Where to find the Logfile to troubleshoot the problem?

Hi,
I having some problem while login to SAPGUI. Waiting for response. ESS login return blank page. So i restarted my SAP R/3 server. I need to check what is the problem, may i know where can i find the logfiles? and how to trace what could be the cause? Thanks.
Regards,
LG

Hi Lay,
You can check SM21 and ST22 for log's and dumps. Where as in your case you try to probe in the network for GUI and system browser in the ESS case(is catche is full?). Further you can search the SDN with the symptoms which you are getting.
Regards,
Hari.

Similar Messages

HT204266 Article isn't correct anymore, can you tell me where to find Nano G5 games on the Apple store now? Please send me a link?

Article isn't correct anymore, can you tell me where to find Nano G5 games on the Apple store now? Please send me a link?

Try posting in the iPod Nano forum. You posted in the iPod touch forum.

Can anyone tell me where to find an install guide for the Liveoffice app.

Can anyone tell me where to find an install guide for the Liveoffice app.
Thanks
Jeff

Hi Jeff,
You can download the install guide for Liveoffice application from the link provided below,
http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
Hope this helps you.
Regards,
Abhijeet T.

I bought a second license and I can't find the serial number, I have tried to contact adobe like 4 times and got no luck. Any help on where to find it? is it the same serial as the first copy we have?

I bought a second license and I can't find the serial number, I have tried to contact adobe like 4 times and got no luck. Any help on where to find it? is it the same serial as the first copy we have?

Hello,
This order no is for subscription of Adobe Captivate 8. In order to install subscription you need not to enter any serial key .During the installation it will prompt you to enter your Adobe Id and it will validate your subscription after validating your Adobe Id from the server. I mean you have to sign in with your Adobe Id during the installation which you have used at the time of purchasing the subscription.
So for installation and activation you dont need any serial key . Just sign in and it will automatically activate your subscription .
For more information on subscription please click on the link below.
http://www.adobe.com/in/products/captivate/faq.html#subscription
Regards,
Rajeev.

Ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either. Any suggestions?

ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either. Any suggestions?

Does it light up at all? If not, you could have a battery issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Where 2 find java file that implements the subscription email notification?

Hello KMC Gurus,
I saw a reply of Patricio linking to an article relating to "How to customize mail notifications?".
In that article I was able to see how to change the XML & XSL files and their locations.
Can anybody tell me where to find this java/class file relating to this mail notifications?
FYI, the link to the article is as below
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/90626697-0901-0010-2ca7-86e2a50ce70d
Author is Darin Krasle.
best regds,
Vedu

I've just installed JAVA into my computer.
Then I found a folder called "Java 1.4.2 SDK" or
something like that. but in the folder there wasn't
any .exe file to run JAVA, os i would like to know how
do i run JAVA after i installed it?
Also i am runnung Java in Windows XP with SP1
I think those information might help.Follow this link and do what it says. Generally, you do not need an IDE to run java, just a text editor and a DOS prompt :)
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html
Alpha

Where to find Devices tab and enter the printer's claim code????????

Just finished setting up the printer. Hooray it was easier than I thought. But now I have a print out that said I need to create an account. I already have an account so I signed in. But I cannot find the Devices tab or where to enter the printer's claim code. Could someone from HP or another user assist me. I would greatly appreciate the assistance and I wish to thank you in advance.

Hi,
If you already have an account (HP Connected account). When you sign in, the Devices tab is the one at the right end of 4 tabs. Otherwise please Sign Up from the following link:
https://www.hpconnected.com/us/en???localeDetected=true
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Where to find MySQL / ClearDB database in the Full Portal?

I have created a MySQL database, backed by ClearDB, in the Azure Preview portal (portal.azure.com) but I cannot see it anywhere in the full portal (manage.windowsazure.com). Where is it? Thanks.

Hi Borek,
Thanks for posting here.
On the Azure management portal (https://www.manage.windowsazure.com) you will see the MySQL/ClearDB located on
Add-ons services on the left pane.
On the preview portal (portal.azure.com), you will find it under Active on the left pane. This will provide complete details on all the services which are created and its status.
Ref:
http://azure.microsoft.com/en-us/documentation/articles/store-php-create-mysql-database/
Hope this helps you.
Girish Prajwal

Where to find company related details in the transaction Me42

I am reteriving the address like this Use table EKKO find the Bukrs field,use this field to find the adrnr field from the table ADRC. From adrc reterieve the values.
Where do i find the company related details in the transaction Me42

Hi,
In Tcode: ME42, enter the request for quotation number (RFQ) and press enter. System will take you to 'Item Overview' screen. From menu select 'Header' -- 'Details' or press F6. Then the system will take you to 'Header screen' there you can see the 'company code' after RFQ number field.
Or
Directly from Tcode: ME42, enter the request for quotation number,then from menu select 'Header' -- details. Here you can have the company code field.
The data for company here too will get updated in table and field EKKO-BUKRS.
Hope this helps.
Thanks,
Viswanath

