WHERE TO FIND Freight cost

Hi Gurus,
I am working on a report .
i need the information of freight cost. from where we can get the exact freight cost for item wise.
Becoz my client is very particular about the freight cost for each item in PO LEVEL and DELIVERY LEVEL and INVOICE LEVEL.
points will be awarded for sure.
REGARDS,
DULI.

Hi Friend,
Freight cost against condition type is store in KONP table, link is condition record no.
So, if it is purchase and frieght cost is maintained at item level, then you will get condition record number in EKPO table against each line item.
For same as delivery it will be in LIPS table.
Link these condtion record number and condition type with KONP table, you will get exact freight value.
Hope it will solve your problem.
Regards
Krishnendu

Similar Messages

Where do we find the costs in PPM after accounting integration ?

Hello everyone,
I've made the accounting integration based on roles via PS (I linked the project tasks and the WBS elements automatically and I made the customization in the accounting integration point of the "spro"). I have different cost/revenue rates but I don't know where I can find the costs we consolidated in PPM.
I tought that it was in the accounting integration tab, then costing and calculate but i have nothing and errors messages : "conflict of demand/effort task task 2 - phase 2 is over planning - no costing".
Does someone meet this issue ? Did I miss something ?
You will find screenshots attached.
Many thanks in advance for your help !
Cassoké

Hi,
Try planning properly. The phases and tasks therein.
Task timelines should be in Phase timeline.
Phase timelines should be in Project timeline.
Also check if you have Org unit based cost revenue rates, then make sure you give same in the project in cProjects.
If you dont hv cost revenue rates, provide cost revenue in different fields.
Let me know if it works.
Rgds,
Niranjan

Can some one explain me on Exchange server / CAL licesing & where I can find current cost information?

Can some one explain me on Exchange server / CAL licesing & where I can find current cost information?

Hi,
As far as I know, every user need a license to use Exchange server and we can choose User CAL or Device CAL.
For more information about license, you can refer to the following articles:
Licensing Basics: What are CALs (Client Access Licenses):
http://blogs.msdn.com/b/mssmallbiz/archive/2007/11/06/5942350.aspx
Exchange Server 2013 licensing:
http://office.microsoft.com/en-001/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
Exchange Licensing FAQ:
http://office.microsoft.com/en-001/exchange/microsoft-exchange-licensing-faq-email-for-business-FX103934581.aspx
For the cost issue, I recommend you call Microsoft Licensing for useful information. And they will be able to give you an estimate based on your requirement.
http://www.microsoft.com/licensing/
If you have any question, please feel free to let me know.
Best regards,
Angela Shi
TechNet Community Support

MIRO - Credit memo considering freight costs

Dear friends ,
We need to process a Goods Return to the vendor, but the goods has additional costs like Freight.
So we are doing the reversal process as follow:
MIRO - Credit memo
=> but when we process the credit memo the System brought together the freight costs.
we need to return but not remove the freight costs from the material cost.
MIGO movement 122.
=> here everything is ok.
Question:
How treat that situation where we need to keep the freight costs in the material account ?
Best regards,
Alessandro

hi
in that case, in miro header, there is a tab "details" here u have a option to enter unplanned dlvy cost.. u can enter ur unplanned dkvy cost.
ref the link
http://help.sap.com/saphelp_erp2004/helpdata/en/cb/370d3ae4533072e10000000a11402f/frameset.htm
Edited by: Jayakumar Raju A.S on Aug 17, 2009 3:00 PM

Freight Cost based on postal code from alternative partner (occasional)

Hi SAP experts!
In standard SAP, the freight cost is calculated based on the postal code from WE partner (goods receiver).
But my client have a situation where he uses an one-time customer as a goods receiver. In this cases the freight cost is being calculated wrong, because the SAP uses the tariff zone from goods receiver (WE partner).
Does anybody know if there is a standard partner function to be used in order to consider the zipcode from the one-time customer instead ?
Does anybody knows if there is a standard solution for this issue in SAP?
Exemple:
sold to party - client X - postal code NNN
ship to party - client X - postal code NNN
goods receiver - client Y - postal code AAA
Then the freight must be calculated based on the postal code AAA.
Thanks!
Edited by: Fesuster on Dec 10, 2009 6:10 PM
Edited by: Fesuster on Dec 10, 2009 6:13 PM

k

Inbound Logistics: What are the best options to capture freight costs?

