Where to find the information regarding relationships between the tables?

I am developing a Windows based app which among other things let’s users view SAP table schema and relationships.
If I use SAP GUI and dig up a bit on say the MARA table I can see that
Material Master (MARA) is related with
1) MaterialDescription (MAKT) on columns MANDT and MATNR
2) MaterialPlantData (MARC) on columns MANDT and MATNR
and so on…
My question is - in which table the information regarding relationships between the tables is stored? There must be a data dictionary table which would be storing the relationships data. Which is it? Note: I will programatically access the table, NOT from the UI.

Thanks a lot...
I am still working on it, but here are the current findings. DD05S, DD08L and DD08T: The schemas for these tables were very promising for the thing I was looking for. Unfortunately the data within dose not seem to serve my exact purpose.
I found another one DD26S, which has almost 90% of the relationships I wish to explore. Do you know what is it supposed to contain?
Thanks a lot for your help.
Message was edited by: Salil Khedkar

Similar Messages

  • HT1212 where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    You use iTunes and restore the phone from Recovery Mode. You will lose all content. http://support.apple.com/kb/HT1808

  • What is the relationship between the SAP BC and XI?

    Hi Friends,
    What is the relationship between the SAP BC and XI?
    Regards
    Sam

    Hi Samuel Melvin ,
    The SAP BC is basically WebMethod's product supplied free of charge to SAP customers.
    SAP XI is a purchased product from SAP that can be used to integrate multiple systems, you would need to contact your SAP Account rep to discuss licensing issues. You cannot download it for free from sapnet.
    It is probably more relevant to discuss the comparison between these solutions based on a specific scenario, but here are some basic differences. Obviously, the foremost one being that the SAP Exchange Infrastructure (XI) belongs to the SAP Netweaver technology suite, whereas Business Connector although bundled by SAP is really a Integration tool provided by Web Methods.
    Being a Netweaver solution the SAP XI is central in design and configuration. The SAP XI is really integrated as a required solution for some of new mySAP solutions like SRM. For example, the mySAP SRM business scenario for Supplier Self Services in EBP requires the implementation of SAP XI, the Business connector cannot be utilized to replace this scenario. Although the SAP Business Connector can still be utilized with SRM for all XML based communication. Both mySAP SRM and XI runs natively on the SAP WebAS Server.
    The Business Connector is a point to point solution that provides messaging and routing. Currently a number of organizations using the Business Connector utilize it to communicate between its partners using XML based messaging. This can be achieved using SAP XI as well, but SAP's strategy is to utilize XI as a central hub for messaging, routing, and communication between all SAP, non-SAP systems as well as partners. As SAP XI is a relatively new solution, organizations that are looking for communicating with their partners to exchange XML based documents or other point-to-point scenarios can still utilize SAP Business connector.
    Initially, when SAP announced the SAP XI, there was a notion that SAP Business Connector would be phased out and SAP XI would be the solution utilized hereon. But SAP will continue to support the Business Connector, the SAP Exchange Infrastructure will remain as the SAP's strategic integration solution. All new and or updated SAP solutions will make use of the XI for all process-centric, message based integration. As upgrades are scheduled and new solutions deployed we'll see the mandated need for XI but currently the only solution that natively requires SAP XI is mySAP SRM 2.0.
    It will be interesting to see how organizations that already utilize SAP Business Connector warm up the SAP XI idea. But for the most part they will not have a choice really, as the new mySAP products are going to natively require the use of SAP XI for all process-centric integration between the different SAP solutions. But there is no reason why organizations cannot continue to utilize the SAP Business Connector for all point-to-point solutions already deployed with possibly document exchange and partner integration. Hope this helps.
    These web-sites may help u in understanding XI & BC
    Understanding SAP XI SEEBURGER
    http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
    http://www.t2b.ch/Flyers/t2b%20SAP%20Xi%20Flyer.pdf
    SAP Exchange Infrastructure (BC-XI)
    http://help.sap.com/saphelp_srm30/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/content.htm
    webMethods for SAP
    http://www1.webmethods.com/PDF/webMethods_for_SAP-wp.pdf
    http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
    cheers!
    gyanaraj
    ****Reward points if u find this helpful

