Where to configure the mail server of GRC access control 5.3?

We changes our SMTP server in SAP and we need to configure also the mail server in Virsa but i dont know how. Can someone help me how to change the SMTP server in VIRSA/SAP GRC.
Thank you and have a good day ahead.

Hi topnnehj,
In GRC 5.3 the log reports for firefighter access are sent from the back-end system. So, if you´re using the firefighter module, after a mail server change you have to set the parameters in tx. SCOT acordingly. Also you have to change in CUP if you´re using CUP workflow notifications via e-mail.
Regards,
Diego.

Similar Messages

Error GRC Access Control 10.0

We have a problem when execute the next steps in GRC Access Control 10.0
SPRO-->Governance, Risk and Compliance>Access Control--> Access Risk Analysis--> Batch RisK Analysis
We applied the next note, but problem is the same.
1563583 - SYSTEM_NO_TASK_STORAGE dump on AIX
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_GRRM_DASHBOARD_MENU_AUTH===CP
Application Component GRC-RM
Date and Time
13.03.2013 11:50:04
|Short text
|
|
The ASSERT condition was violated.
|
|What happened?
|
|
In the running application program, the ASSERT statement recognized a
|
|
situation that should not have occurred.
|
|
The runtime error was triggered for one of these reasons:
|
|
- For the checkpoint group specified with the ASSERT statement, the
|
|
activation mode is set to "abort".
|
|
- Via a system variant, the activation mode is globally set to "abort"
|
|
for checkpoint groups in this system.
|
|
- The activation mode is set to "abort" on program level.
|
|
- The ASSERT statement is not assigned to any checkpoint group.
|
|What can you do?
|
|
Note down which actions and inputs caused the error.
|
|
|
|
|
|
To process the problem further, contact you SAP system
|
|
administrator.
|
|
|
|
Using Transaction ST22 for ABAP Dump Analysis, you can look
|
|
at and manage termination messages, and you can also
|
|
keep them for a long time.
|
|Error analysis
|
|
The following checkpoint group was used: "No checkpoint group specified"
|
|
|
|
If in the ASSERT statement the addition FIELDS was used, you can find
|
|
the content of the first 8 specified fields in the following overview:
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|How to correct the error
|
|
Probably the only way to eliminate the error is to correct the program.
|
|
|
|
|
|
If the error occures in a non-modified SAP program, you may be able to
|
|
find an interim solution in an SAP Note.
|
|
If you have access to SAP Notes, carry out a search with the following
|
|
keywords:
|
|
|
|
"ASSERTION_FAILED" " "
|
|
"CL_GRRM_DASHBOARD_MENU_AUTH===CP" or "CL_GRRM_DASHBOARD_MENU_AUTH===CM001"
|
|
"IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED"
|
|
|
|
If you cannot solve the problem yourself and want to send an error
|
|
notification to SAP, include the following information:
|
|
|
|
1. The description of the current problem (short dump)
|
|
|
|
To save the description, choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
2. Corresponding system log
|
|
|
|
Display the system log by calling transaction SM21.
|
|
Restrict the time interval to 10 minutes before and five minutes
|
|
after the short dump. Then choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
3. If the problem occurs in a problem of your own or a modified SAP
|
|
program: The source code of the program
|
|
In the editor, choose "Utilities->More
|
|