Where to find FPGA trim report of the compiler

I have problem when compiling my FPGA VI for cRIO 9101.
It seems that some of my signal is trimmed, but I can not find the trim report.
Also, I don't know what kind of problem in VI may generate this issue. My original VI was OK under LV 8.0 (FPGA). But I got Slices overloading (108%) under LV 8.20. After changing several front panel clusters into constant values, I reduced the slices to 90%, and nothing else is used more than 80%. However is still have this problem.
The error message is here:
++++++++++++++++++++++++++++
Using target part "2v1000fg456-4".
Mapping design into LUTs...
ERROR:MapLib:661 - LUT3 symbol
   "mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n00051" (output
   signal=mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n0005) has input
   signal "mytop/n_898/resVI/n_676/n_673/n_662/n_651/eo00000cbc" which will be
   trimmed. See the trim report for details about why the input signal will
   become undriven.
ERROR:MapLib:661 - LUT3 symbol
   "mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n00051" (output
   signal=mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n0005) has input
   signal "mytop/n_898/resVI/n_676/n_673/n_662/n_651/eo00000ba0" which will be
   trimmed. See the trim report for details about why the input signal will
   become undriven.
Error found in mapping process, exiting...
+++++++++++++++++++++++++++++++++++++++++

For the most part you will get a broken arrow when you have unsupported datatypes in FPGA. The saturation functions are an exception. In general, when things are correctly installed the saturation VI is really just a placeholder for the FPGA code that will need to be created for it. However, you can run the VI in emulation mode and therefore we need to define the behavior of the code for emulation mode. This behavioral code is what uses floating point numbers that you see on the block diagram of the function. We do not check for unsupported types in NI functions, because we expect them for emulation. When emulation is off and you run the VI we see that the saturation function is there and generate special functional code. However, if the VI is saved in a version without FPGA this flag is removed and we no longer generate special code for the function, but rather just generate code for the diagram the way it is (floating point and all). I have filed a CAR to the developers in order for them to catch this error earlier in the process and provide a cleaner error message.
Regards,
Joseph D.
National Instruments

Where to find OS X Lion after the Mountain Lion release?

I have an old MacBook Pro at work, and it's compatible with Mountain Lion. Currently it's running Snow Leopard, but I'd like to upgrade to Lion. Where can I find the download? Since Mountain Lion was released, Lion disapeared from the App store...

If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

Where to find MD5 or SHA1 for the JRE/JDK?

I am trying to download the latest 1.6 JRE and JDK, but I don't see any MD5/SHA1 hashes?
Anyone know where I can get these (from Oracle, not a third party).
Given recent security issues, I would be surprised if they didn't offer these.
Thanks!

That's not completely true. It depends on where you download it from. For example you can go to http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase7-521261.html#jdk-7u17-oth-JPR which will let you choose which build of 7u17 you want. You can download Windows x86 (or x64) which will download the entire offline installation. I also use http://www.filehippo.com/download_jre_32/tech/14874/ (becuase I trust it). While I download the EXEs and MSIs from oracle's website, filehippo has MD5 hashes listed. Just an idea. If you're needing a script that can get MD5 hashes you could like at using AutoIt. It has a build hashing function. The scripting language is easy to use and it has a strong community (http://www.autoitscript.com/autoit3/docs/libfunctions/_Crypt_HashFile.htm).

Where to find and how to install the exercise files.

For whatever reason they are not installed with the free trial version.

Well it won't let me paste the url but it's simply the get started series (which are abridged clips from Iynda.com apparently). The guy opens exercise files but says you can follow along without them which is what I'm attempting. If he leans too much on them further on I may need them. Your posts seem to indicate they aren't necessary. You guys used the same start up series? Know of another free source of walk throughs (without sample files Or referring to other Adobe software)? I learn best by example...
I'm hoping to learn this in order to embellish my animations done in Bryce3D as well as captured footage.

HT203167 I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

The iTunes application should be installed on the system drive. You may need to repair iTunes to fix that error regarding a missing .exe.
To organize your library properly see Make a split library portable.
If you don't have a working version of the library that can be transformed into a portable shape I have tools and techniques that can repair the broken links.
tt2

HT2688 I just want to know where to find the shared libraries on the new iTunes. These articles are a million years old, and are of no help.

I just want to know where to find my shared libraries on the stupid new iTunes. The layout was fine before, but when they changed it, I can't seem to find them. The articles on Apple are a million years old, before the latest iTunes update, so they are no help. Thanks.

carlygo wrote:
The articles on Apple are a million years old, before the latest iTunes update, so they are no help. Thanks.
It's only 7 months old and it is still correct.
ctrl B = Show sidebar.
ctrl S = Show menu.

Where to find the Logfile to troubleshoot the problem?

Similar Messages

Maybe you are looking for