Where to find a missing Scanner Utility

I recently updraded to Mountain Lion (10.8.2) and I seem to have lost my scanner utility. After upgrading to Mountain lion my old printer was not working but I had a new one coming so I didn't play around with it.
I am having no problem printing on the new printer but it doesn't want to scan. From looking at other Macbooks running Mountain Lion it appears that it should give me print/scan buttons above the printer name. As you can see in the picture below it is not there.
I have also included another picture where you can see that Scanner Utility is not an option.
I have tried doing a few different searches and haven't come acorss anyone else with this same issue.
Any insight would be greatly appreciated.

Still haven't been able to figutre this out. I deleted all of my printers and tried reloading the Brother shown in the picture above but that didn't do anything. It still doesn't give me the toggle between Print and Scan an the scanner utility isn't an option on the "window" dropdown.

Similar Messages

Where to find - information on adjava utility

Where I can find any information on adjava utility

We are just starting on XML Publisher in 11i10.2. We will need to automate the migration of saving templates into the apps through scripting so that new development can be migrated up our test environments and into production without human intervention.
Thank you.

HT4199 Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi, how do I manage storage? Disk Utility says "other" is taking up most of my storage but I don't know where to find "other". Please help!

Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Would anyone know where I can get or find the Apple Loops Utility??

Would anyone know where I can get or find the Apple Loops Utility??
I heard I can use the utlility with GB. Need to speed up some vocals/timestretch and someone said this program could work?
Any Oponions?
thanks, technoreid

you can also find it in your "ulitilty" folder located in the Applications folder.
I assume you have Logic installed or you'd be posting in the GB forum.

I have LR5. On the left column Catalog/ All photographs I have 11557 photos but on the strip under says: All photographs 9492 of 11557 photos. Where I can find those missing 2065 photos?

On my Lr5, on lefhand panel stays: All photographs 11557. On the lower strip stays:All Photographs 9492 of 11557 photos. Where can I find those missing 2065 photos?

You have 2065 photos that are in stacks that have been collapsed, meaning that those pictures are not currently visible in 'All Photographs'.
You could use 'stacking>expand all stacks' to open them all if you wanted them to be visible.
M

Where to find drivers for hp 15 r022tx? i installed windows 7(64 bit) os.

Please help me where to find drivers for hp15r022tx model. I am unable to use my machine. I will be using windows 7 (64 bit) on this laptop.

Hi:
HP is aware of the drivers missing from the support pages issue and is working on resolving it.
It is affecting hundreds of notebook models.
Since I don't work for HP, I do not know when the sites will be operational again.
With the Thanksgiving holiday in the United States, that has delayed things, I'm sure.
We are on the fifth day of this problem.

Where are the many missing features in Numbers found?

The more that I use Numbers the less likely that I will ever go through the motions of trying to get Numbers to do enough of the things that have to be done in order for my income tax program to work. Like in another post I have some of my smaller tax forms to say that they are too big to be imported. There seems to be too many missing features to do a useful job.
This leaves trying to use Numbers to handle new small, small, small spreadsheets. At the present times I have little problem setting up a format for a cell providing the formatting is available. In Excel the easiest way to copy a format to a new cell is to use format painter. Many time copy/paste will work. But copy/paste will move the formula also. I have not been able to find a way to do this with Numbers.
So far the sliders feature is the one feature that interests me enough to try to use Numbers in the real work handling portion of my business. Many things I want to do either I can't find out how to do them or there are too many added keystrokes needed compared to Excel to make me want to do a spreadsheet in Numbers.
Since the majority of my spreadsheets do not use a header row or header column I have to get that turned off. Tax sheets have a lot of blank spaces to start things out & normally will be different than the next sheet.
I used a lot of cell/range names as well as individual cells. I use 450+ cell names in my main Form 1040, A,B,D,NE,IA page. That still leaves me needing to know the row/column designation most of the time. I cannot find where that information is displayed in Numbers.
I keep looking, but generally do not find the needed feature that I need. Many like the cell designation is so basic. Being able to use the arrow keys to move to a cell for inclusion in a formula is another one that I am unable to do. Using the help files do not come close to answering any question that I have with Numbers. Where is the Numbers, "Missing Manual?" I need what I don't have & may not be made at the current time.
Like Pages 1.0, Numbers 1.0 doesn’t seem ready for prime time use. There are too many missing features be a very complete spreadsheet. Some I probably can’t find, some probably are not there.
I need help.
Bill the TaxMan

