Where to find the "Config tool"

Hi everybody,
because my collegue, responsible for the maintenance of the portal is out of office, I do need to check if the Debugging switch is still set to "on".
Can you tell me where I can find this Tool, and how to start?
Is there a remote Version for download?
Thanks
Erhan

Hi
On your machine there is 1 x 6-in1 Bridge Media Adapter (supports SD Card, SmartMedia, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card).
I think you must install Driver for this Adapter. Usually you can find all Drivers on your Tools und Utilities CD. If not you can find all supported Drivers on following link:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
If you have more problems let us know.

Similar Messages

Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom

Friends:
Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom? For example I would like to use the shadow, clarity, lens correction and such tools but cannot find them in Photoshop.
Thanks amigos
Migs

The obvious or not so obvious first. Depending on your knowledge. When you open a tiff, jpg, or camera' raw format they can be opened in Adobe Camera raw first which has identicle controls to lightroom's develop module.
Starting with I beleive CS5 maybe 4, some of the tools made their way into photoshop it self. Take a look at the camera lens filter, the Image>Adjustment menu or the adjustment layers which now support vibrance for example.

I could not find the "burn tool" in Photoshop 7, so I purchased Photoshop Elements 12, and I still cannot find the "burn tool". Where is it?

I could not find the "burn tool" in Photoshop 7, so I purchased Photoshop Elements 12, and I still cannot find the "burn tool".
Does the "burn tool" still exist? If so, where is it???
Thanks

Well, as I always say... If I want things done right, I have to do them myself.
I found the solution on the Internet... One must place your pointer on the icon that is presently showing and then press the letter "o" key to toggle between the Burn, Dodge, and Sponge tools.

Where can I find the Ellipse Tool in PE 12 in order to draw a circle ?

Where can I find the Ellipse Tool in PE 12 in order to draw a circle ?

ReaderTortune
Besides the article to which GautamBahl referred....
You may also want to review the following for working with the Titler's Shapes in Premiere Elements 12.
http://www.atr935.blogspot.com/2013/08/pe11-titler-shapes-for-highlighting.html
Thanks.
ATR

I can't find the line tool. Where is it?

I am new to Photoshop CS6. I was using CS2.
I can't seem to find the line tool. Can someone please tell me how to get the line tool?
Thanks,
Gary

Where do you find the wand tool in photoshop cc 2014

I working on a project and I can't find the Wand Tool in photoshop cc 2014. Can any one help me out here.

found it

Error starting the Config Tool with NW04s Sneak Preview

All...
I am running the Java NW04s Sneak Preview (SP9).
When I try to start the config tool, I get the following error on the dos session
<b>The system cannot find the path specified.
Program terminated abnormally
Press any key to continue...</b>
I realize that this is probably a very simple problem to fix... so can anyone tell me how?
Also... when I log on to the Visual Administrator or the NetWeaver Administrator, I cannot edit any parameters. I have tried logging in as "Administrator" and as "admin". Is the Sneak Preview locked out, or am I doing something wrong?
Regards

Srikishan --
I did check the bat file, and it says:
%JAVA_CMD% -Dsun.java2d.noddraw=true -Duser.language=en -classpath .\lib\launcher.jar;. com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.visual.ConfigTool ./lib/
where JAVA_CMD should equal %JAVA_HOME%\bin\java.
I have JAVA_HOME set in my environment variables.
I did a "set" command in DOS to check, and it is there.
The properties file in its entirety says:
#Generated by Config Tool
#Sat Nov 18 15:33:41 CST 2006
rdbms.maximum_connections=5
system.name=J2E
secstorefs.keyfile=
DALTFC-HEILEE
sapmnt
J2E
SYS
global
security
data
SecStore.key
secstorefs.secfile=
DALTFC-HEILEE
sapmnt
J2E
SYS
global
security
data
SecStore.properties
secstorefs.lib=
DALTFC-HEILEE
sapmnt
J2E
SYS
global
security
lib
rdbms.driverLocation=C\:
sapdb
programs
runtime
jar
sapdbc.jar
rdbms.connection=jdbc/pool/J2E
rdbms.initial_connections=1
Honestly, I can't tell you anything about this file.
The file C\:
sapdb
programs
runtime
jar
sapdbc.jar does exist.
Any other ideas?