We attempted to implement a freight payables solution which was built on Inbound Deliveries> Inbound Shipments> Inbound Shipment Cost Documents. The PO line items were flagged with a conf.control key which made the above inbound documents relevant.
Very long story short, we had to remove this functionality because of two major issues:
1.     The Inbound Deliveries were created with incorrect quantities some of the time. When the Inbound Deliveries were created with incorrect quantity those errors caused major problems (e.g., over accrual of freight cost to the tune of several millions of dollars!!!).
2.     Also, when the Inbound Deliveries were created with incorrect quantity MRP went berserk (e.g., when the IB delivery has the wrong quantity that shows up in MD04 and the planners are left scratching their heads wondering why the supplier is shipping so much or so little).
I wonu2019t get into the details of how the Inbound Deliveries were being created but suffice to say they were manually entered by the supplier without the benefit of an EDI transaction- it was more of a manual entry- hence the data accuracy problem.
The point of this post is to gain feedback from other customers who have implemented an inbound freight payables solution with success & understand what processes were used to make your project successful.
For example, if I had a u201Cwish listu201D Iu2019d request the following:
1.     The IB delivery document type Iu2019d like to use should be non-MRP relevant. This will eliminate the confusion that occurred when planners run MD04 and see all of the shipment notifications. Also, if the MIGO_GR transaction is used to receive the POu2019s, they will see the quantities on the PO, not on the IB delivery. This would be good for us from a business continuity stand point. However, if the IB delivery is not MRP relevant, than your GR does not accrue the freight cost defined on the SCD which short circuits the entire point of having these documents.
u2022     Q: Have you had any success implementing an IB freight solution with minimum impact to planning / inventory / operations?
2.     As mentioned above, the data accuracy of the IB delivery was problematic. Because of this issue we have changed our thinking so that we would require a EDI ASN to be sent from our supplier to our SAP system. Using EDI we feel that greater accuracy would be obtained since the quantities defined would map to what is being picked or at least aligned with what we would expect to be invoiced for. The problem is we donu2019t know how EDI capable our suppliers are.
u2022     Q: Has anyone had success implementing this with your suppliers on a large scale?
3.     Are there other inbound freight payment solutions that Iu2019m not thinking about u2013 custom or other that you have implemented & can share some of the specifics about? Iu2019d enjoy hearing about them. Since we are re-thinking what we implemented Iu2019m open to any suggestions.
Thanks so much for your time!
Rich Wortmann

Chandra,
Thank you for your reply. I'm aware of the freight condition approach you suggest & the ability to define the carrier in the freight condition.
We explored this functionality in the past. The problem/limitations we've experienced were as follows:
1. Essentially you have to know your freight cost & the carrier by PO line item at the time the PO is created. Both of these variables we typically cannot predict in our environment.
2. We have a lot of situations where the PO is considered a u201Cblanketu201D where it will remain open for a month up to a year. Knowing the entire freight cost for these PO's once they are created is impossible to predict so to support the freight conditions we would have to change our business process which would be a big effort for our organization.
3. Our suppliers ship product based on multiple PO's / PO lines, again it is impossible to predict what the per unit freight cost would be at the time a PO is generated.
These factors are what led us to the IB delivery solution which handles each one of these scenarios quite well provided you have good data when the IB delivery is created.
Regarding your second post: Thanks! This information is helpful.
Sincerely,
Rich Wortmann

Freight Costing - Problem of G/L account with Cost Center

Dear Gurus,
In VI02, I have the following u201CAccount Assignmentu201D message of error:
u201CG/L account 60900000 cannot be used (please correct)u201D
u201CComparison of the field selection strings from the G/L account 60900000 and the account assignment category K reveals that there is an incompatible combination of field selections for the field selection group 'Earmarked Funds'.u201D
Questions:
Bearing in mind that I am in the Shipment Cost cockpit, I need to mention that the system directly allocated me the following Account Assignment Category: u201CKu201D for u201CCost Centeru201D.
1- I could there either way create another Account Assignment Category for Shipping instead of Cost Center
2- The system tells me about an incompatible combination of field selection, how can I change that field selection to make it compatible? There are so many possibilities that I get bogged down in choosing the right combination.
I have been to OME9 and OB14 to try to maintain fields, however those fields have different values or names.
My aim here is to coordinate a G/L account group with a Cost Center for Freight Costing
Can anyone help?
Thanks
Chris

