Where to copy existing XCM file for new b2c project?

Hi,
I have created one "b2c_myproject" application by using build tool. I have one b2c application running. I want to copy it's XCM setting to my new project.
I do not want to do setting by seeing each value in XCM. Any one has a Idea from where I can copy existing XCM files?
Thanks.
Ashish Patel.

Hi Ravi,
As per your instruction I copied XCM folder into desired location. But when I am accessing that xcm page like
"http://localhost:50000/b2c_myproject/xcm/admin/init.do"
But I can not see default setting which I have made to my original b2c applicaiton.
there are no XCM configuration under customer section.
pl. let me know where I am making mistake.
What I want actully, I want to see my basic xcm setting in my b2c_myproject so do not have to do basic xcm setting.
Thanks for your reply and helping me.
Ashish Patel.

Similar Messages

I want to re-install Premiere Elelments 8, but cannot find downloads for version 8. Where can I download the files for version 8?

I want to re-install Premiere Elelments 8, but cannot find downloads for version 8. I have the serial no. Where can I download the files for version 8?

Hi Jeff. I did purchase Premiere Elements 8 from Adobe (download version), but couldn't find the files to download again on the adobe.com website. I did, however carry out another search of files from my old PC and eventually found the files to reinstall on my new PC, using my registered product serial no. Installation has worked. It seems that Adobe has stopped supporting version 8 as I could only find version 9 and later for download from the adobe.com website.
Thanks for your prompt reply

Making change in original application file for new version

Hi
I am new to DMS.
I have a basic query about versioning of DIR.
I have created a DIR with status in Released.
I have attached a original application to the DIR. Now when I am creating a new version of DIR, original application file is also getting copied to the new version which is desired.
My problem is I want to make changes into original application file in new version of DIR and want to save. But I am unable to do so. It is not allowing me to change the original application file for new version which is desired for storing some ISO documents.
Is there any settings which I am missing?
Waiting for reply ASAP.
Thanks and Regards,
Niraj Sikligar

Hi
If you want to make changes in the "Release" Status, go to dc10, select Doc type and define status screen. Do not put "S" (Lock mode) for Status - Release
Also please check in new version , you are clicking on Edit symbol in Orginals tab, if u double click the file, it would open always in display mode , and it wont allow you to make any changes
Regards
Aby

Where to find search history files for firefox

where to find search history files for firefox, I accidently deleted them. Have Time Capsule, but do not know where to look. Can't find anything but a folder called Mozilla. Thanks - Alan

Thanks. Guess i will have to download the driver package from Nvidia and extract the headers from that.

Where can i get transport file for bc400's template programs to import

hi
where can i get transport file for bc400's template programs to import to miniwas
would like to do the exercises for tw10 and tw12
regards
jan

Thanks Spencer.
I downloaded it, etc. and that didn't work.
It actually seems to work the same way as before I downloaded that driver, meaning, it prints but leaves it in the "# Document Pending" status.
Since the wireless HP print server isn't working (No connectMgr.exe file) there's no connection and therefore the doc won't print.
RE: Print/Server software out of date. The software was working for many months after originally installing it on this laptop. Then it just stopped. Now it can't find the .exe file and that's odd.
If I could find that file I could just save it where it needed to be and I'd be good to go.
Thanks for the help.
Going to uninstall and reinstall again, just for fun. I'll report back.
J

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

Jeannot7 wrote:
I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
FWIW,
Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

How and where to modify the BAI File for Electronic Bank Statement

HI,
Can anybody explaing me How and where to modify the BAI File for Electronic Bank Statement.
thanks
Sap Guru
kischowdary--gmail.com

Hi
Actually there were two formats BAI & BAI2, BAI2 format is latest one.
Please ask for the latest file from bank and try to process.
Thanks
Kalyan

Where can i find .properties file for jco connection?

For jco connection to SAP, we need .properties file. Is this file already contained in Exchange Profile or somewhere??
If yes, where can i find .properties file for jco connection or what is the path to this file?
OR, do we have to create manually??
Any help is appreciated.
Thanks.
Karma

Hi Karma,
Please take a look at these..
Where to set up the JCO connection?
http://help.sap.com/saphelp_nw04/helpdata/en/bc/42e13d82fcfb34e10000000a114084/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/bc/42e13d82fcfb34e10000000a114084/content.htm
cheers,
Prashanth

If I have a pic in more than one album, does iPhoto make more than one copy of that pic? When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.

If I have a pic in more than one album, does iPhoto make more than one copy of that pic? When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.

No it doesn't. Albums simply reference the photos in the Library. A single shot can be in 100 albus and use no extra disk space at all.
If you have the same shot in two Events then yes, the file is duplicated.
When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.
The Finder doesn't really understand the iPhoto Library. It's quite possible for the iPhoto Library to contain many files with the same name. The Library also contains different versions of the same shot - thumbnail, originals and edited version. This is normal.
Regards
TD

Where can i hire 50 iPhones for a video project.

HI all, I was wondering if any one here would have a option or idea on where i could hire 50 iphones for a video project idea. I'm a creative director for a sports company and we have a idea using the video opition on the iphones and making a edit which will back up our new print and internet advertising campaign. I not sure contact how i would or could contact the right people at Apple that could help me. So thought i put it here.

Adobe stop developement of Adobe Flash Player for all mobile devices almost two years, ago.
Mobile Flash player doesn't exist for either Apple iDevices on iOS or Android device and their apps.
So, Apple is NOT going to be able to help you.
Puffin, SkyFire and Photon all charge a little for their web browsers because they are THE ONLY ONES, that provide any type of limited support for Adobe Flash Player.
There are no other apps or web browsers that will allow viewing of Adobe Flash Player based content.
So, good luck to you.

[svn:fx-trunk] 8056: More updated project properties files for the sparkTest project.

