Where to download "netscape directory server 4.11 or later"

Hi, there,
I just want to test some ldap functions on windows 2000. I find some guys said Netscape Directory Server 4.11 is a good choice. Where can I download a evaluation version? I can't find it on Netscape.
Thanks.

Just go to www.iplanet.com

Similar Messages

Where can i download netscape directory server 4.11 for solaris 2.6

i cannot find it is www.iplanet.com.
Thanks!!

Why you want to have NDS 4.11? Any version of the NDS 4.1x will support Solaris 2.6 and 8. This version is nolonger available in iplanet's site. I suggest you to get NDS 4.13 or later version. At iplanet's web site, you will find the latest version, 4.16. Also, you will find 4.13 from Solaris 8's CD ording from Sun's reseller.
Lucas

Where is iPlanet / Netscape Directory Server ?

Any information ?

Hi,
The SunOneDirectory Server is commonly called iPlanet, and you can find the last version in:
http://wwws.sun.com/software/download/products/3ee79e69.html
Regards,
kifwet

Unable to use a custom security realm with Netscape Directory Server in WebLogic 7

I have all users and groups stored in a Netscape LDAP server (version 4.1.6 on
Solaris 8), so I want to create a custom security realm in WebLogic 7 (also run
on Solaris 8) which uses my LDAP server as the Authenticator. I tried this by
using the Admin Console and followed exactly the steps in Chapter 3 of the "Managing
WebLogic Security" doc. However, when I rebooted WebLogic and logged into the
Admin Console again and clicked the Users node under my custom realm, I saw this
message in the right-hand pane: "There are no Authentication providers available
that support the creation of Users". Also, I don't see my custom realm in the
dropdown list under mydomain -> Security tab -> General tab -> Default Realm.
What did I do wrong? Also, where does WebLogic store the custom security realm
info? It is definitely not in config.xml.
Thanks,
Eric Ma

Thanks for the info.
I wonder when they will fix it.
Jakub
U¿ytkownik "Eric Ma" <[email protected]> napisa³ w wiadomo¶ci
news:[email protected]..
>
According to BEA Tech Support, a known bug prevents the WLS 7 AdminConsole from
displying users and groups defined in Netscape Directory Server.
Eric Ma
"Jakub Wroniszewski" <[email protected]> wrote:
I have the same problem.
Any new ideas?
Rgds,
Jakub
U¿ytkownik "Eric Ma" <[email protected]> napisa³ w wiadomo¶ci
news:[email protected]..
Now I doubt my custom security realm is actually using the NetscapeDirectory Server
as the authenticator. Unlike in WebLogic 6.1 Admin Console, whereclicking on
the Users node displays all users in the LDAP server, in WebLogic 7I keep
getting
the message "There are no Authentication providers available that
support
the
creation of Users." Any suggestions?
"Eric Ma" <[email protected]> wrote:
Never mind. I tried again by following the steps outlined at
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.deve
l
oper.interest.security&item=8463&utag=
and it seemed to have worked for me.
"Eric Ma" <[email protected]> wrote:
I have all users and groups stored in a Netscape LDAP server (version
4.1.6 on
Solaris 8), so I want to create a custom security realm in WebLogic7
(also run
on Solaris 8) which uses my LDAP server as the Authenticator. I
tried
this by
using the Admin Console and followed exactly the steps in Chapter3
of
the "Managing
WebLogic Security" doc. However, when I rebooted WebLogic and logged
into the
Admin Console again and clicked the Users node under my custom realm,
I saw this
message in the right-hand pane: "There are no Authentication
providers
available
that support the creation of Users". Also, I don't see my customrealm
in the
dropdown list under mydomain -> Security tab -> General tab ->
Default
Realm.
What did I do wrong? Also, where does WebLogic store the customsecurity
realm
info? It is definitely not in config.xml.
Thanks,
Eric Ma

