Where to find the migration reports and errors
i am using Oracle SQL developer 3.0 for migrating MS SQL 2008 to oracle using migration wizard,after clicking on finish the tool throws the null as error window and asked me to look into migration reports. where should i find the migration reports and errors
KK
Edited by: 860986 on May 25, 2011 9:33 PM
Log into the SQL Developer Migration repository and you get the list of Migration Projects.
Click on the project you're interested into and on the right side you get a pane with Status, Summary, Analysis...
The Summary pane shows you how many objects SQL Dev migrated.
You also have Capture isues showing you the issued during the capture phase as well as Conversation Issues etc.
Similar Messages
-
Where to find the generated report
I have created a report and added a destination filename and destination format as html and pdf format for each one in the distribution list
I selected the distribute file and the report run to different destination but where will I find the generated report.Where to find the iExpense report log file generated on Unix? oracle applications 11.5.10.2All concurrent requests log/output files can be found under $APPLCSF/$APPLLOG and $APPLCSF/$APPLOUT directories.
Thanks,
Hussein -
Urgentpls : How to find the Oracle reports and forms version in Unix prompt
Hi,
How to find the Oracle reports and forms version in Unix prompt.
Please give the steps
ThanksI need to check the version of Oracle forms and reportsExample :$ frmcmp.sh -h | head -1
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
$ rwrun.sh 2>/dev/null | head -2 | tail -1
Report Builder: Release 10.1.2.0.2 - Production on Wed Mar 10 11:17:55 2010
$ -
Crystal Reports XI - Where to find the Merge Module and the Install Shield?
Hi,
I'm using CR XI with Delphi 2006 and I'm having problems with the client side instalation of the program.They say I have to install the Merge Modules through an Install Shield programs.
Where to find this and how to use?
Thanks!Hi,
Install shield is a part of MS Windows not with the BusinessObjects so I was not able to find any BO document on it.
I have searched over the internet and found some useful links about Install Shield for Windows:
http://gormanonline.com/blogs/msidle/archive/2008/05/02/basic-introduction-to-installshield-and-windows-installer.aspx
http://en.wikipedia.org/wiki/InstallShield
Microsoft Windows includes registry-activated logging services to help diagnose Windows Installer issues. This article describes how to enable this logging service.
Open the registry with Regedt32.exe and create the following path and keys:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
Reg_SZ: Logging
Value: voicewarmup
You can use this example:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftwindowsInstaller]
u201CLoggingu201D=u201Dvoicewarmupu201D
The letters in the value field can be in any order. Each letter turns on a different logging mode. Each letteru2019s actual function is as follows for MSI version 1.1:
v Verbose output
o Out-of-disk-space messages
i Status messages
c Initial UI parameters
e All error messages
w Non-fatal warnings
a Start up of actionsr Action-specific records
m Out-of-memory or fatal exit information
u User requests
p Terminal properties
+ Append to existing file
! Flush each line to the log
u201Cu201D - Wildcard, log all information except for the v option. To include the v option, specify u201C/lvu201C.
Once activated, the log files that are generated may be found in your %TEMP% directory.
Hope this will give you a clarification about Installation Shield for Windows.
Regards,
Deepti Bajpai -
Where to find the upgrade pricing and then download the latest photoshop elements?
I have Photoshop Elements 9 and would like to upgrade to version 11 with the upgrade price. How do I do this, please? In the store page, I see only the full price.
Hi Stephan,
I wanted to add onto Zeev's precise answer.
First of all we appreciate your feedback, we will look into why the above mentioned links are not updated as expected.
Regretfully our SDN page is a bit outdated and we are in the midst of updating it.
Currently, AccAD 2.2 SP4 as available for download and has already been adopted by some of the main SAP customers and in addition by new customers.
The release notes indicating the differences can be found as part of the installations but I hope to provide the 2.2 SP4 notes later this week - in a formal SDN announcement.
Further more as for additional updates:
- AccAD 2.3 is currently undergoing validation phase and is expected to enter Ramp Up phase in October of 2011.
- AccAD 2.3 as with every version brings with it new capabilities and increased performance and quality as well as a more up-to-date PAM.
- We are currently in the planning phase of the next AccAD version to begin development very soon and would be very happy to hear the feedback that you or any other of our customer base may have. To do so, I encourage you to contact me directly - as i cannot post an email address here - my details can be found in my business card found in this forum.
- We will be attending and presenting at SAP TechEd Las Vegas and TechEd Sapphire Madrid - we would be happy to meet up in case you will be present.
All the Best,
Smadar
Edited by: Smadar Ludomirski on Sep 11, 2011 9:29 AM -
Find the built reports without accessing analytics page in OBIEE 11g
Hi everyone,
I am working with OBIEE 11g. This week I got a problem, I am unable to start the BI Services. I just can access Weblogic Server Console and Enterprise Manager but not the analytics page where I can build dashboards, answers, agents etc.
