Where to configure Tax categories for tax related Condition types

Hi all,
Could you pls let me know Where to configure Tax categories for tax relevant Condition types. (any tcode for this)
When we are creating condition records for tax relevant condition types then you have to assign tax classification for customer and tax classification for material....i am providing 1 and 1 for customer and material as well.....then assigning tax code....when trying to save this doc.... system throwing this error....Tax indicator 1 is not defined for use with condition type O012. This means for 1 we can't find tax categories maintained.
Please look into this and your help would be appreciable.....
Thanks in advance....regards.....Diwakaran......

Hi,
1. First you need to create condition type eg : ZCST in V/06 by copying standard condition type for taxes MWST for output taxes.
2. you need to assign this condition type to country eg:IN in OVK1 T-Code.
3. Next you need to define Tax classification for customer eg : 1 in OVK3 T-Code and assign it to tax category (condition type : ZCST)
4. Next you need to define Tax classification for material eg : 1 in OVK4 T-Code and assign it to tax category (condition type : ZCST)
5. Maintain this tax classification in XD01 & MM01 T-Codes.
Regards,
Dippy

Similar Messages

Free Goods related Condition Types

Hi All,
I actually searched Google and the SDN forums if this was already asked but could not locate. Therefore, I am asking this now.
1. Does someone have a Category-wise list of Condition types such as Condition types that fall under Discounts, Freight, Taxes, Surcharges, etc.,
OR
2. Does someone have a list of FREE GOODS related Condition types?
Some that I can think of are:
R100
NRAB
TIA,
Raj (SAP SD_Newbie)

HI Raj,
You can get all this details from Table: T685A
retireve the cond types wrt: COndition class & condition category based on your choice.
Please provide your requirement, if you are looking other than this.
Regards,
Reazuddin MD

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

How to set required for group of condition type in the same condition class

Hello,
we have a group of condition type with the same condition class B, the last one have been set, and all of others will be inactive.
but we don't set any required for all the condition types in pricing control, so if user don't set any of them, the sales order or billing is still saved. that is a risk.How can i fix it? Thanks.
Sophie

Hello,
incompletion log is not available in invoices.
You have different options:
- activate a validation in FI when the Billing document is released into accounting, so that te release into accounting is not allowed if the invoice amount is zero;
- define a subtotal in the pricing procedure as sum of the pricing conditions of your group, then develop a custom routine to be assigned in the formula "CalType" (field T683S-KOFRM) where an error should be raised if the amount of the subtotal is zero (use as an example formula 48);
Best regards,
Andrea

To write&activate new Requirement for customr discount condition type k007

Hi Guru's,
how to write and activate new Requirement for customer discount condition type K007 in VOFM.
could please guide me step by step process or if you have any programming language related to this please provide me that would be helpfull to me...
please let me know if my question is not clear..
Thanks in advance and will give full points...
Srinivas.

Hi S,
u can use options condition value, condition based values for this requirement.
1.all Z requirements starts from 9xx onwards ,
2.u need to use Internal tables KOMP in that requirements based on the given conditions.
3. Dont active all , select only new requirement->Edit->Active.
ref any standard requirement for sample codes.
regards
Prabhu

Material related condition types

hello mm gurus,
I have created a material and I want to maintain condition records for that material through MEK1
but there are so many condition types. I want to maintain the condition types which are related to material
please explain me briefly
thanks in advance
bye

Hi Subramanyam
it totally depends on you what condition records you want and for which condition types. for all the condition types for which access sequence is assigned you can create condition records and choose proper key combination "material/vendor" and enter your desirable price which you want to be picked up by the system at the time of PO creation.
regards
Yogesh

How to change exchange rate type for specific pricing condition type

Hello every one,
I have a requirement for billing ie VF01.
currently all the exchange rate are being calculated with exchange rate type 'M' by default.
but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
Please any body can help me with the exit and code which i can use.
I have checked exits SDVFX008.
but how to change exchange rate with type 'E' only for two conditions.
as changing exchange rate at document header will change exchange rate for all condition type.

