Where to find a tutorial for clusters and bundling by name?
I have a huge vi. I need data to flow from one multistep loop to another. I want to make it a subvi for another vi, but there are too many connections for it to be created.
The help error suggests i use some clusters.
I would like to view some basic examples and tutorials of bundling by name, etc.
However, I need to see the values in the cluster and sometimes edit them.
Any suggestions?
Thanks
Randall
It sounds to me as if you should look into Type Definitions (aka Typedefs) in LabVIEW, starting with the manual or the online help. When a typedef is passed into and out of a subVI and a new element is added to it, you don't need to make any changes to the subVI connections.
With regard to your question, though: yes, you can modify subVI connector blocks after they are initially created, but it becomes very painful if you have a lot of instances of the subVI, because you have to update a lot of wiring.
Good luck,
John
Similar Messages
-
Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, BrasilTukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/ -
Where can I find a tutorial for editing iMovie on iPhone 4S
Where can I find a tutorial for editing iMovie on iPhone 4s
http://support.apple.com/kb/ht4174
and:
http://www.apple.com/iphone/from-the-app-store/apps-by-apple/imovie.html -
Where can I find a tutorial for Dreamweaver CS6?
Where can I find a tutorial for Dreamweaver CS6?
First web site in DW CS6 - (5-part written tutorial with sample files)
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1_cs6.html
Nancy O. -
Where can i find the theory for session and call transaction method
hi
where can i find the theory for session and call transaction method
byecheck this link
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.planetsap.com/bdc_main_page.htm
lsmw, bapi, bdc- session, bdc-calltransaction
u can get it in help.sap.com also -
All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
GmanIn general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim -
PA-US Where to find the documentation for renumeration type?
Gurus,
Where to find the documentation for renumeration type details for IT0008 in SAP Library?
I tried in HR sections under ERP of SAP Library, but could not find the place.
Thanks,Revathi,
I see an option to change the enum type in IT0008 maintenance screen.
Which simply changes section of the screen as "salary" to "pay scale" and vice versa.
I want to understand the difference between those in terms of payroll process (calculations).
Hence, I was trying to find documentation in this regard in SAP Library.
Thanks, -
Where i find the drivers for hp j5783 scaner
where i find the drivers for hp j5783 scaner
Hello ezraie, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking for the drivers. I would like to help.
I would recommend following this link to the HP Officejet J5783 All-in-One Printer Drivers.
Please let me know if you have any questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
HT5243 how do I find my password for adobe and Java
how do I find my password for adobe and Java
"Java" doesn't have a password, unless you mean your admin password for installing software. That's whatever password you (or the person who set your computer up) used to set up your admin account. That's the same password that you use when you start up the computer if you get asked for one. You cannot retrieve this password if you've forgotten it, but you can reset it and make a new one. See this support article if that's the case:
http://support.apple.com/kb/PH14325
"Adobe" is a company and likewise doesn't have a password. However, if you have Adobe cloud-based software you may well have set up a password with them. Adobe also require an account and password for downloading certain products. You'll need to contact Adobe to retrieve any such password if you've lost it.
Try
Adobe ID, sign-in, and account help -
Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
Name : Seagate Backup+ BL Media
Type : Disk
Partition Map Scheme : Master Boot Record
Disk Identifier : disk1
Media Name : Seagate Backup+ BL Media
Media Type : Generic
Connection Bus : USB
USB Serial Number : NA5B83S2
Device Tree : IODeviceTree:/PCI0@0/XHC1@14
Writable : Yes
Ejectable : Yes
Location : External
Total Capacity : 1 TB (10,00,20,48,85,504 Bytes)
Disk Number : 1
Partition Number : 0
S.M.A.R.T. Status : Not SupportedSeagate website.
Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive. -
Flash tutorial for BPEL and ESB stuff
Hi
Thank you for reading my post
is there any flash tutorial for BPEL and ESB support of Jdeveloper ?
something step by step which helps me to learn these features of jdeveloper.
thanksThank you for the link, it was good.
I want to ask something that i found confiusing.
there are more than one BPEL designer (development environment) available from ORacle.
One is Eclipse based, one is Jdeveloper,...
i want to know, which one is mature?
thanks -
Does anyone know where to find printer profiles for Epson paper with MG6200 printer for use in LightRoom5?
Epsnm should provide recommended settings (I.e. Which Canon paper type to select). They may also have profiles on their site.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
Cannot find an overload for "PeopleManager" and the argument count: "1".
