Where to configure the auto output generation upon goods receipt

Dear all,
I need to configure the auto generate of the output message upon the goods receipt. How do I do that?
Thanks for advice.
Regards,
Edwin

Hi friend
Apart from Maintaining condition record as suggested in previous thread one more important activity is
In Migo screen on Header data section inside generaltab
just below Posting date feild you will find Printer Icon right hand side to that there is one check box, this must be checked either manually at the time of GR/GI creation or is preselected if the parameter NDR has been set to X (capital letter!) in your user master recordset. This is preselected if the parameter NDR has been set to X (capital letter!) in your user master record
Reward if usefull
Regards
SE

Similar Messages

Where to configure the reason code for payment differene

Dear Experts,
I did the settings in obxl with reason code option and changed the screen layout for the postings keys for payment difference as mandatory. while doing the account assignment in obxl system asking the reason code for payment difference. Where to configure the reason code any t.code is there, please guide me.
J.francis

Just Go SPRO>IMG>Financial Accounting (New) >Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payments > Manual Outgoing Payments > Overpayment/Underpayment > Define Reason Codes (Manual Outgoing Payments)
There you have to create Reason Code
Now go SPRO>IMG>Financial Accounting (New) >Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payments > Manual Outgoing Payments > Overpayment/Underpayment >Define Accounts for Payment Differences (Manual Outgoing Payment)
Here assign GL
Best Of Luck
Tanmoy

Problem of configuration the requirement output control ?

Hi ,
i am now in a very urgent situation that is the system does not create the message type after executing the transaction VL31N.
In detail :
I have used the transaction NACE to configure the "Requirements output control" and i have created 3 message type (Z1 , Z2, Z3) ( type V6 : handling unit) and i have coded for each of them to check the requirements for creating the messsage type ( the message type will be created if the sy=subrc = 0 after the forms are executed.
FORM KOBEV_Z1.
Check condition from the structure komkbv6
if cond Ok
sy-subrc = 0.
endif.
ENDFORM KOBEV_Z1.
FORM KOBEV_Z2.
Check condition from the structure komkbv6
if cond Ok
sy-subrc = 0.
endif.
ENDFORM KOBEV_Z2.
FORM KOBEV_Z3.
Check condition from the structure komkbv6
if cond Ok
sy-subrc = 0.
endif.
ENDFORM KOBEV_Z3.
But in fact , even if i have put the sy-subrc = 0 for each of them or for all , the message type was not created as i need .
Result :
if the message type is created automatically after executing the KOBEV or KOBEV , a printing program will be called to print the SAPscript form , but till now , i can not do that , to print the form i have to created the message type by hand ..
Is the something wrong in the system ? How can i configure them to run well ?
Please help me .
PS : I will reward immediately and i am waiting
Thank you very much

Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob

Where do configure the group currency

Hi,
Where do configure the group currency , what is the T/code , and path .
Regards,
Prabhakar

Hi Mike,
As per my knowledge Group currency have to configure in "OB22" T/code, after done configuration whether have to assign group currency to SCC4 T/code what u have been given .
Pl give me some additional guidelines.
Regards,
Prabhakar

Automatic Purchase Order upon Goods Receipt 101/161

Hi Guys,
Hope everyone is well. I would like to know in as simple terms as possible, what is the use of Automatic Purchase Order upon Goods Receipt mvt 101 or 161. Can someone explain to me the purpose of this? or applicable in which type of business scenario?
Because i think, if it is upon Goods Issue, then it is understandable, you would want to top up the stocks, but upon GR? Why?
This is a non configuration question, just a business process question..

>
Nazrin84 wrote:
> Hi Guys,
>
> Hope everyone is well. I would like to know in as simple terms as possible, what is the use of Automatic Purchase Order upon Goods Receipt mvt 101 or 161. Can someone explain to me the purpose of this? or applicable in which type of business scenario?
>
> Because i think, if it is upon Goods Issue, then it is understandable, you would want to top up the stocks, but upon GR? Why?
> This is a non configuration question, just a business process question..
This process is used in case of emergency when stock is required in the plant and we dont have time to first create PO and then get its approval and follow the normal process. In the case of emergency, we tell the vendor to deliver the material and on receipt of this material we take it into the system through GR and the corresponding PO is automatically generated.
Usually this is option available in system, but it depends on the clients requirement whether they want this option available to end users or not. Mostly our clients prefer not to have this option enabled, as this way can lead to irregularities by the users.
So they prefer to follow the normal process, but this process for above scenario is followed on war footings that way the GR takes place immediately when Goods are received.

