Where to Configure the Price for the UoM Conversion

Hi All,
I have a requirment from my client here that he wants to change the UoM of the material at the billin document level. The UoM can be changed but I realized once it is changed the price has gone all wrong. Where can I configure the price for the UoM conversion because I cannot find it anywhere in SD itself.
Appreciate all of your inputs.
Thanks a lot!

Hi Prashant,
I am trying to maintain the same material with different UoM but when I do so it says that the current condition is being processed at the current session. I guessed it meant that the conditiont record for that material type already exists?
How do I rectify this problem because when I enter the new line of material with the new UoM disappears.
Appreciate your input in this,
Thanks a lot!
Edited by: Yvonne Lee Sook Fun on Jun 16, 2009 4:32 AM

Similar Messages

  • Enter the price for the service item

    Dear Experts,
    We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
    Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
    Thanks in advance.
    Thanks
    Umakanth

    Hello,
    I assume you are using a Product category configured for Extended Classic scenario.
    In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
    Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
    You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
    If you get the same error, please raise a OSS message for SAP.
    Thanks,
    Sushil

  • Does SAP have  function to allow the prices for the activities type to copy

    Hi Expert,
    Would like to seek for your help refer to above subject.
    Does SAP have  function to allow the prices for the activities type to copy from previuos fiscal year to current fiscal year so that we do not need to manually set up the acitvities types prices via KP26.
    What are the T-code and what are the configuration need to be set in order to use the function.
    Please help.
    Regards,
    KH

    Hi,
    Thank you for the prompt reply.
    However, would like to seek for your advise does SAP provide standard report to view the cost of activities incur?What are the T-code?
    Thank you.
    Regards,
    Karen

  • BAPI_PO_CHANGE to update the Price for the line item not updating the Price

    Hi,
    I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
    I am passing following data to the BAPI.
    Plant: CQ11
    PO                   Material                Price
    4500002142     TEST_BATCH     12
    Please provide suggestion.
    Regards,
    Jubin.

    Hi,
    check this link...this has sample code
    [http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
    Regards,
    Surinder

  • Material has more than one plant, only show the price for the first on

    Hi:
    I am having the standard price for the material with the different plants ,I am seeing only one Material and Standard price(if a material has more than one plant, only show the price for the first one In the report ):
    plant :de87 Material: 60020601 Standard price: 1237.00
    plant:PT01 Material :60020601 Standard price: 634.00
    In the report I am seeing DE87 with the standard price :1237.00 .
    I am extracting from the 0MATERIAL_ATTR
    Please help me how can I display all plants with the material and std price. In my data source there is no PLANT
    rgrds
    Kumar

    Hi:
    Report is running on 0MATERIAL(Transactional master data),Data sourc: 0MATERIAL_ATTR,
    We are having the standard price in the 0MATERIAL ,(Standard price is combination of plant and Material) .Plant is not available in the material,so in the report its displaying only first result
    plant :de87 Material: 60020601 Standard price: 1237.00 --->Displaying this
    plant:PT01 Material :60020601 Standard price: 634.00
    In the above we are having the same material but different plant and different standard price. so I need to display the both in the report.
    Rgrds
    kumar

  • Why not reduce the price for the pre-installed Aperture3?

    On the configuration page for the MBP, I find the cost for the Aperture 3 remain £173.00.
    I wish it preinstalled but it would be much cheaper to purchase through the App store.
    Is the premium paid to obtain a Aperture 3 CD? I am mystified.
    What is best for the stability of Aperture 3 ?-Pre installed [pay the premium] or down load from the the App store without an Aperture 3 cd?
    Regards

    So, I ordered a new MBP with Aperture pre-installed for $199.99 before checking out the Aperture page on Apple.com and seeing that it was available for $79.99.
    I called Apple immediately to change the configuration of my computer and have it removed.
    They seemed perplexed. Nice, but confused. How could this be true?
    Truly.
    But it is true, and once they realized it, they sympathized. They told me that they would reconfigure the computer. I asked if it would be possible for Apple, since they were charging $79.99 for the software, to simply reduce the price to that # for the preinstall?
    The operator left and came back, saying she was able to have the price of the computer reduced by $100.
    Which is great. I asked if changing the configuration of the computer would cause a delay in shipping - she suggested it would, but realizing that I didn't find it just to pay even $10 more for an application to be pre-installed, she asked if I'd like her to try to have the difference removed. I said, why yes, thank you.
    She came back to say that the price would be matched.
    So, I'm getting Aperture pre-installed for the App store price.
    I bet you can too.

  • HT4095 I have been gradually purchasing TV episodes on iTunes reducing the overall cost to complete it. On the eve of the cost reduced to $0.14-15 to complete the series the price for the total series went back up to full price.

    I was wondering if something flipped in iTunes code where it just would not allow a episode under the normal price which read back into the complete price of the season. I have quite a few episodes left but I want to wait until this issue was resolved to continue and not pay the full price for each subsequent episode when the rest of the season should cost under a quarter.