  • Relationship between the workflows what have been triggered frm parent workflow using container step

    Hi All,
    There is a scenario in CQ5.5 where "Workflow A" has container step to initiate another "Workflow B" from it. Now the requirement is to identity the Workflow A's instance ID in "Workflow B".
    Being quite unable to find any relationship between the workflows what have been triggered from parent workflow using container step.
    Could any one share the pointers for the same?
    Thanks in advanced.
    Regards,
    Saurav Jain
    7428081341

    Please do not keep reposting this.
    Those of us that answer questions here are volunteers ... not paid Oracle employees.
    If no one answered your question to your satisfaction it is either because they choose not to, don't know the answer, or because lacking a version number no one knows to what version you are referring.
    My recommendation is that you go to http://asktom.oracle.com where you will find extremely good explanations of cursor sharing.
    Thank you.

  • Error while adding a used relationship between the New DC and the Web DC

    Hi Gurus
    We are getting the Error in NWDS while Adding  a used relationship between the New DC and the Web DC.
    Steps what we are Done
    1. Create the custom project from inactiveDC's
    2.creating the project for the component crm/b2b in SHRAPP_1
    3.After that we changed the application.xml and given the contect path.
    4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
    so, we skip this step and tried to create the build then it is saying that build is failed..
    Please help us in this regard.
    Awaiting for ur quick response...
    Regards
    Satish

    Hi
    Please Ignore my above message.
    Thanks for ur Response.
    After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the  projects was also sucessfully done and  EAR file was created.
    We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
    For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
    In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
    When i  right click on my activity Id the deployment summery is also disabled.
    So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
    Any pointers in this regard would be of great help..
    Awaiting for ur valuble Responses..
    Regards
    Satish

  • How to identify the follow up relationship between two service ticket

    Hi Folks,
    How to identify the follow up relationship between two service ticket ?
    Please help me on this...
    Regards,
    Shashi K, Reddy

    Hi Pepe !
    Thank you for the answer, but I dont find this structure ET_DOC_FLOW.....
    Please let me know is that structure is correct ......
    Regards,
    Shashi K, Reddy
    shashikumarreddy at gmail dot com

  • Re: What is the relationship between the JTA Server Timeout and

    Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
              There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
              change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
              -- Rob
              Tom Gerber wrote:
              > What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
              >
              > Does the EJB's timeout have to be >= the servers to take effect?
              >
              > We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
              >
              > Is this correct behavior?
              >
              > We are on WL 6.0 sp1
              >
              > Thanks
              >
              > Tom
              

    Sorry, you cannot query for known bugs yet.
              Work is in progress :)
              Kumar
              Tom Gerber wrote:
              > Is there a place on the WebSupport site for WebLogic that I can query
              > for know issues for WL 6 sp1?
              >
              > I tried the Find Solutions but didn't find much.
              >
              > Thanks
              >
              > Rob Woollen wrote:
              >
              > > Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
              > >
              > > There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
              > > change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
              > >
              > > -- Rob
              > >
              > > Tom Gerber wrote:
              > >
              > >> What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
              > >>
              > >> Does the EJB's timeout have to be >= the servers to take effect?
              > >>
              > >> We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
              > >>
              > >> Is this correct behavior?
              > >>
              > >> We are on WL 6.0 sp1
              > >>
              > >> Thanks
              > >>
              > >> Tom
              > >
              

  • Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

    Hi,
    SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
    But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
    the SharePoint Logs I found out the below exception
    11/30/2011 12:14:53.78  WebAnalyticsService.exe (0x06D4)         0x2D24 SharePoint Foundation          Database                     
     8u1d High     Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15' 
    11/30/2011 12:14:53.78  WebAnalyticsService.exe (0x06D4)         0x2D24 SharePoint Foundation          Topology                     
     2myf Medium   Enabling the configuration filesystem and memory caches. 
    11/30/2011 12:14:53.79  WebAnalyticsService.exe (0x06D4)         0x12AC SharePoint Foundation          Database                     
     8u1d High     Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15' 
    11/30/2011 12:14:53.79  WebAnalyticsService.exe (0x06D4)         0x12AC SharePoint Foundation          Topology                     
     2myf Medium   Enabling the configuration filesystem and memory caches. 
    11/30/2011 12:14:55.54  mssearch.exe (0x0864)                    0x2B24 SharePoint Server Search       Propagation Manager          
     fo2s Medium   [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes)  [indexpropagator.cxx:1607]  d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx 
    11/30/2011 12:14:55.99  OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Topology                     
     75dz High     The SPPersistedObject with
    Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
    domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
    sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()    
    at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip... 
    11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Topology                     
     75dz High     ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)    
    at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
    persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state) 
    11/30/2011 12:14:56.00  OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Topology                     
     8xqx High     Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.   
    11/30/2011 12:14:56.00  OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Timer                        
     2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
    sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
    targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
    T denyRightsMask)     at Microsoft.SharePoint.Administrati... 
    11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Timer                        
     2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()    
    at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
    id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
    currentVe...
    Please guide me on the above issue ,this will be of great help
    Thanks.

    I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped. 
    The problem is caused by User profile Synch Service:
    UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
    The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
    Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
    targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
    identifier, T grantRightsMask, T denyRigh...        
    08/23/2014 13:00:20.96*        w3wp.exe (0x2204)                      
            0x293C        SharePoint Portal Server              User Profiles                
            eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)    
    at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
    Please let me know if you any solution found for this?
    Regards,
    Kunal  

  • Creating a relationship between one table and the PK in another

    Sorry the subject of this message is a bit vague. I'm not sure how to describe this problem in one sentence.
    So here's the issue: I've just created a new block on my form based on table2. Table2 contains t1_id which is the FK link to Table1.
    What I want is when one of the fields in Table2's block is changed and inserted, the t1_id is inserted in the applicable row. Essentially, I need :table2.t1_id to have the 'Copy From Item' property set at :table1.id
    I cannot seem to see where in designer this option is. I asked a friend and he said what I need to do is 'create a relationship between the two values in designer'. Huh? In the Table Definitions the FK is set for the two, so I'm not sure how to do this.
    Another problem, which I'm believing will be solved when this is, is that when the form loads, this new block, table2, is not automatically populated with the applicable values from the table.
    Thanks for any help. It's greatly appreciated!

    Do you mean that you want to create a Master-Detail Form using Designer?
    If yes, you need to define the entity usage from the Function Hierarchy Diagrammer, then attribute usage definition. Generate the module using Application Design Transformer. You need to define the Context so that master table's PK will be carried over to the detail table.

  • Where to find old thread/post and closed the thread

    where to find old thread/post and closed the thread
    i try to search by email id, by userid but no results display at all only new post are shown

    Hi,
    where to find old thread/post and closed the thread
    i try to search by email id, by userid but no results display at all only new post are shownMake sure that u have specified the Correct date range parameter as required.
    Regards,
    X A H E E R

  • PS-Relationship between the system status in wbs elements and activities.

    Relationship between the system status in wbs elements and activities.
    We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
    The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
    Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
    Thanks in advance.

    Hi Bala
    Yes, you have put it rather correctly.
    We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
    I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
    I hope it's clearer now.
    Vinitha.