HolgerA,
Page Headers and Footers are gone, but are returning, according to a recent KB article:
Exerpt...
Some features in upcoming releases in the next 6 months
Pages
Customize toolbar
Vertical ruler
Improved alignment guides
Improved object placement
Import of cells with images
Improved word counts
Keyboard shortcuts for styles
Manage pages and sections from the thumbnail view
Numbers
Customize toolbar
Improvements to zoom and window placement
Multi-column and range sort
Auto-complete text in cells
Page headers and footers
Improvements to AppleScript support
Keynote
Customize toolbar
Restoring old transitions and builds
Improvements to presenter display
Improvements to AppleScript support
In the meanwhile, you can continue to use these features by accessing the previous versions of the iWork applications which remain installed on your Mac. The previous versions can be found in Applications > iWork ’09.Reverting documents created in the new iWork for Mac applications to the previous version’s file formatNew or existing documents you open in the new versions of Pages, Numbers, and Keynote use the new unified file format. These files can’t be opened in the previous versions of the iWork applications. To revert the document file format to the previous version, you can do one of the following:
Documents that you haven't edited can be reverted to the iWork ’09 version by selecting File > Revert To.
If you have edited the document and want to preserve the edits, you can save it as an iWork ’09 document by selecting File > Export To, then choosing Pages ’09, Numbers ’09, or Keynote ’09.
Jerry

HT203167 I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

The iTunes application should be installed on the system drive. You may need to repair iTunes to fix that error regarding a missing .exe.
To organize your library properly see Make a split library portable.
If you don't have a working version of the library that can be transformed into a portable shape I have tools and techniques that can repair the broken links.
tt2

I transferred my music to a larger hard drive and when I went to sync to iTunes there half my library had a '!' next to the songs. After I located one song the question 'would you like itunes to find other missing files' came up. What does this mean?

I recently transferred my music from one external hard drive to another and when I went to sync it to iTunes half my music had a '!' symbol on the left side, which meant that the songs weren't located. When I went to locate one of the songs it asked me if I wanted iTunes to find other missing files, which I said yes. What happens next and what is iTunes doing to find the missing files?

iTunes is a database. When you import songs to the database, it records the location of that song, so that when you play, or sync the song iTunes knows where to look for it.
When you moved your music to a different location, iTunes can't find it because you didn't tell iTunes that you moved the music.
You'll have to re-add those songs that you moved to your itunes library. Your best bet is going to be to delete all the songs in your library and then go to File > Add folder to library > and then find your music folder on the new external hard drive.
Also, the external drive HAS to be connected in order for iTunes to find it.

Where to find the log file

Hi,
I am gettting the following runtime portal error and do not know where to find it.
I have searched in my c drive but nothing has been found.
Do you guys have any idea where i can locate this error log ??.
Runtime error portaal
Fout opgetreden bij verwerking opdracht voor :
iView : pcd:portal_content/com.getronicspinkroccade.GetronicsPinkRoccade/com.getronics.civision.CiVision/com.getronics.civision.civga.civga/com.getronics.civision.civga.iViews/com.getronics.ExampleOneIntl
Naam component : WorkShopInl.default
Error occurs during the rendering of jsp component.
Exception id: 10:28_12/10/05_0005_3628850
See the details for the exception ID in the log file

Log and trace messages are written in <installation_path>j2eeclusterserver0log<b>defaultTrace.trc</b>. But it's very hard to read this file's content with a text editor... So you should use the LogViewer utility. You can use either the standalone or the integrated LogViewer that you can find in <i>J2EE Visual Administrator -> Server XX -> Services -> LogViewer</i>. Have a look at this weblog for learning how to use it:
Netweaver Portal Log Configuration & Viewing (Part 2)
Davide

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive

Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
Name : Seagate Backup+ BL Media
          Type :           Disk
          Partition Map Scheme :           Master Boot Record
          Disk Identifier :           disk1
          Media Name :           Seagate Backup+ BL Media
          Media Type :           Generic
          Connection Bus :           USB
          USB Serial Number :           NA5B83S2
          Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
          Writable :           Yes
          Ejectable :           Yes
          Location :           External
          Total Capacity :           1 TB (10,00,20,48,85,504 Bytes)
          Disk Number :           1
          Partition Number :           0
          S.M.A.R.T. Status :           Not Supported

Seagate website.
Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive.