You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
Link to refer for selective runtime analysis - Runtime Analysis for VOFM
Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

We look now for a suitable condition type "deposit for loaned packaging"

Hi,
Following is my client reuirement,
We buy a lot of raw materials in loaned packaging (drums or IBC). The
vendors are invoicing the packaging as an extra item on their invoice.
Weeks or months later when we return the packaging to them we get a
credit note.
We look now for a suitable condition type "deposit for loaned packaging"
which refers to account 631010 and we can use in the purchase order.
Can you create such a type ?
Please any one tell me whether it is possible? If yes, then which way?
Regards,

Hi Ajinkya1788 ,
you can use a condition like FRB1 with a provision account key for your 631010
or set up a valuation class to determine that account.
You might want to check empties management documentation in help.sap.com
best regards,
Edgar

Sales order Pricing for a particular condition type

Hi Folks,
I have a requirement that when i change the Shipping condition(VBAK-VSBED) in the Sales order The Pricing should be triggered and the price should be re-determined only for a particular condition type (ZFM1) . This condition type represents Freight charges.
I am trying to use user exit USEREXIT_NEW_PRICING_VBAP(include MV45AFZB) in the below fashion but the price is getting
re-determine for all the condition types. I have even tried by passing NEW_PRICING = 'H' but we have multiple condition types for freight and price would get re-determined for all these condition types. I want the price should get refreshed only for condition type ZFM1.
FORM USEREXIT_NEW_PRICING_VBAP CHANGING NEW_PRICING.
   IF VBAK-VSBED NE *VBAK-VSBED
      New_Pricing = 'B'.
   ENDIF.
ENDFORM..
So, do we have any function module which i can use to refresh only a specific condition type.
<Priority normalized by moderator>
Edited by: Vinod Kumar on Nov 3, 2011 1:35 PM

Hi
It's hardcoded. Go to include FV45PF0P_PREISFINDUNG and you can see when the userexit is called and how the report call other subroutine:
          perform userexit_new_pricing_vbap(sapmv45a)
                  changing da_pricing.
          if not da_pricing is initial.
             if da_pricing ne function_new_pricing.
                perform preisfindung using da_pricing.
             endif.
          endif.
In subroutine PREISFINDUNG is called the FM 'PRICING' with the value for DA_PRICING for CALCULATION_TYPE.
Regards
Eduardo

Where to Configure the Price for the UoM Conversion

Hi All,
I have a requirment from my client here that he wants to change the UoM of the material at the billin document level. The UoM can be changed but I realized once it is changed the price has gone all wrong. Where can I configure the price for the UoM conversion because I cannot find it anywhere in SD itself.
Appreciate all of your inputs.
Thanks a lot!

Hi Prashant,
I am trying to maintain the same material with different UoM but when I do so it says that the current condition is being processed at the current session. I guessed it meant that the conditiont record for that material type already exists?
How do I rectify this problem because when I enter the new line of material with the new UoM disappears.
Appreciate your input in this,
Thanks a lot!
Edited by: Yvonne Lee Sook Fun on Jun 16, 2009 4:32 AM

Where to configure retention period for document type ?

Hi Experts,
In SAP DMS, once we set a Retention period, after that period document can be deleted or archived automatically.
can anybody tell me , where to configure this retention period and how document gets archived or deleted after this period.
Kind Regards,
Sunil

Supplementing Senthil's inputs, you may also explore setting the deletion indicator on for the DIR's you no longer wish to retain prior to running the z-program.This can be achieved by adding the function module DMS_PROC_DOC_DELETE in the "Start processing" node.(SPRO > CA Components > DMS > General Data > 'Start Processing for Documents').
On enabling this FM, in CV04n results screen, use the button 'Process' to set the Mass Deletion indicator on for relevant DIR's. You may then run the deletion program in the background for the above selected DIR's.
Hope this helps.
Regards,
Pradeepkumar Haragoldavar
Edited by: Pradeepkumar Haragoldavar on Aug 24, 2010 5:55 AM

Suppress standard Tax procedure for tax returned from external tax server

Hi All,
We are facing an issue after implementing the external tax engine called CTE.
In some scenarios, when CTE is returning reverse charge lines, we are passing the same lines into the BAPI for posting.
Ex: We can clearly see that two reverse charge lines (input and output taxes) being returned by CTE.
Now, we pass the tax lines into the BAPI for posting. We get the following:
We can clearly see that apart from the tax lines which have been sent by CTE, we also get two additional lines having +-1000 as amount.
Now, we tried to post the document without passing the tax lines into BAPI and we get,
The additional lines are still there. Thus, I came to the conclusion that these tax lines are being added by SAP standard tax procedure as tax calculation.
Now, since we have already calculated tax using CTE (for some cases specially reverse charge scenario), we do not need SAP standard tax procedure to calculate tax again and add new tax lines to the posted document.
Thus, our main objective is to suppress the standard tax procedure ( like TAXAT, TAXGB, etc) or few of the cases.
We tried to analyze from our end but still could not reach a solution for the same.
Is there any way or any indicator which you can use to suppress the standard tax procedure in case we are using CTE to calculate tax?
Please help.
Regards,
Saurabh.