Dear Zafar,
If you desire you maintain two different cost centers for the two company and you need to have both of them posted on the same G/L account and Cost element, I would advice you to:
- create a Z table where by controlling area you define where the specific cost center need to get posted
- include this validation check in the exit for validation for controlling
- include this validation check in the exit for validation for finance
- include this validation check also in the sales order user exit
Standard SAP seems do not have direct link between cost centers & cost elements. For this reason ideal solution is to generate a table where you may define you needed structure.
E.g.: some ideas on the table you may create
Controlling area
Cost element from
Cost element to
Cost center from
Cost center to
I hope this suggestion may answer to your need.
Regards,
Viviana A.

Full Freight Cost payment to Vendor irrespective of GRN Quantity.

Hi MM Gurus,
I have a requirement where our client have to pay to Vendor for Frieght Value in the first bill (Vendor send many bills based on the GRN quantities) only irrespective of the GRN Quantity.
E.g I have a PO of 100 Qty and the Frieght condition value as 100 INR. Now, We have done partial GRN of 10 Qty only so the INR 10 is inventorized on the material for freight cost during GRN. But we have to pay 100 INR (full amount of Freight Condition) to vendor during MIRO for partial bill of 10 quantities of which we have done GRN.
I have tried doing in MIRO by entering full value 100 INR and 100 Quantity in MIRO for freight Condition but due to tolerance defined in system the invoice goes for block for payment. Actually, the concerned user do not have authorization for the release of blocked invoices (MRBR) and we cannot change the tolerance also because it comes under Audit.
I was thinking whether we do have something in Condition type settings where we can pay full frient cost to vendor in the first bill only irrespective of the Partial GRN?
Please suggest me on this.
Regards,
Neeraj

Hi,
Create a freight vendor separately and assign that condition for th freight vendor in conditions of PO and for that freight vendor do not check the G/Rbased.
In this case after creation of PO you need to do MIRO woth planned delivery cost selection in that screen and then you get a pop up where in you can select your freight venodr and make invoice verifiation for that freignt vendor and later you can go with GR for as much ever quantity as you are in need.In this way it wont effect the freight price with respect to your inward quantity.
Thanks.

Loading freight cost to inventory at the time of GR

Dear All
When i am not using LE then i do have process where i will be having a condition type of freight at STO type , I shall do delivery(VL10D) against that PO number, PGI and at the time of GR at receiving plant that freight will get uploaded to material which is having price control " V ". Now as I am using LE my freight will be calculated at VI01(freight cost calculation) , there will not be any condition type of freight at PO level . Now I want that(VI01) freight to get uploaded on material .That means some how my VI01 document will be linked to PO and I guess this is possible by doing configuration at " Shipment Cost Item Categories " .Please provide me solution if this can be done or give me any other alternate . I am running late so please do help me.
Best Regards
Parveen Kr Thakur
9309460061

The issue is resoleved.
We can load freight cost using LE on inventory in inbound shipment as well as in STO.
Config steps are :
1. Settlement rel. = A relevant for settlement (delivery costs) in T_56
2. In pricing schema of PO : condition catagory shud be " delivery relevent "
3. check "accurals" check box and "copy shipment cost" check in condition type .
4. Make condition type manual at PO level .Important to note the value of this condition type at the time of PO creation should be blank.
5. After shipment cost calculation check the shipment status .it shud b " C ".
6. At MIGO check ur accounting doc
Best Regards
Parveen Kr Thakur

