                        from prs_user_dept_priv
                                       where user_id = :global.usr
                       and emp_id = decode(:global.emp_user_flag, 1, id, :global.emp_id)
                       and emp_sts_id in (select id
                                            from prs_employment_status
                                           where active_flag!=0)
      OR :GLOBAL.GRP='ATN_ADM'
    )I don't know your table-structures, one possibility would be that :GLOBAL.GRP is ATN_ADM at testing for this overwrites the other conditions.
I would try to check the condition in sql*plus, apply it to the block when its working.

Where we check the Project closing status?T.code for List of Closing Projec

Dear Guru's,
Where can we check the Project closing status? Can we change the closing status if want to do some modification, and what is the transaction code that we to view the list of closing project.
Regards,
Kalyan

1.You can find the project status ( all the status ) in any project maintenance transaction for ex. Run Cj20n > Open you project> on the basic data tab you will find the project status.
( If you want to see the status of other PS oject than click on that object, similarly you will get the status of that object on Basic data tab. )
2.Yes you can change the closing status of proejct for midification. path is clickon the object for which you want to change the closed object > Edit> Status--> Close --> Undo.
3.For the list of Project status go to CN41
on the projectno. input line click on multiple selection--> give the proejct no. list for which you wanted to see the status. -->enter --> Excute.
Report will open in screen. in that report go to toolbar and click on 'choose filed' button.(F5) -->one pop up window will open -->right handside scroll down in that window >select 'status' field and move it to left side>enter
project status will be shown against you project list. you can verify the same in maintenance txn.
If you have activated user status the same will also get populated.
You can downlaod the same in Excle file path is : Evaluation menu>export>save to file. ( via filtering in Excle you call do all the analysis realted to project status how amny are in clised status etc. )
Regards
Nitin

Where to check the user id that who deleted the process chain

Dear Gurus,
If the process chain is deleted accidentally, can we check the user id used to delete. Where can we see the logs/information about that.
Regards
Ram

Hi Ram,
When you delete something in BW/BI, a background job is assigned to the requested task.
To check the same use Tcode SM37, provide details: Job name as BI_DEL*, user name as *, Job status as Finished, and the date or date range in which the process chaing was deleted. Then execute the request.
It will show you all the jobs which were used to delete something in the BW/BI.
Check the log of the request and you will get the required information.
Cheers...
Puneesh

Where to Download the SAP Memory Analyzer

Hi,
I atended into the SAP Memory Analyzer presentation on the TechDay and it seemed to be a Free Tool but When I go into the link to Download it it says that it has a 90 day License and that it can not be used in production, does somebody knows what happened?
Thanks in Advanced!!!
Kind Regards,
Gerardo J

Hi Pavel,
you may either use the standalone version of MAT to analyze Heapdumps (Eclipse Memory Analyzer Open Source Project) or install Eclipse IDE, then Perspectives "SAP JVM Profiler" from SAP Service Marketplace ("Browse Catalog...">"SAP JVM Supportability Tools"...) and then Perspective "Memory Analyzer" from http://download.eclipse.org/mat/1.4/update-site/ to have some combined tool, see example screenshot from documentation of SAP JVM Profiler:.
Best regards,
Hakim

Where to download the sap server on linux for system-Z

hi all,
could u plz give me the link from where i cud download the SAP application server on linux for system-Z..
thanx in advance
regards
Alamelu

alamelu01 pb wrote:>
> hi,
>
> is this the only site where i can get the SAP application server software?
Yes
> also is it available as a free download?
No. To download AND use SAP software you need to have a valid contract with SAP and pay for the license as well as a yearly maintenance.
Markus

Where to check the "SAP Notes" -- Is it in search only or some where ?

Similar Messages

Maybe you are looking for