Where to find old backup files and how to use it to restore

Hi,
Need help. I did a OS update to iOS 6 today.
Before the update I did backup my phone on my PC.
But since that backup there was a new back up that created automatically when I connected my phone back to the PC. Now with some issues I want to rollback to previous backup. But this backup file is not visible in the restore from backup list. Is there anyway I can manually find this file and try to restore from it.
In the backup folder I can see a few files with previous backup time stamp but not sure how I can use these files and which file to use..
Pls help.. Thanks.

Open the Users folder on the internal drive, drag the migrated home folder to the desktop, and provide your administrator password.
(77054)

Similar Messages

Where to find old thread/post and closed the thread

where to find old thread/post and closed the thread
i try to search by email id, by userid but no results display at all only new post are shown

Hi,
where to find old thread/post and closed the thread
i try to search by email id, by userid but no results display at all only new post are shownMake sure that u have specified the Correct date range parameter as required.
Regards,
X A H E E R

How do I stop a copy of backup files? Time Machine filled my extern HD, I bought a 2TB, drag and drop the old backup files and now my iMac has been stuck in "preparing copy" mode all night.

My 235 MB external HD was full, I bought a new 2TB and dragged and dropped the old backup files to it. Now my iMac is frozen in "preparing copy" mode. How can I 'unfreeze' it? How should I move the backup files from one external HD to the other?

This has been answered here so may times (especially by pondini, e.g. in this thread Time Machine stuck in repeating "preparing files" cycle), so please search this forum the next time before asking such a question.

Where do i find temporary internet files and how do i delet them

where are temporary internet files stored and how do i delet them from the computer

See [[Clear Recent History]]
You can see information about Firefox's cache usage on the about:cache page (open that page via the location bar like a website).

My AOL account on Firefox got hacked and I lost all contacts and file folders. Is there anyway I can find a backup file and reload??

My AOL account is on Mozilla/firefox, I do not have a disk loaded version. Unfortunately, I stupidly gave a "AOL Support" service my password, they got into my account, sent emails to my contact list, and cleared out my contacts as well as my saved folders. I immediately changed my password, but still lost the files.
Is there a procedure I can use to recover those AOL files??

You should contact AOL directly. They probably make backups every so often. Might not be up-to-date, but it's a better bet than combing through old cache files on your PC.

How to create a flat files and how i used this

hi Guys and gals,
I am david. I want to know how to create a flat files. I don't know about it also. pls explain it and also pls help me to create a flat files. If u have any program for creating pls send me.
I want to know about retrive the datas from flat files and also insert a record into it.
pls guide me
i need this immediately
david

void newMethod() throws Exception {
     // Reading from a flat file
     String data;
     BufferedReader br = new BufferedReader(new FileReader("c:\filename1.txt"));
     while ((data = br.readLine()) != null) {
          System.out.println(data);
     // Writing to a flat file
     BufferedWriter bw = new BufferedWriter(new FileWriter("c:\filename2.txt"));
     bw.write("sample data");
     // After writing the data close the file
     bw.close();
}

Location of xdodelivery.cfg delivery Configuration file and how to use it

I am trying to use xdodelivery.cfg for setting various Server Properties and calling
this in my Delivery Wrapper Java Program.
First of all i am not able to find this file anywhere on Oracle Apps APPL_TOP,So i have created this xdodelivery.cfg file in $CUSTOM_TOP/resource directory.
Then in my Java Program I have set Java system property by calling java.lang.System.getProperties().put("XDO_TOP", "/path/to/xdotop") which points to Physical Directory of as CUSTOM_TOP as /u01/app/appltop/cust
Then i am Calling req.setServer("PRINTER_NAME") method in Java Wrapper Program to call PRINTER_NAME properties.
But i am not able to get any success in it. User Guide is mentioning following thing
"The location of the configuration file is
{XDO_TOP}/resource/xdodelivery.cfg
where {XDO_TOP} is a Java system property that points to the physical directory.
This system property can be set in two ways:
• Pass -DXDO_TOP=/path/to/xdotop to the Java startup parameter
• Use a Java API in your code, such as java.lang.System.getProperties().
put("XDO_TOP", "/path/to/xdotop")
The system property must be defined before constructing a DeliveryManager"
Please give me solution of how to go about it .I mean using xdodelivery.cfg file
Thanks
Darshan

Hi,
I am facing a similar issue while using the configuration file, can you please list out the steps for setting the XDO_TOP Java System property, I have tried setting a Run Time environment variable XDO_TOP to the path of the xdodelivery.cfg file in my qapache port, but the file is not getting picked up.
Any pointers would be appriciated,
Thanks,
Ankul
[email protected]

HOW TO READ FILE AND HOW TO USE IT IN PATTERN EX. READ_TEXT

I WANT TO USE A PROGRAM'S CONTENT ND I WANT TO PASS AS PARAMETER IN A PATTERN..HOW TO DO THT.PLZZ REPLY...
EX. I HAV CREATED A STANDARD TEXT ZCREATE_TEXT AND I WANT TO SEND THIS AS A PARAMETER TO READ_TEXT...HOW TO DO THIS..

