Where to find M.A.T. in BIOS of a 875P Neo LSR?

Hi y'all!
Currently I'm using:
P4 3.0GHz 800MHz FSB
2*512MB Kingston HyperX PC3200 CL2
MSI 875P Neo LSR (BIOS v1.6)
I'm wondering where I can enable P.A.T. or MSI's M.A.T.?
After reading something about BIOS version 1.6 enabling M.A.T. , I flashed from 1.2 to 1.6.
But where can I find this new option in my BIOS??
Thank's :]
Best regards,
Arjan

Okay... Okay... This is generally for MSI, no reason to take offence.. anyone. Or maybe just the guy who never used computer(apparently) but designed BIOS for this board.
I Have NEO FISR2 motherboard, and the problems I have seem to be something like people here have.
PAT isn't enabled if you overclock. What ever you do, Ultra Turbo or turbo.. nothing helps. Is there a reson for this?
If I drop memory to 333 and raise FSB, should the numbers in BIOS at memory speed show what it actually is, never have done so... And if I raise FSB and memory speed is at 400MHz why isn't PAT enabled, memory isn't overclocked?
If I try to change manually setting for memory, like cas etc... Should it do something, or are these there just for fun, so you could IMAGINE the effects on your board.
Almost all memory related settings are in BIOS for some other reason than adjusting setting on this motherboard, they don't affect anything. At least not for me. Maybe I was wrong thinking this board could be user for overclocking, those volt settings propably are there for show too. Nothing to do with overclocking, because you will never get everything out from this board. At least not if BIOS is working like this.
I did simple test, raised volt for memory to 2.90. Whopee. Raised FSB to 230, and left the memory setting at 400MHz. Changed by hand Cas setting to more relaxed ones.
Quess, which changes of these actually did something? FSB and Volts. For some unbelievably stupid reason board changes automatically both CAS(VERY RELAXED) settings and memory setting. Try Sandra, see for yourself.
Please, let me know if I'm doing something wrong, this is new board and new BIOS, maybe I'm missing something...
OR this is the most lamest try I have ever seen to put out decent BIOS. Nothing makes sense, thank you very much for wasting hours and hours of my time while I was trying to figure out why everything didn't work like I expexted, after all, there where so many "pretty buttons to press" that did nothing.
ARGH! X(

Similar Messages

Overclocking an MSI 875P Neo-LSR Bios 2.2

Here is my configuration :
CPU : Intel Pentium IV 3.2C 800Mhz HT
RAM : 1Gb [2x256MB DDR-400 PC3200 Infineon] + [2x256MB DDR-400 PC3200 Kingston]
GC : Club 3D Radeon 9700
MB : MSI 875P Neo-LSR Bios 2.2
HDD : 120 Gb Maxtor 8Mb cache + 40 Gb Western Digital 2 Mb cache
CPU Fan : Zalman CNPS-7000AlCu
Yesterday i tried to use CoreCenter and went to 215MHz (3.6 Ghz i think) with no hitch.
Now my question is with this configuration what can i reach and what to use (CoreCenter or Bios) ?
And which OC for the memory ??
Tx

I think use bios is better because of more flexibility. You can go up to about 3.5GHz.
please read:
Overclocking Guide

I need bios 1.20 875p-Neo

Please can you send me by e-mil the bios version 1.20 of the msi board 875p-neo
[email protected]
Thanks a lot :( ;( ;( ;(

all versions of bios from 1.0 to 1.4 for 875p neo are still in MSI USA website http://www.msicomputer.com/support/bios_result.asp

Weird Floppy Settings in BIOS V1.6 875P NEO

I flashed successfully to the 1.6 BIOS, but my setting for the Boot up Floppy seek gives me obviously incorrect selections.
It should be "enabled" or "disabled" but it gives me these choices instead:
"8 Clocks" or "128 mb".
Anyone have the same settings issue?
Phil.

