Where to find edited photos using the built in photo editor?

So, I just upgraded my i4 to an i4S. I didn't get a chance to play around with the photo editing features of iOS5 on my i4, but I have found them REALLY useful now. I have edited a few photos on my i4S and hit the yellow "save" button. In the camera roll they show up just how I edited them, but when I open the same photo in another photo app or download it to my PC it shows up as the unedited original. Any idea as to what's up with this?

I think it depends on how you share it. Sometimes when I email it to myself it retains the edits, but I read that when people sync their phone it sometimes does not.

Similar Messages

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

What is an smpt password? I have problems sending photos using the stamp at the bottom because it asks for some smpt password and I have no clue to find out what it is, how to set one of find one if I somehow put one in and don't know what it it.

what is an smpt password? I have problems sending photos using the stamp at the bottom because it asks for some smpt password and I have no clue to find out what it is, how to set one of find one if I somehow put one in and don't know what it it.

It's the password for your outgoing mail in your Mail account. You need to set it up in your Preferences.
Regards
TD

I can not find how to use the basic Mac air keyboard. where do i find it or do a tutorial board

I am new to the Mac worls and hardly used a PC . I used a Blackberry. How can i find how to use the macair key board. I can not get the plus sign or the brackets on my leyboard to work. The option key is called the atl key.. There is no easy guide for how to use all the Buttons on the Key board. where do i find them

Hello Sanjit_Das:
sorry for my english again !.
My purpose is almost the same as this:
https://forums.adobe.com/message/6137964#6137964#6137964
But I do not know which path must specify when the video is uploaded to assets:
Sorry to ask something so absurd.
I tried putting all
<source src = "assets / Myvideo.mp4" />
not working
<source src = "C: \ Users \ Angel \ Downloads \ NEW \ pruebamusevideo \ assets/Myvideo.mp4">
not work.
etc
Presenting want to work from any computer, DVD, memory stick ...
I'm going crazy.
I know it's something about the route.
From muse Vimeo links to work, but when I export them to HTML not working. I guess it's a problem related to the same.
Thank you very much again.

How do I use the built-in camera or webcam?

I know this may sound very elementary but there was no documentation with my Mac when I bought it new (except a thin flimsy pamphlet with very baic stuff in it) and the help menu comes up with nothing at all when I search for web cam, webcam or isight.
Where do I go to learn about how to use the built-in camera/web cam as a camera and also as a web cam?
Thank you

VortexBoy wrote: ... I know this may sound very elementary but there was no documentation with my Mac when I bought it new (except a thin flimsy pamphlet with very baic stuff in it)...
There should have been a seventy page booklet in the box with your new iMac. If yours is the latest version, clicking here will download it if you cannot find the physical copy. If yours is an older iMac model, you can search for the correct manual from the iNtel iMac Support Page > "Manuals" link.
After that, Mac 101 is a great web-based information source. If you don't need general help, take a look here for specifics about each application of interest.
VortexBoy wrote: ... and the help menu comes up with nothing at all when I search for web cam, webcam or isight....
If your posted info is correct that you are running Mac OS X (10.7.3), you should be able to get started by using your Mac's Finder > Help menu command. Searching for "camera" (without quotation marks) on my 10.7.3 Mac returns Mac's Help article entitled "Use your Mac’s built-in camera." This is the web version of the same help.
Other apps, like QuickTime Player (the Lion QT 10.x version), and iMovie (part of iLife that came with your Mac) can also use your iMac's camera.
iMovie Help or this web page version of the same help will explain how to "Record video directly into iMovie".
Use QTX Player's File > New Movie Recording menu command to record video with it. You can configure size and quality of the recorded material by using QTX's preferences as shown in this image:
VortexBoy wrote: ... Where do I go to learn about how to use the built-in camera/web cam as a camera and also as a web cam? ...
Different apps do not all work the same. For function-specific help, search Help in separate camera applications; i.e., after you launch Photo Booth, iChat, QTX, iChat, etc., use the individual app's Help menu command to search for more info on the camera or what you want to do.
This article offers great basic tips about how to position, light, and use built-in cameras. Although its subject shows it was written for iMacs, it is equally applicable to other reader's inbuilt Apple cameras, too.
For more specialized functions than those offered by the camera software already included with your Mac, you can search the Mac App Store for other apps that can use your camera.
For webcam help with iChat, use Apple's iChat Support page if you need more help that that provided in the dialog boxes and iChat > Help on your Mac.
To use your camera with FaceTime, search your Mac's FaceTime > Help or these web versions of the same Help topics that should be available on your Mac.
Skype or other third party webcam apps will offer their own Help menus of varying quality. In additon to these app Help services, some apps offer comprehensive Support services via their web page. If you decide to add Skype to your Mac, you can click here to review the excellent Skype Support pages.
If you need to start a new topic for specific questions after you get started, give as much detail about what you want to do and what you may have already tried unsuccessfully. We will offer specific suggestions based on the details you provide.
Enjoy your new Mac!
EZ Jim
Message was edited by: EZ Jim
Mac OSX 10.7.3