Hi,
When you create a Std Text in SO10 and save, it is saved with 4 parameters
like TEXT NAME, LANGUAGE, TEXT OBJECT, TEXT ID. these are the four parameters by default will be created for any std text when you create a TEXT in SO10 or in any document.
You will know this 4 parameters from SO10 screen.
enter text, display.
from Menu -> GOTO -> HEADER, see them.
Next when you wants to fetch this text using READ_TEXT fun module
yopu have to pass this 4 parameters to that fun module.
see the doc
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
reward points
regards,
ANJI

Where to find names for buttons and toolbars for use in userChrome.css?

I'm trying to change the layout of the new beta 8 browser, I would like to put the tab bar up into the title bar. The only problem with this is that the Home button and the New Tab button then stop working. I know that the Home button is called "home-button" but I don't know what the new tab button is called. I was merely wondering if there was a way of finding this out at all and if so how I would go about it.
Thanks.

Yes, you need to inspect a Chrome window.
The DOM Inspector (DOMi) has a menu item (Search > Select Element By Click) and a button to "Find a node to inspect by clicking on it" (left icon on the toolbar).<br />
You first need to open the browser window in the DOMi (File > Inspect Chrome Document) and choose the first from the list or choose the window that you want to inspect if you ave opened more.<br />
Click the Find button and use the keyboard (Alt Tab) or the Task bar to go back to the browser window (do not click in the browser window).<br />
Click that element with the mouse and keep the button pressed until you see a red border to indicate the the DOMi has located that element in the DOM tree.<br />

Zip or Jar files and how to use them

Hi ,
I have this problem. I have some .class that must be
packaged some way to deploy in the application user's directory. At some point of the execution the application will ask to create some object define in one of that classes I mentioned. So how can I package those classes, in a jar file or in a zip file? And most important will it work out ?!.
Many thanks in advance.

Using JAR Files: The Basics

Are old backup files saved or deleted in iTunes

I had to restore my Iphone back to factory. The backup file I created was too big to restore and the Verizon tech (who I foolishly let take over my computer) backed up the empty phone over the old backup file. I found a program to restore the original backup data, but it's been overwritten by the recent backup. Does iTunes delete the the old backup files or store them in a different folder?

iTunes only keeps one normal backup, per iOS device. As you've found out, its an incremental backup in that data that has changed or deleted is added or removed from the backup. Unless you backup your computer, your data is gone.

I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup. I can not find this backup file to delete it and free up the space

When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup. I can not find this backup file to delete it and free up the space

OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.

Where do I find the Adobe pdf 9.0 printer description file and how do I install it?

Where do I find the Adobe pdf 9.0 printer description file and how do I install it? Operating system is Windows 7 and I have Adobe Creative Suite 5.5 installed. Adobe Acrobat X Pro just updated to version 10.1.8

Hi. Thanks for the replyl
I'm in prepress, working mainly with Quark XPress for advertising files and with Word, Photoshop, everything, for many years. My older computer is the workhorse with Quark 6.5 and CS4 and OSX 10.4.11. Everything is set up for me to produce PDF x1a files by printing .ps files from Quark and Word, and InDesign.
My newer computer, OSX 10.9.4, must now be used to a greater extent. So I have Quark 9 and 10 and now Creative Suite for the Cloud. But I don't have any Adobe PDF printer which I select when I print .ps files and place into my Distiller Watched Folder. I by pass selecting the Adobe PDF printer in Word and just print straight to .ps. The .ps file just sits in the Watched Folder and no longer flows into Distiller, processed and out. Is this the way of the future? I just want a smooth, fast flow for PDF's. I want them to be PDF x1a compliant for hi-quality printing.
Thought you might help to give me info as to how one uses Distiller (or not) with the new operating system and latest programs. Can't seem to find any info as of yet by searching the Adobe FAQ's and the Internet in general.
Thanks alot.
Larry Winer

Where to find old backup files and how to use it to restore

Similar Messages

Maybe you are looking for