Where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable.

where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Where to find a newsletter tool/app for a sharepoint online public site ?

where to find a newsletter tool/app for sharepoint online public site ?
can anybody tell me where/how to find a newsletter tool/app in the sharepoint online solution for sharepoint public site ?
Its for marketing, where visiter can add his/her mail for receiving marketing mail,
and he/her should have the possibility to stop membership af the newsletter group.

Hi,
There are several one over the store
go to the store
https://store.office.com/search.aspx?productgroup=SharePoint&qu=news&ui=en-US&rs=en-US&ad=US&page=1&order=0&direction=0
https://store.office.com/lwb-news-rotator-app-WA104379045.aspx?assetid=WA104379045
https://store.office.com/corporate-news-WA104033744.aspx?assetid=WA104033744
https://store.office.com/news-slider-pro-WA104362327.aspx?assetid=WA104362327
https://store.office.com/simplenews-WA104019122.aspx?assetid=WA104019122
https://store.office.com/news-huddle-WA104379096.aspx?assetid=WA104379096
https://store.office.com/repoint-news-WA104146068.aspx?assetid=WA104146068
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Where to find the personalization api

where to find the personalization api

Does someone know a URL or place where I could find it ?
>
You might want to check this web page out:
http://www.jongware.com/idjshelp.html
Harbs
http://www.in-tools.com

CS3 -- I can't find the Eraser Tool

I am new to CS3, but I'm not a total greenie in photo editing after working with Jasc & Corel over the past few years. This one is starting to make me feel stupid. Maybe I'm having a brain cramp. I see the Background Eraser Tool, but after searching high and low, I can't find the Eraser Tool. Where is the little bugger hiding???

Click and hold (or ALT+Click) on ALL the icons in the Toolbox that show a little tiny triangle on their buttons. LOTs of grouped (some call them "hidden". I don't...) tools.
Anywhere you see just about ANY little icon, button, arrow or tiny triangle, try clicking and/or ALT+Clicking on them to see what secrets they hold.
Also, have a look at EVERY Menu item, and give them a try. Just don't "Save" and close your image and you will always be able to go back to your original unedited state by clicking the image at the very top of your History Palette.
Don't forget to give the Help files a thorough scan while you're exploring, too.

Issue when starting the config tool

Hi Everyone,
When I have started the Config tool, the "SAP J2EE engine - Config tool" screen comes up. Then I have a pop up which says that "Do you want to use the default DB settings". When given "Yes", it goes connecting to database. During this time I receive the following error message in the command prompt and config tool screen disappears.
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.librar
y.path
Exception occurred in openJar(
10.176.34.95\rootbin\usr\sap\QSR\DVEBMGS00\j2ee\
configtool\usr\sap\QSR\SYS\jdbc\tbx\jt400.jar) :
java.io.FileNotFoundException:
10.176.34.95\rootbin\usr\sap\QSR\DVEBMGS00\j2ee
\configtool\usr\sap\QSR\SYS\jdbc\tbx\jt400.jar (The system cannot find the path
specified)
I have mentioned JAVA_HOME in the enviromental variables as well.
I am able to start visual admin successfully.
I am currently with java version jre1.6.0_05.
Please assist on the issue.
Thanks and Regards

Hi,
Thanks for the reply. I have mapped the network drive (Rootbin on 'OS/400) on to my local machine, now I am able to login config tool, but comes up with different error.
Error occured while working with Configuration (Scanning)
Msg: Error while connecting to DB
I am able to see only the secure store in the config tool.
Please provide your thoughts.
Thanks and Regards

Can some tell me where to find the documentation for Oracle forms 6i,11g

Hi Everyone
Can someone please tell me where to find the online documentation for Oracle Forms 11g and 6i .
Thanks in advance
Gautam

Most of the design time documentation is included in the Design-time tools (Builders). Specifically in the Builder Online Help. This information is no longer available on a web site. As for Forms 6i, hardly any of that information is available on the Oracle site any longer. That version has been obsolete for several years. You can find some of the old deployment documentation for 6i (6.0.8):
http://www.oracle.com/technetwork/developer-tools/forms/documentation/techlisting-084882.html

I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
TheOne

You need a DATA service enabled by your carrier to be able to send e-mail via thier network. Do you have a data plan with your carrier ? If so - is it enabled ?
Can you access internet thru your network (not wifi) ?

HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

Where to find the "Config tool"

Similar Messages

Maybe you are looking for