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

Video recording using the built in iSight camera on a MacBook Pro

Hello,
Where do I find directions to record video using the built in iSight camera on a MacBook Pro?
Thank you,
Deb

Hi macosxlover,
Those are the instructions.
Open iMovie
Move the slider to the camera (use it as a drop down if more than one cam is available)
Press the record button to add the video feed as a clip.
Edit as required.
12:00 AM Monday; June 12, 2006

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

Z10 - How to make the built in Photo app see photos on the SD Ram

Hi,
Was using my Z10 for recording video when it reported memory problems.. No problem. I baught it a 64 GIG SD ram to address any memory problems.. Perfect, all photos and videos now go to the SD ram.. BUT.....
Neither the photos nor the videos appear in the lists of content in either the built in Photo application nor the Videos application. To see them I have to go to File Manager and view files stored on the SD ram were they have been recorded as expected and can be seen. Often when you go to see a video or picture in the File Manager to view a photo or video, no thumbnail of the photo is present! instead you get a generic icon that the file is a photo and you have to open it to see what photo or video it is. It isn't until some time after the thumbnails are properly updated. It also puts both photos and videos in the Camera folder on the SD ram instead of the associated folders on the SD.
I was at the telus store while 2 telus reps struggling to find any way to get the photo app or the video app to display the SD ram content. They commented that Blackberry indicates it supports up to 32gig in SD ram but the fact that it is recording and retrieving properly indicates 64 gigs works too at least for this purpose.
The Question: How does one tell the Photo and Video app to display camera data on the SD ram?
Thanks,
The Manx

I've had issues with the 64gb cards also, one worked and another did exactly as you described.
Some users have had to format the 64gb card to FAT32 to make it work.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there a way to use the built-in Datalogging and programmatically log the front panel while the vi is running?

I would like to use the built-in Data Logging feature. There is the "Log at Completion" option, but is there a way to programmatically make a new log record while running? I looked around in VI server and couldn't find any methods that would do that. Currently, I am grabbing all of the front panel control references using VI Server and if there are any changes, the changed values are written to a log file along with a date/time stamp. I'm mostly dealing with buttons, which simply change from 0 to 1 or 1 to 0, so it's not too hard to visualize what was pressed. It works okay for reconstructing what happened, but it would be much nicer to use the built-in fe
ature because you can "replay" directly onto the front panel and actually see what the changes were. However, without being able to programmatically make a new log, it won't work for me.

Jake,
There are several options here.
I would suggest using your own code for datalogging. The datalogging you are referring to is primarily for debug, and one shot datalogs of front panel indicators (and controls?), not including graphs, etc.
If you go to the file functions, you will see a menu for datalogging. These functions will allow you to save your data, as you need it, simply, and in a compact format.
I recommend opening the datalog file, doing all your file operations, and closing the file before the program is complete. There are several examples of this in the examples database.
Good luck

Is it possible to use the built-in speakers when headphone connected?

