Where to download the patch for Oracle Installer
Is there someone who knows where I can find the patch for older versions of Oracle Installer, which has Y2K problems. Thanks!
Hi again,
I forgot you can also download the compliant installer from this site if you go to Support page for Developer 6 ( http://technet.oracle.com/products/developer/)
regards
Warren
Similar Messages
-
Where to download the MPIxO for Oracle Sparc T5-2 solaris 11.1
Hi,
I would like to ask help on how to dowload and apply the MPIxO driver for Oracle Sparc T5-2 server with Oracle Solaris 11.1 installed.
Thanks
Regards,
AndrewHi Marcel,
Thank you for this information. I'll check it. I just want to know if do I need to activate the MPXIO with this setup. Both controller of storage is connected to a SAN switch and only 1 port of HBA is connected to SAN switch. With the format output, it has two disk output.
Please help me if this setup is correct to eliminate single point of failure for storage connectivity.
The HBA card has two port and each port has different WWN. We are planning to connect both WWN with the same LUN from storage. Is this advisable?
Regards,
Andrew -
Where to download the oracle8i for sun x86
hi,
where to download the oracle8i for sun x86?
thanksHi Antra,
There are no bootable images on CCO to download, on CCO you will just find the upgrade like in this:
http://www.cisco.com/cisco/software/release.html?mdfid=282886765&flowid=37342&softwareid=282886751&release=8.5%285%29&relind=AVAILABLE&rellifecycle=&reltype=latest
but if you are looking for media for 8.5 , you should be able to place a order using the PUT tool and if still issues kindly open an TAC case and someone will help you for the same.
HTH
Arun -
Where can I download the Dirver for Oracle Version on UNIX DG/UX
Hi,
Our Oracle DBMS and other application are running on DG/UX Unix OS. Can someone tell me where to download the right JDBC version
for it.
Thank you
BinhMinhYou can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
-
Where can I get the patch for Oracle JMS to work with RDBMS 9.2.0.1
Hi,
In the following extract from Oracle documentation the patch is mentioned that needs to be applied.
"You must apply a server-side patch for Oracle JMS, which ships with Oracle9iAS Release 2 (9.0.3) and the OTN release of OC4J, to work with an RDBMS 9.2.0.1 database. This patch is documented as bug 2513629; see the Metalink Web site or contact Oracle support for more information. However, it is strongly recommended that users move to RDBMS 9.2.0.2 when it is available. Users do not need to apply any server-side database patches when running with RDBMS 9.2.0.2."
Where I can get this patch?
Is it RDBMS patch or OC4J patch?
I don't have access to a Metalink.
Thanks a lot,
AndreiCheck out the configuration on the mapping. There you can create a data file. Do that and fill out the other parameters for the bad and discard file in that node.
Jean-Pierre -
i have the Oracle Internet Developer Suite and have CSI no where can i download the patch
ThanksGo to service.sap.com/support
Then click on Downloads
In the tree on the left, select:
SAP Software Distribution Center
Download
Support Packages and Patches
Search for Support Packages and Patches
Entry by Application Group
Then in the main frame select
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
The patch 09 is not included there, but you will find the latest 3 patches, which are 13, 14 and 15.
Try downloading one of these.
you need an Service Marketplace user with authorization to download to do this. If you haven't then contact your Basis team.
Best,
Ralf -
I'm guessing few people use this version of Aperture. Here's what happened because I use it. Apple spent several hours with me before I found the link to this software update.
Then I downloaded the patch. Then my computer would not install it as security changes needed to be changed from the standard: "only install software from the app store and identified developers." To install this patch, I needed to change settings to show, "allow applications downloaded from ANYWHERE."
This surprised me.
I ordered four books with this software today, spending over thirty dollars for each. For three of the four, I needed to change the order after it was processed by Apple so that the three gift books would be shipped to relatives instead of to me. NOTE THAT ADDING OTHER ADDRESSES WITHIN this version of Aperature doesn't change any shipping details in the actual order.
Since the rep told me the newer version is only about $90, I may spring for it. Or I might just give up on Aperture entirely and buy ADOBE Lightroom, since this application has been BUGGY.Designer Handbag<BR>
Rolex Replica<BR>
Cheap handbag<BR>
Swiss-made<BR>
replica vuitton<BR>
Replica Watche<BR>
Designer Replicas<BR>
Replica Watch Sale<BR>
Louis Vuitton<BR>
Fake Rolex<BR>
Wholesale Replica<BR>
Swiss Rolex<BR>
Louis Vuitton Purses<BR>
watch part<BR>
Wholesale Louis Vuitton<BR>
Authentic Swiss-Made<BR>
Counterfeit Louis Vuitton<BR>
buying watch<BR>
Fendi Replica<BR>
replica Submariner<BR>
Vuitton Bag<BR>
rolex air king<BR>
LV Knockoffs<BR>
rolex Day Date<BR>
LV bags<BR>
rolex Daytona<BR>
replica wallet<BR>
rolex datejust<BR>
replica purse<BR>
rolex explore<BR>
vuitton wallet<BR>
rolex milgauss<BR>
knockoff handbags<BR>
rolex GMT<BR>
Burberry Handbags<BR>
rolex sea dweller<BR>
Burberry Wallets<BR>
Rolex Yachtmaster<BR>
Chanel handbag<BR>
Swiss Replica<BR>
Fendi Handbags<BR>
Tag Heuer Replica<BR>
Gucci bag<BR>
Omega Watches<BR>
J.P.Tods -
Where to download the WebexNode for MCS8.5
Hi all,
I have a WebexNode for MCS 8.0, and need to upgrade to 8.5.
I'm trying to find where can I download the WebexNode for MCS 8.5.