Add freight cost in a cross company code scenario using a costing sheet

Dear Forum,
I will like to add freight cost to a material using a costing sheet. The freight percentage is very easy to add and works fine when the cost is added in the company code costing. My problems start when I want to add the freight in the cross-company code costing. I want to setup a cross-company code costing where the freight cost is added to the material in the buying company code and not on the selling company code. The cross-company code costing is setup using special procurement costing keys.
In below costing (CK11N) the procurement costing key is not used.
From the itemization it is shown that purchase info.record 5300067643 is read and the price of 12,97 is determined. There is added 10% in freight coming from the costing sheet.
The freight is shown in the cost component structure as well.
The special procurement type is now changed from ‘20’ to ‘AT´ on the MRP2 screen in the material master. The procurement is now pointing to an internal plant called ‘DCN’.
The costing of material 105050 is now repeated. I get the expected result from changing the procurement key, as I can now see the material is sourced from plant ‘DCN’. DCN is sourcing the material from BJ07, but that is not relevant for the example.
If I now look at the itemization again on the costing in BGA1 I now see that the price is not coming from the info.record. It is the costing in DCN that is used.
I will still like to add the freight cost in BGA1.
How do I add freight cost in BGA1 when I at the same time want to have the costing to be taken from plant DCN?
Please let me know if you need additional information on the customizing setup of the system.
Best regards,
Kim Hjorth Poulsen

Hi Srinu,
Thank You for a prompt feedback.
I have tried to follow Your advise. The special procurement costing key is customized like below.
I have updated the special procurement costing key on the costing 1 view of the material master. When costing the material it is using the special procurement key. This can be seen from the qty. structure tab in CK11N.
It is also costing cross company as intended.
The itemization looks like below.
and the cost component structure looks like below.
Unfortunately the freight is not added in the costing in BGA1.
I noticed that when the costing is made without special procurement key the costing sheet used in the costing is for material components. If the costing is made with the special procurement keys the costing sheet used is for finished and semi-finished materials. The customizing in both of the costing sheets are the same, but only when costing is without the special procurement keys the freight is added.
So unfornutely Your suggestion did not solve the problem.
Best regards,
Kim

Freight Cost in Stock Transport Order

Hello:
We have requirement where we want to include freight charges into inventory valuation of material in receiving plant of stock transport order. Is it possible using shipment cost document of LE-TRA module?
If yes, How can I do it??
Also, I want have different pricing conditions like washing charge, Demurrage etc. These pricing conditions are included in pricing procedure. Can I post value of these conditions in different G/L accounts? If Yes then How??
Also I want to crate a multi dimensional freight rate condition using Distance, Weight. How can I do this?
I will really appreciate your response or any docs you have on this subject.

Hi dev,
We did something similar last week. To charge the freight cost to the receiving party we did a manual service entry sheet for that.
We created a separate Po with Transport vendor and the receiving plant and account type is Z shipment costing and service item description as intercompany freight.
You will specify the limit of the amount here, and specify the G/L account here. Now create the service entry sheet withthe freight amount and settle.
I think you can follow the similar thing with additional lines for your requirement for other charges.
Since we want let the receiving plant pay the freight we didn't create the shipment cost document of LE-TRA.
Let see if any other suggestions comes.
Regards,
ratna

Freight cost condition for the whole purchase order (Header relation)

Maybe you could help me out with the following difficulty regarding freight costs for the whole purchase orders from the mass maintenance transaction MEK1 for pricing conditions.
I try to have one freight condition for the whole purchase order.
For instance, I maintained in the transaction MEK1 for the condition FRA1 the key combination vendor and purchasing organization (table 44) and entered an absolute value of X EUR.
Unfortunately this condition will not pulled as header costs in the purchase order, because I would have had defined an access sequence in the condition type, but this is not allowed for header conditions in general.
Do you have any workaround to maintain an item condition, which works like a header condition, so that I am allowed to have an access sequence and be able to maintain MEK1?
Any comments and help are very welcome.
Many thanks in advance
Sabrina

Hi,
Fright and discount conditions are called supplement conditon type and they are always matained with main condition type.
Please check PB00 condition type in m/06 transaction. You will find pricing procedure assinged as RM0002 to PB00 condtion type.
So you can maintain fra1 and other supplement condtions in main condtion only in MEk1 trasnaction.
By selecting the line item and then shift + F7 you can maintain fright or discount condtions for PB00 condition types with out having access sequence for supplement condtion types.
Regards,
shailesh Mackwan

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

Kichat: Where to Find Links to Things About iChat (Replacement)

