Where to enter PUK code to unlock sim card

Got a new Iphone5.  My other is Iphone4 and not on service with ATT any more.  I have a PUK code to unlock it but don't know where to enter the number.

PUK does not unlock a phone.  It unlocks a SIM. 
The only way to use your iPhone 4 with a carrier besides AT&T is to contact AT&T and see if you qualify to have the phone unlocked.

Similar Messages

  • Enter code for unlocking sim card

    i saw this option in the menu of the SETTINGS of my n900 since i update its firmware. i enter the pin code of my my sim but it says wrong code.i also tried the lock code but its wrong also. i am just worried coz i will travel to other country next week,and would not be able to use another sim card for my n900. i didnt tried to put the new sim card yet because it will automatically overwrite my prepaid internet settings.
    i just want to know if i can still use other sim card without asking for a code. is my phone locked now since i update the firmware?
     thanks!

    I'm not 100% sure but I think it's for any future simlocked handsets where you'd enter the unlock code from your network.
    Also I wouldn't worry about your internet settings when switching simcards because when you switch back, your handset should reset all of your internet setting back to normal again
    Message Edited by foxmeister on 23-Jan-2010 01:59 PM
    If this Post is helpful. A click on the White Kudos star is always Appreciated
    Last Nokia: Nokia Lumia 800
    Current Phone: A Non Nokia Device
    Previous Phones:Don't Ask ;-)

  • How can I get the PUK code for my SIM card?

    I had to do a factory reset this morning on my DROID RAZR. As I was going through this afternoon setting everything up again, I saw that I could set a password for my SIM card. I thought it was asking me to create a password, not enter a default one. So needless to say, I locked myself out of my phone, and I need the PUK code. I cannot call, this is my only phone, and I cannot go to a local store today or tomorrow. I also cannot go the next two days without my phone. I've tried doing a chat, but because it's only sales that communicate through the chat, they were less than helpful and told me I can only fix this by going to a store, which I can't do.
    So, can I chat with anyone to get my PUK code today via internet?

    Why is this working for everyone, but me? When I follow these instructions (and many others that I've found in this community -- which has been helpful with other matters thus far) There is no PUK or SIM information. I have an (ESN) and my phone number. that's it. Help! I'm in a rabbit hole!
    Many thanks for any support you can provide!

  • My ipod touch is stuck wontlet me enter my code to unlock it

    hellow 1st time on have question   my kids played with my ipod touch 1st gen how do i re enter my code to unlock it
    thank you 4 your help

    Connect the iPod to its syncing computer and restore the iPod via itunes.  If iTunes asks for the passcod and yu can't enter the passcode, place the iPod in recovery mode and then restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now?

    I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now? It worked fine before...

    natalieduffy wrote:
    it says 'your iphone could not be activated because the activation server cannot be reached'
    Typically this indicates a device that has been hacked to be unlocked or jailbroken.
    If that is the case, no support can be provided here.

  • HT201195 I entered the code for my gift card but I never used it,now I'm trying to use it but it's no there and doesn't let me redeem the code again. What can I do?

    I entered the code for my gift card but I never used it,now I'm trying to use it but it's no there and doesn't let me redeem the code again. What can I do?

    An iTunes gift card can only be redeemed once, you can't enter and redeem its code again. Since you redeemed the card you haven't bought anything (including IAPs and auto-renewing subscriptions), and your account doesn't show a balance ? You've tried logging out and back into your account and seeing if it shows then ?
    My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my iOS devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to). If the balance is zero then it might not be shown.

  • HT4061 My iphone 4 is lost, who can help me find the iccid code of the SIM card in my iphone,my iphone's IMEI:01**********117.  Thanks a lot.

    My iphone 4 is lost, who can help me find the iccid code of the SIM card in my iphone,my iphone's IMEI:01**********117. 
    plaese send the iccid code to my E-mail Box.
    Thanks a lot.
    <Personal Information Edited by Host>

    Will do, if that's the only option I have. Thanks for the quick response

  • Ive entered a code from a gift card and it is not taking it, ive tried iver and over double checking? what should i do?

    hi im stuck ive entered a code from a gift card and itunes store will not let me redeem it, ive tried it over and over making sure im putting it in right but still no luck. What should i do?

    Try here >  iTunes Store: Invalid, inactive, or illegible codes
    Scroll down to the bottom of the iTunes page. On the right you'll see a round flag icon.
    Make sure you have the correct country selected.

  • How to unlock sim card, how to unlock sim card

    w t how to unlock sim card, how to unlock sim card

    SIM cards are not locked, unless you have a lock put on it from the carrier. Maybe you are referring to unlocking the phone to use a different carrier? Please explain better.

  • Locked SIM:  need PUK code to unlock

    Anyone got an answer to this? AT&T recommends that i restore to default settings through iTunes. All my settings and contacts, etc. will all have to be re-synced. Anyway around that option?