Yeah i had exactly the same (that option seems corrupted after every flash -ive tried 1.0>1.2 1.2>1.4 1.4>1.5 and 1.5>1.6)
But it will reset to the correct values of "Enabled and disabled" once youve saved your BIOS settings

875P Neo - LSR BIOS???

875 LSR ver board - bios download??????????????????????????

http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=434&kind=1

Request for future bios relese for 875P Neo

Please can we have a 1.775v core voltage option?

The Taiwan page is located at http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=434

I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
TheOne

You need a DATA service enabled by your carrier to be able to send e-mail via thier network. Do you have a data plan with your carrier ? If so - is it enabled ?
Can you access internet thru your network (not wifi) ?

Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?

Hi Experts,
do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
For example
Sales Register
Purchase Register
Journal Register
Sales Analysis - Crystal Report
Purchase Analysis - Crystal Report
Check Register - Crystal Report
Production register
Pending Sales Order
Outstanding Receivable
Outstanding Payable
BankBook
CashBook
General Ledger
BP Ledger (Customer / Supplier)
Trial Balance
Balance Sheet
Profit & Loss Statment
Cash Flow statment
Excise reports
   RG 23 A Part I
   RG 23 A Part II
   RG 23 C Part I
   RG 23 C Part II
   Daily Stock Account
   RG 1
   ER 1
   etc....
Documets Layout
   Incoming Payment
   Outgoing Payment
   Journal Entry
   Transaction Journal Report - Crystal Report
   Sales Quotation
   Sales Order
   Sales Delivery
   Sales Return
   Sales Invoice (A/R Invoice)
   Purchase Order
   Goods Receipt PO
   Purchase Goods Return
   Purchase Invoice (A/P Invoice)
Inventory Transfer
Inventory - Goods Receipt
Inventory - Goods Issue
Best Regards,
Samir Gandhi

Hi Neetu,
Do you wish that at all customer site all concern involved in implemtation do the same work ?
I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
Best Regards,
Samir Gandhi

I have set up a new itunes library and am trying to sync this with my iphone. My iphone is asking for an 'exchange' password. I don't know what this is or where to find it.

I am trying to sync my iphone with a new itunes library. The iphone is askin for an 'exchange' password. I don't know what this is or where to find it.

Sounds like you do have an Exchange account setup on your phone. Have a Gmail or Hotmail account? They can both be setup as Exchange accounts. Have a work email account?

Re-installed itunes; now how do I tell the program where to find music on my external?

I just uninstalled and reinstalled itunes. I keep my files on an external hard drive--but in 2 different folders on the same hard drive. Problems: 1. Itunes does not know where to find the files. I get a little exclamation point next to all the songs. 2. Only songs from one of the two locations show up at all.
Less important, though still of interest to me: Only some of my playlists are showing up as well. I think I had two different itunes library .xml files before. And it is looking at the older of the two. Is that possible?
Thanks

Try restarting AppleTV by unpowering as well as restarting computer/iTunes and router.
AC

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Where to find drivers for hp 15 r022tx? i installed windows 7(64 bit) os.

Please help me where to find drivers for hp15r022tx model. I am unable to use my machine. I will be using windows 7 (64 bit) on this laptop.

Hi:
HP is aware of the drivers missing from the support pages issue and is working on resolving it.
It is affecting hundreds of notebook models.
Since I don't work for HP, I do not know when the sites will be operational again.
With the Thanksgiving holiday in the United States, that has delayed things, I'm sure.
We are on the fifth day of this problem.

Hey guys, do you know where to find the Equalizer in the new updated iTunes?

Hey guys, do you know where to find the Equalizer in the new updated iTunes? THANKS

Hi
When I got this new PC I did a complete audit. I found that this was kenotify.exe at startup.
Different info I found on the internet say it is essential to the functioning of FN.
I also noticed that when I press the FN apuie it generates no code. I have a small java script code returns me all the keys pressed on the keyboard.
I am surprised that the FN will work for you while you do not have this executable.

Where to find M.A.T. in BIOS of a 875P Neo LSR?

Similar Messages

Maybe you are looking for