Weblogic Integration with Netscape Directory Server - Help URGENT

Prashant,
Yes, I did. Did you copy the ldaprealm.properties to the same place as where
your weblogic.properties is located by default. The original sample file is
located in examples/....directory. After your changes are made copy the file
to c:/weblogic directory.
Hope this helps.
-Sunil .K
Prashanth <[email protected]> wrote in message
news:[email protected]...
Hi,
Can anyone who's tried using the LDAPRealm to talk to Netscape Directory
Server 4.1tell me exactly what are the steps that one needs to follow toset
this up:
1. Changes in the ldaprealm.properties file
2. Changes in the weblogic.properties file
3. Changes on NDS side, if any
Erorr I am getting:
Thu Jun 29 10:24:53 EDT 2000:<I> <System Props> weblogic.class.path =
d:\weblogi
c\lib\weblogic510sp3.jar;d:\weblogic\license;d:\weblogic\classes;d:\weblogic
\mys
erver\serverclasses;d:\weblogic\lib\weblogicaux.jar
Thu Jun 29 10:24:53 EDT 2000:<I> <System Props> weblogic.system.home =
d:\weblog
ic
Thu Jun 29 10:24:53 EDT 2000:<I> <WebLogicServer> Loaded License :
D:/weblogic/l
icense/WebLogicLicense.xml
Thu Jun 29 10:24:53 EDT 2000:<I> <WebLogicServer> Server loading from
weblogic.c
lass.path. EJB redeployment enabled.
java.io.FileNotFoundException: ldaprealm.properties (The system cannotfind
the
file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java, Compiled
Code)
at
weblogic.security.internal.RealmProperties.getProperties(RealmPropert
ies.java:37)
at
weblogic.security.internal.RealmProperties.<init>(RealmProperties.jav
a:20)
at
weblogic.security.ldaprealm.LDAPDelegate.configureProps(LDAPDelegate.
java:78)
at
weblogic.security.ldaprealm.LDAPDelegate.<init>(LDAPDelegate.java:198
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:35)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:79)
at weblogic.security.acl.Realm.getRealm(Realm.java:57)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1744)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
--------------- nested within: ------------------
weblogic.security.ldaprealm.LDAPException: ldaprealm.properties notfound -
with
nested exception:
[java.io.FileNotFoundException: ldaprealm.properties (The system cannot
find> the> file specified)
at
weblogic.security.ldaprealm.LDAPDelegate.configureProps(LDAPDelegate.
java:82)
at
weblogic.security.ldaprealm.LDAPDelegate.<init>(LDAPDelegate.java:198
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:35)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:79)
at weblogic.security.acl.Realm.getRealm(Realm.java:57)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1744)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.IllegalAccessError:
weblo
gic.security.ldaprealm.LDAPException: ldaprealm.properties not found -with
nest
ed exception:
[java.io.FileNotFoundException: ldaprealm.properties (The system cannot
find> the> file specified)
at weblogic.security.acl.Realm.getRealm(Realm.java:86)
at weblogic.security.acl.Realm.getRealm(Realm.java:57)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1744)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.IllegalAccessError: weblogic.security.ldaprealm.LDAPException:
ldaprea
lm.properties not found - with nested exception:
[java.io.FileNotFoundException: ldaprealm.properties (The system cannot
find> the> file specified)
at weblogic.security.acl.Realm.getRealm(Realm.java:86)
at weblogic.security.acl.Realm.getRealm(Realm.java:57)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1744)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
WebLogic Server terminated with an abnormal condition of 1
Hit return to continue...>>>>>>>>>

Migrating Netscape Directory Server 4.1 to a new server

Hi,
In the current production environment, we are using Netscape Directory Server 4.1 as the authentication with Siebel CRM system. The server hardware is old and there is a need to refresh the server. As Netscape Directory Server is the only supported/ certified LDAP with embedded functionalities in Siebel Financial Services 6.0.2.300, we are planning to upgrade only the server hardware and migrate all the user information from old server and the new one, with Netscape Directory Server 4.1 remained.
I have studied the Netscape Directory Server 4.1 Deployment Guide and gone through the migration procedures, looks like the procedures are only applicable for migrating Netscape Directory Server to a newer version. There are no specific procedures mentioned for migrating Netscape Directory Server to the new server hardware with the same directory server version.
I am seeking for detailed procedures of migrating Netscape Directory Server 4.1 to a new server hardware with the same directory server. Anyone has done this migration before? I thank you in advance for your valuable feedback.
Sincerely,
Julie

