Where to find message port for ecc 6.0 ?

Hi experts
I am creating a tecnical system(ECC WEBAS) in pi. there we have option called message Port.
so my quesiton is how to find the message port for this ?

Hi Praveen
Normally 36xx is the message port for ECC6.0 where xx is the instance numr of sap system.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4e515a43-0e01-0010-2da1-9bcc452c280b

Similar Messages

  • Where to find Message Server port ?

    How can I find the message server port on my portal server installation ?
    - punam

    Hi Punam,
    There are various ways of finding this out. One way is that you check the following log file and you can see the message port for your system. As far as I remember default port is 3601 but anyway confirm it in this file
    parameter is ms port
    C:usrsap<SID><INSTANCEworkdev_* files for ex dev_jcontrol
    You can also find this from SAP MMC as welk. Check developer trace after right clicking on message server process.
    Also check out similar thread:
    How can i find SDM port , Message server port, Message server name?
    Regards,
    Piyush
    ps: please mark all useful answers.

  • Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive

    Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
    Name : Seagate Backup+ BL Media
              Type :           Disk
              Partition Map Scheme :           Master Boot Record
              Disk Identifier :           disk1
              Media Name :           Seagate Backup+ BL Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           NA5B83S2
              Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
              Writable :           Yes
              Ejectable :           Yes
              Location :           External
              Total Capacity :           1 TB (10,00,20,48,85,504 Bytes)
              Disk Number :           1
              Partition Number :           0
              S.M.A.R.T. Status :           Not Supported

    Seagate website.
    Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive.

  • PA-US  Where to find the documentation for renumeration type?

    Gurus,
    Where to find the documentation for renumeration type details for IT0008 in SAP Library?
    I tried in HR sections under ERP of SAP Library, but could not find the place.
    Thanks,

    Revathi,
    I see an option to change the enum type in IT0008 maintenance screen.
    Which simply changes section of the screen as "salary" to "pay scale" and vice versa.
    I want to understand the difference between those in terms of payroll process (calculations).
    Hence, I was trying to find documentation in this regard in SAP Library.
    Thanks,

  • Does anyone know where to find printer profiles for Epson paper with MG6200 printer using Lightroom?

    Does anyone know where to find printer profiles for Epson paper with MG6200 printer for use in LightRoom5?

    Epsnm should provide recommended settings (I.e. Which Canon paper type to select). They may also have profiles on their site.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Where i find the drivers for hp j5783 scaner

    where i find the drivers for hp j5783 scaner

    Hello ezraie, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are looking for the drivers.  I would like to help.
    I would recommend following this link to the HP Officejet J5783 All-in-One Printer Drivers.
    Please let me know if you have any questions.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Where to find default Port of message server ID

    Hi all:
          Would you please tell me where and how to find default Port of message server ID?
         Thank you very ,much!!!

    Try this out if it works for you.
    http://HostName:PortNo/sap/monitoring/SystemInfo
    http://HostName:PortNo/monitoring/SystemInfo
    Regards
    Praveen

  • Where can I find release notes for ECC EHP4 SPS 03

    SAP used to deliver release notes. I want to find release notes for EHP4 SP03 but can't locate documents with what each Stack delivers.
    Also same for java stacks? any idea where I can get this information?
    Thanks
    Wayland Yutani

    Hi,
    You can find all information related to EHP4 on http://service.sap.com/erp-ehp.
    Thanks
    Sunny

  • How to find COM port for a specific USB device

    I want to automatically find the COM port for a specific USB device. I use the VISA find resource function but I can't get the manufacturer's ID. VISA says the device doesn't have this information. The find resource function does narrow my search (and often finds the port depending on what other usb devices are connected). In the case where it finds multiple possible ports, can I safely send a message to each port to determine if it is the correct device? I know it will work for my purposes but I don't know if I am asking for trouble by sending messages to unidentified devices. Any thoughts on how I can identify my device port will be appreciated. Thank you - Dave F

    You can do it using WMI.  I have C# code I am supposed to convert into LabVIEW foing something similar to what you want to do.  In my case, I am testing a USB device and need to know which port on the hub is which COM port (the device creates a virtual COM port for communication).  Using WMI, you can find the hardware path to the device and know that COM10 is USB hub Port 1 for example.  Unfortunately, I cannot share the C# code.
    You can download the WMI Code Creator tool from Microsoft, which should help you tremendously find the proper method of getting your info.
    You basically want to look at all the W32_USB devices for the specific device you are looking for.  Once you have that, you can look for the COM Port associated with it.  I don't know when I will get to coding this up in LabVIEW, but will report back when I do, assuming you haven't found the solution by then.