  • Nexus 6004 EIGRP Relationship between the two switches

    Hi All,
    I will try to explain this as best as I can. In our current TEST LAB we have a Pair of Cisco ASA5585x running in Active/Passive mode. We use a VRF transit to connect the 10 GB interface to a Pair of Cisco Nexus 6004 (L3) switches running vPC between them. Downstream we also have a pair of Cisco 9372 switches (L2) also running vPC between the two.
    As of right now we have EIGRP neighbor relationship formed between the two N6K's and the ASA.
    ASA
    ciscoasa# sh eigrp neighbors
    EIGRP-IPv4 neighbors for process 100
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    1 172.16.230.9 Te0/8.451 12 01:30:25 1 200 0 52
    0 172.16.230.10 Te0/8.451 12 01:30:25 1 200 0 48
    The ASA formed relationship with both N6K's
    SWITCH1
    Nexus6-1# sh ip eigrp neighbors vrf inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    0 172.16.8.3 Vlan680 11 01:28:28 1 50 0 45
    1 172.16.230.10 Vlan451 13 01:28:28 1 50 0 46
    2 172.16.230.11 Vlan451 10 01:28:00 4 50 0 13
    Nexus6-1#
    SWITCH2
    Nexus6-2# sh ip eigrp neighbors vrf Inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    2 172.16.8.2 Vlan680 14 01:30:11 23 138 0 48
    0 172.16.230.9 Vlan451 13 01:30:11 480 2880 0 50
    1 172.16.230.11 Vlan451 13 01:29:48 1598 5000 0 13
    Nexus6-2#
    Both Nexus Switches formed EIGRP neighbors using the vPC Peer-Link. There is enough documentation out there that strongly suggest not to use vPC Peer-Links for EIGRP anything.
    We do have additional interfaces available on the 6K's that we can use as a cross connect for EIGRP. What we are having trouble understanding how we can force EIGRP traffic over those ports?
    Here is a complete Switch config:
    Switch1
    Nexus6-1# sh run
    feature telnet
    cfs eth distribute
    feature eigrp
    feature interface-vlan
    feature lacp
    feature vpc
    feature lldp
    vlan 1
    vlan 451
    name P2P_VRF_SVI
    vlan 652
    name Management
    vlan 680
    name Inside
    vrf context Inside
    vrf context management
    ip route 0.0.0.0/0 172.16.52.1
    vrf context peer-keepalive
    vpc domain 99
    role priority 1
    peer-keepalive destination 10.200.50.2 source 10.200.50.1 vrf peer-keepalive
    delay restore 120
    interface Vlan1
    interface Vlan451
    description Inside p2p to ASA
    no shutdown
    vrf member Inside
    ip address 172.16.230.9/29
    ip router eigrp 100
    no ip passive-interface eigrp 100
    interface Vlan651
    interface Vlan680
    description Inside Network
    no shutdown
    vrf member Inside
    ip address 172.16.8.2/22
    ip router eigrp 100
    interface port-channel99
    switchport mode trunk
    spanning-tree port type network
    vpc peer-link
    interface port-channel102
    switchport mode trunk
    vpc 102
    interface Ethernet1/1
    description vPC Peer Link 1.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet1/6
    interface Ethernet1/7
    description vPC Peer Link 1.7 to Nexus 9372 PRI
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet1/8
    interface Ethernet1/9
    interface Ethernet2/1
    description vPC Peer Link 2.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet2/2
    interface Ethernet2/7
    description vPC Peer Link 2.1 to Nexus SEC
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet2/8
    interface Ethernet8/1
    description keep-alive peer-link to ALNSWI02
    no switchport
    vrf member peer-keepalive
    ip address 10.200.50.1/30
    interface Ethernet8/2
    description Uplink to ASA
    switchport mode trunk
    interface Ethernet8/3
    interface mgmt0
    vrf member management
    ip address 172.16.52.3/23
    line console
    line vty
    boot kickstart bootflash:/n6000-uk9-kickstart.7.0.1.N1.1.bin
    boot system bootflash:/n6000-uk9.7.0.1.N1.1.bin
    router eigrp 100
    passive-interface default
    default-information originate
    vrf Inside
    autonomous-system 100
    default-information originate
    poap transit
    Nexus6-1#
    Nexus6-1# sh ip eigrp neighbors vrf inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    0 172.16.8.3 Vlan680 11 01:28:28 1 50 0 45
    1 172.16.230.10 Vlan451 13 01:28:28 1 50 0 46
    2 172.16.230.11 Vlan451 10 01:28:00 4 50 0 13
    Nexus6-1#
    Nexus6-1# sh ip eigrp topology vrf Inside
    IP-EIGRP Topology Table for AS(100)/ID(172.16.8.2) VRF Inside
    Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
    r - reply Status, s - sia Status
    P 172.16.8.0/22, 1 successors, FD is 2816
    via Connected, Vlan680
    P 172.16.230.8/29, 1 successors, FD is 2816
    via Connected, Vlan451
    Nexus6-1# sh vpc
    Legend:
    (*) - local vPC is down, forwarding via vPC peer-link
    vPC domain id : 99
    Peer status : peer adjacency formed ok
    vPC keep-alive status : peer is alive
    Configuration consistency status : success
    Per-vlan consistency status : success
    Type-2 consistency status : success
    vPC role : primary
    Number of vPCs configured : 1
    Peer Gateway : Disabled
    Dual-active excluded VLANs : -
    Graceful Consistency Check : Enabled
    Auto-recovery status : Disabled
    vPC Peer-link status
    id Port Status Active vlans
    1 Po99 up 1,451,652,680
    vPC status
    id Port Status Consistency Reason Active vlans
    102 Po102 up success success 1,451,652,6
    80
    Nexus6-1# sh spanning-tree
    VLAN0001
    Spanning tree enabled protocol rstp
    Root ID Priority 32769
    Address 1005.caf5.88ff
    Cost 2