Factory Output Account for Goods Receipt on Finished Goods Inventory

Hello Experts,
Factory Output Account for Goods Receipt on Finished Goods Inventory:
Could someone suggest if anyone has ever been able to separate the variances that normally post to a factory output account into one separate G/L account. My experience has always been that good receipts to finished goods inventory and the corresponding variances have always posted to the same factory output account. My client wants to separate this posting into two separate accounts. Any assistance will be highly appreciated.

Hi,
You can use separate G/L account for Factory Output Account for Goods Receipt on Finished Goods Inventory and Variances.
goto OBYC T.code do the following settings.
GBB-->AUA-assign gl account
PRD-->PRD-assign gl account.
one question from my side.
If you are using same account for both entries, where do you assing GL accounts in OBYC?
Thanks,
Rau

Automatic backorder scheduling upon goods receipt

Hello,
We need backorder scheduling to run automatically upon goods receipt.
When material is received we need backorder scheduling (program SDV03V02) to run automatically so that the allocation of materials to sales orders is updated as soon as possible. We also need a list of
sales orders that have been updated in this manner.
Steps for Reconstruction
Transaction code V_V2
This transaction should be executed automatically when certain movement postings such as goods receipt are done in SAP.
Does anyone know how this may be possible in standard SAP, or know a work around/solution for this question? Please advise, and thank you.

This might be possible with a workflow, but I'm not an expert on that.
A workaround would be to schedule a background job to run V_V2 as frequently as necessary. This won't be as fast as "immediately", but normally 5-10 minute difference is not noticable to the users. To my knowledge, rescheduling program displays the messages in the job log, so you'll have the order numbers there.
And, of course, there is always ABAP...

Output type for goods receipt

Hi guys,
Can any one lemme know what is the output type we can use for goods receipt- for generating a goods receipt smartform output?
and can u also lemme know the standard print program also.
if u have written any zprint program plz send it ASAP.
thanks n regards,
Bhargava.

u can see the output types for Goods Receipt in Transaction NACE. Application M1
Output type        Name
CHKL     Count List ( Program RTCHECKL, form RT_CHECK_LIST)
GRPL     Pallet Sticker ( Pro RTCHECKL, form RT_PALLET_LABEL)
The Form names mentioned are SAPSCRIPTS not smartforms.
Also Bhargava, chk out with ur Consultant wat output type suits ur requirement coz there r multiple options as u can see for urself in NACE under Applications M1/ME.
Hope it helps.
Regards,
Bikash
Message was edited by: Bikash Agarwal
Message was edited by: Bikash Agarwal

Cancel the quality inspection movement on good receipt

I am trying to cancel a quality inspection movement from qual. Inspect. to
unrestricted use. Here are the details:
1. A goods receipt was entered for Material XXX batch YYY for
1900kg. It was entered Aug 1, but was backdated to post on July
29.
2. I think an accident was made and the person
entered the good receipt into quality inspection status, rather than in unrestricted
use.
3. this person used the movement 321 without success .
4. Now it will not allow me to post goods issue with a back date of Friday
July 29.
When i try to reseverse the good recipt i received an error message Deficit of BA Stck.in qual.insp 1.900 KG
Message no. M7021.
Can you help me?
Thanks in advance

While doing reversing change stock type .

HTTP adapter: where to see the transformed output message

All,
I am a beginner in Webservices/HTTP interfaces in PI. I have to make changes on an existing custom interface which uses HTTP adapter. I have done the changes in the message mapping and tested it using the test tool. It seems OK.
However when we do end-to-end testing, data is flowing but bussiness needs a copy of the transformed data that has been sent out from PI.
I checked RWB->Message Monitoring-> Integration server(Database) and it showed the successful message. When I drilled further into this message, it showed the SOAP message (Version 0 and Version 1 with payload). The payload showed the data that ECC had sent to PI and not the transformed data that went out from PI to 3rd party via HTTP adapter.
Appreciate if you could guide me in right direction regarding where to see the Output/Transformed data that is actually sent to third parties.
I have checked SXI_MONITOR as well in PI but that also shows the payload only and not the transformed data.
Regards
SK
Edited by: Shirin K on Feb 18, 2010 3:10 PM

Hi ,
Go to particular message in SXI_MONITOR. In Message there will be window on left hand side. There will be Technical Routing.
Technical Routing> Payloads->Maindocument. This shows the Output data.
If you are not able to see Technical Routing inform you basis team they need to do some configuration in SXMB_ADM
Edited by: Rajhans Abhay on Feb 18, 2010 4:29 PM

Xfce keyboard shortcuts -- where to configure the def folder? [solved]

Hello,
I've moved my user's home directory, the old one still exists.
Now, when I run terminal via a shortcut, it opens at the old location. For thunar, it is the same.
I haven't been able to find where to configure that.
Any thoughts?
Thank you
Last edited by kwevej (2011-08-13 15:56:06)

I've created the new user via useradd or so, then I've copied the content of the another user's directory to the new one. (including the hidden files)
I've removed the old directory and it's fine now. Dunno why is that so, but it works. Thanks for the hint

Where to configure the SCAN address?

