Where to find P&L details for selected company code

If F.01 transaction is transaction is executed it displays assets statement,liabilities statments,profit and loss statment,and etc . of which i need to have P&L A/C details .
Please give the information regarding where to get the P&L details and tables that hold this data.

report RFBILA00
using the following Tables:
TABLES: RFDT.
TABLES: T001, SKA1,
 T011, SKAT,
 T011T, SKB1,
 T009, T004,
 T009B,
 TGSB.
These are GL account tables :
SKA1,SKAT, SKB1
Hope thisll give you idea!!
Pl... award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Similar Messages

MIRO - deactivate direct posting to GL / material acct for selected company codes

Hi All,
I have a requirement to deactive direct posting to G/L and material accounts in MIRO, however, only for selected company codes (this cannot be done for all of them on client level in SPRO->Material Management->Logistic Invoice verification->Incoming Invoice -> Activate direct posting to GL/ Material accounts).
The thing is that for those company codes, MIRO posting has to be made always with Purchase Order Reference.
My idea is to build simple validation rule:
if company code is equal to (SET) and Purchase Order Reference is empty then error message should appear: "Posting without PO reference not allowed"
I was also thinking on creating own layout in MIRO and assign it to clerks which are responsible for posting in those company codes.
Can you advise on that, please?
Best regards,
Lukasz

Hi Tejas,
Thanks for your reply.
Answering your questions:
1. The thing is that these GLs are being posted with other transactions.
2. My concern is that after the document is parked and while editing user will delete PO reference, it can be any GL account picked in "GL tab" of MIRO transaction. My understanding is that I should put tick on "Post automatically only" on all the GL accounts which users are able to use (correctly or not) in that case.
My aim in this configuration is to restrict those posting in such way that users are not allowed to use them - and this is only in regards to MIRO transaction.

One vendor for two company codes

Hi Frds,
I have two company codes and i create a vendor which is applicable to both the company code.Is it required for me to create separate Payable reconciliation GL account for each company codes or creation of one common recco account is enuf.
Please elaborate on this as am new to this..
Thanks,
Rashmi Ravi

Dear all,
SAP allows You to create a customer / vendor master data that contains information that is valid for all the Company code --> into General data.
Then there is a part, Company Code data, where You can define specific details for each Company Code.
The transaction is the same FD01 or FK01.
I hope this helps You.
Mauri

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?

Hi Experts,
do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
For example
Sales Register
Purchase Register
Journal Register
Sales Analysis - Crystal Report
Purchase Analysis - Crystal Report
Check Register - Crystal Report
Production register
Pending Sales Order
Outstanding Receivable
Outstanding Payable
BankBook
CashBook
General Ledger
BP Ledger (Customer / Supplier)
Trial Balance
Balance Sheet
Profit & Loss Statment
Cash Flow statment
Excise reports
   RG 23 A Part I
   RG 23 A Part II
   RG 23 C Part I
   RG 23 C Part II
   Daily Stock Account
   RG 1
   ER 1
   etc....
Documets Layout
   Incoming Payment
   Outgoing Payment
   Journal Entry
   Transaction Journal Report - Crystal Report
   Sales Quotation
   Sales Order
   Sales Delivery
   Sales Return
   Sales Invoice (A/R Invoice)
   Purchase Order
   Goods Receipt PO
   Purchase Goods Return
   Purchase Invoice (A/P Invoice)
Inventory Transfer
Inventory - Goods Receipt
Inventory - Goods Issue
Best Regards,
Samir Gandhi

Hi Neetu,
Do you wish that at all customer site all concern involved in implemtation do the same work ?
I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
Best Regards,
Samir Gandhi

Where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable.

where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Where to find search history files for firefox

where to find search history files for firefox, I accidently deleted them. Have Time Capsule, but do not know where to look. Can't find anything but a folder called Mozilla. Thanks - Alan

Thanks. Guess i will have to download the driver package from Nvidia and extract the headers from that.

Where to find a power adapter for PB G3 Wallstreet?