Hi
You can create and use a new tax code which is applicable only for Delivery charge cases.
Use a new pricing condition type for this Tax .and condition records with access sequence and tax code can be amintianed only for this condition type.
You will have to modify pricing procedure for the same.
Depending on condition records and document inputs the tax values for delivery will get triggered.
You can also put an order reason in Accounting determination access sequence through which on This special sales ,
account determiantion can be changed.
hope this helps
Regards
Mandar

Problem in Tax Exexpiton for Newly created Wage type

Dear Gurus,
I Have tried to create a New Wage type for Allowance with Exemption IT582 created Amount. In pay roll results the IT582 Exemption amount is coming. In Wage type /132 Monthly Exemptions it says the Entire Amount which it created for the Particular wage type.
Example:
Newly created wage type 1010 : 10,000
Exemption Created : 6000
Payroll Results:
/132 : showing 10,000+800 Conveyance
MCAX : 6000 - Custom Allowance
MCMX :6000 - Custom Allowance.
By the above result the Gross value reduced to -10,000.
Please suggest me to complete this process.
Thanks in Advanc.
Anbu.

Hi Anbu,
I am lil bit confused abt the explanation u had given. anyway i will explain the configuration n step u need to perform-
configure a wage type in V_T7INA9 and V_T7INT9 view first.
maintain the amount, which employee has submitted as claim.
then pass the value in infotype 8 or 14 or 15 through the same wage type u have configure.
now minimum of 3(entry in V-T7INT9, infotype 8 or 15 or 14 and entry maintained in infotype 582) will b the exemption amount.
Regards,
Praveen
Edited by: Praveen-Sapping in SAP World on Mar 26, 2009 10:11 PM

Tax Code in Billing Document Condition Type

Hi Experts,
We have found a below issue in our system, could you please guide me if you have any inputs:
Case1:
When a Billing document is generate for a condition type ZABC ( Discount Condition Type) which is manually entered in the order ,it has the tax code populated.
This can be seen in the condition type display in Billing document and in the accounting document generated.
I have not maintained any condition record for this condition type.
Case 2:
I have a similar condition type Z123 ( again Discount condition type) though for a different pricing procedure but for this
tax code is not populated. No condition record is maintained for this too, it is manually entered.
It can not bee seen against this condition type in Accounting document.
I have compared and check if there is any routine and also the properties of both the condition types.
Also i have checked the copy control.
When I debug it , I see that tax code is fetched from KOMV table.
My Questions:
Is KOMV table updated even if the condition type is entered manually?
From where does the tax code appear in Billing document for a condition type?
Please help me or guide me where to check on this.
Thanks for your help.
Regards,
Venkat

Hi Venkata, the tax code you see here comes from the FI setting in OB40..
however, it depends on transaction in OB40. This is what I know..it's more of an FI concept.
Can you just check if the Z123 is marked as statistical ?
Regards,
Raghu.

How to update cost related condition type amount in sales order without disturbing other condition types.

Hi ,
How to updae only one item condition ZYV0 value in sales order. If I can see we have several options from pricing type to update condition types but here My requirement is to update only one condition amount .If I can see other pticing types they will update all condition types .
-Exclusive option is checked for all the tables maintained in access sequence,
Below options were not worked for me.
-In condition type ----> Condition category has been updated with "D"(Tax) pricing type-"G" to update in sales order
- This option worked for me but condition category "F"(frieght) and pricing type -H but in conditions tab when I update two condition amounts are activated for one condition type like below.
ZYV0--30 % (old condition record value updated in sales order)
ZYV0- 50% (updated condition record)
Regards

Hi Rita,
Tried with condition category "u" and updated with pricing type "U" . It works as same I used old logic.
with condition categories "D" and "F" it will update old and new condition record values in sales order.
ZYV0--30 % (old condition record value updated in sales order)
ZYV0- 50% (updated condition record)
I have updated here existing condition record value from 30 % to 50 % validity periods are not changed.
Regards

Where to configure Tax categories for tax related Condition types

Similar Messages

Maybe you are looking for