Luckily, I have the technical documentation in hand, which contains all the configuration of the current server. So I need to use "db2ldif" to export the data. I am currently testing on the migration by following these steps:
1. Install the new server.
2. Stop the Netscape Directory Server and Netscape Administration Server services in old server.
3. Copy the slapd-<server_name> folder from old server to a temp location of new server.
4. Take the old server offline.
5. Configure new server to have the exact configuration as the old server.
6. Backup the existing slapd-<server_name> folder in new server, copy the slapd-<server_name> folder from the temp location to C:\Netscape\Server4 directory of new server.
7. Start the Netscape Directory Server and Netscape Administration Server services in new server.
Will try out your suggested method. Thank you so much for your feedback.
Regards,
Julie

Weblogic server 5.1.0 with sp8 does not work with LDAP (Netscape Directory Server 4.12)

I have weblogic server 5.1.0 with the sp8 running on Windows NT server 4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect to ldapse
without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError: weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
And here is the my ldaprealm.properties file
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic 5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

BEA support just gave me the solution.
They told me to uncomment out the line
server.alias=netscape
in the ldaprealm.properties file
And I am able to start weblogic with my NIS
Thanks
"Enrique" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Have you try to remove the "system" user on the LDAP server?
Regards.
"Honghai Zhang" <[email protected]> wrote:
I have weblogic server 5.1.0 with the sp8 running on Windows NT server
4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:***************************************************************************
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect toldapse
without a principal to authenticate as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError:weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate
as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)***************************************************************************
And here is the my ldaprealm.properties file////////////////////////////////////////////////////////////////////////////
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))////////////////////////////////////////////////////////////////////////////
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

Setup connection factory and topic in Netscape Directory Server

I'm using Netscape Directory Server(NDS) and WLS5.1.
What should I setup in the NDS in order to lookup the connection
factory and topic in WLS?
Thanks

My first suggestion is to find an log on de NDS server (maybe it states a reason for the closing the connection)
Otherwise use Ethereal to examen the trafic between the to machines. Maybe that helps.
Or check if the NDS wants 2-way authentication and is trying to get your certificate as wel.

Differences between SunONE, iPlanet and Netscape Directory Server

What are the differences between SunONE, iPlanet and Netscape Directory Server?
When I go to docs.sun.com - Products Categories, I saw that they've documentation regarding with SunONE, iPlanet, Netscape Directory Server listed under Directory Server.
I know that they're all different directory server, but is it one newer than other? If I'm not wrong, I assumed that Netscape transformed into iPlanet, and then from iPlanet, it transformed to SunONE. If that is the case, is that mean that all of it's console and how it works should be very similar?
Thanks!

That is exactly what I thought.
so when people refer SunONE Directory Server 5.1, then that's mean iPlanet Directory Server 5.1, right?
Because I'm looking at Solaris 9's specification and it mentioned that it bundled with SunONE Directory Server 5.1.
Thanks for answering my question! :)

