Where to download and install locally one note 2013x64 for w8.1?

I tried and get only x32 and I can't use on w8.1x64
despite it said installed but I tried using one note I get the purple OneNote screen with running circle and Almost Done for a couple hours and not getting anywhere.

I'd try them over here.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-onenote?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1425355697067
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Moved iphoto to trash and downloaded and installed new one but still tells me to prepare and upgrade it when I have done it 2 or 3 times now... how do i get it to open so I can upload my photos?

moved iphoto to trash and downloaded and installed new one but still tells me to prepare and upgrade it when I have done it 2 or 3 times now... how do i get it to open so I can upload my photos?

It helps if you provide details - not just a problem
What exactly dod you have and have you done?
What version of iPhoto did you have and what version do you now have? Of the OS? If you are upgrading from iphoto '08 or earlier did you download and RUN the iphoto library upgrader?
What is happening including exact messages
LN

HT4972 I have an iphone 4s and it's telling me that there is a software update available to iOS 6. When I got to "settings" on my phone, the "download and install" tab is not highlited and I can't click on it to get the update.

I have an iphone 4s. I have an alert that there is a software update available to iOS 6. When I got to the settings tab, the "download and install" button is not highlited and I can't click on it. Below that, it says that this update requires a Wi-Fi network connection to download. So I connected my phone to my computer and tried to update throug itunes. When I clicked the update tab on itunes on my laptop, an alert pops up that says I need to be connected to the internet for th update to take place. I am confused because I am connected to the internet, but for some reason the connection is not being recognized when I try to update.
I am using a Gateway laptop and my internet connection is a verizon 4g device that I plug into a USB port. I feel like this should be so simple but have not been able to figure it out even when I called Apple and spoke to a rep...help!

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.

I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks

From where to download and install applications for MAC-OSX.

hello everyone,
I am trying to develop experimental HLS server and for that i need following cmd-line tools for my MAC-OSX-10.6.8.
I have read some where that these tools are there from OSX version number 10.6 but I have only "mediastreamsegmenter"command on my MAC machine.
I am very new to MAC environment and I don't know how to download/install new libraries and applications for MAC.
Can someone please provide some help,
from where to download and install these cmd-line tools?
I need following tools:
1. mediastreamsegmenter
2. mediafilesegmenter
3. mediastreamvalidator.
4. variantplaylistcreator
Thanks

Maybe this http://stackoverflow.com/questions/2973411/implementing-apples-http-live-streami ng-problem-with-mediafilesegmenter-tool can help you.
Stefan

I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......

I had an iMac with Snow Leopard 10.6.8, I downloaded and installed Lion, did not make me any questions. After the reboot I get this fatal error: Panic(cpu 0 ......) Kernel trap ......

Please post the Kernel Panic report. You will find it at /Library/Logs/DiagnosticReports per
http://support.apple.com/kb/ht2546
When we look at the KP report we may find some clues why it is occuring.

TS1717 Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?

Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

Help! I downloaded and installed the a security update for safari last night and after it rebooted my system quit recognizing my password and quit working, taking me to a utilities window.

I let my system download and install the latest security update for Safari yesterday, 28 Apr 14, and when it rebooted, it wouldn't let me login. Instead it took me to a utilities windown that allowed me to verify my h/d then told me it couldn't be repaired so I would need to save all of my documents (not sure how since it won't boot up) and reinstall OS X. Help!

terrelld,
if you’ve been making regular backups to date, then you could just restore from the last update which you’d made before installing the most recent Safari update. If you haven’t been making regular backups to date, you can try the method provided on this Apple page, in the “Instructions for backing up to an external hard disk via Disk Utility” section. If you’re not already making regular backups, then I’d highly recommend purchasing an external disk for use as a Time Machine backup destination once you’ve gotten this resolved, so that this sort of problem would be more easily resolved in the future.

Lightroom CC was downloaded and installed but will not start. No splash screen, no nothing.

Just downloaded and installed lightroom CC. When I double click the icon nothing happens. No splash screen or anything. Ideas?

Nope. Doesn't seem to try to open anything. I have also gone to the executable, right clicked it, and open. Nothing happens.

Can download, and install, but will not load any page except for mozilla.

When i download and run the install, all seems to go well until firefox loads. The only page that loads is the Mozilla page. When i try to go to any other site, it has a problem loading page error. This would be on a Windows 7 system.