Utilities->Upload/Download->Download".
|
|
|
|
4. Details about the conditions under which the error occurred or which
|
|
actions and input led to the error.
|
|
|
|
|
|System environment
|
|
SAP Release..... 702
|
|
SAP Basis Level. 0012
|
|
|
|
Application server... "KIO13701"
|
|
Network address...... "172.20.1.137"
|
|
Operating system..... "AIX"
|
|
Release.............. "7.1"
|
|
Hardware type........ "00F6C78E4C00"
|
|
Character length.... 16 Bits
|
|
Pointer length....... 64 Bits
|
|
Work process number.. 10
|
|
Shortdump setting.... "full"
|
|
|
|
Database server... "KIO13701"
|
|
Database type..... "DB6"
|
|
Database name..... "DGR"
|
|
Database user ID.. "SAPDGR"
|
|
|
|
Terminal.......... "192.168.0.5"
|
|
|
|
Char.set.... "C"
|
|
|
|
SAP kernel....... 720
|
|
created (date)... "Jul 8 2012 19:43:01"
|
|
create on........ "AIX 2 5 00092901D600"
|
|
Database version. "DB6_81 "
|
|
|
|
Patch level. 300
|
|
Patch text.. " "
|
|
|
|
Database............. "DB6 08.02.*, DB6 09.*, DB6 10.*"
|
|
SAP database version. 720
|
|
Operating system..... "AIX 2 5, AIX 3 5, AIX 1 6, AIX 1 7"
|
|
|
|
Memory consumption
|
|
Roll.... 0
|
|
EM...... 8379584
|
|
Heap.... 0
|
|
Page.... 16384
|
|
MM Used. 6205712
|
|
MM Free. 2170976
|
|User and Transaction
|
|
Client.............. 100
|
|
User................ "LVELASCO"
|
|
Language key........ "E"
|
|
Transaction......... " "
|
|
Transaction ID...... "51400164B1F00C40E1008000AC140189"
|
|
|
|
EPP Whole Context ID.... "5140015EB1F00C40E1008000AC140189"
|
|
EPP Connection ID....... "5140F9B0B19C1150E1008000AC140189"
|
|
EPP Caller Counter...... 1
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
Debugger Active..... "none"
|
|Server-Side Connection Information
|
|
Information on Caller of "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource ID. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
|
|
Information on Caller ofr "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource Id. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|Information on where terminated
|
|
Termination occurred in the ABAP program "CL_GRRM_DASHBOARD_MENU_AUTH===CP" -
|
|
in "IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED".
|
|
The main program was "SAPMHTTP ".
|
|
|
|
In the source code you have the termination point in line 59
|
|
of the (Include) program "CL_GRRM_DASHBOARD_MENU_AUTH===CM001".
|
|Source Code Extract (Source code has changed)
|
|Line |SourceCde
|
|   29|
lv_dashboard = lv_value.
|
|   30|
|
|   31|
TRANSLATE lv_dashboard TO UPPER CASE.
|
|   32|
|
|   33|
CASE lv_dashboard.
|
|   34|
WHEN 'HEATMAP'.
|
|   35|
lv_report = 'GRRM_HEATMAP'.
|
|   36|
|
|   37|
WHEN 'LOSS_OVERVIEW' OR 'LOSS_STRUCTURE' OR 'OB_LOSS_OVERVIEW' OR 'OB_LOSS_STRUCTU|
|   38|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
|   39|
|
|   40|
WHEN 'OVERVIEW'.
|
|   41|
lv_report = 'GRRM_OVERVIEW'.
|
|   42|
|
|   43|
WHEN OTHERS.
|
|   44|
ASSERT 1 = 2.
|
|   45|
|
|   46|
ENDCASE.
|
|   47|
|
|   48|
EXIT.
|
|   49|
|
|   50|
ENDLOOP.
|
|   51|
|
|   52|
WHEN 'GRRM_LOSS_MATRIX' OR 'GRRM_LOSS_MATRIX_NEW'.
|
|   53|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
|   54|
|
|   55|
WHEN 'GRRM_HEATMAP_REPORT'.
|
|   56|
lv_report = 'GRRM_HEATMAP'.
|
|   57|
|
|   58|
WHEN OTHERS.
|
|>>>>>|
ASSERT 1 = 2.
|
|   60|
|
|   61| ENDCASE.
|
|   62|
|
|   63| TRY.
|
|   64|
lv_regulation_id = cl_grfn_api_regulation=>if_grfn_api_regulation~get_regulation_id( i|
|   65|
|
|   66|
ev_authorized = cl_grfn_util_rep_auth=>has_rep_auth(
