Where to find or check DSN3@ATH and DSN3@SGN?

I have an auditor asking me questions about SDNSEXIT and whether it has been modified. They want me to prove that DSN3@ATH and DSN3@SGN have not changed. I have no idea even how to figure this out. I tried looking on the IBM site and they talk about SDSNLOAD and SDSNEXIT but it is very confusing. Any help would be appreciated.

Hi Tom,
i suppose you look for these 2 members:
BROWSE    DSNSYS.V9102A.SDSNSAMP********************************* Top of Data *************************
MODULE NAME = DSN3§ATH                                           *
DESCRIPTIVE                                                       *
NAME         = SAMPLE DB2 IDENTIFY AUTHORIZATION EXIT FOR         *
                 RACF ENVIRONMENT.                                  *
Top of Data *************************
MODULE NAME = DSN3§SGN                                           *
DESCRIPTIVE                                                       *
NAME         = SAMPLE DB2 SIGNON AUTHORIZATION EXIT FOR           *
                 RACF ENVIRONMENT.                                  *
(DSN3SATH)*                                                                     *
           Line 00000000 Col
         TITLE 'DSN3SATH - SAMPLE IDENTIFY AUTHORIZATION EXIT'
-START-OF-SPECIFICATIONS-*****************************************
BROWSE    DSNSYS.V9102A.SDSNSAMP(DSN3SSGN)           Line 00000000 Col
         TITLE 'DSN3SSGN - SAMPLE SIGNON AUTHORIZATION EXIT'
***-START-OF-SPECIFICATIONS-*****************************************
You have to search in the sdsnsamp which is produced by your db2 installation.
hth
Kay

Similar Messages

Where to find information on retail phones and plan charges?

Where is a link to information about the current policy about purchasing a retail phone, and if it can replace a current phone that is out of contract? Are old plans continued when purchasing a retail phone?

Hi ChuckieB. It's always exciting to start looking forward to a new phone. As SuzyQ had mentioned, you absolutely have the option to keep your save calling plan, even your same data plan, with a new phone. Take a look at #2 & #7 at http://bit.ly/RkwwJv. But as she also mentioned, the Share Everything can save money, depending on how much data you use. Since you mentioned you do have WiFi available, many customers who use WiFi at home or work find they're easily able to stay under 2GB of data usage and save money with our Share Everything plans. I'd like to encourage you to use our Wireless Account Analysis http://bit.ly/vnLjqO to see if there's a way for you and your family to save money too.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Oracle Install Base - Where to find Queries related to parties and Loaction

Hi All,
Did anybody looked in Installed Base module, from where the party and location addresses are coming.
for example, when we select a party name and select GO button in the create item instance page , we will get some list of parties to select. From there we will select one party name.
I want in which jsp or java file the Query is located to retrieve all the parties here.
If anybody worked on this previously please help me.
Thanks in advance,
Murali.

Try putting 'CSI_DEBUG=TRUE&' in the url....right after '.jsp?'
HTH

Where to find the 2750 extended battery and cover?

I have searched the internet and called Verizon with no luck.
Anyone know where to buy one that they have them in stock?

jmack02 wrote:
http://www.verizonwireless.com/b2c/store/accessory?action=refineByPhone&phoneId=5605
the website lists it as a buy online item... Hopefully you can still get it..
Hey thanks I just ordered it!!!!!
Eddie

Where to find the latest Service Packs and Patches

AccAD service packs can be downloaded from SAP Service Market Place (SMP), under 'Comprised Software Component Versions'
The process for downloading the package is described below:
1. Go to SAP Support Portal - [https://service.sap.com/swdc]
2. Under Find your Software, see the 2nd bullet titled A-Z Index, and click on the link to Support Packages and Patches
3. Click on the letter A
4. Click on ACCEL. AD FOR SAP NETWEAVER
5. Click on AAD 2.2 FOR SAP NETWEAVER
6. Click on Comprised Software Component Versions
7. Click on AAD APPL DELIVERY ENGINE 2.2
8. Click on the OS version that matches your AccAD landscape
9. Scroll down to the window and find the Downloads window.
10. Look for the latest version by scrolling down further (internal scrollbar) and pay attention to the Last Changed date column.
11. Click on the link to the TGZ package which will start the download
Zeev

Hi Stephan,
I wanted to add onto Zeev's precise answer.
First of all we appreciate your feedback, we will look into why the above mentioned links are not updated as expected.
Regretfully our SDN page is a bit outdated and we are in the midst of updating it.
Currently, AccAD 2.2 SP4 as available for download and has already been adopted by some of the main SAP customers and in addition by new customers.
The release notes indicating the differences can be found as part of the installations but I hope to provide the 2.2 SP4 notes later this week - in a formal SDN announcement.
Further more as for additional updates:
- AccAD 2.3 is currently undergoing validation phase and is expected to enter Ramp Up phase in October of 2011.
- AccAD 2.3 as with every version brings with it new capabilities and increased performance and quality as well as a more up-to-date PAM.
- We are currently in the planning phase of the next AccAD version to begin development very soon and would be very happy to hear the feedback that you or any other of our customer base may have. To do so, I encourage you to contact me directly - as i cannot post an email address here - my details can be found in my business card found in this forum.
- We will be attending and presenting at SAP TechEd Las Vegas and TechEd Sapphire Madrid - we would be happy to meet up in case you will be present.
All the Best,
Smadar
Edited by: Smadar Ludomirski on Sep 11, 2011 9:29 AM