    Port 4197 (port-channel102)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 32769 (priority 32768 sys-id-ext 1)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    Eth8/3 Desg FWD 2 128.1027 P2p
    VLAN0451
    Spanning tree enabled protocol rstp
    Root ID Priority 33219
    Address 8c60.4f2d.2ffc
    This bridge is the root
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 33219 (priority 32768 sys-id-ext 451)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Desg FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    VLAN0652
    Spanning tree enabled protocol rstp
    Root ID Priority 33420
    Address 1005.caf5.88ff
    Cost 2
    Port 4197 (port-channel102)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 33420 (priority 32768 sys-id-ext 652)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    VLAN0680
    Spanning tree enabled protocol rstp
    Root ID Priority 33448
    Address 1005.caf5.88ff
    Cost 2
    Port 4197 (port-channel102)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 33448 (priority 32768 sys-id-ext 680)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    Nexus6-1#
    Switch2
    Nexus6-2# sh run
    !Command: show running-config
    !Time: Sat Feb 12 19:02:44 2011
    version 7.0(1)N1(1)
    hostname Nexus6-2
    feature telnet
    cfs eth distribute
    feature eigrp
    feature interface-vlan
    feature lacp
    feature vpc
    feature lldp
    vlan 1
    vlan 451
    name P2P_VRF_SVI
    vlan 652
    name Management
    vlan 680
    name Inside
    vrf context Inside
    vrf context P2P_Inside_VRF
    vrf context management
    ip route 0.0.0.0/0 172.16.52.1
    vrf context peer-keepalive
    vpc domain 99
    role priority 2
    peer-keepalive destination 10.200.50.1 source 10.200.50.2 vrf peer-keepalive
    delay restore 120
    interface Vlan1
    interface Vlan451
    description Inside p2p to ASA
    no shutdown
    vrf member Inside
    ip address 172.16.230.10/29
    ip router eigrp 100
    no ip passive-interface eigrp 100
    interface Vlan680
    description Inside Network
    no shutdown
    vrf member Inside
    ip address 172.16.8.3/22
    ip router eigrp 100
    interface port-channel99
    switchport mode trunk
    spanning-tree port type network
    vpc peer-link
    interface port-channel102
    switchport mode trunk
    vpc 102
    interface Ethernet1/1
    description vPC Peer Link 1.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet1/2
    interface Ethernet1/6
    interface Ethernet1/7
    description vPC Link 1.7 to Nexus 9372 SEC
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet1/8
    interface Ethernet1/12
    interface Ethernet2/1
    description vPC Peer Link 2.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet2/2
    interface Ethernet2/6
    interface Ethernet2/7
    description vPC Link 2.1 to Nexus PRI
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet2/8
    interface Ethernet2/12
    interface Ethernet8/1
    description keep-alive peer-link to ALNSWI01
    no switchport
    vrf member peer-keepalive
    ip address 10.200.50.2/30
    interface Ethernet8/2
    description Uplink to ASA
    switchport mode trunk
    switchport trunk allowed vlan 1,451,652,680
    interface Ethernet8/3
    interface Ethernet8/20
    interface mgmt0
    vrf member management
    ip address 172.16.52.4/23
    line console
    line vty
    boot kickstart bootflash:/n6000-uk9-kickstart.7.0.1.N1.1.bin
    boot system bootflash:/n6000-uk9.7.0.1.N1.1.bin
    router eigrp 100
    vrf Inside
    autonomous-system 100
    default-information originate
    poap transit
    logging logfile messages 6
    Nexus6-2#
    Nexus6-2#
    Nexus6-2# sh ip eigrp neighbors vrf Inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    2 172.16.8.2 Vlan680 14 01:30:11 23 138 0 48
    0 172.16.230.9 Vlan451 13 01:30:11 480 2880 0 50
    1 172.16.230.11 Vlan451 13 01:29:48 1598 5000 0 13
    Nexus6-2#
    Nexus6-2# sh ip eigrp topology vrf Inside
    IP-EIGRP Topology Table for AS(100)/ID(172.16.8.3) VRF Inside
    Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
    r - reply Status, s - sia Status
    P 172.16.8.0/22, 1 successors, FD is 2816
    via Connected, Vlan680
    P 172.16.230.8/29, 1 successors, FD is 2816
    via Connected, Vlan451
    Nexus6-2#
    Nexus6-2#
    Nexus6-2# sh vpc
    Legend:
    (*) - local vPC is down, forwarding via vPC peer-link
    vPC domain id : 99
    Peer status : peer adjacency formed ok
    vPC keep-alive status : peer is alive
    Configuration consistency status : success
    Per-vlan consistency status : success
    Type-2 consistency status : success
    vPC role : secondary
    Number of vPCs configured : 1
    Peer Gateway : Disabled
    Dual-active excluded VLANs : -
    Graceful Consistency Check : Enabled
    Auto-recovery status : Disabled
    vPC Peer-link status
    id Port Status Active vlans
    1 Po99 up 1,451,652,680
    vPC status
    id Port Status Consistency Reason Active vlans
    102 Po102 up success success 1,451,652,6
    80
    Nexus6-2#
    Nexus6-2#
    Nexus6-2# sh spanning-tree
    VLAN0001
    Spanning tree enabled protocol rstp
    Root ID Priority 32769
    Address 1005.caf5.88ff
    Cost 3
    Port 4194 (port-channel99)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 32769 (priority 32768 sys-id-ext 1)
    Address 8c60.4f2d.777c
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Root FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    Eth8/3 Desg FWD 2 128.1027 P2p
    VLAN0451
    Spanning tree enabled protocol rstp
    Root ID Priority 33219
    Address 8c