I have a mini amp and speakers connected via the headphone jack on my late 2009 21.5" iMac.
First, is this the proper way to make this connection?
If I want to switch to use the built-in speakers, I can do so by unplugging the external amp. However, it seems that there should be a way to do this via software. But, I can't find it. Is it possible? If so, how?
I don't always want to make use of the external amp, I want to use it for music and videos, but not otherwise. And, I don't want to have to unplug it when it's not in use.
Thanks.

System prefs> sound> output.
select your internal speakers in there.
No need to unplug your mini amp.
This actually works on your Mac? I doubt it. This does not work on either the Early '06 iMac, nor the Early '09 Mac mini in my house. When anything analog is plugged into the audio-out port, the name of the device in Sys Prefs/Sound/Output simply changes from Internal Speakers to Headphones, there is no option for one or the other.
This has been asked over and over here, and I know of no way to do what the OP has asked.
Dah•veed

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

banannaphone,
Welcome to Apple Discussions.
Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

I have an ipad2 and downloaded photos using the adapter with an SD card. It created two albums.

I have an ipad 2 and recently imported photos using the adaptor and SD card. It created two albums. One called Last imported and one called All imported. Will it create two albums every time I import photos this way? If you delete from either album, it takes it out of the other. Seems it would take up double the space every time I import this way. I am new to this..

I don't believe it creates two separate albums, just two 'folders' to access the photos...and the next time you import photos, the 'last imported' should only reflect those newer photos.
It's my understanding that it does this just to make the newly imported easier to find rather than you having to scroll all the way to the bottom of your photos folder.
Think of it like the 'last documents' option in Word. A document will never live 'forever' in that category, it'll be replaced as soon as there are newer last documents.

Msiexec /qn fails when its not run using the built-in local administrator account

Hello all,
I am working on a project where I am trying to automate the deployment of VMs through a self-service portal.
Among other tasks such as clone VM, sysprep it, assign an IP, create AD computer object, join VM to domain and so on..., i need to install a few applications using msiexec, which is driving me crazy...
For this purpose, I am using a local user account part of the administrators group.
Please note, UAC is disabled on all the OS.
Basically, the msi installation works as expected on Windows 7 machines, however on Windows 8/2012, it fails due to lack of permissions. The curious thing is that if I use the built-in\administrator account instead for the deployment on those systems, the
application is installed correctly.
I have tested some things such as: DisableMSI (http://msdn.microsoft.com/en-us/library/aa368304%28v=vs.85%29.aspx), but although it progresses a bit further, it keeps failing.
Does anyone know what I can do to allow an user part of the administrators local group to be able to install using msiexec /qn?
Thanks in advance.

Hi,
Does it work if you use the account in local admin, and run the commands prompt as administrator to install the msi file? Please know that Only the built in administrator account has admin privilege by default. On other admin accounts you need
to run with elevated privilege (ie runas).
I would like to know if you use SCCM to perform your deployment with task sequence.
As I known, even if you disable UAC, the following policy is still enabled to detect application installation.
Computer configuration\Windows settings\Security Settings\Local
Policies\Security Options -> User Account Control: Detect application installations and prompt for elevation policy
Please disable this policy to see if your issue can be fixed.
Kate Li
TechNet Community Support

How to use the built in TV tuner in a GX 600???

Hi to everyone.
I would like to know how to use the built in tv tuner card in my gx 600.. I tried but it didnt detect any signal for tv..I wondering if I am doing something wrong. Your knowledge will be greatly appreciated.Thanks.
GX600 owner.

I am in Asia particularly in the Philippines Sir.
Yes I do see it in device manager labeled DVBT hybrid TV device. I think thats the tuner card right?
The program I am running to configure it is Windows Media Center, I am using a windows 7 OS..I connected the portable antenna and tried also a tv antenna but when it scans for signals it tells me it cant see any signal or channel at all.I am in a place where TV's connect to a channel even though your just using an aluminum tube..so signal is really good so I cant seem to figure out why it cant detect any..T_T.Thanks for your response sir..greatly appreciated.

Where to find edited photos using the built in photo editor?

Similar Messages

Maybe you are looking for