Have anyone found it in the software download? I already tried to find there but no success. (
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Installing_the_Cisco_WebEx_Node_for_MCS#Upgrading_the_Software_for_the_Cisco_WebEx_Node_for_MCS)
I already tried to find also in the Product Upgrade Tool, but no success.
Please help.
Regards,
AntraHi Antra,
There are no bootable images on CCO to download, on CCO you will just find the upgrade like in this:
http://www.cisco.com/cisco/software/release.html?mdfid=282886765&flowid=37342&softwareid=282886751&release=8.5%285%29&relind=AVAILABLE&rellifecycle=&reltype=latest
but if you are looking for media for 8.5 , you should be able to place a order using the PUT tool and if still issues kindly open an TAC case and someone will help you for the same.
HTH
Arun -
Can some tell me where to find the documentation for Oracle forms 6i,11g
Hi Everyone
Can someone please tell me where to find the online documentation for Oracle Forms 11g and 6i .
Thanks in advance
GautamMost of the design time documentation is included in the Design-time tools (Builders). Specifically in the Builder Online Help. This information is no longer available on a web site. As for Forms 6i, hardly any of that information is available on the Oracle site any longer. That version has been obsolete for several years. You can find some of the old deployment documentation for 6i (6.0.8):
http://www.oracle.com/technetwork/developer-tools/forms/documentation/techlisting-084882.html -
Where to find the doc for Oracle server security
I am preparing for Oracle 9i upgrade OCP and looking for
the document which talks about Oracle server security
which includes Application context, Security Role and etc.
Thankshi,
this is the portal content management forum. for your database question please use the database forums:
http://forums.oracle.com/forums/index.jsp?cat=18
thanks,
christian -
I see the page labeled "manage" my subscription, but I can't figure out where to go to find the link to download the software to my laptop. I have it installed and running on my desktop machine, but I thought I could run in on both my desktop and my laptop using the same subscription.
sign in with your adobe id and download, https://creative.adobe.com/
-
I am trying to find at least the trial version so that I can enter the serial number that I have on the back of the case and activate the full version so I can get some work I need to get done finished. My laptop was thrown away after a flood in my basement and I believe the cd was still in it. I don't recall ever taking it out.
Forget your existing disc and serial number. They won't work.
Download the new non-activation version of CS2 (applies to CS owners as well) from
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Install then enter the new serial number provided at that link. -
HT1338 how to update snow leopard to lion and where to download the os for lion
im wondering is it possible to update my mac pro from 10.6.8 to 10.7 lion? i wanted to update to mountain lion but from the specs of my computer and from apple themselves that i can only go as far as Lion. Is there a site i can download the full lion OS or how to update it? i tried through software update but it says my system is up to date. any help i would appreciate it. thanks.
As Mountain Lion is the current OS and therefore the only one showing in MAS, Lion can still be purchased but you need to call Apple and purchase it over the phone; they will then send you a redemption code which you can use in Mac App Store to download it. The cost is $19.99 (I believe).
-
Link To Download the documentation for Oracle Master Data Management
Hi,
I require to make a hierarchy for Processes in Master Data management.
Where do you suggest will I get the user guides for all the Softwares in MDM.?
Thanks,
AeronLooks like product related question - not a question about the download service which is the topic of this forum.
MDM suite has a range of products so you need to be more specific when looking.
You might want to post in a relevant forum category, if one exists for your specific product, such as:
https://forums.oracle.com/forums/category.jspa?categoryID=157
Please do not hijack someone's thread ({thread:id=2354806}) - instead start a new one
Likely place to look for download (which should include documentation) in this case is edelivery.oracle.com.
Some docs are also available from:
http://docs.oracle.com/cd/E18727_01/nav/scm.htm
Edit:
some additions to docs and other thread
Edited by: orafad on Mar 21, 2012 11:30 AM
Edited by: orafad on Mar 21, 2012 11:32 AM
Edited by: orafad on Mar 21, 2012 11:34 AM -
Hi to all,
please can you please tell me where to download the patch MS14-021?I have to install this patch to my workstations's network.
Thank you.
RegardsHi once more,
i also read that i need to install the cummulative patch ms 14-018 for microsoft before installing the security patch MS14-021.Can you please show me where to find the link to download the cummulative patch ms14-018?
Thank you.
Regards.
Franck BRICE
Hi Franck,
Here is the introduction of this update:
Microsoft Security Bulletin MS14-018 - Critical
https://technet.microsoft.com/en-us/library/security/ms14-018.aspx
You can find the related msu file as what I mentioned before for your original question.
Kate Li
TechNet Community Support
Maybe you are looking for
-
Windows 7 Enterprise with Visual Studio 2008 and 32 bit ODBC access
I have a 32 bit ODBC used to access Progress databases. We have to use the 32 bit driver. My development had been run on XP in the past with no issues. I have moved to a Windows 7 Enterprise workstation currently and cannot access through my app.
-
Error in w.tax while posting entry in f-53
Hi All, When i'm trying to post payment to vendor in f-53 i got the following error when i selected the line item among the displayed items " With holding tax key missing one of following entry. Please help me out as i need to solve this on urgent ba
-
Why zero is assigned for not a public holiday in public holiday class
why zero is assigned for not a public holiday in public holiday class
-
Recover database after lossing system tablespace without backup
Hi My database fail because of hardware failure and then system tablespace corrupted. other tablespaces and control files are OK. Can I recover my database without backup of system tablespace?
-
I need help activating serial number on a new computer after deactivation from an old computer
I deactivated and checked the box for remove entire product from my old computer and now the serial number is saying it is not valid when I try to use it on my new computer even after registering it, any ideas?