    From AT&T page.How to unblock SIM card...
    You'll need your phone in hand to unblock your SIM Card.
    First, enter the 8-digit PUK code, then press OK/Yes.
    Note: Some Motorola phone users will need to enter *05 if "enter PUK" is not already displayed. After entering *05, then enter the 8-digit PUK code and press OK.
    Select a new PIN code, then press OK/Yes.
    Re-enter the PIN code, then press OK/Yes.
    If the codes were entered successfully, the phone is ready for use.
    Important: If the incorrect PUK (Pin Unlock Key) code is entered 10 times in a row, the SIM card will become permanently locked, and you must purchase a new SIM card. If your device is requesting PUK 2 please call Customer Care at 1-800-331-0500.
    Good Luck with it.
    Jim
    PB G3 "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM/ 8GB iPhone   Mac OS X (10.4.10)  

  • Where to enter PUK # on Droid 4

        Hello,
    I'd like to unlock my phone and I have my PUK and SIM code #s but I don't know where/how to enter them to unlock the phone.  Also, I have an extended manufacturers warranty through verizon, will unlocking my phone void that?
    Thanks!

    The PUK code only gives you the ability to get into your device when the SIM has been locked by code.
    You would follow these steps with the PUK code.
    http://support.verizonwireless.com/support/devices/knowledge_base.html/51782/
    Note that it doesn't have anything to do with "unlocking" the device in the manner that you might be thinking.  Using the PUK code will not affect the warranty.
    The Droid 4 can only be unlocked for international use.  It cannot be used on GSM networks in the US.

  • Where do I get the pass code to lock sim card

    I want to lock the SIM card when I'm not using the iPad...I have 1 attempt left .  Where do I get the pass code for a iPad mini?

    Have you read through all the information located here: http://support.apple.com/kb/ht1316

  • Droid Incredible 2 "Enter PUK code" error...

    Twice in one week my phone powered down on it's own and required a call to customer service to getit unlocked. WTH is going on?

    Hello DroidUser-1! The PUK error occurs when there is a problem with the SIM pin. Have you recently replaced the SIM card on your device, or has the SIM card on your device currently damaged?

  • How to enter PUK code onto my iphone

    I need to enter my PUK code onto my iphone. How do I do that? Thanks.

    Turn your phone off, then back on. You should be prompted to enter the PUK code.

  • Hide Command field (where users enter transaction codes in SAP GUI)

    In our requirement, the custom SAP transaction will be launched on CRM Web UI through transaction launcher technique (when users clicks a hyperlink on CRM UI)
    But business people are asking us to not provide the user to enter transaction codes in command field. They don't want User's see command field when the back-end SAP GUI is displayed on CRM UI through transaction launcher and they don't want the user to navigate to any transaction from the SAP GUI. Please let us know you comments on this. Is this possible, if so please guide me?

    Hi Madhu,
    This is a question for SAP basis.
    One work around could be that the the users who would use ITS screens should not have any other AUTH objects for executing other TCODES. And when they try to do so they will get an error message like you do in a normal SAP GUI.
    Basis can configure this by running a Auth Trace.
    Hope it helps.
    Thanks

Maybe you are looking for

  • Help in scheduling jobs

    Hi, I have an AQ queue process which queues data into a queue. The records go into this queue via a trigger on a table. I have also written a procedure to dequeue the records in bulk using the dbms_aq.dequeue_array. My question is regarding the sched

  • Used tip in fonts wiki; wrote to wrong file, need to see the original

    one night while bored i decided to use the lcd packages mentioned in our fonts wiki. wiki wrote:The "fontconfig-lcd" package enables by default the "lcddefault" filter. You can edit the /etc/fonts/conf.avail/10-lcd-filter.conf file and replace it wit

  • Setting Partition Arguments (log flags) using FSCRIPT??????

    Hi, I can't succeed in setting parameters in FSCRIPT that require quotes (as __-fl "(err:sh:*)"__: 1) SetPartArgs VisionFrontEnd "-fl aFile(err:sh:*) +(trc:user9:*:*) -fm (n:1024,x:800000,i:128)" This sets the line, but the partition can't start. 2)

  • Color Balance Adj Layer Characteristics Changed from CS4- CS5?

    Maybe some guru with better connections to Adobe knows the answer to this. (or maybe I just forgot). I just discovered (and I don't think it is pilot error) that the characteristic behavior of the Color Balance Adjustment Layer is different in CS5 th

  • Datasource 0WS_TAROBJ_ATTR does not extract any record

    I am using the datasource 0WS_TAROBJ_ATTR to get data from CRM to infoobject 0WS_TAROBJ. However, this extractor is not loading any record. According SAP information and some forum discussion, I have found that the datasource WS_TAROBJ_ATTR loads dat