Where to find the Siebel OLTP Database and OBAW database after downloading

Hi All,
I downloaded Oracle Apps 7.9.6.1 (424114 KB) and i'n not able to see the following
1. Prebuilt dashboards and reports
2. OLTP DB and DW DB
Do i need to download them seperately from somewhere.
Thanks in Advance.
Jaan

Hi All,
My objective is to query the transactional database and the Datawarehouse tables. Could some please help me in finding these tables in OBIEE Apps. I'm not able to update rows in repository as well.
Any help appreciated.
Thanks
Jaan

Where to find laf.jar (Forms look and feel project)

Hello Francois,
I´ve just downloaded the latest .zip-file (1343) but it seems to be corrupt. So I downloaded LAF_1342.zip which works fine. But where is the so often mentioned laf.jar ? The zip file contains laf_902.jar, laf_1012.jar and laf_10123.jar. Is there some renaming needed ? Let´s say renaming laf_1012.jar to laf.jar ?
When I run css_updater.fmb it fails with POST-QUERY-TRIGGER error ORA-6508.
It looks like I' m not allowed to use the PKG_LOOK_AND_FEEL even though laf.pll is attached and the program units are within the form, too.
Could you please give a hint ?
Regards Frank

Frank,
The zip file contains laf_902.jar, laf_1012.jar and laf_10123.jar. The number corresponds to the version of Forms Builder. So if you are working with Forms Builder 10.1.2 rename laf_1012.jar to laf.jar.
Is the laf.pll available in your forms path (default.env). Default the laf.pll is in another folder when you unzip the laf_1342.zip.
Did you include the laf.jar in the archive of the config file (formsweb.cfg).
Regards,
Mark

Where to find how to use JSF and database operation(eg. JDBC) together?

Thanks very much!

Hi zhouen & Andrea,
Actually you should avoid using the SQL tags for antyhing but a trivial application.
I previously posted on this topic here;
http://forum.java.sun.com/thread.jsp?forum=427&thread=418247&message=1851795#1851795
and here;
http://forum.java.sun.com/thread.jsp?forum=427&thread=435179&message=1957499#1957499
And as Craig noted in his follow up to the first post it is very important to separate your business logic from the view.
Basically your application will be hard to maintain and extend if you embed access to the databse in your JSP's. For example, consider a search page. If you embeded the SQL into a JSP the app could be made to work, but consider a late breaking requirement 'we need to access the search functionality from a webservice'. How would you accomplish such an extension if the SQL was in the page. Hard to do at best.
TTFN,
-bd-

Where to find a tutorial for clusters and bundling by name?

I have a huge vi. I need data to flow from one multistep loop to another. I want to make it a subvi for another vi, but there are too many connections for it to be created.
The help error suggests i use some clusters.
I would like to view some basic examples and tutorials of bundling by name, etc.
However, I need to see the values in the cluster and sometimes edit them.
Any suggestions?
Thanks
Randall

It sounds to me as if you should look into Type Definitions (aka Typedefs) in LabVIEW, starting with the manual or the online help. When a typedef is passed into and out of a subVI and a new element is added to it, you don't need to make any changes to the subVI connections.
With regard to your question, though: yes, you can modify subVI connector blocks after they are initially created, but it becomes very painful if you have a lot of instances of the subVI, because you have to update a lot of wiring.
Good luck,
John

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

Firefox is freezing. When I close Firefox, and try to re-start it, it will not open. I need to access Task Manager, where I find Firefox still running. I close Firefox in Task Manager & can re-start Firefox.

Firefox is freezing in the middle of a browsing session. When I close Firefox, and try to re-start it, it will not open. I need to access Task Manager, where I find Firefox to still be running. Once I close Firefox in Task Manager, I can re-start Firefox. This can happen several times in the space of a few hours? I'm running Vista Home premium with Firefox 3.6.16, and this problem has only started in the last 4 weeks. Can Anyone Help? Core 2 Duo E7300 with 4GB RAM.

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: ***See: http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following:'''
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*Shockwave Flash 10.2 r152
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

WHERE TO FIND AND START HOMESHARING

WHERE TO FIND AND START HOMESHARING ...???

Hey catfed,
If you need help setting up Home Sharing, I'd check out the following article. It'll go over requirements to use Home Sharing and how to set it up in detail:
iTunes: Setting up Home Sharing on your computer
http://support.apple.com/kb/ht4620
Have a good one,
David

Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

Thanks for the reply however this does not help. When I check the cloud it shows that I have only 20 photos. In reality I had a lot more than that. All the photos on the cloud are those that I have taken since I was at the Apple store. When I check cloud storage usage on my phone it says that I have 5.1 GB of photos. This is a lot more than the 20 that I can see. I am not sure what the Apple employee did to my phone.
Still looking for answers. It is really too bad that I can not talk to an Apple person to get help since they messed up my phone.

HT2311 After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). What do I do?

After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). I also looked for the new iTunes by clicking on my Hard Drive icon but didn't see it there either. I only see the icon for the old iTunes. What do I do?

The exclamation mark means that the app has lost the link to the actual file.
First step: try and make sure the iPhoto Library is working correctly:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Where to find or check DSN3@ATH and DSN3@SGN?

Similar Messages

Maybe you are looking for