Hello, chvbob, and thanks for contacting Mozilla Support.
You may try to disable IPv6.
To disable IPv6, change the preference network.dns.disableIPv6 from "false" to true . Here are the steps:
1. Type about:config in the address bar, press Enter.
2. Find network.dns.disableIPv6 in the list.
3. Right-click -> Toggle.
4. Restart your Mozilla application and try again.
If this doesn't work, you can re-enable IPv6 by resetting the preference to "false" (double-click to toggle).
[https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Here]'s an interesting article about another problems, including IPv6, that may help you if the first advice didn't work.
Please, make sure you check everything in the article and contact us again if none of the solutions worked.
This is FJM8 from Mozilla Support, thank you for contacting us and have a nice day!

How and where do I download and install a DVD R Drive for Windows 7 dual boot?

I was prompted to have a DVD R Drive in order to burn the ISO of Windows 8 Consumer Release Preview on my Windows 7 running operationg system on my MacBook Pro. I just realized that I do not have the driver when I checked "My Computer". Hence, I could not burn the ISO file onto my blank DVD.

you can if you have 30-40GB free space use the setup program to install 8 and archive 7, that leaves 7 there in place.

If I download and install free apps it asking for credit card verification. I don't want to give me credit card what to do., If I download and install free apps it asking for credit card verification. I don't want to give me credit card what to do.

All these days all the free apps I am able to purchase without any difficulty. From today I tried downloading free app it's asking for credit card verification even for free app purchase. In the time of creating the account I have selected None option.
I even tried creating a new account but the none option in the card details peace is not available.
You apple iPad support customer care no person is picking the call. 18004250744
Please help me on this issue.

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you have one (very important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must use new Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

How do I download and install MPEG-2 TS Codec for PE7.0 ?

Please help!
I recently bought a Hauppauge HD PVR 2 gaming edition and it captures video in the MPEG-2 TS format however I can't import these files into Adobe Premiere Elements 7.0 because I get the error message that the proper Codecs aren't installed.
I've done a google search in an attempt to figure it out and I downloaded something called G-Spot because another forum said it was the solution but I have no idea what it does or how it works so its basically useless to me. I've spent the past 2 hours trying to find a solution and I keep coming up with nothing.
I have very little knowledge about codecs and stuff like that so I need some expert step by step instructions on how to get these MPEG-2 TS files working in my PE7 program!
I appreciate any and all help, thanks in advance!
-Zomb-e

ZOMB-E
The gspot utility is an excellent utility for sorting out the type of issue that you present. There should not be any problem downloading, installing it, and using it.
Did you download from:
http://www.headbands.com/gspot/
Did you have any problems installing it. It should be straight forward.
If you have gotten its desktop icon, then double click that icon to get the following dialog. (If you get an intermediate dialog for "Run", click "Run". Of immediate importance is what is in the fields for Video Codec, Name, and Status and Audio Codec, Name, and Status. On some occasions gspot has been know to give an incomplete readout. Let us see if it will give us a full readout in your case.
For overall video properties, then the Media Info (tree view) video properties readout can be very valuable.
http://mediaarea.net/en/MediaInfo
Although codec is mentioned in your error message, the MediaInfo may give a broader insight into what is going on with your choice for capture format, including Video and audio compression, frame size, frame rate, aspect ratio, file extension, duration, interlaced or progressive, etc.
We will be watching for your follow up. The answers will be in your details.
Thanks.
ATR

Repair and Install - Disc 2 not asked for

I just completed a repair install of OS 10.3.9 on a friends PowerBook G4. Everything seems to be working fine, but I expected the process to request the Software Install and Restore Disc 2 of 2 after the first disc was finishing installing the operating system.
Does anyone know what is on Disc 2 of 2, and if the installer should have requested it after Disc 1 completed?
Thanks!

TinaJo:
I can't remember what is on Disk 2, but I believe there are additional applications, like AppleWorks. If you did not choose to install additional applications your disk would not be needed.
If your OS is running fine, and you don't notice anything lacking, you are likely in good shape.
Good luck.
cornelius

About downloading and installing the Adobe Help Manager for CS6

Because the Adobe help manager essentially ceased functioning as part of my Adobe CS6 installation I had to uninstall it. Now I am having great difficulty to locate the Adobe Help Manager on any of the Adobe download sites. Although I have the Adobe media disks for CS6, I don't want to reinstall the entire suit just to get back the Help manager

There is no other way. AHM only comes with teh suite install.
Mylenium

Where to download and install locally one note 2013x64 for w8.1?

Similar Messages

Maybe you are looking for