|
|   67|
io_session
= io_session
|
|   68|
iv_regulation_id = lv_regulation_id
|
|   69|
iv_report
= lv_report
|
|   70|
iv_activity
= grfn0_c_activity-print
|
|   71|
|
|   72|
|
|   73|
CATCH cx_grfn_exception.
|
|   74|
ev_authorized = abap_false.
|
|   75|
|
|   76| ENDTRY.
|
|   77|
|
|   78|ENDMETHOD.
|
|Contents of system fields
|
|Name
|Val.
|
|SY-SUBRC|4
|
|SY-INDEX|2
|
|SY-TABIX|1
|
|SY-DBCNT|1
|
|SY-FDPOS|0
|
|SY-LSIND|0
|
|SY-PAGNO|0
|
|SY-LINNO|1
|
|SY-COLNO|1
|
|SY-PFKEY|
|
|SY-UCOMM|
|
|SY-TITLE|HTTP Control
|
|SY-MSGTY|
|
|SY-MSGID|
|
|SY-MSGNO|000
|
|SY-MSGV1|
|
|SY-MSGV2|
|
|SY-MSGV3|
|
|SY-MSGV4|
|
|SY-MODNO|0
|
|SY-DATUM|20130313
|
|SY-UZEIT|115004
|
|SY-XPROG|SAPCNVE
|
|SY-XFORM|CONVERSION_EXIT
|
|Active Calls/Events
|
|No.   Ty.
Program
Include
Line   |
|
Name
|
|   34 METHOD
CL_GRRM_DASHBOARD_MENU_AUTH===CP
CL_GRRM_DASHBOARD_MENU_AUTH===CM001
59 |
|
CL_GRRM_DASHBOARD_MENU_AUTH=>IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED
|
|   33 METHOD
CL_GRFN_API_MENU_ITEM_ELA=====CP
CL_GRFN_API_MENU_ITEM_ELA=====CM001   126 |
|
CL_GRFN_API_MENU_ITEM_ELA=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
|   32 METHOD
CL_GRFN_API_MENU==============CP
CL_GRFN_API_MENU==============CM003
34 |
|
CL_GRFN_API_MENU=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
|   31 METHOD
CL_GRFN_LAUNCHPAD_UIBB========CP
CL_GRFN_LAUNCHPAD_UIBB========CM006
60 |
|
CL_GRFN_LAUNCHPAD_UIBB=>IF_FPM_GUIBB_LAUNCHPAD~MODIFY
|
|   30 METHOD
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CP
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CM001
76 |
|
CL_FPM_LAUNCHPAD_UIBB_ASSIST=>INIT_FEEDER
|
|   29 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
410 |
|
CL_COMPONENTCONTROLLER_CTR=>WDDOINIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
|   28 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
181 |
|
CLF_COMPONENTCONTROLLER_CTR=>IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
|   27 METHOD
CL_WDR_DELEGATING_COMPONENT===CP
CL_WDR_DELEGATING_COMPONENT===CM004
9 |
|
CL_WDR_DELEGATING_COMPONENT=>DO_INIT
|
|   26 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM00V
3 |
|
CL_WDR_CONTROLLER=>INIT_CONTROLLER
|
|   25 METHOD
CL_WDR_COMPONENT==============CP
CL_WDR_COMPONENT==============CM019
24 |
|
CL_WDR_COMPONENT=>INIT_CONTROLLER
|
|   24 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM002
7 |
|
CL_WDR_CONTROLLER=>INIT
|
|   23 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00E
24 |
|
CL_WDR_CLIENT_COMPONENT=>INIT
|
|   22 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00A
42 |
|
CL_WDR_CLIENT_COMPONENT=>IF_WDR_COMPONENT_FACTORY~CREATE_COMPONENT
|
|   21 METHOD
CL_WDR_COMPONENT_USAGE========CP
CL_WDR_COMPONENT_USAGE========CM009
67 |
|
CL_WDR_COMPONENT_USAGE=>IF_WD_COMPONENT_USAGE~CREATE_COMPONENT
|
|   20 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM003
81 |
|
CL_FPM_COMPONENT_MANAGER=>ADD_COMPONENT
|
|   19 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM004
19 |
|
CL_FPM_COMPONENT_MANAGER=>ATTACH_COMPONENT_TO_USAGE
|
|   18 METHOD
CL_FPM========================CP
CL_FPM========================CM005
89 |
|
CL_FPM=>PROCESS_EVENT
|
|   17 METHOD
CL_FPM========================CP
CL_FPM========================CM00C
34 |
|
CL_FPM=>RUN_EVENT_LOOP
|
|   16 METHOD
CL_FPM========================CP
CL_FPM========================CM002
5 |
|
CL_FPM=>IF_FPM~RAISE_EVENT
|
|   15 METHOD
CL_FPM========================CP
CL_FPM========================CM003
11 |
|