I have done a full backup of the server where the whole BI Application resides. But after the backup, I have added many reports. I have the copy of the repository file .rpd after adding these new reports. What I am proposing now is to make a backup of the server actual state, then restore the old backup of the server and use the copy of the repository file. But it requires a lot of work to add the reports made before. Is there any way or place where to find the built reports even though the BI services are unable to start? I can acces the WLS and Enterprise Manager. If it is possible to find the reports, we can just restore to the last backup of the server and resolve the problem. Please help me.
Thank youHi ,
Check the below link which will be helpful for you.
http://docs.oracle.com/cd/E17904_01/bi.1111/e13880/T539768T526688.htm
Thanks,
Ananth -
Where to find FPGA trim report of the compiler
I have problem when compiling my FPGA VI for cRIO 9101.
It seems that some of my signal is trimmed, but I can not find the trim report.
Also, I don't know what kind of problem in VI may generate this issue. My original VI was OK under LV 8.0 (FPGA). But I got Slices overloading (108%) under LV 8.20. After changing several front panel clusters into constant values, I reduced the slices to 90%, and nothing else is used more than 80%. However is still have this problem.
The error message is here:
++++++++++++++++++++++++++++
Using target part "2v1000fg456-4".
Mapping design into LUTs...
ERROR:MapLib:661 - LUT3 symbol
"mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n00051" (output
signal=mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n0005) has input
signal "mytop/n_898/resVI/n_676/n_673/n_662/n_651/eo00000cbc" which will be
trimmed. See the trim report for details about why the input signal will
become undriven.
ERROR:MapLib:661 - LUT3 symbol
"mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n00051" (output
signal=mytop/n_898/resVI/n_676/n_673/n_662/n_651/n_645/_n0005) has input
signal "mytop/n_898/resVI/n_676/n_673/n_662/n_651/eo00000ba0" which will be
trimmed. See the trim report for details about why the input signal will
become undriven.
Error found in mapping process, exiting...
+++++++++++++++++++++++++++++++++++++++++For the most part you will get a broken arrow when you have unsupported datatypes in FPGA. The saturation functions are an exception. In general, when things are correctly installed the saturation VI is really just a placeholder for the FPGA code that will need to be created for it. However, you can run the VI in emulation mode and therefore we need to define the behavior of the code for emulation mode. This behavioral code is what uses floating point numbers that you see on the block diagram of the function. We do not check for unsupported types in NI functions, because we expect them for emulation. When emulation is off and you run the VI we see that the saturation function is there and generate special functional code. However, if the VI is saved in a version without FPGA this flag is removed and we no longer generate special code for the function, but rather just generate code for the diagram the way it is (floating point and all). I have filed a CAR to the developers in order for them to catch this error earlier in the process and provide a cleaner error message.
Regards,
Joseph D.
National Instruments -
Where to find old thread/post and closed the thread
where to find old thread/post and closed the thread
i try to search by email id, by userid but no results display at all only new post are shownHi,
where to find old thread/post and closed the thread
i try to search by email id, by userid but no results display at all only new post are shownMake sure that u have specified the Correct date range parameter as required.
Regards,
X A H E E R -
Where can I find the current time and date of Time Capsule?
I have a home network consisint of 2 x Time Capsules and 1 x Airport Express. All is working fine. I would like to set up access control for one machine connecting to the network and I can see I can do this under Access Control on the Airport Utility. My question is where can I find the current time and date setting for these devices?
I can set them to use the time.apple.com server to set the time automatically, but I can't find where to see the current time and date of the device. The only place I can see reference to the time and date is on the logs and statistics under the Advanced tab of the AirPort Untility.I don't think you can change the time and date on the TC itself, it just connects to a time server (and you set your own time zone).
-
ran hardware test and found error code 4SNS/1/40000001:YPOR-0.592 ? can't find the signification of this error code.
Back atcha!
-
w3c valid site, initially no error reported by developer toolbar. But upon right click (giving the validation menue), the the toolbar reports two errors: width and height. Despite the fact that every page is validated! On the forum for the toolbar, this is said to be a Browser error. So, how can this be fixed? I'm using FF 3.6.6
== This happened ==
Every time Firefox opened
== after update from 3.5?Hi Sara,
Can you give us the URL of the page you're having problems with and of the forum thread you mentioned?
Thanks! -
How to find the OBIEE report (Catelogue) path from BI enabled excel sheet
Dear All,
I have an excel sheet where the data is coming from BI server. How can I find the BI report name and path from the excel sheet.
Regards
MustafaSorry Friends,
May be I am not conveying the message properly.
Let me try to do it again.
I have an excel sheet which is created by somebody else and send me by mail.
This excel sheet is having connectivity to the BI server and pulling data from BI.
What I want to know is to get the BI report and view name from the excel sheet so that I can do some modification in the report.
Please not the owner of the excel file is un-reachable.
Let say I have uploaded the sample Excel in the following URL http://www.fileflyer.com/view/VSHtOA8.
This excel file is pulling data from our BI Server
Could anybody tell me the report path, name and view name from the excel file
Regards
Mustafa -
Table for finding the SHC numbers and PO numbers
Hi Guys,
Can anyone tell me where I can find the SHC number and PO number getting updated in one table.
Also If I wanted to have both the data what should I have to do?