Where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable.

where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

"cannot find symbol : class Scanner" error message

I have an error message that says:
"cannot find symbol : class Scanner"
I tried typing at the top of the program
import java.util.Scanner;but I still have the same error message.
What should I do ?
Thank you in advance

http://java.sun.com/j2se/1.5.0/docs/api/java/util/Scanner.html
Since:
1.5
look at the javadoc, it says since 1.5 so it's not there in earlier versions.
just a guess

Kichat: Where to Find Links to Things About iChat (Replacement)

Original
kichat: Where to Find Links to Things About iChat
Where do I Find Links to Things About iChat ?
Useful Other Web Pages
On AIM
AIM 5.9 If you are using 10.4.8 or lower your PC buddy will need this version
Download Newest AIM site PC version of AIM 6.1.x.x Download site reportedly works with/to 10.4.9
Another site explaining how to set up the AIM application
AIM for Mac Doh?!?!? (Text Only)
On Internet Speed Checks
Thanks to Defcom on all of these. Now and then when starting out or encountering problems, it is worth checking if you have the Connection Speed you think you have (or indeed pay for). Most need you to have JAVA installed and active. Most of the common Browers will have the required Pug-inactive.
Check Your Broadband speed DSLreports. Speed check with a Javascript enabled site
ADSLGuide's Speed Test Another Java based Test site in Britian.
Speed Test at Audit My PC As the Link says
SpeedTest.net A test site just for Testing. Nice Graphical interface (bit "blokey" Men will like it). Shows a section of the world with the most local servers. You can choose ones from further afield
BroadbandMaX.co.uk As it says Another British based single server test site. Uses javasript and Flash rather Java to run test. Has speedometer style graphics.
On ADD-ONS
iChat ADD-ONs
OK. iChat may not do all the things you may come across when trying out different IM applications.
iChat 2 stuff first
iCAR Away Message maker. BEWARE CONFILCTS WITH iCHAT 3
iProfile 1.2: Add an AIM profile. Beware of using with Tiger/iChat 3
"iTunes Calling.." Doug Adams' Utility for showing what your iTunes is playing as a Status Message. Not needed for iChat 3
iChat Status A System Preference control item that can run several applescripts (included) from it's interface to put info from other applications in the Status message. Not siutable in it's current form for iChat 3
Edit Sept. 2006 And March 2007 No revision yet.
Live Icon Moving Buddy icon add on. It lives !! Was written by Ecamm but found on VersionTracker only. (Thanks Defcom !!) The VersionTraker page does say it is iChat 2.x Only !!
iChat 2 and 3 compatible stuff
Ecamm.com (iChatUSBCam) A utility for making G3/500 and slower work with USB cameras and external iSight cameras. Originally for iChat 2.x but the current version is Universal and works on Intels as well.
iChatUSBCam has been updated for the changes in 10.4.9
10.4.9 adds USB Video Class (UVC) drivers to the OS which work with iChat.
You may have to Update and delete the Drivers you have (IOXperts or Macam) the delete com.apple.ichat.plist as well to get your camera working again.