Hi,
could you please give me an idea where to find a power adapter for my PB G3 Wallstreet?
Location: Bangkok, Thailand or Munich, Germany.
Thanks in advance!
Greetings
bierstein

eBay is probably your best bet.
http://www.ebay.com/sch/sis.html?_kw=Apple+Powerbook+G3+Pismo+Wallstreet+Lombard +yo-Yo+power+cord+adapter+Model+M7332

Can anyone tell me where to find an install guide for the Liveoffice app.

Can anyone tell me where to find an install guide for the Liveoffice app.
Thanks
Jeff

Hi Jeff,
You can download the install guide for Liveoffice application from the link provided below,
http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
Hope this helps you.
Regards,
Abhijeet T.

Where to find my Serial Number for Photoshop CS6 Extended? The program has been on my computer for at least a year now and for some reason it is now requiring my serial number to run the program. Please help!

Where to find my Serial Number for Photoshop CS6 Extended? The program has been on my computer for at least a year now and for some reason it is now requiring my serial number to run the program. Please help!

Log in into your Adobe account and go to "My Products". You'll find a list of all the products you've ever registered with Adobe.

Find active user exit for a transaction code

Hi All,
Please help to find the active user exit for a transaction code.
for Ex. below is the list of user exits for package VA ( for creation of sales order and changing sales order). Let me know which user exit is active and which is not active.
Exit name Short text
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Thanks & Regards,
Sabu

Goto TADIR table give program id as R3TR ,Objec type as CMOD and execute.
You will get all active exits in system.
Exits related to SD may be in ZSD package.

How to prevent WBS element for other Company code to be used in WO

Hi,
I am new to this forum and want to try this out.
This thread is regarding: Area: plant maintenance, create/change work order, message control in wbselement in tab "Addit data"
Detailed explanation:
In our SAP system we have the functionality that when a user enters a wbs element in a Work order (Addit.Data Tab) he gets an error message CJ065 if the WBS element is from another Controlling area.
We want in addition the functionality: show error message CJ 066 when the WBS element is for another Company code.
I have searched in message control within PM, but here is only allowed to enter messages for application area IW.
I have also tried to search for other message classes without finding where in customizing to maintain message class CJ.
Please help
Best Regards
Ellen

Thanks for your feedback Narendra,
I have thought of that solution (using customer exit at save), but hoping maybe there was a setting in Customicing eather in CO or in PM to make message CJ066 appear. When looking at the source code it looks tlike there is a setting in customizing to be triggered, but I cannot find out where..
BR
Ellen
Edited by: Ellen Ødegaard on Apr 29, 2008 2:08 PM

The tax code entered is not defined in the country for this company code

HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
    The tax code entered is not defined in the country for this
    company code.
System Response
Procedure
    Check and, if necessary, correct the entry.
Procedure for System Administration
    If it is not an input error, check and possibly change the
    system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure
        is assigned to the relevant country. the Procedure
        field is in the detail screen.
    2. Create a new tax code if required.
Thanks & Regards
Aarman

You can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA

Contract for multiple company codes

Hi,
The requirement is to process the Sales Contract for multiple company codes, the concern is
while creating the Contract document in VA41 we get the Sales area as mandatory.
How to achieve this? if we suppress or make it as optional with some kind of ABAP customisation (what it should it be? usereixt/VOFM routines or what?) would it solve the problem ? if yes ,what would be the impacts on the other transactions.
Kindly suggest.
Regards
SR

Hi
If it is a customer contract (SD contracts) then it is not possible to create the document without specifying the sales area. In the overview screen, even if the sales area is not specified, it takes the value from the 'Sold To' customer master record. If the SP exists in multiple sales areas, then the system displays the different sales areas in a popup and we have to select the appropriate one. To my knowledge, even if you manage to create the contract without those details, you cannot refer them for creating the release orders.
Thanks,
Ravi

Report painter report with diff. periods for different company codes

I need to create a report showing different period data for diff. company codes.
If company code = 1000, start date = 1, end date is user selected
If company code = 2000, start date = 6, end date is user selected.
Can this be done?
Thanks experts.

Hello
Can you please explain a little more in details. I know how to create a formula variable but am not sure how to frame the if statement. The company code is coming from the selection screen when the user runs the report. How do I put an If statement to say "If company code is XXXX, then start period is "06"?
Thanks for your help,

Where to find P&L details for selected company code

Similar Messages

Maybe you are looking for