Original
kichat: Where to Find Links to Things About iChat
Where do I Find Links to Things About iChat ?
Useful Other Web Pages
On AIM
AIM 5.9 If you are using 10.4.8 or lower your PC buddy will need this version
Download Newest AIM site PC version of AIM 6.1.x.x Download site reportedly works with/to 10.4.9
Another site explaining how to set up the AIM application
AIM for Mac Doh?!?!? (Text Only)
On Internet Speed Checks
Thanks to Defcom on all of these. Now and then when starting out or encountering problems, it is worth checking if you have the Connection Speed you think you have (or indeed pay for). Most need you to have JAVA installed and active. Most of the common Browers will have the required Pug-inactive.
Check Your Broadband speed DSLreports. Speed check with a Javascript enabled site
ADSLGuide's Speed Test Another Java based Test site in Britian.
Speed Test at Audit My PC As the Link says
SpeedTest.net A test site just for Testing. Nice Graphical interface (bit "blokey" Men will like it). Shows a section of the world with the most local servers. You can choose ones from further afield
BroadbandMaX.co.uk As it says Another British based single server test site. Uses javasript and Flash rather Java to run test. Has speedometer style graphics.
On ADD-ONS
iChat ADD-ONs
OK. iChat may not do all the things you may come across when trying out different IM applications.
iChat 2 stuff first
iCAR Away Message maker. BEWARE CONFILCTS WITH iCHAT 3
iProfile 1.2: Add an AIM profile. Beware of using with Tiger/iChat 3
"iTunes Calling.." Doug Adams' Utility for showing what your iTunes is playing as a Status Message. Not needed for iChat 3
iChat Status A System Preference control item that can run several applescripts (included) from it's interface to put info from other applications in the Status message. Not siutable in it's current form for iChat 3
Edit Sept. 2006 And March 2007 No revision yet.
Live Icon Moving Buddy icon add on. It lives !! Was written by Ecamm but found on VersionTracker only. (Thanks Defcom !!) The VersionTraker page does say it is iChat 2.x Only !!
iChat 2 and 3 compatible stuff
Ecamm.com (iChatUSBCam) A utility for making G3/500 and slower work with USB cameras and external iSight cameras. Originally for iChat 2.x but the current version is Universal and works on Intels as well.
iChatUSBCam has been updated for the changes in 10.4.9
10.4.9 adds USB Video Class (UVC) drivers to the OS which work with iChat.
You may have to Update and delete the Drivers you have (IOXperts or Macam) the delete com.apple.ichat.plist as well to get your camera working again.
John Kennedy's Video Page All sorts of stuff. Camera driver links, other products - basically an eclectic look.
iGlasses Enhancement for Picture control for External cameras.
iChat Streaming Icon Another moving icon Utility. Seems to be OK in iChat 3.x
iChatter More from Ecamm.com Speaks iChat Text chats.
Conference Recorder Yet more from Ecamm. Allows you to record iChat Video chats.
Not tried in iChat 2 or is iChat 3 specific
Showmacster Adds the ability to show Video clips, icons, pics as slide shows and more.
ChatFX Adds the ability to live feed of Photobooth type distortions and more. Was originally Intel Macs only but NOW Universal!! Can be power hungry as Video is effectively processed twice.
Chax An Add-on that does much. Allows Auto Accept of Files and Text chats. Tabs Text chats into one window. Has many items that add to the iChat Menus and a set of Preferences added to the iChat Prefernces window.
PowerBoost More from Ecamm. This time a Utilty for slower Macs to be able to Multi-Video chat.
On Other Applications
Multi-service (AIM, Jabber, MSN, Yahoo! etc.) Text Only apps.
ProteusX A Mac based multiple service Text Chat Instant Messenger client.
Edit: March 2007. Web site has not been online for several months now.
Fire Another Multi-service Text only Client for Macs.
Adium X Another text based multi- service client.
Mac based AIM Client(s)
AIM for Mac The Mac Version of AIM.
Alternatives to iChat but Video chatting capable apps
iVisit A Mac and PC alternative. (does not use AIM or MSN or Jabber)
Yak For Free Like Skype and iVisit is a Cross Platform Video, Audio and IM application. They beat Skype to a Mac version.
Skype Cross Platform IP telephony and Chat client. Now has a Mac version for Video chat
PalTalk.com
Yahoo! Messenger for Mac Beta of Yahoo! 3
Gizmo Says it can link to almost anything. Frre to Download. Looks like calls to lanlines cost like Skype does.
Apps for PCs in addition to lose listed above
Trillian PC based alternative to AIM using the AIM servers. Will connect to iChat
Apps to connect to other Services
Mercury Messenger A JAVA based MSN Client. JAVA makes it cross platform. Has a beta for Video and Auido chats.
aMSN Another MSN Video chat Client
<href="http://messenger.yahoo.com/">Yahoo! Messenger for Mac Beta of Yahoo! 3
On Other iChat Set Up and Info Pages
CherryPop Homepage Alternative pages about setting up iChat.
John Kennedy's Homepage Links to Camers Drivers and other useful stuff. A bit dated now
Ryan's iChat set up pages Well worth a beginners visit.
MVLDesign.com Mac to PC (AIM 5.9) and iChat help page.
Chatter Lists pages
This might be useful to those who ask it regularly.
If your looking for iChat Buddy Lists You may want to register at these.
MyiSight.com
iChatters.com
Globalchat chatfinder.com
.Mac Buddy Central (Thanks to Iveta Staks.)
iChat Club : (Thanks to Phillippe Alary)
iChatVillage
iChat Rooms Listing
Some of them cost. Also do a Google search for more, including the AIM chat rooms.
These require that you make note of the chatroom and enter it in the window that pops up when you use the "Go to Chat" item in the iChat File menu.
6:10 PM Friday; March 30, 2007