John Kennedy's Video Page All sorts of stuff. Camera driver links, other products - basically an eclectic look.
iGlasses Enhancement for Picture control for External cameras.
iChat Streaming Icon Another moving icon Utility. Seems to be OK in iChat 3.x
iChatter More from Ecamm.com Speaks iChat Text chats.
Conference Recorder Yet more from Ecamm. Allows you to record iChat Video chats.
Not tried in iChat 2 or is iChat 3 specific
Showmacster Adds the ability to show Video clips, icons, pics as slide shows and more.
ChatFX Adds the ability to live feed of Photobooth type distortions and more. Was originally Intel Macs only but NOW Universal!! Can be power hungry as Video is effectively processed twice.
Chax An Add-on that does much. Allows Auto Accept of Files and Text chats. Tabs Text chats into one window. Has many items that add to the iChat Menus and a set of Preferences added to the iChat Prefernces window.
PowerBoost More from Ecamm. This time a Utilty for slower Macs to be able to Multi-Video chat.
On Other Applications
Multi-service (AIM, Jabber, MSN, Yahoo! etc.) Text Only apps.
ProteusX A Mac based multiple service Text Chat Instant Messenger client.
Edit: March 2007. Web site has not been online for several months now.
Fire Another Multi-service Text only Client for Macs.
Adium X Another text based multi- service client.
Mac based AIM Client(s)
AIM for Mac The Mac Version of AIM.
Alternatives to iChat but Video chatting capable apps
iVisit A Mac and PC alternative. (does not use AIM or MSN or Jabber)
Yak For Free Like Skype and iVisit is a Cross Platform Video, Audio and IM application. They beat Skype to a Mac version.
Skype Cross Platform IP telephony and Chat client. Now has a Mac version for Video chat
PalTalk.com
Yahoo! Messenger for Mac Beta of Yahoo! 3
Gizmo Says it can link to almost anything. Frre to Download. Looks like calls to lanlines cost like Skype does.
Apps for PCs in addition to lose listed above
Trillian PC based alternative to AIM using the AIM servers. Will connect to iChat
Apps to connect to other Services
Mercury Messenger A JAVA based MSN Client. JAVA makes it cross platform. Has a beta for Video and Auido chats.
aMSN Another MSN Video chat Client
<href="http://messenger.yahoo.com/">Yahoo! Messenger for Mac Beta of Yahoo! 3
On Other iChat Set Up and Info Pages
CherryPop Homepage Alternative pages about setting up iChat.
John Kennedy's Homepage Links to Camers Drivers and other useful stuff. A bit dated now
Ryan's iChat set up pages Well worth a beginners visit.
MVLDesign.com Mac to PC (AIM 5.9) and iChat help page.
Chatter Lists pages
This might be useful to those who ask it regularly.
If your looking for iChat Buddy Lists You may want to register at these.
MyiSight.com
iChatters.com
Globalchat chatfinder.com
.Mac Buddy Central (Thanks to Iveta Staks.)
iChat Club : (Thanks to Phillippe Alary)
iChatVillage
iChat Rooms Listing
Some of them cost. Also do a Google search for more, including the AIM chat rooms.
These require that you make note of the chatroom and enter it in the window that pops up when you use the "Go to Chat" item in the iChat File menu.
6:10 PM Friday; March 30, 2007