    Jon,
    Are you ready for the mass confusion?
    when Looking at the ASA EIGRP neighbors output here is what I see.
    ASA# sh eigrp neighbors
    EIGRP-IPv4 neighbors for process 100
    H   Address                 Interface       Hold Uptime   SRTT   RTO  Q  Seq
                                                (sec)         (ms)       Cnt Num
    3   172.16.230.1            Te0/8.450        13  16:45:14 1    200   0   64
    2   172.16.230.2            Te0/8.450        11  16:45:14 1    200   0   84
    1   172.16.230.10           Te0/8.451        11  16:45:20 1    200   0   178
    0   172.16.230.9            Te0/8.451        13  16:45:20 1    200   0   148
    For simplicity sake lets just concetrate on Interface TenGigabit0/8.451 which is the SVI on the Nexus switch that is VLAN451
    From the Nexus Switch 6004 that is directly connected to the ASA here is what I see
    SWI01# sh ip eigrp neighbors vrf Inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H   Address                 Interface       Hold  Uptime  SRTT   RTO  Q  Seq
                                                (sec)         (ms)       Cnt Num
    0   172.16.8.3              Vlan680         10   17:04:30  54   324   0   177
    1   172.16.230.10           Vlan451         11   16:59:10  819  4914  0   178
    2   172.16.230.11           Vlan451         14   16:53:48  24   144   0   20
    The Inside VRF that is tied to both SVI's on the Switch vlans 451 and 680 is in EIGRP 100 on the switch
    SWI01# sh run int vlan 451
    interface Vlan451
      description Inside p2p to ASA
      no shutdown
      vrf member Inside
      ip address 172.16.230.9/29
      ip router eigrp 100
      no ip passive-interface eigrp 100
    SWI01# sh run int vlan 680
    interface Vlan680
      description Inside Network
      no shutdown
      vrf member Inside
      ip address 172.16.8.2/22
      ip router eigrp 100
      hsrp 1
        authentication text test
        preempt
        priority 250
        ip 172.16.8.1
    so you with me so far?
    If you are you have noticed that on the ASA neighbors the ASA sees 172.16.230.11 as a neighbor which is the Secondary Nexus SW. That is becauise they all share the same subnet.
    172.16.230.8/29
    Brakedown:
    PRI Nexus 6004 - 172.16.230.9
    SEC NEXUS 6004 - 172.16.230.10
    PRI ASA 5585x  - 172.16.230.11
    SEC ASA 5585x  - 172.16.230.12
    Because the ASA EIGRP network is a /29 it learns the Secondary Nexus via the Primary Nexus.
    I am not sure that the link we created between the two Nexus Switches is doing anything but consuming ports right now.
    SWI01# sh run int ethernet 8/9
    interface Ethernet8/9
      description EIGRP PORT to Secondary Nexus
      switchport mode trunk
      switchport trunk allowed vlan 450-451
    SWI02# sh run int ethernet 8/9
    interface Ethernet8/9
      description EIGRP PORT to Primary Nexus
      switchport mode trunk
      switchport trunk allowed vlan 450-451
    So the SVI's that go up to the ASA for inspection are 450 and 451. The network SVI's are 600 and 680 all of them live on the switch, and 680, and 600 are extended over the peer links down to the 9372's.
    I think that we are breaking the golden rule of vPC BUT.. I am not 100% sure. Some of the documents read that we should not be allowing network vlans over peer links, but then how do you extend the vlans down to the leaf switch?
    This is giving me nightmares at the moment…
    does this make sense? 