Regards
SrujankHello Srujank,
You can use
1. Report : BBP_BW_SC2: Monitor shopping cart status
2. From Table : CRMD_ORDERADM_I get the SC item GUID & use this GUID in table BBP_PDBEI to get the follow on document (PO) number.
Hope this helps.
Thanks
Ashutosh -
Could not find a Hyperion Reporting and analysis -system 9
Dear Experts ,
i have installed Essbase and planning
i have configured work space
http://localhost:19000/worspace
when i am trying to log in to work space the following error is showing
Could not find a Hyperion Reporting and analysis -system 9 server running on Hyperion at port 6800.please verify your server connect string confirm that the server is up
i have started all Hyperion services
could you please help me in this regard,
thanks in advance
KishoreHave you installed Reporting and Analysis Services?
If you have already installed then start the Reporting and Analysis Services..
Hope this helps..
Regards,
Manmohan Sharma -
ERROR: The Importer Reported Generic Error
I just purchased PE 10 about 2 weeks ago after trial version which I installed on separate machine and utilized for Photoshop. I purchased it, because of Adobe's trusted reputation. I installed purchased copy in high end machine containing Corsair 120 Force GT SSD Sata 3 root drive with 2 additional internal 500 gb each storage drives. One WD & Seagate Barracuda at 7200 rpm.
Photoshop portion works without any glitches. PE10 reports said error message upon attempts at 95 percent of my .vob, .TS & .wmv files, which should be compatible as stated by Adobe. I am able to open same files on Windows Movie Maker and WMP.
I contacted Adobe support and was disconnected during troubleshooting by Adobe rep. Second attempt lead me to a rep who did not really have any answers or resolve. His explanation was to keep looking for files which would open only on the root drive as network drives, logical drives and external drives are not supported by Adobe. I complied and copied files to C: Drive at his request to no avail. Problem persists.
Basically, you need an enormous: Drive to accommodate the huge amount of space videos & photos normally capacitate. In my case, over 469 gigs.
Maybe it's me, but you would think Adobe would consider the fact no one in their right mind would relegate pertinent data to root drive as it is where the OS resides, thus is susceptible to crashes and data loss. Yes, OS should be partitioned separately from data, but anyone who really knows hardware, ie: hard drives, would be fully aware the entire drive can become unstable and usuable due to OS crashes.
Questions:
Why has Adobe not taken a closer look at what appears to be a proprietary issue as opposed to informing its customers that their files are corrupt?
Why does Adobe not offer fixes\resolves to importing (Get Media) issues such as addins, plugins, hotfixes, possible Codecs and\or conversion software when this is in fact their responsibility when advertising claims of compatibility with said files?
Why does Adobe not support importation of files residing in NAS External Drives and internal logical drives, as this is the direction of the end user home industry?
Has anyone in these forums actually been able to resolve ERROR Message: "The Importer Reported Generic Error"?
Please feel free to answer and\or comment on my statements\questions as I am simply a customer looking for resolve and would be more than willing to retract what I have mentioned here for some real support from Adobe.I have never had any problem, when Importing files from my NAS, but found early on, that it was too slow a process to use and edit effectively. Same for other mapped networked drives. After those initial tests, I just altered my workflow. I still use my NAS to archive my Assets, but will Copy those to my "media drive" (my D:\ on my system). My Project files are on my E:\ drive, and only my OS and programs are on C:\. Note: those are all physical HDD's, and NOT partitions. That layout works 100% for me. In my case, it was not a inability to use the NAS, or mapped networked drives (for Assets ONLY), but the speed of the gigabit (dual in my case) network being too slow for me to edit comfortably.
Premiere (both PrPro and PrE) work best with at least two physical HDD's, and even better with three.
Where Premiere has issues with networked drives will usually be where one has mapped My Documents to a networked drive, or where the user has located the working files (Scratch Disks) to a networked HDD. That situation can create issues.
I have never encountered any "Importer" error messages, and really do not recall seeing others with that issue, so cannot help there.
Good luck, and wish that I had more to offer.
Hunt
Maybe you are looking for
-
Session Replication and Session Timeout -- Urgent
WLS -4.5.1 SP 11 OS - both NT and Sol HI All The session does not seems to timeout when running the Weblogic servers in clustered mode with in-memory session replication on. This problem seems to be t
-
i have over 5000 songs on my computer. Which is from songs bought from iTunes and from cd. i had all the songs on my iPod. went to download new songs and only 1500 songs are download . please help
-
Maximum hard drive size for HP HPE-180t
Is there a way to have the entire space of a 4TB SATA III (6Gb/s) drive show up in Windows 7 x64 running on an HPE 180t? I installed one such hard drive on my HPE-180t, and the BIOS only saw 2TB of space, and the drive did not show up in Windows. H
-
Why can't i use the double-tap feature on my inspire 4g
okay on certain websites like www.tchek.com it doesn't let me log in and enter my stuff in the field like i am now in this post question box. and i cant click on anything and i can zoom in or out. this website work great on Atrix. i got this phone ju
-
Hi my itunes program crashes when i try to access the itunes store. Have tried to uninstall and reinstall to no avail.