Original
kichat: Where to Find Links to Things About iChat
Where do I Find Links to Things About iChat ?
Useful Other Web Pages
On AIM
AIM 5.9 If you are using 10.4.8 or lower your PC buddy will need this version
Download Newest AIM site PC version of AIM 6.1.x.x Download site reportedly works with/to 10.4.9
Another site explaining how to set up the AIM application
AIM for Mac Doh?!?!? (Text Only)
On Internet Speed Checks
Thanks to Defcom on all of these. Now and then when starting out or encountering problems, it is worth checking if you have the Connection Speed you think you have (or indeed pay for). Most need you to have JAVA installed and active. Most of the common Browers will have the required Pug-inactive.
Check Your Broadband speed DSLreports. Speed check with a Javascript enabled site
ADSLGuide's Speed Test Another Java based Test site in Britian.
Speed Test at Audit My PC As the Link says
SpeedTest.net A test site just for Testing. Nice Graphical interface (bit "blokey" Men will like it). Shows a section of the world with the most local servers. You can choose ones from further afield
BroadbandMaX.co.uk As it says Another British based single server test site. Uses javasript and Flash rather Java to run test. Has speedometer style graphics.
On ADD-ONS
iChat ADD-ONs
OK. iChat may not do all the things you may come across when trying out different IM applications.
iChat 2 stuff first
iCAR Away Message maker. BEWARE CONFILCTS WITH iCHAT 3
iProfile 1.2: Add an AIM profile. Beware of using with Tiger/iChat 3
"iTunes Calling.." Doug Adams' Utility for showing what your iTunes is playing as a Status Message. Not needed for iChat 3
iChat Status A System Preference control item that can run several applescripts (included) from it's interface to put info from other applications in the Status message. Not siutable in it's current form for iChat 3
Edit Sept. 2006 And March 2007 No revision yet.
Live Icon Moving Buddy icon add on. It lives !! Was written by Ecamm but found on VersionTracker only. (Thanks Defcom !!) The VersionTraker page does say it is iChat 2.x Only !!
iChat 2 and 3 compatible stuff
Ecamm.com (iChatUSBCam) A utility for making G3/500 and slower work with USB cameras and external iSight cameras. Originally for iChat 2.x but the current version is Universal and works on Intels as well.
iChatUSBCam has been updated for the changes in 10.4.9
10.4.9 adds USB Video Class (UVC) drivers to the OS which work with iChat.
You may have to Update and delete the Drivers you have (IOXperts or Macam) the delete com.apple.ichat.plist as well to get your camera working again.
John Kennedy's Video Page All sorts of stuff. Camera driver links, other products - basically an eclectic look.
iGlasses Enhancement for Picture control for External cameras.
iChat Streaming Icon Another moving icon Utility. Seems to be OK in iChat 3.x
iChatter More from Ecamm.com Speaks iChat Text chats.
Conference Recorder Yet more from Ecamm. Allows you to record iChat Video chats.
Not tried in iChat 2 or is iChat 3 specific
Showmacster Adds the ability to show Video clips, icons, pics as slide shows and more.
ChatFX Adds the ability to live feed of Photobooth type distortions and more. Was originally Intel Macs only but NOW Universal!! Can be power hungry as Video is effectively processed twice.
Chax An Add-on that does much. Allows Auto Accept of Files and Text chats. Tabs Text chats into one window. Has many items that add to the iChat Menus and a set of Preferences added to the iChat Prefernces window.