  • Relationship between the "Stage" and the "preLoader"

    Other than the "preLoader" loading the project what is the relationship between the 2 elements in the project. Is the "preLoader" on the stage? is there a "stage" for the preloader ?
    In css markup in my html file to I need to deal with them seperately if I want to move there loaction?
    I use...
    sym.$("#Stage").css({"margin": "auto"})
    in compReady to center my stage. I tried do this with the preloader but it doesn't work. The stage is centered but the preloader off to the left.  Is there some code I can add to the project so my preloader will allways center in the same location where my stage is placed?
    If I'm using html css markup to place my "stage" how do I address the preloader so it's goverened by the same markup ?
    Also maybe this should be a seperate post question, but how would i add a timer to report preload times to the console ?
    Thanks
    Joel H

    That doesn't work all the time and sometimes it works with stage but not the preloader, especialy if I want to center vertically also like
    <style>
    #Stage {
            width:350px;
            height:350px;
            position:absolute;
            left:50%;
            top:50%;
            margin:-175px 0 0 -175px;
    </style>
    this doesn't work. But if I apply the same markup to a wrapper div it does work. like
    <style>
    #StageWrapper {
            width:350px;
            height:350px;
            position:absolute;
            left:50%;
            top:50%;
            margin:-175px 0 0 -175px;
    </style>
    then in the <body>
    <div id="StageWrapper">
    <div="Stage"  class="EDGE-blah-blah">
    </div></div>
    this works great, you just can't open your html file in edge again cause it screws your project all up.
    I was just wondering why if I was centering my stage with js in the project file why the preloader wasn't doing the same thing or how to do the same thing with js in the project file
    thanks
    Joel H

  • Something went wrong with sync. between pc and Ipad now part of the information is gone on the ipad how do I put the backup from the pc to the ipad

    Something went wrong with sync. between pc and Ipad now part of the information is gone on the Ipad. How do I take the backup of the pc and put it back on the Ipad.

    Same thing just happened to me.  Help!

  • An anyone help me to find the difference and relation between the following

    Hi,
    can anyone help me to find the difference and relation between the following methods of Swing :
    a) validate()
    b) invalidate()
    c) revalidate()
    d) repaint()

    You'd be far ahead by opening up the API and Java turorial and your course book and learning for yourself, rather than, asking other to do your homework for you.
    But if you have andwers already to go, then post them and ask if you have drawn appropriate conclusions.

Maybe you are looking for