Every time getting following error
Cannot find an overload for “PeopleManager” and the argument count: “1”.
at following line
$people = New-Object Microsoft.SharePoint.Client.UserProfiles.PeopleManager($context)
I am referring userprofile dll from 16 hive...Hi,
Can you provide the complete script in use for a further research? It would make others easier to find out the root cause of this issue.
Here is a working demo which works in my environment, you can take it for a try:
#Specify tenant admin and URL
$User = "[email protected]"
#Configure Site URL and User
$SiteURL = "https://tenant.sharepoint.com/sites/mysite"
#Add references to SharePoint client assemblies and authenticate to Office 365 site - required for CSOM
Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.dll"
Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.Runtime.dll"
Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.UserProfiles.dll"
$Password = Read-Host -Prompt "Please enter your password" -AsSecureString
$Creds = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($User,$Password)
#Bind to Site Collection
$Context = New-Object Microsoft.SharePoint.Client.ClientContext($SiteURL)
$Context.Credentials = $Creds
#Identify users in the Site Collection
$Users = $Context.Web.SiteUsers
$Context.Load($Users)
$Context.ExecuteQuery()
#Create People Manager object to retrieve profile data
$PeopleManager = New-Object Microsoft.SharePoint.Client.UserProfiles.PeopleManager($Context)
Foreach ($User in $Users)
$UserProfile = $PeopleManager.GetPropertiesFor($User.LoginName)
$Context.Load($UserProfile)
$Context.ExecuteQuery()
If ($UserProfile.Email -ne $null)
Write-Host "User:" $User.LoginName -ForegroundColor Green
$UserProfile.UserProfileProperties
Write-Host ""
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I am looking to start learning Xcode from the ground up and happy to help myself using published tutorial.
At present the current Xcode in the App Store is V6.1.1
The current published I can find is for V5 at https://developer.apple.com/library/ios/referencelibrary/GettingStarted/RoadMapi OS/FirstTutorial.html#//apple_ref/doc/uid/TP40011343-CH3-SW1
I am seeking the tutorial for V6.1.1Hokanst
many thanks for your effort. The challenge I have is that the text and images in the online (PDF) tutorial to which I refer, does not reflect the screen images of the Xcode application.
cheers
Bill -
Where can I find a tutorial for the Canon Pixma MG6220
I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intimidating to use some of its features and have had no luck in finding a tutorial online-------can anyone help me?????
I dont know how I did it: I have found the manual, but it's extremely confusing. I am 70, not quite as old as the questioner. I find this manual has too much content and I cannot find what I need (like almost every web page!).
We just bought the pixma MG6220 and have installed the driver on both our computers, and it's supposed to work wirelessly, and it does. Mine is a macbook air and we had to use the external drive to do the installation.
But when it came to scanning photos in order to add them to the digital ones, the scanner could only find my husband's PC, not my macbook. I understand that you cannot simultaneously use both computers to scan. Do I have to switch off the other computer to use mine? Or do I have to attach the laptop with a wire to the printer. My laptop is near the new printer, but the husband's PC and modem are further away - but they work. I have spent several hours trying to solve this, which should have a very simple answer, but can find nothing. I didn't understand 99 per cent of the content of the manual, which is very disempowering. Could it not "hide" the more obscure content and make it accessible via specific links. I do not want to plug in the external drive every time I want to use the scanner or printer (I lose the mouse function).
I also find it hard to navigate these community pages! What is tagging?
Maybe you are looking for
-
Custom Report: Can you hyperlink to a task or requisition?
Custom Report: Can you hyperlink to a task or requisition? When defining, configuring a custom form based report, how do you hyperlink to the task item or requistion?
-
My iPod Touch connects with Wi-Fi at home but is no longer connecting with Wi-Fi at airports or hotels. Is there anything I can do?
-
Hi friends, this is shyam can you tell me what is the relevance of vendor tab in customer master and which scenario you use this regards shyam
-
Installing Leopard freezes during installation..
hi. im updating my old tiger powermac to leopard and its freezing during installation.. i cant take the disc out and try the original discs as it seems like it needs the disc to boot from. ive held down the space bar but it doesnt eject. any ideas? t
-
R12 - Compile Invalid objects (Fast Formula, Package Body and View) Urgent
Invalid objects about 43, in this Fast Formula 2 AP Package object, and 1 view OWNER OBJECT_TYPE COUNT(*) APPS PACKAGE BODY 37.00 APPS PROCEDURE 1.00 SCOTT PACKAGE BODY 1.00 APPS VIEW 1.00 APPS FUNCTION