  • Where to find the logs for cronacle queues

    hi i m using redwood explorer 7.0.3 . Someboday had hold the cronacle queues . it was giving the message queues held by operator . But we don't know who held the queues. Can anbody tell where we can find the logs for these queues i.e who made changes w.r.to Cronacle queues.
    Regards,

    Hi,
    Yes this can depend on your system configuration
    To view the current settings of all parameters, you can:
    Use the Redwood Explorer and navigate to Configuration > Environment > Schedulers > SCHEDULERNAME > Parameters..
    Use the SHOW PARAMETERS or SHOW ALL command in the Redwood Shell.
    Look in the Master agent trace file.
    also check the operator messages in cronacle.
    Regards

  • Where to find a driver for Belkin Bluetooth Adapter Dongle F8T017ng

    where does one find a driver for Belkin Bluetooth Adapter Dongle F8T017ng?

    From the manufacturer.
    Did you google?

  • Satellite A60-156: Where to find graphic driver for Vista

    I've recently upgraded my A60 with new dvd, memory and hard drive.
    Upgraded to Vista and all works perfect except i cannot find an upgrade for my display driver.
    Just shows as standard graphics adaptor and i cannot get any 3d functionality on it even for Vista Windows games or screensavers.
    Can anyone advise as to where I can get updated drivers for this function? Graphics card is ati radeon 7000igp.
    Thanks.

    What to say It seems Toshiba page doesnt provide any Vista drivers for this unit.
    So you could try to use an graphic driver from the 3rd party website like www.omegadrivers.net
    But note; these are not Toshiba drivers and therefore the drivers are not tested on the Toshiba notebooks. You can install it but only at your own risk.
    Best regards & good luck

  • Satellite P200 PSPBGU: Where to find ethernet drivers for windows xp

    Where can i find ethernet drivers for windows xp? I've tried a lot of drivers, but no one installed.
    Help plz
    P.S. Everest says that ethernet card is - realtek rtl8139/810x fast ethernet adapter

    > Hi
    >
    > Why you dont search simply for the Realtek RTL8101
    > Family PCI-E fast Ethernet NIC (NDIS 6.0)
    > Google for this Realtek Lan card and you will find
    > one.
    >
    > I have goggled and got some websites which provides
    > the LAN drivers!!!
    >
    > How did you try to install the LAN drivers??? You
    > should access the device manager and should choose
    > the unknown device from the network adapters
    i googled for it, i found some drivers, i tried to install the using device manager, but it didnt installed :(

  • Where to find the DTDs for 10.1.2.0.0

    Hi,
    where can I find the DTDs for the oc4j config files?
    In the default server.xml I found "http://xmlns.oracle.com/ias/dtds/application-server-9_04.dtd" but in the same xml file I found the following element which I cannont find in the 9_04.dtd.
    <j2ee-logging-config path="./j2ee-logging.xml" />
    Thanks for your help
    Günther

    Here's the j2ee-logging elements from the 10.1.2 DTD
    <!-- j2ee-logging config -->
    <!ELEMENT j2ee-logging-config (#PCDATA)>
    <!ATTLIST j2ee-logging-config path CDATA #IMPLIED
    <!ELEMENT application-server (library*, rmi-config?, sep-config?, jms-config?, javacache-config?, j2ee-logging-config?, principals?, log?, java-compiler?, transaction-config?, global-application, application*, global-web-app-config?, max-http-connections?, web-site*, global-thread-pool?, compiler?, metric-collector?, cluster? )>
    The j2ee-logging.xml file doesn't appear to have a DTD or XSD defined for it.
    cheers
    -steve-

  • Can some tell me where to find the documentation for Oracle forms 6i,11g

    Hi Everyone
    Can someone please tell me where to find the online documentation for Oracle Forms 11g and 6i .
    Thanks in advance
    Gautam

    Most of the design time documentation is included in the Design-time tools (Builders). Specifically in the Builder Online Help. This information is no longer available on a web site. As for Forms 6i, hardly any of that information is available on the Oracle site any longer. That version has been obsolete for several years. You can find some of the old deployment documentation for 6i (6.0.8):
    http://www.oracle.com/technetwork/developer-tools/forms/documentation/techlisting-084882.html

Maybe you are looking for