    I was wondering if something flipped in iTunes code where it just would not allow a episode under the normal price which read back into the complete price of the season. I have quite a few episodes left but I want to wait until this issue was resolved to continue and not pay the full price for each subsequent episode when the rest of the season should cost under a quarter.

  • HT201272 I cannot view a movie I rented on iTunes.  I have gone through all the troubleshooting and have reset my computer with no luck.  My account had been debited and when I go to the movie's site, the price for the rental had increased. Help please!

    I recently downloaded "Inequalirt For All," a movie by Robert Reich.  I loaded $20 onto my iTunes account and there was a special where I could rent the movie for $0.99.  I rented the movie but have not been able to download and play it.  The error message says that there was a problem with my download even though it charged my account.  I have gone through the troubleshooting steps and have reset my computer.  The rental does not show up on my iPad or iPhone either.  I would like to watch this movie!  Please help!  Thank you!

    Hello Yazan1,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Best of luck,
    Mario

  • Why is the price for the Single App subscription missing from the pricing page?

    I'm trying to find out the cost of a Single App subscription at http://www.adobe.com/ca/products/creativecloud/buying-guide.html but the price is not being displayed:

    Hi Ryan,
    It appears the pricing might be broken for your region. I've reported the issue. Thanks for reporting it!
    I think you might be able to get the pricing from here in the meantime:https://creative.adobe.com/plans
    -Dave

  • Is the price for the upgrade to Lr4 $79 for students and teachers?

    It seems like there should be a better upgrade price via the Education Store.

    This is regular upgrade price.
    You want it even lower

  • When are the prices for the new Macbook Pro with Retina Display going DOWN!?

    i want to buy it but it but its almost unafordable for me!!! please lower ir down for GODS SAKE!!!

    you can send your opinion right there:
    http://www.apple.com/feedback/macbookpro.html
    i think that too!!
    but i wouldnt buy it because its not upgradable or fixable..
    i dont need 16 Gb right now, but i may need them after three years and its expensive!!
    it is dedicated for professional designers with money, not regular people

  • What is the price for Unlocked iphone5 for the 16 GB , 32 GB, & 64 GB. ?

    I search the web regarding the price for the unlocked iphone5 price and I found that it's 649 $ for the 16 GB , 749 $ for 32 GB and 849 $ for the 64 GB. But some shops in DC they are asking a price of 1200 USD for the 16 GB.  Where should I buy the unlooked iphone 5 in Washington DC and in what price and which is the right price ?
    Thank you

    No availability of unlocked devices in the US has been announced at this time.

  • How does the return sales order captured the price for mat. Doc. during GI

    Dear Guru,
    We have a commercial return sales order process, which we have created a Doc Type YR01 "Commercial Return"
    everytime when this YR01 is been generated from the Customer Return PO, we need to change the MAP via tcode MR21.
    Problem here, this time the user processed with a wrong step, the user straight away to create a DO and GI for this YR01  before the MAP is changed. SO obviously the price in Material Document generated when GI is inccorect, thus a reversal for this GI and DO is done.
    After DO and GI is reversed, we update the correct MAP via MR21 and perform a DO and then GI, but we realized the Price in material document doesn't capture the latest updated MAP price.
    So after many testing, we found there are 2 ways to solve this,
    1. Recreate a new YR01 Commercial return sales order
    2. Or during the MR21, select the variance "Special Stock - Sales Order"
    Question,
    Can i know where does the SO capture the MAP price and where and which table that the MR21 will be updating when selected variant "special stock - sales order"?
    Thank you very much,
    Chee Wee

    Hi,
    The price entered in MR21 updates the price for the material in material master "accounting 1" tab page. This will update the price in the table MBEW according to the valutaion class you have assigned to the material type.
    If you are entering "Special Stock - Sales Order" in MR21. the valuation class for sales order stock should be assigned for the material in the material master "accounting 1" tab page MBEW-EKLAS, this valuation class will have an altogether different accounting, so according to me option 1 i.e reversal of document YR01 is a more easier solution.
    Regards
    Aadesh Kamat
    Edited by: aadesh123 on Jul 11, 2011 10:45 AM
    Edited by: aadesh123 on Jul 11, 2011 10:48 AM

  • Dear Sir, I am registered customer of Adobe Illustrator CS6. I want to update the adobe to Adobe CC the latest software. What is the price for updation.

    Dear Sir
    I already have adobe illustrator CS6. I want to update to Adobe CC. Can you please send the price for the updation.
    Thanks
    Rajan

    Full prices can be found here:
    https://creative.adobe.com/nl/plans?store_code=nl
    The price for a single applications is €24,- a month

  • What´s the price for any Cisco ASA security parts?

    Hello everybody,
    Please, I need to know the prices for the items:
    ASA5500X-SSD120=     
    FS-VMW-2-SW-K9       
    L-ASA5525-TAM=       
    I need to implement Cisco IPS with 2 Cisco ASA 5525X.
    Thank you.

    Your local Cisco partner can provide pricing for your area.
    The Cisco Support Community is not the place to request price quotes.
    Please go to www.cisco.com and refer to the top menu pick "How to Buy" to find an authorized partner / reseller serving your area.

Maybe you are looking for