Hi Alberto,
The below Notes should resolve!
1428775
1744179
Hope this helps,
Luciana

GRC Access Control 5.3 installation

Hello all,
I'm planning the installation of SAP GRC Access Control 5.3 and have a few questions. In the software download section of SAP Service Marketplace, the most recent installation files are for Virsa 5.2. Under SAP GRC Access Control, there are no installation files that I can see. (I tried several different OSS IDs including partner ID, so I do not think it is a licensing issue) Could someone please confirm that the Virsa 5.2 files represent GRC Access control 5.3?
One reason for this question is that in Solution Manager, under Business Blueprint (SOLAR01), SAP GRC Access Control 5.3 is displayed as the default selection for Internal Controls. Is SAP planning to release installation files in the near future for SAP GRC Access Control 5.3? If so, when?
Thanks in advance,
Glen Hoaglund
Capgemini Basis Consultant
Edited by: Glen Hoaglund on Jun 3, 2008 3:13 PM

John & Glen-
Right now Compliance Calibrator 5.3, now Risk Analysis and Remediation, which is part of Access Control 5.3 is currently in Ramp Up, and will be available in October 2008.
You can download the User manuals for 5.3 from SAP Marketplace. That will give you an idea of what functionalities 5.3 has and how it is structured.
From my observation of 5.3, and having implemented 5.2 for some clients, 5.3 does have some functionalities which are missing in 5.2. But for setup and sizing, it is always recommended that you allocate GRC on its own server with a lot of space. The applications are very memory-intensive.
I believe FireFighter, or Superuser Privileged Access in 5.3, will still reside in the ABAP stack, with the reporting done on both ABAP and Java stacks. The bulk of the functionality of 5.3 is the same as 5.2.
Let me know if you have any questions...
Ankur
GRC Consultant

"Unable to establish a connection between WebEx and the mail server."

Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!

Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture.

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Configuring the file server in KM and access,edit the documents from it

Hi friends,
My requirement is to configure the file server where u will have all the structured and unstructured data stored here. So users can share the documents and create, edit ,save the documents from the file server itself.
In KM what kind of file servers are there apart from the one it supports by default.
Can anybody pls provide the configuration steps regarding how to configure the file server i KM.
To configure the file server is webDAV protocol required?
Points would be assigned for the helpful answer.
Thanks in advance.
Regards
Sireesha.

Dear Sireesha,
Well KM supports mostly all the File server however we have some restrictions with Novell FS and Sharepoint Server from Microsoft. Like versions and other meta data have some issues.
Alsothough to configure a File Server you need to first create a FS repository Manager. Details can be found in the help guide:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm">FS Repository Manager</a>
Yes WebDAV protocol is required here.
You can create WebDav RM as well.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm">WEBDAV</a>
The above links will help answer your queries.
Regards
Anjali

An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in message

I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
The message that has started coming up is the following:
An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.

I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

Your users can utilize Outlook no matter where your email is hosted at.
how will it be different for them
different from what?

Adobe LiveCycle ES 8.2 Installation Error can't configure the App Server from Config Manager

Hello All-
We are trying to install the Adobe LiveCycle ES 8.2 SP2 and we are getting some issues while configuring the Application Server from the Config Manager, not sure why are those showing up, we never had these issues before when we installed 8.0, please look at the lcm log and the screenshot I provided for the errors which we are getting.
We are trying to configure the remote Application Server WebSphere on Linux from my machine which is on Windows and i made the target Application Server as WebSphere and target platform as linux when i initially installed the livecycle media.
The LCM logs say it failed to run the jacl scripts in the LiveCycle root directory and we wonder why is it pointing for the target Application Server to the Application Server which resides on my machine rather than it should point to the one on server. I am not sure what's going on and we did exactly what we did for 8.0.
Below are the environment details where we are trying to install.
Adobe LiveCycle ES: 8.2 SP2
Database: IBM DB2 9.1 FP4.
JVM Version and Vendor: 1.5.0 IBM Corporation
Application server: IBM WebSphere Application Server/6.1.0.19
Operating System: Linux
Hardware: x86 .
Any help will be appreciated!
Thanks-
Karthik.

Hi All,
Even i was facing the same issue but i was able to resolve it.
Although the earlier reply from karthik_chowdary was sent way back in 2008 and i think would have got resolved till now, but still the resolution which i have found is
The port i was using on the app server conf screen was that of application server HTTP Port.
But here in case of WebSphere ND, we need to use port specified in WAS UI > System administrator > Deployment manager > Ports
Try using that by default it is 8879.
And this resolved the issue.
~Hkin

How to Configure a mail server with OIM

Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

Mail Adaptor : How to extract particular Mail from the mail server?

Hi @,
I have a requirement where I need to extract all the new mails with a aprticular Subject line to the XI and then forward it to the receiveing system.My problem is that the actual payload is situated in the Mail attachment which I will use in my scenarion but the filtering has to happen based upon the mail subject.
I am not able to deal as the filtering and usage of payload are diffrent,need help in this regard
Regards

Hi
As far as i know Mail adapter wouldnt be able to do anything of this sort.It will read all mails which it has never read before.You should use the mail Server for this.
Thanks

How to configure the smtp server..

i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...