Revision: 8056
Author:   [email protected]
Date:     2009-06-22 12:13:58 -0700 (Mon, 22 Jun 2009)
Log Message:
More updated project properties files for the sparkTest project.
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/sparkTest/.actionScriptProperties
    flex/sdk/trunk/development/eclipse/flex/sparkTest/.project

Thats good news.

How to create a .jar file for the BPEL project

hi all,
how can i create a .jar file for my BPEL project, i am trying to deploy the project but getting an error :
"Error: [Error ORABPEL-10902]: compilation failed [Description]: in "C:\OraBPELPM\integration\jdev\jdev\mywork\Workspace_BPELDemo\BPEL_Report\BPEL_Report.bpel", XML parsing failed because "". [Potential fix]: n/a. "
and when doubel cliking on this error Jdev take me to the beginning of the ".bpel" file.
I 'm really stuck in here i am not able to deploy the process!
Thanks,
Rana

Rana:
If you haven't already, I would post this question in the BPEL forum. I would expect a much better turnaround there.
Johnny Lee

[svn:osmf:] 14412: Added the Syndication. swc to the command line build config file for the AkamaiPluginSample project .

Revision: 14412
Revision: 14412
Author:   [email protected]
Date:     2010-02-24 17:48:22 -0800 (Wed, 24 Feb 2010)
Log Message:
Added the Syndication.swc to the command line build config file for the AkamaiPluginSample project.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml

I think it is not supported through ant script and you may have to contact Oracle Support. Please go through below thread (hisaak's reply) -
Re: Export OSB configuration jar file using Ant
Regards,
Anuj

How to copy existing row value into new row with a trigger. Same table

Oracle guru,
I am looking for a before or after trigger statement that will copy existing values inserted in the previous row into columns A & B. Then insert those values in a new row into column A & B if null? Same table. Hopefully my question is clear enough.
-Oracle 10g express
-I have an existing " before insert trigger" that insert id and timestamps when a new row is created.
-Table is composed of column like id,timestamps,A,B and more.
Thanks in advance
Pierre

957911 wrote:
Oracle guru,
I am looking for a before or after trigger statement that will copy existing values inserted in the previous row into columns A & B. Then insert those values in a new row into column A & B if null? Same table. Hopefully my question is clear enough.
-Oracle 10g express
-I have an existing " before insert trigger" that insert id and timestamps when a new row is created.
-Table is composed of column like id,timestamps,A,B and more.
Thanks in advance
PierreI will call it a very Wrong design.
It is a wrong Table Design. You are duplicating the data in table and not complying with the Database Normalization rules.
How about Verifying if Column A & B are NULL before inserting and inserting another row and avoiding it in Triggers?
If you are bent to achieve this, below code might be helpful. However, I would never go with this approach. If you would care about explaining the reason for going ahead with such a data model, people could suggest better alternative that might conform with Normalization rules.
create or replace trigger trg_test_table
after insert on test_table
for each row
declare
pragma autonomous_transaction;
begin
if :new.col_a is null and :new.col_b is null then
    insert into test_table
    select 2, systimestamp, col_a, col_b
      from test_table
     where pk_col = (select max(pk_col) from test_table b where b.pk_col < :new.pk_col);
end if;
commit;
end trg_test_table;Read SQL and PL/SQL FAQ and post the mentioned details.
Do not forget to mention output from
select * from v$version;

Copying one .eas file for multiple sprite sheets.

Hi, I've been googling the web trying to find answer to a problem but haven't found a solution yet. Maybe someone here has an idea.
I'm working on a project with Edge Animate CC where I'm creating a multitude of different animated symbols from sprite sheets. The symbols/sprites, which there are a lot of, come in sets, each with a different character wearing different colour clothes. For example, there's one of a man in a white shirt walking, and then the same man in a blue shirt, a red shirt, and so on, and then the same for several other characters. Because each version of each character is the same except for a colour change, I've been trying to create one sprite sheet from Flash CC, make colour edits to the sprite sheet in Photoshop CC, save it with a new name, then import it into Edge Animate using the same spritesheet.
It seems straightforward enough but what I've learned is you can't use an .eas file with spritesheets other than the one it was created with in Flash. When I try it says the .eas file and the image don't match, and to check the paths for both files. When I copy the .eas file and rename it, giving it the same name as the new sprite sheet I want it to work with, I still get the same message. When I open up that .eas file in TextEdit and change the "image" filename in the "meta" section to correspond to that of the new sprite sheet, it still doesn't work. I don't see anything else within the .eas file that would tie it to any particular spritesheet, so between making that change and changing it's filename I would expect the .eas file would work the new sprite sheet.
I know I could create sprite sheets for each colour scheme of each character through Flash, but since they are all identical other than their colour it would save me a ton of time to just copy and edit the sprite sheets. The colour changes are not something I could do within Edge Animate.
Has anyone had similar issues? Any tips?
-A

Hi Medley, Good to see that you are experimenting with the new SpriteSheet feature available in Animate CC 2014.
Some points:
The EAS file format is currently only supported from Flash Pro CC 2014. There are some meta data tags that is read when you bring in an eas type spritesheet and therefore Animate will be able to import only the sprite sheets created from Flash Pro CC using the EAS route.
If you want to use spritesheets from other applications like photoshop, I would recommend that you don't enable the "load an eas file" check-box. In this case the sprite sheet PNG will be the only input that you need to specify in the Import dialog.
In this case you will need to have a sprite-sheet which has the individual sprites that is stacked out in order from left to right and top to bottom. You can then specify the rows and columns and the padding options in the Spritesheet import dialog in animate.
Let me know if this works for you.
-Sujai

Where to copy existing XCM file for new b2c project?

Similar Messages

Maybe you are looking for