Original
kichat: Where to Find Links to Things About iChat
Where do I Find Links to Things About iChat ?
Useful Other Web Pages
On AIM
AIM 5.9 If you are using 10.4.8 or lower your PC buddy will need this version
Download Newest AIM site PC version of AIM 6.1.x.x Download site reportedly works with/to 10.4.9
Another site explaining how to set up the AIM application
AIM for Mac Doh?!?!? (Text Only)
On Internet Speed Checks
Thanks to Defcom on all of these. Now and then when starting out or encountering problems, it is worth checking if you have the Connection Speed you think you have (or indeed pay for). Most need you to have JAVA installed and active. Most of the common Browers will have the required Pug-inactive.
Check Your Broadband speed DSLreports. Speed check with a Javascript enabled site
ADSLGuide's Speed Test Another Java based Test site in Britian.
Speed Test at Audit My PC As the Link says
SpeedTest.net A test site just for Testing. Nice Graphical interface (bit "blokey" Men will like it). Shows a section of the world with the most local servers. You can choose ones from further afield
BroadbandMaX.co.uk As it says Another British based single server test site. Uses javasript and Flash rather Java to run test. Has speedometer style graphics.
On ADD-ONS
iChat ADD-ONs
OK. iChat may not do all the things you may come across when trying out different IM applications.
iChat 2 stuff first
iCAR Away Message maker. BEWARE CONFILCTS WITH iCHAT 3
iProfile 1.2: Add an AIM profile. Beware of using with Tiger/iChat 3
"iTunes Calling.." Doug Adams' Utility for showing what your iTunes is playing as a Status Message. Not needed for iChat 3
iChat Status A System Preference control item that can run several applescripts (included) from it's interface to put info from other applications in the Status message. Not siutable in it's current form for iChat 3
Edit Sept. 2006 And March 2007 No revision yet.
Live Icon Moving Buddy icon add on. It lives !! Was written by Ecamm but found on VersionTracker only. (Thanks Defcom !!) The VersionTraker page does say it is iChat 2.x Only !!
iChat 2 and 3 compatible stuff
Ecamm.com (iChatUSBCam) A utility for making G3/500 and slower work with USB cameras and external iSight cameras. Originally for iChat 2.x but the current version is Universal and works on Intels as well.
iChatUSBCam has been updated for the changes in 10.4.9
10.4.9 adds USB Video Class (UVC) drivers to the OS which work with iChat.
You may have to Update and delete the Drivers you have (IOXperts or Macam) the delete com.apple.ichat.plist as well to get your camera working again.
John Kennedy's Video Page All sorts of stuff. Camera driver links, other products - basically an eclectic look.
iGlasses Enhancement for Picture control for External cameras.
iChat Streaming Icon Another moving icon Utility. Seems to be OK in iChat 3.x
iChatter More from Ecamm.com Speaks iChat Text chats.
Conference Recorder Yet more from Ecamm. Allows you to record iChat Video chats.
Not tried in iChat 2 or is iChat 3 specific
Showmacster Adds the ability to show Video clips, icons, pics as slide shows and more.
ChatFX Adds the ability to live feed of Photobooth type distortions and more. Was originally Intel Macs only but NOW Universal!! Can be power hungry as Video is effectively processed twice.
Chax An Add-on that does much. Allows Auto Accept of Files and Text chats. Tabs Text chats into one window. Has many items that add to the iChat Menus and a set of Preferences added to the iChat Prefernces window.
PowerBoost More from Ecamm. This time a Utilty for slower Macs to be able to Multi-Video chat.
On Other Applications
Multi-service (AIM, Jabber, MSN, Yahoo! etc.) Text Only apps.
ProteusX A Mac based multiple service Text Chat Instant Messenger client.
Edit: March 2007. Web site has not been online for several months now.
Fire Another Multi-service Text only Client for Macs.
Adium X Another text based multi- service client.
Mac based AIM Client(s)
AIM for Mac The Mac Version of AIM.
Alternatives to iChat but Video chatting capable apps
iVisit A Mac and PC alternative. (does not use AIM or MSN or Jabber)
Yak For Free Like Skype and iVisit is a Cross Platform Video, Audio and IM application. They beat Skype to a Mac version.
Skype Cross Platform IP telephony and Chat client. Now has a Mac version for Video chat
PalTalk.com
Yahoo! Messenger for Mac Beta of Yahoo! 3
Gizmo Says it can link to almost anything. Frre to Download. Looks like calls to lanlines cost like Skype does.
Apps for PCs in addition to lose listed above
Trillian PC based alternative to AIM using the AIM servers. Will connect to iChat
Apps to connect to other Services
Mercury Messenger A JAVA based MSN Client. JAVA makes it cross platform. Has a beta for Video and Auido chats.
aMSN Another MSN Video chat Client
<href="http://messenger.yahoo.com/">Yahoo! Messenger for Mac Beta of Yahoo! 3
On Other iChat Set Up and Info Pages
CherryPop Homepage Alternative pages about setting up iChat.
John Kennedy's Homepage Links to Camers Drivers and other useful stuff. A bit dated now
Ryan's iChat set up pages Well worth a beginners visit.
MVLDesign.com Mac to PC (AIM 5.9) and iChat help page.
Chatter Lists pages
This might be useful to those who ask it regularly.
If your looking for iChat Buddy Lists You may want to register at these.
MyiSight.com
iChatters.com
Globalchat chatfinder.com
.Mac Buddy Central (Thanks to Iveta Staks.)
iChat Club : (Thanks to Phillippe Alary)
iChatVillage
iChat Rooms Listing
Some of them cost. Also do a Google search for more, including the AIM chat rooms.
These require that you make note of the chatroom and enter it in the window that pops up when you use the "Go to Chat" item in the iChat File menu.
3:01 PM Sunday; April 8, 2007

Where to find a missing Scanner Utility

Similar Messages

Maybe you are looking for