Netscape Directory Server 4.x with sun blueprints script - still no luck

I installed the directory server 4.x, ran suns NATIVE ldap script for Solaris 8. I don't think it generated the "Solaris Native" profile. . how can I tell. When I go to ldapclient a client machine, I get the following:
parsing -P option
findDN: begins
findDN: calling __ns_ldap_default_config()
found 2 namingcontexts
findDN: __ns_ldap_list(NULL, "(&(objectclass=nisDomainObject)(nisdomain=carfund.com))"
rootDN[0] dc=carfund,dc=com
found baseDN dc=carfund,dc=com for domain carfund.com
Servers addresses 172.16.100.233
About to configure machine by downloading a profile
save sysinfo
save stat(/etc/nsswitch.conf,
save /usr/sbin/nscd -K
save /usr/bin/pkill -9 nscd
save rename(/etc/nsswitch.conf, /etc/nsswitch.conf.orig)
save stat(/etc/defaultdomain,
save rename(/etc/defaultdomain, /etc/defaultdomain.orig)
save stat(/etc/.rootkey,
No /etc/.rootkey file!
save stat(/var/nis/NIS_COLD_START,
No /var/nis/NIS_COLD_START file!
namelen 11
save stat(/var/yp/binding/carfund.com,
No /var/yp/binding/carfund.com directory!
download save() of systems configuration suceeded.
download ret 2
download p 0xffbef4c4
download p Object not found
The download of the profile failed, recovering system state.
recover stat(/etc/defaultdomain.orig, )
recover stat(/etc/nsswitch.conf.orig, )
recover open(/etc/defaultdomain.orig, )
recover read(/etc/defaultdomain.orig, )
recover old domainname carfund.com
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/nis/NIS_COLD_START.orig, )
recover stat(/var/yp/binding/carfund.com.orig, )
recover ldap -1 nis+ -1 yp -1
recover rename(/etc/nsswitch.conf.orig, /etc/nsswitch.conf)
recover rename(/etc/defaultdomain.orig, /etc/defaultdomain)
Any ideas?
Thanks,
Gary Walters
FYI .. I really want to use Directory Server 5.1 on my Solaris 8 machine, but can't seem to get it even close.

Followup:
I installed the netscape version of Directory Server and then ran the blueprints script to set it up for native LDAP. I have found a few issues.
1.) I can not log into the console as Directory Manager ... I have to use admin? I think this could be a problem because when it goes to set the permissions for proxyagent, I think it uses the Directory Manager login so when I go to see the permissions it created, I don't see that entry. When I go to create one, it gives me: insuffcient 'write' priveledge to the 'aci' attribute of entry.
2.) I can not generate a profile and use ldapadd to add it, I get the following errors:
ldap_gen_profile -P default -b dc=mydomain,dc=com -D \ "cn=Proxyagent,ou=profile,dc=mydomain,dc=com" -w password \ -a simple xxx.xxx.xxx.xxx > default.ldif
Once that is done, you will have to edit the file and take out all the whitespace at the beginning of every line due to a bug. Once you are ready to add the profile, just run:
ldapadd -D "cn=Directory Manager" -w password -h ldapserver \ -p 389 -f default.ldif
I ran the steps above (substituting correct entries) and when I do the ldapadd -D command, I get the following error:
adding new entry cn=default,ou=profile,dc=carfund,dc=com ldap_add_s: Object class violation
3.) If I try to use ldapclient -v -P command on a client machine, I get the following errors:
/usr/sbin/ldapclient -v -P "Solaris Native" ###.##.###.###
parsing -P option
findDN: begins
findDN: calling __ns_ldap_default_config()
found 2 namingcontexts
findDN: __ns_ldap_list(NULL, "(&(objectclass=nisDomainObject) (nisdomain=carfund.com))" rootDN[0] dc=carfund,dc=com
found baseDN dc=carfund,dc=com for domain carfund.com
Servers addresses ###.##.###.###
About to configure machine by downloading a profile
save sysinfo
save stat(/etc/nsswitch.conf,
save /usr/sbin/nscd -K
save /usr/bin/pkill -9 nscd
save rename(/etc/nsswitch.conf, /etc/nsswitch.conf.orig)
save stat(/etc/defaultdomain,
save rename(/etc/defaultdomain, /etc/defaultdomain.orig)
save stat(/etc/.rootkey,
No /etc/.rootkey file!
save stat(/var/nis/NIS_COLD_START,
No /var/nis/NIS_COLD_START file!
namelen 11
save stat(/var/yp/binding/carfund.com,
No /var/yp/binding/carfund.com directory!
download save() of systems configuration suceeded.
download ret 2
download p 0xffbef4c4
download p Object not found
The download of the profile failed, recovering system state.
recover stat(/etc/defaultdomain.orig, )
recover stat(/etc/nsswitch.conf.orig, )
recover open(/etc/defaultdomain.orig, )
recover read(/etc/defaultdomain.orig, )
recover old domainname carfund.com
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/nis/NIS_COLD_START.orig, )
recover stat(/var/yp/binding/carfund.com.orig, )
recover ldap -1 nis+ -1 yp -1
recover rename(/etc/nsswitch.conf.orig, /etc/nsswitch.conf)
recover rename(/etc/defaultdomain.orig, /etc/defaultdomain)
Any ideas .. I still want to get Version 5.1 working , but I may have to settle for 4.x since I am not running Solaris 9 and I can't upgrade at this time.