Hi,
I'm in the middle of installing the Grid infrastructure cluster for Oracle 11gR2 RAC on AIX 6.1
I had defined the public IPs, private IPs and interconnects in the DNS and hosts files. I am not using GNS because we use static IP Address, no DHCP.
during the installation, I will be asked for SCAN IP address, which I prepared and resolved by DNS, but I don't know where to configure it
The SCAN IP address is not pingable but can be lookedup and I get the reply to it
Where I put it, in the Rack Switch or shall I choose different installation method.
Kindly advice
Regards,
C.

Oracle is clear about the use of /etc/hosts to configure the SCAN:
See Note: *11gR2 Grid Infrastructure Single Client Access Name (SCAN) Explained [ID 887522.1]*
Instead of DNS or GNS, Can we use '/etc/hosts' to resolve SCAN?
Oracle strongly recommends that you do not configure SCAN VIP addresses in the hosts file. If you use the hosts file to resolve SCANs, then you will only be able to resolve to one IP address and you will have only one SCAN address - be sure to provide a hosts file entry for each SCAN address in hosts file in same order.
If hosts file is used to resolve SCAN hostname, you will receive Cluster Verification Utility failure at end of installation (See NOTE: 887471.1 for more details)
However, since you have already installed with the configuration in the /etc/hosts, you can fix this by configuring the IP addresses in the DNS (since you don't use GNS) and follow the following note to modify the SCAN settings:
*How to Modify SCAN Setting after Installation [ID 972500.1]*
Herve Etche

Where to Configure the Price for the UoM Conversion

Hi All,
I have a requirment from my client here that he wants to change the UoM of the material at the billin document level. The UoM can be changed but I realized once it is changed the price has gone all wrong. Where can I configure the price for the UoM conversion because I cannot find it anywhere in SD itself.
Appreciate all of your inputs.
Thanks a lot!

Hi Prashant,
I am trying to maintain the same material with different UoM but when I do so it says that the current condition is being processed at the current session. I guessed it meant that the conditiont record for that material type already exists?
How do I rectify this problem because when I enter the new line of material with the new UoM disappears.
Appreciate your input in this,
Thanks a lot!
Edited by: Yvonne Lee Sook Fun on Jun 16, 2009 4:32 AM

Output MLGR Report Goods Receipt to Buyer

I have configured the Output MLGR but when i edit the text to add information to the mail the buyer receive it dosnt work.
I have added symbols but it dosnt work
Any ideas? Thx

Hi Luis,
What symbols were added and where exactly ?
Regards
Ramesh Ch

Cross Docking with LE-WM - or - Reactivating Back Orders upon Goods Receipt

I have been reviewing the documentation for Opportunistic and Planned Cross Docking in LE-WM. The requirement is to release Back Orders upon receipt of a shipment to avoid putting them away and picking them right away from the bin. We want to release the Back Orders for picking in the GR area at the time of receipt.
So far it appears that Opportunistic Cross Docking depends on a Transfer Order already existing. The system then cancels the existing TO and replaces it with a TO to pick from the receipt Storage Type.
Planned Cross Docking appears to require an existing Outbound Delivery to the expected Inbound Delivery.
In the case of a Back Order, no Outbound Delivery or Transfer Order exist since there is no stock to release until the goods are received.
Is there a way to release Back Orders to be picked directly from Goods Receipt?
Thanks;
Jim

The problem is that all the information I found so far about it is over the process of external goods coming and sending they out without the need of storing in the warehouse. They go directly to the picking area (one step) or in two step process going first from 902 (Good receive from external) to Cross docking Sorage type.and another movement from Cross Docking Storage type to 916 Good issue Storage type.
I need to know if it is possible to implement a solution of Cross Docking for certain number of products having a factory and a warehouse. If so, would you give me a brief process flow?.
Thank You very much.
Al
Edited by: agmogena on Aug 22, 2011 12:01 PM

Where to configure the auto output generation upon goods receipt

Similar Messages

Maybe you are looking for