This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
    private String d_email,d_password;
     * This example is for gmail, you can use any smtp server
     * @param d_email --> your gmail account e.g. [email protected]
     * @param d_password --> your gmail password
     * @param d_host --> smtp.gmail.com
     * @param d_port --> 465
     * @param m_to --> [email protected]
     * @param m_subject --> Subject of the message
     * @param m_text --> The main message body
    public String send(String d_email,String d_password,String d_host,String d_port,
            String m_from,String m_to,String m_subject,String m_text ) {
        this.d_email=d_email;
        this.d_password=d_password;
        Properties props = new Properties();
        props.put("mail.smtp.user", d_email);
        props.put("mail.smtp.host", d_host);
        props.put("mail.smtp.port", d_port);
        props.put("mail.smtp.starttls.enable","true");
        props.put("mail.smtp.auth", "true");
        //props.put("mail.smtp.debug", "true");
        props.put("mail.smtp.socketFactory.port", d_port);
        props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
        props.put("mail.smtp.socketFactory.fallback", "false");
        SecurityManager security = System.getSecurityManager();
        try {
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);
            //session.setDebug(true);
            MimeMessage msg = new MimeMessage(session);
            msg.setText(m_text);
            msg.setSubject(m_subject);
            msg.setFrom(new InternetAddress(m_from));
            msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
            Transport.send(msg);
            return "Successful";
        } catch (Exception mex) {
            mex.printStackTrace();
        return "Fail";
    //public static void main(String[] args) {
    //    MailSender blah = new MailSender();
    private class SMTPAuthenticator extends javax.mail.Authenticator {
        public PasswordAuthentication getPasswordAuthentication() {
            return new PasswordAuthentication(d_email, d_password);
}

A very simple question: how to obtain the mail server name?

In our JSP application, at one point an email will be sent to notify one event. Currently, that is done by using the html tag: mailto. To have more control on the email in tems of context format (a bad layout right now) and others. I would like to have it processed at servlet by using the JavaMail API, so that it have a nice format and have the sender's email address right in case email client is not installed in the machine where the browser in. The JavaMail API is straight forward. The question is how to obtain the mail server name, and the sender's email address if there is one?
Thanks.
v.

How to obtain the mail server's name? It's your server, you should know its name. Or if it isn't your server, you should ask the administrator for its name. Point is, you need to decide in advance what server you are going to use and hard-code its name into the program or into a properties file.
And how to obtain the client's e-mail address? You have to ask the client, probably by putting a box in the HTML and asking them to type it.

Hello! I cannot get my gmail from my iPad icon any more, saying the mail server is not responding. I can still get my gmail though from google search! Can you help??

Hi! The Mail icon on my iPad is no longer responding! A message comes up saying - ' Cannot get mail...the mail server imap.gmail.com is not responding. Verify that you have entered the correct account info in Mail settings'. I have tried this and everything is correct! It is puzzling because I can still get my gmail through Google search! Can you help?? Thanks

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Error configuring the Kanaka Server via Wizard in Step 2 / 4

Testing the Kanaka Client for Mac we have an error configuring the Kanaka Server via Setup Wizard in Step 2 of 4:
After selecting the context where the Kanaka Proxy Object and the Administrator Group should be created and clicking on the next button the Wizard displays an error message >Unknown Directory services error has occurred< and stops. We are not able to complete the Wizard and do not find any message in the log(s) and eDirectory traces which let us know what is going wrong.
Any help would be appreciated.
Werner Seifert
Information Management
Johannes Kepler University Linz/Austria
werner dot seifert at jku dot at

On 24/01/2012 06:46, wseifert wrote:
> Testing the Kanaka Client for Mac we have an error configuring the
> Kanaka Server via Setup Wizard in Step 2 of 4:
>
> After selecting the context where the Kanaka Proxy Object and the
> Administrator Group should be created and clicking on the next button
> the Wizard displays an error message>Unknown Directory services error
> has occurred< and stops. We are not able to complete the Wizard and do
> not find any message in the log(s) and eDirectory traces which let us
> know what is going wrong.
>
> Any help would be appreciated.
Does the container you're adding the Kanaka Proxy object to have a
Universal Password policy assigned?
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Where to configure the mail server of GRC access control 5.3?

Similar Messages

Maybe you are looking for