Netscape directory server startup failture

Hi,
I wonder if anyone can help me.....
We are running Netscape 4.1 under solaris 2.6, and basically what has
happened is that the LDAP server crashed out because it was unable to
write the db file because the file system was full up.
When I try and restart the server I get the following message in the
log file
[11/Sep/2001:08:40:30 -0400] - Netscape-Directory/4.1 B99.262.2243
starting up
[11/Sep/2001:08:40:31 -0400] - Detected Disorderly Shutdown last time
Directory Server was running, recovering database.
[11/Sep/2001:08:40:53 -0400] - Database Recovery Process FAILED. The
database is not recoverable.
[11/Sep/2001:08:40:53 -0400] - start: Failed to init database, err=22
Invalid argument
[11/Sep/2001:08:40:53 -0400] - Backend 'ldbm' failed to start. (-1)
Does anyone have any ideas?
Sachin

Hi Vikram,
Thanks for your quick response. Sorry but i missed to metion that the memory usage was 96% and then i removed some of unnecessary files from the server so that LDAP server can run properly. But still it is giving me the same error. Please help me out. Thanks in advance
Sachin

Where is download Netscape Mozilla - required by installer of Evrsoft First Page 2006?

During installation of Evrsoft First Page 2006 Version: 3.00 the following requirement was raised: " '''If you plan to use Mozilla to preview web pages, you must download and install Netscape Mozilla".'''
I can't find place to download Netscape Mozilla.
Regards
Oskar Kula

Kind of weird cause Netscape isn't used much. Try this http://www.softpedia.com/get/Internet/Browsers/Netscape-Browser.shtml

How to Configure Directory Server 6 In configure later mode

Hi ,
I would like to know how to configure the directory server in configure later mode.
I have done it in JES4 using the directoryserver command. Which is the command to be used in JES5 for configuring the directory server after the binaries are installed.
It would be great if anyone could refer me to the documentation for the configure later mode.
Thanks,

There has been quite a few posts on blogs.sun.com with regards to configuring DS instances after installation.
It is part of the installation guide as far as I can remember.
Check <http://blogs.sun.com/marginNotes/entry/the_version_6_cli%3A_getting>
Regards
Ludovic,

Where to download netscape.javascript.JSObject?

I have this statement in my Java program
import netscape.javascript.JSObject , and when i cannot compile. May I know where I can download this package?

Hi,
Check out below links, i hope it will help you.
http://docs.iplanet.com/docs/manuals/js/server/jsref/lcjsobj.htm
http://www.netscape.com/eng/mozilla/3.0/handbook/javascript/packages.htm#1007459
http://www.mozilla.org/oji/MRJPlugin.html
http://developer.netscape.com/docs/technote/javascript/liveconnect/liveconnect_rh.html
http://www.innovation.ch/java/HTTPClient/disp_html.html
Thanks,
Dakshin.

Where to download the SQL Server 2000 plug-in for Migration Workbench

Dear All,
I am new to Migration WorkBench, I want to migrate the SQL Server 2000 database to Oracle 9i. When i start the Migration WorkBench, it requires me to select the plug-in (SQL Server) for the migration source. Before i have download and install the Access plug-in for testing. Can anybody tell me where i can find the SQL Server 2000 Plug-in for migration workbench.
thx.
Alan,

here on OTN; on the same page like all the other plugins:
http://otn.oracle.com/software/tech/migration/workbench/htdocs/utilsoft.html

Where to download "netscape directory server 4.11 or later"

Similar Messages

Maybe you are looking for