PowerBoost More from Ecamm. This time a Utilty for slower Macs to be able to Multi-Video chat.
On Other Applications
Multi-service (AIM, Jabber, MSN, Yahoo! etc.) Text Only apps.
ProteusX A Mac based multiple service Text Chat Instant Messenger client.
Edit: March 2007. Web site has not been online for several months now.
Fire Another Multi-service Text only Client for Macs.
Adium X Another text based multi- service client.
Mac based AIM Client(s)
AIM for Mac The Mac Version of AIM.
Alternatives to iChat but Video chatting capable apps
iVisit A Mac and PC alternative. (does not use AIM or MSN or Jabber)
Yak For Free Like Skype and iVisit is a Cross Platform Video, Audio and IM application. They beat Skype to a Mac version.
Skype Cross Platform IP telephony and Chat client. Now has a Mac version for Video chat
PalTalk.com
Yahoo! Messenger for Mac Beta of Yahoo! 3
Gizmo Says it can link to almost anything. Frre to Download. Looks like calls to lanlines cost like Skype does.
Apps for PCs in addition to lose listed above
Trillian PC based alternative to AIM using the AIM servers. Will connect to iChat
Apps to connect to other Services
Mercury Messenger A JAVA based MSN Client. JAVA makes it cross platform. Has a beta for Video and Auido chats.
aMSN Another MSN Video chat Client
<href="http://messenger.yahoo.com/">Yahoo! Messenger for Mac Beta of Yahoo! 3
On Other iChat Set Up and Info Pages
CherryPop Homepage Alternative pages about setting up iChat.
John Kennedy's Homepage Links to Camers Drivers and other useful stuff. A bit dated now
Ryan's iChat set up pages Well worth a beginners visit.
MVLDesign.com Mac to PC (AIM 5.9) and iChat help page.
Chatter Lists pages
This might be useful to those who ask it regularly.
If your looking for iChat Buddy Lists You may want to register at these.
MyiSight.com
iChatters.com
Globalchat chatfinder.com
.Mac Buddy Central (Thanks to Iveta Staks.)
iChat Club : (Thanks to Phillippe Alary)
iChatVillage
iChat Rooms Listing
Some of them cost. Also do a Google search for more, including the AIM chat rooms.
These require that you make note of the chatroom and enter it in the window that pops up when you use the "Go to Chat" item in the iChat File menu.
3:01 PM Sunday; April 8, 2007

Report on Shipment/Freight Costs

Dear Forum,
We are following the process whereby the Shipment/Freight costs are included in the POs as conditions. At the time of Goods Receipt, as per the standard procedure, the Shipment/Freight Costs are loaded on to the materal costs of the Inventories received. Now there is a requirement to monitor the Shipment/Freight Costs and a report is required to be generated which would give the material costs as well as the Shipment/Freight costs. How can we generate the same?
Your help would be highly appreciated.
Regards

>
raj n wrote:
> Dear Forum,
>
> We are following the process whereby the Shipment/Freight costs are included in the POs as conditions. At the time of Goods Receipt, as per the standard procedure, the Shipment/Freight Costs are loaded on to the materal costs of the Inventories received. Now there is a requirement to monitor the Shipment/Freight Costs and a report is required to be generated which would give the material costs as well as the Shipment/Freight costs. How can we generate the same?
>
> Your help would be highly appreciated.
>
> Regards
You can use MB51(Amount in LC,101 mvmt type) for material cost.
Find shipment / freight cost using FBL3N report for required g/l account.

WHERE TO FIND Freight cost

Similar Messages

Maybe you are looking for